How to give space between date mm and year in terms of bytes

Hi Guru,
In sapscript I want to give space in datae formate betweeen day and month , month and year in terms of bytes.
Example :
if datae is 2009/08/18 then I want to move like 2009 08 18. Here the gap between the date field and month , year fields is in terms of bytes. Like 4 bytes gap between year and date, 5bbytes gap between day and month in ECC6.0.
Please help in this.
Thanks,
PJ.

hii prakash,
Use the Function Module.
RP_FORMATING_DATE
If you use this FM then automatically it will convert it to YYY MM DD format and then you can use as per your requirement
or you can do like this
Use following code to change the date format from DD.MM.YYYY to YYYY MM DD
DATA : DATE(10) TYPE C,
DATE1(10) TYPE C.
CONCATENATE DATE6(4) DATE3(2) DATE+0(2)
INTO DATE1
SEPARATED BY ' '.
regards,
Shweta
Edited by: Shweta Joon on Aug 18, 2009 10:38 AM

Similar Messages

How to change space between folder icon and text on personal toolbar?

I have a few folders on the personal toolbar with just a letter to indicate what they are, but on the theme I'm using, the letter is too far away from the folder it belongs to and partially falls under the next folder icon. I don't want to increase the spacing between all icons to show the full letter, as this decreases the amount of icons you can have on the toolbar. Instead I want to decrease the space between the folder and text belonging to it, so it's right next to it instead of 5 pixels away.
I've found various entries to change padding and margins in userChrome.css, but it's always for around the icon, I don't know where to look to close the space between the icon and its corresponding text.
Any help would be greatly appreciated, thanks.

Did you check the value of the margin-left of the text?
You can set negative margin values if necessary.
<pre><nowiki>#PlacesToolbarItems .toolbarbutton-text { margin-left: -2px !important; }</nowiki></pre>
Add .bookmark-item[container] if you only need this for folder items
<pre><nowiki>#PlacesToolbarItems .bookmark-item[container] .toolbarbutton-text { margin-left: -2px !important; }</nowiki></pre>

How to reduce space between cell border and text ?

I want to make a very small print of my class timetable. But I can't reduce the table size after a certain size. The major portion is taken up due to space between the cell borders and the text in them. Is there anyway I can reduce that space so that I can make the font size a little more and still keep the table size small.

Assuming your are using Pages '09 (4.0.3) ..
First select all the cells which you wish to change.
Go to Inspector - Text Inspector, and reduce the Inset Margin

How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
Open Find/Replace and click the Object tab.
Click the Specify attributes to find button to the right of the Find Object Format: field.
Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
Click OK
Click the Specify attributes to change button to the right of the Change Object Format: field.
Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
Click OK
Click Change All

How to maintain space between table and header in ssrs

Hi Everyone,
I have created a report. In page header of this report, On First Page space between header and
body is good , but from next page, space is not maintain.
Please suggest me how to maintain space at every page of report.
Thanks.

Can you post a screenshot?
This can be achieved if you are repeating column headers on each page. Just change row height of header and align text to bottom, and make sure there is no space between Page Header and Tablix.
- Vishal
SqlAndMe.com

How to manage the space between a table and its title?

Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
1. Titles were separated by a return that is not visible... (any code is revealed by ID)
2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
Grep cannot see the end of paragraph in the tables's title.
It another method?
Basically, how to modify the space between a table and ists title

I think you and Bob are not in synch here.
Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

How do I alter the space between the Bullet and the start of a sentence?

Hello, I have recently upgraded to Pages 5.0.1, I would like to adjust the space between the bullet and the start of the sentence without having to use space as I need to save this action as part of the template that I am working on. I know the tabs at the top adjust indent but they move the bullet too, I need to change the space between the two. Thanks in advance for the help!

Please ignore this question, I found it, just wasn't used to the new layout of the inspector. For anyone else who is looking, the inspector is the pannel on the left, at the top click style, then at the bottom you will see bullets, click the arrow next to bullets to expand the options then adjust the "text" indent, note there are two indent options "Bullet" and "Text", "text" effects the space between the bullet and word and "bullet" effects the space between the margin and bullet.
Now I just need to work out how to update the default font styles in new pages and I'm back to where I was six months ago.

