How to grant wire access to a wireless ssid

I have a wireless lan controller (5508) broadcasting 2 SSID's, once is a secure vlan grabbing an ip address from a local dhcp server and getting access to the internal network, and the other ssid is for a guest vlan where the dhcp server is in a remote site and internet access is off a circuit in our data center which is accessed over a wan. The secure ssid's vlan is defined on the local switch, but the guest vlan is not defined on the local switch.
the ap's in the respective sites are trunked to the core switch and the switchport config is :
switchport trunk encapsulation dot1q
switchport trunk native vlan 5
switchport trunk allowed vlan 5
switchport mode trunk
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
queue-set 2
priority-queue out
mls qos trust cos
auto qos voip trust
spanning-tree portfast
it's trunked b/c we have both vlans going across this physical connection.
I would like get the guest vlan a wired connection, ie. off a switch\hub, but not sure how to do that as this guest vlan is not defined on our local network.

You may be trunking, but you're only allowing vlan 5 across the trunk.
On your controller, how are you interfaces configured?
Your SSIDs should match up with an interface, which matches a L2 vlan, which eventually matches a L3 IP address.
Can you provide a little more detail? I've done this setup in the past, so it's doable.

Similar Messages

How to grant anonymous access on sharepoint document library/list only not for web application

Hello
How to grant anonymous access on sharepoint document library/list only not for web application.I have claim based sharepoint site and has to be but i want to grant access on document library/list only.Is this possible?
Thanks
Rajesh Kumar "Changing the Face" can change nothing.But "Facing the Change" can change everything.

As i am using following code
SPSite site = SPContext.Current.Site;
SPWeb web = SPContext.Current.Web;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite ospSite = new SPSite(site.ID))
using (SPWeb webs = ospSite.OpenWeb(web.ID))
// Enable anonymous access on web application
webs.AllowUnsafeUpdates = true;
SPUrlZone urlZone = SPUrlZone.Default;
SPWebApplication specifiedWebApplication = ospSite.WebApplication;
SPIisSettings iisSettings = specifiedWebApplication.IisSettings[urlZone];
//iisSettings.AuthenticationMode = AuthenticationMode.Windows;
iisSettings.AllowAnonymous = true;
specifiedWebApplication.Update();
// Get document library collection here and fetch all the document urls
SPDocumentLibrary docLib = (SPDocumentLibrary)web.Lists["Documents"];
if (docLib != null)
docLib.BreakRoleInheritance(true, false);
docLib.AllowEveryoneViewItems = true;
docLib.AnonymousPermMask64 = SPBasePermissions.ViewPages | SPBasePermissions.OpenItems | SPBasePermissions.ViewVersions
| SPBasePermissions.Open | SPBasePermissions.UseClientIntegration | SPBasePermissions.ViewFormPages | SPBasePermissions.ViewListItems;
//docLib.AnonymousPermMask64 = SPBasePermissions.EmptyMask;
docLib.Update();
Should working but getting access denied......i am totally stuck at this point.
Rajesh Kumar "Changing the Face" can change nothing.But "Facing the Change" can change everything.

How to grant the access t-code : BP by company code or by country

Dear Sir,
Please kindly advise how to add the authorized to grant to access the data in T-code : BP by company code or account group??
Thank you and best regards,
Vimol

Hi Vimol,
Please check the transaction code: SU22.
Give transaction code as "BP".
and execute.
It will list all the authorizations objects of transaction code: "BP"..
Depending on ur requirement, u can choose the object.
I hope it helps u.
Regards,
Sri.

