How to reduce space between cell border and text ?

I want to make a very small print of my class timetable. But I can't reduce the table size after a certain size. The major portion is taken up due to space between the cell borders and the text in them. Is there anyway I can reduce that space so that I can make the font size a little more and still keep the table size small.

Assuming your are using Pages '09 (4.0.3) ..
First select all the cells which you wish to change.
Go to Inspector - Text Inspector, and reduce the Inset Margin

Similar Messages

  • How to change space between folder icon and text on personal toolbar?

    I have a few folders on the personal toolbar with just a letter to indicate what they are, but on the theme I'm using, the letter is too far away from the folder it belongs to and partially falls under the next folder icon. I don't want to increase the spacing between all icons to show the full letter, as this decreases the amount of icons you can have on the toolbar. Instead I want to decrease the space between the folder and text belonging to it, so it's right next to it instead of 5 pixels away.
    I've found various entries to change padding and margins in userChrome.css, but it's always for around the icon, I don't know where to look to close the space between the icon and its corresponding text.
    Any help would be greatly appreciated, thanks.

    Did you check the value of the margin-left of the text?
    You can set negative margin values if necessary.
    <pre><nowiki>#PlacesToolbarItems .toolbarbutton-text { margin-left: -2px !important; }</nowiki></pre>
    Add .bookmark-item[container] if you only need this for folder items
    <pre><nowiki>#PlacesToolbarItems .bookmark-item[container] .toolbarbutton-text { margin-left: -2px !important; }</nowiki></pre>

  • How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
    Open Find/Replace and click the Object tab.
    Click the Specify attributes to find button to the right of the Find Object Format: field.
    Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
    Click OK
    Click the Specify attributes to change button to the right of the Change Object Format: field.
    Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
    Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
    Click OK
    Click Change All

  • How to reduce space between lines in Thunderbird

    newest TB update changed the look of TB with too much space between lines everywhere; would like to change back so to have more lines visible and not as spaced out in height, so I can see more folders and emails at once

    Interesting....as there hasn't been any changes in what you describe.
    Did you use a theme addon or the default theme?
    Check that no addons are interfering with the view.
    so restart in Thunderbird Safe mode.
    Help > Restart with addons disabled.
    If this improves what you are seeing then one of your addons is causing it.
    Process of elimination, disabling one a ta time to see which one it is. Maybe an addon needs to be updated.
    If you changed your screen resolution then it would effect the size of icons on desktop, all windows you open etc. Less dpi size increases the display items.

  • Cell border and text buttons.

    Dear members:
    I am a beginner and have just started using Dreamweaver.
    After a few attempts and some reading I decided to post a message
    with questions on a couple of problems I haven't been able to find
    answers for.
    The first one relates to table cell formating. I have tried
    to set border properties for individual table cells but haven't
    been able to. I would like to be able to set individual border
    thickness and border color values for different cells in a table.
    How is this done ? I have selected the cells I wish to format but
    the property window shows color but not border thickness value. Any
    ideas ?
    The second issue relates to text rollover buttons. I wish to
    create simple navigational buttons in a web site created from text
    placed in table cells. The text should be created as one color
    (gray) for the "up" state and then change to a different color as
    the state changes to "over" and "down". I have looked at Flash
    buttons but they are not exactly what I want and don't offer the
    option I am looking for. Flash text also doesn't allow me to set
    behaviors as most behaviors appear grayed and non-selectable. How
    can I create rollover buttons from simple text that changes color
    and style (normal, bold, italic) with state changes ?
    Any help will be very appreciated. I apologize if these
    questions seem basic but I am beginning to work with Dreamweaver.
    Thank you in advance,
    Joseph Chamberlain

    These may help -
    http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
    http://www.macromedia.com/devnet/mx/dreamweaver/css.html
    http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
    http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "FreakyJesus" <[email protected]> wrote in
    message
    news:ec1dq8$gjo$[email protected]..
    > The answer to your table cell borders question is CSS.
    Do you know much
    > about
    > that? It will allow you to define all the cell styles
    you want, and then
    > you
    > apply those styles to the cells in question.
    > Your text question can be done a few ways, but again CSS
    is the answer. If
    > you
    > don't know anything at all about it - go look - you'll
    be using it again
    > and
    > again so it's well worth your time.
    > If you know about css and need help with the specifics,
    then post back and
    > we
    > can try some stuff out.
    >
    > Andy
    >

  • How To Reduce Space Between Text and Image

    I am trying to wrap text around an irregular shape in InDesign CS4. I used the pen tool to mark the outline of the image, cut the image, then selected the pen outline and pasted the image into the outline. With the TextWrap settings set to what is in this dialog box, text wrapping appears fine on the right-hand side, but has too much space on the left-hand side.
    If I try to reduce the space even further, it just affects the right-hand side of the image, not the left:
    It is doing the same thing for all of my irregularly-shaped images where I try to wrap text. How can I reduce the whitespace to the left of the image?

    Actually just noticed your text is already justified apologies.
    Couple more things you can try to improve this:
    From Control panel menu choose Justification and try using the following settings:
    Minimum
    Desired
    Maximum
    Word Spacing
    80%
    100%
    120%
    Letter Spacing
    -2%
    0%
    2%
    Glyph Scaling
    98%
    100%
    102%
    Also check that Single Word Justification is set to Full Justify.
    Cari

  • How to reduce space between paragraphs in bullet list

    I am making a bullet list and I got it to work using CSS up to a point. The problem is that I need to put paragraph breaks between the bullet items and those paragraph breaks are huge, so my list is all spread out vertically. How do I make a break that is smaller, like a fraction of a line, but still keeps the bullet point set up?
    Here is the URL http://www.williambellomy.com/Amenities.html
    Thanks

    That's your table structure for the list at the bottom, which will explain the different spacing. The first list is all in one cell.
    I see you've got list items in separate cells on other pages too - it's not the most reliable way to do it. Keep your list together and use the margin attribute in your style sheets.