How to introduce Space between currencyCode and number using convertNumber in adf

Hi,
We are trying to use the af:convertNumber tag inside the af:outputText to apply the currency code in front of the number.
We would like to introduce a space between currency code and number by using the currency converter.
Sample code snippet is as below.
Eg.
<af:outputText value="#{pageFlowScope.myManagedBean.annualSalary}" id="aot8">
<af:convertNumber type="currency" currencyCode="USD"/>
</af:outputText>
Output shown from the above code is as: USD11,234.00
but we want to display as : USD 11,234.00(space after USD)
Please suggest us as what we can use to achieve the above requirements.
we are using jdev version 11.1.1.5.0 on windows 7 OS.
Thanks,
Shivaji

Timo,
if we use value="USD #{pageFlowScope.myManagedBean.annualSalary}", other default formats for the number will not work, it will treat as a string, even if we pass the number/bigdecimal type to the outputtext.
And if we write two separate output texts that will be bad way, to achieve this, as we have many fields to apply the same in our application.
Looking for better options on this.
Thanks,

ABAP webdynpro how to give spacing between the UI Elements in a view

Hi Expert,
I am very new to webdynproapplication development. I am stuck in changing the look of the ui elements of the view.
Cud anyone explain how to set the spaces between the UI Elements on a View is there any method ?
I have set the Layout property to Matrix layout. But here I am unable to set the spacing between the deffernet elements as it is taking it automaticaaly and I am not able to allign all the Elements.
Need your help!.............thank you
Moderator message: wrong forum, please have a look in the dedicated "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Apr 15, 2011 10:17 PM

Hi anushree.,
If u are using matrix layout:
In Layout Data select MatrixHeadData to display UI in next line.,
If u want to give space between UI elements in the width enter 50, 60, 70 or what ever space u want.
Also in the vGutter u can select medium , large , medium with rule to give space between UI elements.
n if u want to give space between lines ., in the height enter 30 40 or whatever spacing between lines u want.,
Matrix layout is a good layout., and u can play with colspan , hAlign, vAlign, vGutter, width and height options.,
If u dont like the layout with these options then use Grid layout., where u can give custom spacing., with the help of Left Padding, Right Padding, Top Padding, Bottom Padding.
reply if u need some more clarifications.,
Thanks & Regards
Kiran

How to create space between Header text of Hierarchical ALV List.

hi,
I am display data using Hierarchical ALV List.
In Perform of field catalog, I am writing this code:
PERFORM fill_catalogue USING :
     'CHKBX'      'T_HEADER' 20 'Sess Decision Box'(t19) 'X',
      'SESS_NO'    'T_HEADER' 11 'Session'(t20)           ' ' ,
      'SESS_STAT' 'T_HEADER' 4 'Status'(t39)            ' ',
      'HOLD_STAT' 'T_HEADER' 4 'HOLD'(t52)              ' ',
      'ICON'       'T_HEADER' 9 'Tracking'(t21)          ' ' ,
      'CREATE_DT' 'T_HEADER' 10 'Archiving Date'(t22)    ' ' ,
      'AGING'      'T_HEADER' 50 'Aging'(t23)             ' ',
      'OBJECT'     'T_HEADER' 12 'Archive Obj'(t24)       ' ',
      'HOLD_INFO' 'T_HEADER' 100 'Hold Reason'            ' ' ,
      'YFY_DATA'   'T_HEADER' 4 'Data Fiscal Year'(t48) ' ' ,
      'COMMENTS'   'T_HEADER' 50 'Session Notes'(t26)     ' ' ,
      'DATATYPE'   'T_HEADER' 50 'Archive Object Description'(t25) ' ',
      'APPR_STAT'    'T_ITEM' 16 'Approval Status'(t29)   ' ',
      'DESTR_DT_REV' 'T_ITEM' 10 'New Date'(t30)          ' ',
      'REJCT_REASON' 'T_ITEM' 60 'Rejection Reason'(t31) ' ' .
At output of this program , there are two rows in HEADER details.
I want text 'Session notes' of 2nd row under 'Archiving Date' of 1st row.
For this i have to create space between 'Data Fiscal Year' & 'Session notes' text.
How i can do this.
Regards,
Mamta

Hi,
You can use TOP-OF-PAGE event and pass this event to Hierarchical ALV FM.
Thanks,
Kartavya Kaushik.