How to grant admin access to a CDOT cluster via an Active Directory group

We have a new 4 node CDOT cluster that we are building out at this time. This is the first on our company as the rest are all running 7-mode.When I add execute the following commands on our new CDOT cluster, I am able to successfully login via putty or system manager:security login create -vserver vs1 -username DOMAIN\username -application ontapi -authmethod domain -role admin
security login create -vserver vs1 -username DOMAIN\username -application ssh -authmethod domain -role adminHowever, I need to provision security access via AD groups as we have a ot of admins that need access. If I use the following commands to provision security, the commands are accepted by ONTAP but AD credential sets will not grant access to putty or system manager.security login create -vserver vs1 -username "DOMAIN\AD Group" -application ontapi -authmethod domain -role admin
security login create -vserver vs1 -username "DOMAIN\AD Group" -application ssh -authmethod domain -role adminPlease provide comments if you have ideas on next steps.

I have done it in 8.3 please see below for the steps Here are the steps to grant access after you have CIFS setup in your SVM (This portion has to be done before the below steps will allow access) my-fas8060> security login domain-tunnel create -vserver (nameofSVM) (gives SSH login)my-fas8060> security login create -vserver (nameofSVM) -username domain\group name -application ssh -authmethod domain -role admin (gives GUI login)my-fas8060> security login create -vserver (nameofSVM) -username domain\group name -application http -authmethod domain -role admin my-fas8060> security login create -vserver (nameofSVM) -username domain\group name -application ontapi -authmethod domain -role admin

How can I grant Application access to a user via API ) programattically

how do I grant access to a portal user from API
I want to grant access to a user from an API, ie I need a
command to grant "SCOTT" access to "EXAMPLE_APP" APPLICATION as
an end user?

Hi,
I am assuming that you have already updated the EUL in the Administrator Edition, correct? If not, open Discoverer Administrator and login to the database you want to connect to. You must use your EUL user name which I assume has already been created and assigned the correct privileges in the database. You will be asked to update your EUL. Follow the prompts.
Once logged into the EUL, go to Tools \ Privileges and find the user that you want to give administrator access to.
Hopefully, this answers your question.
Regards,
Nancy

How do you know if someone else is attempting access to your wireless network? (WRT54G)

I searched adn tried the Linksys FAQ to no avail to get an answer to the subject question.
Is there any way to verify who is actually using or trying to attempt use of your wireless network, if so, where do I locate and view this information?
I just set up a wireless system so my wife could get access from her wireless equipped laptop, but I really see no area to verify who is actually using the wireless network or if some other outside source/person is attempting to get access.
Any info on where, how and what to do to view this type of info would be greatly appreciated and if it can't be, shouldn't there be something added to the system that would allow one to view all users accessing their wireless system?
Thank you,
Clay Fugitte

Tracking down who is using your wireless system is usually difficult or impossible. The router only knows the MAC address of the connecting computer. MAC addresses can be faked. Even if you knew the MAC address of the person connecting, what can you do with that info? Go around the neighborhood asking people "Is this your MAC address?"
Instead of worrying about who is connecting to your wireless, you should simply set up wireless security. This will keep intruders off your wireless network. Then you don't need to worry about who is connecting.
It sounds like you are running an unsecured wireless router. When you run an unsecured wireless router, anyone within range can login and use your Internet connection. At a minumum, this means that they will be using your bandwidth. At worst, they could be uploading copyrighted music, sending spam email, distributing viruses, or downloading child pornography --- all from an account with your name on it! So my advice is --- secure your wireless network.
To set up wireless security, do the following:
First of all, to setup wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

How toplink grant permission for direct field access

I know already know that if I need to direct access private or protected field of an instance I must grant supressAccessChecks to ReflectPermission class using policytool or edit java.policy file directly ...
but how Toplink grant this permission to ReflectPermission class since my java.policy file remain the original.
Kowit Laison

In my own experiences, the first release of JDK 1.2 had problems with reflection accessing private attributes. As you mentioned, you had to have a policy file that allowed TopLink access to reflectively access private attributes.
Since subsequent releases (1.2.x, 1.3, 1.4, etc), it always has "just worked". I.e., it seems to be default behavior of JVM's that you can acess private attributes through reflection. Sometimes some app servers come with startup scripts that have policies that change this default behavior and you have to override it, but in general, a vanilla JVM simply will allow private attribute access through reflection.
- Don

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

How do I grant applets access to local resources?