  • How to give space between date mm and year in terms of bytes

    Hi Guru,
    In sapscript I want to give space in datae formate betweeen day and month , month and  year in terms of bytes.
    Example :
    if datae is 2009/08/18 then I want to move like   2009     08       18. Here the gap between the date field and month , year fields is in terms of bytes. Like 4 bytes gap between year and date, 5bbytes gap between day and month  in ECC6.0.
    Please help in this.
    Thanks,
    PJ.

    hii prakash,
                                  Use the Function Module.
    RP_FORMATING_DATE
    If you use this FM then automatically it will convert it to YYY MM DD format and then you can use as per your requirement 
    or you can do like this
    Use following code to change the date format from DD.MM.YYYY to YYYY MM DD
    DATA : DATE(10) TYPE C,
    DATE1(10) TYPE C.
    CONCATENATE DATE6(4) DATE3(2) DATE+0(2)
    INTO DATE1
    SEPARATED BY ' '.
    regards,
    Shweta
    Edited by: Shweta Joon on Aug 18, 2009 10:38 AM

  • How to manage the space between a table and its title?

    Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
    1. Titles were separated by a return that is not  visible...  (any code is revealed by ID)
    2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
    3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
    but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
    Grep cannot see the end of paragraph in the tables's title.
    It another method?
    Basically, how to modify the space between a table and ists title

    I think you and Bob are not in synch here.
    Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
    I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
    But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

  • How to get space between two values in a single cell of a table.

    hello,
            how to get space between two values in a single cell of a table.
    thanks a lot.
    kailash.

    sorry i got the answer.

  • How to maintain space between table and header in ssrs

    Hi Everyone, 
      I have created a report. In page header of this report, On First Page space between header and
    body is good , but from next page, space is not maintain. 
    Please suggest me how to maintain space at every page of report.
    Thanks. 

    Can you post a screenshot?
    This can be achieved if you are repeating column headers on each page. Just change row height of header and align text to bottom, and make sure there is no space between Page Header and Tablix.
    - Vishal
    SqlAndMe.com

  • How do I alter the space between the Bullet and the start of a sentence?

    Hello, I have recently upgraded to Pages 5.0.1, I would like to adjust the space between the bullet and the start of the sentence without having to use space as I need to save this action as part of the template that I am working on. I know the tabs at the top adjust indent but they move the bullet too, I need to change the space between the two. Thanks in advance for the help!

    Please ignore this question, I found it, just wasn't used to the new layout of the inspector. For anyone else who is looking, the inspector is the pannel on the left, at the top click style, then at the bottom you will see bullets, click the arrow next to bullets to expand the options then adjust the "text" indent, note there are two indent options "Bullet" and "Text", "text" effects the space between the bullet and word and "bullet" effects the space between the margin and bullet.
    Now I just need to work out how to update the default font styles in new pages and I'm back to where I was six months ago.

  • How to introduce Space between currencyCode and number using convertNumber in adf

    Hi,
    We are trying to use the af:convertNumber tag inside the af:outputText to apply the currency code in front of the number.
    We would like to introduce a space between currency code and number by using the currency converter.
    Sample code snippet is as below.
    Eg.
    <af:outputText value="#{pageFlowScope.myManagedBean.annualSalary}" id="aot8">
        <af:convertNumber type="currency" currencyCode="USD"/>
    </af:outputText>
    Output shown from the above code is as: USD11,234.00
    but we want to display as : USD 11,234.00(space after USD)
    Please suggest us as what we can use to achieve the above requirements.
    we are using jdev version 11.1.1.5.0 on windows 7 OS.
    Thanks,
    Shivaji

    Timo,
    if we use value="USD #{pageFlowScope.myManagedBean.annualSalary}", other default formats for the number will not work, it will treat as a string, even if we pass the number/bigdecimal type to the outputtext.
    And if we write two separate output texts that will be bad way, to achieve this, as we have many fields to apply the same in our application.
    Looking for better options on this.
    Thanks,

  • No space between phonetic name and department

    Has anyone experienced a problem on iPhone running iOS7 when using contacts. I recently added information to one of my contacts: department, phonetic name, company, etc. When I was done, I pushed "Done" and it showed me info without space between phonetic name and department. Words were written together. How can I contact apple to tell them to fix that issue?

    Hi there
    I may be wrong in my understanding with this. My own understanding is that when you have expanding text, the space between the expanded text and the next text was removed. For example:
    Here is a sentence with expanding text to click on.
    And if the user clicked the expanding text, the expansion occurred, but removed the space between the expanded text and the next word. So it looked like this:
    Here is a sentence with expanding textexpanded text contentto click on.
    So my understanding was that the update would correct things so that they looked like this:
    Here is a sentence with expanding textexpanded text content to click on. (Note the space between "content" and "to".)
    What you seem to be describing is that the text looks like this when you expand it:
    Here is a sentence with expanding textexpanded text content to click on.
    But you would prefer it look like this instead:
    Here is a sentence with expanding text expanded text content to click on. (Note the added space between "text" and "expanded".)
    My thought is that you can work past this by simply inserting a space character to precede the expanded text.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Reduce space between columns

    hi all...
    i want to reduce space between columns in sqlplus....
    how can i?

    sachinpawan wrote:
    hi all...
    i want to reduce space between columns in sqlplus....
    how can i?Which space? Where it is coming, in some output? Whats the db version?
    Aman....

Maybe you are looking for