Difference between Data-centric and Document-centric use

Hi,
Can someone suggest what exactly is the difference between Data-centric and Document-centric use and examples if any.
Thanks in advance.
Chaitanya

Maybe it helps if you look at it this way...
Document centric: document centric use of xml data is data that you always use in its complete form. If you want to use the data, then you always will retrieve it as one entity or you save it as one entity. You are not interested in the xml data / information inside this "package" / document, you are only interested in its total form. Lets say, you have an invoice which can be printed on one sheet of paper. This paper that contains you data, will always be treated in a document driven way, that is, in its total representation: information containted on a sheet of paper (document).
Data centric. data centric use of xml, is usage of data were the main interest point is focused on only pieces of the total set of xml data within a document. So instead of being interested in the whole invoice, you only are interested in information like "amount of money to be payed" or "invoicenumber".
Handling of XML data comes with (hidden) costs. Knowing how your data will be used, has to be used, is one of the first steps in designing you environment (and will have an big impact if you choose poorly). For instance, if you know that your data will always be handled (and must be stored) in a document driven way, then it will make sense to store it based on CLOB based XMLType storage. This will garantee best performance retrieval for your xml document. If you now that your xml data has to be stored so that it can be handled in a data centric way, then Object Relational XMLType storage. If conditions are setup properly data retrieval, inserts and updates will be more cost efficient then when based on CLOB XMLType storage.
There are more differences and "cost markers" when or when not to use CLOB, OR or for instance Binary XML. The first two chapters of the XMLDB Developers Guide for Oracle 11g will give you a good head start making some of those decisions. Be also aware that you probably will have to make compromises. The current state of XML, for example, doesn't have the final solution yet for a uniform storage method.
Message was edited by:
Marco Gralike

Difference between Data Grid and Data Forms

Hi all,
What is the difference between data grid and data forms.

Data entry forms are pre defined and are generally used to manually input data into reporting (financial statement) schedules.
They can also be used for reviewing purposes and it gives users a presentable / and consistent format to view data in Hyperion.
Data grids are the equivalent of pivot tables in excel. It should be used for ad hoc purposes to view / analyse data in whatever form you choose. The user has the flexibility to choose what they see in the rows, columns and page dimensions.
One of the main differences between data entry forms and data grids is that you can’t export data grids to excel whereas you can with data entry forms. Other differences are:
1. Run consolidation, translation, promotion from data grids but not in data entry forms.
2. You can link other data entry forms to a data entry form
3. Data entry forms offer greater formatting options than in data grids i.e. colours, fonts, bold, italics.
At the end of the day, they are similar and there is no reason why you can’t have (use) both. It all depends on your local needs on how best you use both.
I hope above information helps.

How to give space in ALV grid display

Hi,
I have developed one report using alv grid.
Iam getting details like this.
ABCD |12345|34567|
|35363|74567|
but i want like this
ABCD here i want space
|12345|34567|
|35363|74567|
how to give space?
points guaranteed
cheers
kaki