Hi:
I know that for a remotely loaded applet to access local resources the applet must be signed. But, creating a jarfile and signing it for every step in the development is tideous. Is it possible for a locally loaded applet to access local resources without signing the applet?
Secondly, I found some resources mention that signing is not enough. Is this true? if so, how do I request access to a particular resource?
Thanks, Erik

Things work on the command line but fail as applet. I need to figure out why.
One problem seems that calling applet methods from a java script run on the onload event fail because the applet is not yet initialized. But moving the function to a user initiated event did not solve the problem.
I need to get access to a smart card reader and load the card, I do really simple stuff: check if the card is inserted and get the length of the ATR code.
So, there is some missing link and I suspect it may be managing the security parameters. I know about signing but nothing else. What do I need to do to grant my applet access to local resources?
Thanks, Erik

How do I restrict access to Wireless router (800 series) by mac address

I hope I'm in the correct area.
I'm trying to deny access to 3 wireless devices to the cisco 800 series wireless router
The MAC address are:
MAC Address    IP address      Device        Name            Parent         State
0014.6caf.410a 192.168.2.26    unknown       -               self           Assoc
9803.d8ba.cd42 192.168.2.41    unknown       -               self           Assoc
a4d1.d205.72e1 192.168.2.25    unknown
If this cannot be done is it poosible to assign the mac address to an ip address and then denying access to the ip address.
Thanks
Jon

Hello Jon,
You should be able to do it either way. Best way would be by IP address so you do not even allow the host to associate with your AP.
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

HT1178 How do I restrict access to my network to mac addresses?

I am setting-up a new Time Capsule and wish to restrict access to my wireless network to only those mac addresses of my equipment. I can't find instructions on how to do this. Any help in pointing me to the correct resource would be appreciated.

Suggest that you check the Help area in AirPort Utility for instructions.
Open AirPort Utility
Click the Help menu at the top of the screen
Click AirPort Utility Help
Wait for Help to load
Click Setting up a Wi-FI network on the left side of the main page
Click Control when a user can access your network
Click Control access to your wireless network

I-Cal: I need to grant administrative access to my assistant...

I need to grant administrative access to my assistant so that she can make scheduling edits to my i-Cal. I still need to have full administrative access to the calendar as well. How does one grant dual access?

Try booting into safe mode.
http://support.apple.com/kb/HT1564

How I can wire an extern WebService to BPEL?

I have started to work with BPEL PM (2.0.10) bbpelz 0.0.95. Now I would
understand how I can wire an extern WebService (like a PLSQL WebService
created in JDeveloper from a package) to BPEL.
Therefore I look for Examples from BPEL - AmazonFlow or GoogleFlow. Then I set the ProxySettings in the orabpel\bin\obsetenv.bat. I've got the error:
BPEL validation failed.
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error]: CompilationError
[bpelc] [Description]: in line 0 of "bpel.xml", Failed to read wsdl.
[bpelc] Error happened when reading wsdl at "C:\Programme\oracle_sw\orabpel\samples\demos\GoogleFlow\GoogleSearchRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: No route to host: connect".
[bpelc] Make sure wsdl exists at that URL and is valid.
[bpelc] .
[bpelc] [Potential fix]: .
[bpelc] .
BUILD FAILED: C:\Programme\oracle_sw\orabpel\samples\demos\GoogleFlow\build.xml:29: Validation error
On my Laptop - there is'nt a Proxy, and the versions are: bpel pm 2.1.1
bpelz 0.9.10
I've got the error, when built the AmazonFlow:
[bpelc] [Error] AmazonWebServices.wsdl:9:45: src-resolve.4.2: Error resolvin
g component 'soapenc:Array'. It was detected that 'soapenc:Array' is in namespac
e 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespac
e are not referenceable from schema document 'http://soap.amazon.com/schemas3/Am
azonWebServices.wsdl'. If this is the incorrect namespace, perhaps the prefix of
'soapenc:Array' needs to be changed. If this is the correct namespace, then an
appropriate 'import' tag should be added to 'http://soap.amazon.com/schemas3/Ama
zonWebServices.wsdl'.
Who can help me, make run the samples AmazonFlow and GoogleFlow?
Where can I find more informtions about the Problem, how I can wire a WebService created in JDeveloper to BPEL? I can deploy the WebService from JDeveloper on the BPEL-OC4J-Server- but what have I to do or to integrate in order to see my WS in BPEL console and have access to it in bpel designer?
Regards Sabine