Hi experts,
Iam trying to get the output like in this report
BALVHD01
for example: ID & No iam getting in the same line.I want to group the numbers for the particular ID.
In my code ID is 'STEXT'
and NO is 'QMNUM'.
this is my code.
REPORT YET_DISPLAYCOST
 MESSAGE-ID ZM
 NO STANDARD PAGE HEADING
 LINE-SIZE 200.
TYPE-POOLS: SLIS.
TABLES: QPCT,
 QPGT,
 QMEL,
 QMMA,
 IHPA,
 JEST,
 HRP1000.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 ITAB_EXTAB TYPE SLIS_T_EXTAB.
DATA :
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
S_FIELDCAT TYPE SLIS_FIELDCAT_ALV ,
G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND' ,
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'T_TOP_OF_PAGE',
I_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER WITH HEADER LINE,
I_EVENTS TYPE SLIS_T_EVENT WITH HEADER LINE,
S_EVENT TYPE SLIS_ALV_EVENT ,
S_LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV.
*to remove sort buttons on the tool bar
DATA : EX TYPE SLIS_T_EXTAB.
DATA : EXWA TYPE SLIS_EXTAB.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
DATA: I_FCALV TYPE SLIS_FIELDCAT_ALV OCCURS 0 WITH HEADER LINE.
DATA:F_TDOBJECT LIKE THEAD-TDOBJECT,
 F_TDNAME LIKE THEAD-TDNAME,
 F_TDID LIKE THEAD-TDID,
 ITAB_LINES LIKE tline OCCURS 0 WITH HEADER LINE.
DATA:BEGIN OF ITAB OCCURS 10,
 QMNUM LIKE QMEL-QMNUM,
 DESC(72),
 END OF ITAB.
DATA: BEGIN OF T_HDR OCCURS 0,
 QMNUM LIKE QMEL-QMNUM,
 PARNR LIKE IHPA-PARNR,
 OBJID LIKE HRP1000-OBJID,
 STEXT LIKE HRP1000-STEXT,
 END OF T_HDR.
DATA: BEGIN OF T_DET OCCURS 10,
 SNO TYPE I,
 QMNUM LIKE QMEL-QMNUM,
 QMTXT LIKE QMEL-QMTXT,
 QMGRP LIKE QMEL-QMGRP,
 QMCOD LIKE QMEL-QMCOD,
 PARNR LIKE IHPA-PARNR,
 OBJNR LIKE QMEL-OBJNR,
 STEXT LIKE HRP1000-STEXT,
 DESC(72),
 COST(20),
 END OF T_DET.
DATA: T_FINAL LIKE T_DET OCCURS 0 WITH HEADER LINE.
DATA: SNO(3).
DATA: CHK2(4).
DATA: V_REPID TYPE SY-REPID.
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:S_QMNUM FOR QMEL-QMNUM,
 S_QMART FOR QMEL-QMART,
 S_QMDAT FOR QMEL-QMDAT.
SELECTION-SCREEN END OF BLOCK A1.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM DISPLAY_ALV.
END-OF-SELECTION.
*& FORM GET_DATA
 TEXT
FORM GET_DATA.
DATA: G_STEXT LIKE T_DET-STEXT.
*TO GET DETAILS
SELECT QMNUM REFNUM QMDAT QMTXT OBJNR QMGRP QMCOD FROM QMEL
 INTO CORRESPONDING FIELDS OF TABLE T_DET
 WHERE QMNUM IN S_QMNUM AND
 QMART IN S_QMART AND
 QMDAT IN S_QMDAT.
LOOP AT T_DET.
 SELECT SINGLE * FROM IHPA WHERE OBJNR = T_DET-OBJNR and
 PARVW = 'AB'.
 IF SY-SUBRC = 0.
 T_DET-PARNR = IHPA-PARNR.
 MODIFY T_DET.
 CLEAR T_DET.
 ENDIF.
ENDLOOP.
LOOP AT T_DET.
 DELETE T_DET WHERE PARNR EQ ''.
 SELECT SINGLE * FROM JEST WHERE OBJNR = T_DET-OBJNR AND
 STAT = 'I0072' AND
 INACT NE 'X'.
 IF SY-SUBRC NE 0.
 DELETE T_DET INDEX SY-TABIX.
 ENDIF.
ENDLOOP.
LOOP AT T_DET.
 SELECT SINGLE * FROM HRP1000 WHERE OBJID = T_DET-PARNR.
 IF SY-SUBRC = 0.
 T_DET-STEXT = HRP1000-STEXT.
 MODIFY T_DET.
 CLEAR T_DET.
 ENDIF.
ENDLOOP.
LOOP AT T_DET.
 CHK2 = T_DET-QMNUM+0(4).
 IF CHK2 NE '0002'.
 DELETE T_DET INDEX SY-TABIX.
 ENDIF.
ENDLOOP.
*--FOR HEADER
LOOP AT T_DET.
 SELECT SINGLE * FROM HRP1000 WHERE OBJID = T_DET-PARNR AND
 STEXT NE ''.
 T_HDR-QMNUM = T_DET-QMNUM.
 T_HDR-STEXT = HRP1000-STEXT.
 APPEND T_HDR.
 CLEAR T_HDR.
ENDLOOP.
LOOP AT T_DET.
 F_TDID = 'LTQM'.
 F_TDNAME = T_DET-QMNUM.
 F_TDOBJECT = 'QMEL'.
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 ID = F_TDID
 LANGUAGE = SY-LANGU
 NAME = F_TDNAME
 OBJECT = F_TDOBJECT
 TABLES
 LINES = ITAB_LINES
 EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 NOT_FOUND = 4
 OBJECT = 5
 REFERENCE_CHECK = 6
 WRONG_ACCESS_TO_ARCHIVE = 7
 OTHERS = 8.
 DESCRIBE TABLE ITAB_LINES LINES SY-TFILL.
 IF SY-TFILL > 0.
 LOOP AT ITAB_LINES.
 ITAB-QMNUM = T_DET-QMNUM.
 ITAB-DESC = ITAB_LINES-TDLINE.
 APPEND ITAB.
 CLEAR ITAB.
 ENDLOOP.
 ENDIF.
ENDLOOP.
SORT T_DET.
LOOP AT T_DET.
 SNO = SNO + 1.
 T_FINAL-SNO = SNO.
 T_FINAL-QMNUM = T_DET-QMNUM.
 T_FINAL-QMTXT = T_DET-QMTXT.
 T_FINAL-COST = T_DET-COST.
 IF G_STEXT NE T_DET-STEXT.
 G_STEXT = T_DET-STEXT.
 T_FINAL-STEXT = T_DET-STEXT.
 ENDIF.
 LOOP AT ITAB WHERE QMNUM = T_DET-QMNUM.
 T_FINAL-DESC = ITAB-DESC.
 APPEND T_FINAL.
 CLEAR T_FINAL.
 IF T_FINAL-SNO = '0'.
 T_FINAL-SNO = ''.
 ENDIF.
 ENDLOOP.
ENDLOOP.
ENDFORM. "GET_DATA
*& FORM DISPLAY_ALV
 TEXT
FORM DISPLAY_ALV.
V_REPID = SY-REPID.
PERFORM FIELD_CATLOG.
PERFORM EVENT.
PERFORM LAYOUT.
PERFORM SORT_T_FINAL.
PERFORM TOP-OF-PAGE.
PERFORM REMOVE_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-CPROG
 IS_LAYOUT = S_LAYOUT
 IT_FIELDCAT = I_FIELDCAT[]
 I_SAVE = 'A'
 IT_SORT = IT_SORT
 IT_EVENTS = I_EVENTS[]
 IT_EXCLUDING = EX
 TABLES
 T_OUTTAB = T_FINAL
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY_ALV
*& Form FIELD_CATLOG
 text
FORM FIELD_CATLOG .
PERFORM FILL_FCAT USING:
 1 1 'STEXT' 'ATTRIBUTED DIV' 18 'T_FINAL' ' '
 1 2 'SNO' 'SR.NO' 18 'T_FINAL' ' '
 1 3 'QMNUM' 'ET.REF.NO' 30 'T_FINAL' ' '
 1 4 'QMTXT' 'DESCRIPTION' 20 'T_FINAL' ' '
 1 4 'DESC' 'DEFECT' 20 'T_FINAL' ' '
 1 5 'COST' 'COST' 15 'T_FINAL' 'S'.
ENDFORM. " FIELD_CATLOG
*& Form FILL_FCAT
 text
 -->LEV text
 -->POS text
 -->FLD text
 -->DES text
 -->LEN text
 -->TABLE text
 -->F text
FORM FILL_FCAT USING LEV POS FLD DES LEN TABLE F.
CLEAR I_FCALV.
I_FCALV-COL_POS = POS.
I_FCALV-FIELDNAME = FLD.
I_FCALV-SELTEXT_L = DES.
I_FCALV-DDICTXT = 'L'.
I_FCALV-OUTPUTLEN = LEN.
I_FCALV-TABNAME = TABLE.
IF F EQ 'S'.
 I_FCALV-DO_SUM = 'X'.
ENDIF.
APPEND I_FCALV TO I_FIELDCAT.
ENDFORM. "FILL_FCAT
*& Form SORT_T_FINAL
 text
FORM SORT_T_FINAL.
DATA: L_SORT LIKE LINE OF IT_SORT.
REFRESH IT_SORT.
CLEAR L_SORT.
L_SORT-SPOS = '1'.
L_SORT-FIELDNAME = 'STEXT'.
L_SORT-TABNAME = 'T_FINAL'.
L_SORT-UP = 'X'.
APPEND L_SORT TO IT_SORT.
CLEAR L_SORT.
L_SORT-SPOS = '6'.
L_SORT-FIELDNAME = 'COST'.
L_SORT-TABNAME = 'T_FINAL'.
L_SORT-UP = 'X'.
L_SORT-SUBTOT = 'X'.
APPEND L_SORT TO IT_SORT.
CLEAR L_SORT.
S_LAYOUT-CELL_MERGE = 'X'.
ENDFORM. "SORT_T_FINAL
*& Form EVENT
 text
FORM EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = I_EVENTS[].
LOOP AT I_EVENTS.
 IF I_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
 I_EVENTS-FORM = 'T_TOP_OF_PAGE'.
 ENDIF.
 IF I_EVENTS-NAME = SLIS_EV_USER_COMMAND.
 I_EVENTS-FORM = 'USER_COMMAND'.
 ENDIF.
 MODIFY I_EVENTS.
ENDLOOP.
ENDFORM. " EVENT
*& Form LAYOUT
 text
FORM LAYOUT .
S_LAYOUT-DETAIL_POPUP = 'X'.
 S_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " LAYOUT
*& Form TOP-OF-PAGE
 text
FORM TOP-OF-PAGE .
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-INFO = 'Error Trouble -by cost'.
APPEND LS_LINE TO I_LIST_TOP_OF_PAGE.
CLEAR LS_LINE.
ENDFORM. " TOP-OF-PAGE
*& Form REMOVE_SORT
 text
FORM REMOVE_SORT.
EXWA-FCODE = '&ODN'.
APPEND EXWA TO EX.
EXWA-FCODE = '&OUP'.
APPEND EXWA TO EX.
ENDFORM. "REMOVE_SORT
*& Form T_TOP_OF_PAGE
 text
FORM T_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = I_LIST_TOP_OF_PAGE[].
ENDFORM. " T_TOP_OF_PAGE

How to give connection between sap R/3 to sap BI 7.0 system

how to give connection between sap R/3 to sap BI 7.0 system

Hello,
Check this links:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
You can look at:
OSS Note 184971 'Notes on BW source system connections' and http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/content.htm
You can use this best practice connectivity guide for connecting BW to any SAP source system . It explains step by step procedure to connect the source systems to BW.
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
check this:
http://wiki.ittoolbox.com//index.php/HOWTO%3ARe%2DConnect%5FR/3%5Fand%5FBW#Type_Transaction_SM59._Maintain_RFC_destinations
Regards,
Jorge Diogo

How to maintain Space between text in Smart form

Hi Experts,
How to maintain space between text in smat form.
For example
I need to maintain like this
Prepared By:                       Passed By:                  Approved By:
    but after save it come like this
Prepared By:   Passed By: Approved By:
How to maintain spaces between texts?
Regards,
Sreedhar.

hi,
we can give space in the smartform in the same way as in the scripts with two commas one space can be given.
when u click on the text in the window ,
there in the general attributes at the left hand side u can find a small icon for editor in that u can define the spaces with the variable to be printed in &var&.

How to give space between date mm and year in terms of bytes

Similar Messages

Maybe you are looking for