Hi,
I followed your suggestion and linked my BPEL service to a WebService through the WSDL that is remotely accessible as in "{color:#0000ff}http://localhost:8988/scratch/kibailey/view_storage/kibailey_SOA/.jdev_user_home/mywork/OptyEventsService/Model/classes/EventsAMService?wsdl{color}" instead of directly accessing the WSDL file. This Webservice is of course deployed at the above mentioned server and location and the server is up.
But when I run my BPEL process, I still get this message "{color:#ff0000}Reference EventsAMService does not exist as wire target{color}". I have cross checked other WSDL dependencies and they are fine.
I am currently using JDev 11g drop 6 through ADE (linux). I have exposed a BC4J component (Application Module) as a WebService.
Please let me know of any resolution.
With regards,
Kishan

Grant the access rights to manager run the work flow history report without edit /delete rights

I found that only Team Member / Workspace creator / Administrator can run
the work flow history report. However, we have a Purchase Order request
which need ask the supervisor for 1st approval and manager for 2nd approval.
But those managers want to see who prepare the P.O. and supervisor done the
first approval before their 2nd approval. How can I can grant the access
right to the manager to run the work flow history report for this purpose? I
tried grant the role "team member" to those manager, however, it will also
allow them to modify or delete the entry as they are the team member, but we
only want allow those managers can approve the entry and view the work flow
history without other acces such as add/delete/edit to prevent the human
mistake.
Pls advise how can I do this? Thanks!
Regards

Create a new role in teaming can fulfill this requirement. Thanks!
"Joey" wrote in message news:_Cvqo.66903$[email protected]. .
I found that only Team Member / Workspace creator / Administrator can run
the work flow history report. However, we have a Purchase Order request
which need ask the supervisor for 1st approval and manager for 2nd approval.
But those managers want to see who prepare the P.O. and supervisor done the
first approval before their 2nd approval. How can I can grant the access
right to the manager to run the work flow history report for this purpose? I
tried grant the role "team member" to those manager, however, it will also
allow them to modify or delete the entry as they are the team member, but we
only want allow those managers can approve the entry and view the work flow
history without other acces such as add/delete/edit to prevent the human
mistake.
Pls advise how can I do this? Thanks!
Regards

How do I remove access charge on suspended line?

I have two suspended lines on our More Everything Plan. How do I remove access charge on both these lines?@

tanishas_vzw - I think you mean that the lines need to be suspended "without billing, i.e., from the FAQ in the link:
Suspended with billing You'll be billed for all services and features during the suspension period. However, your contract and upgrade eligibility dates won't be impacted. If you subscribe to Equipment Protection, coverage continues throughout the suspension period. This includes Asurion Wireless Phone Protection (WPP), Total Equipment Coverage (TEC), Total Mobile Protection (TMP), and Extended Warranty (EW).
Suspended without billing You won't incur voice, data or feature charges while your service is suspended*. Monthly Verizon Edge payments will continue under your Verizon Edge contract. If you choose this option, your contract and upgrade eligibility dates will be extended for however long your line is suspended. If you subscribe to Equipment Protection, coverage continues throughout the suspension period. This includes Asurion Wireless Phone Protection (WPP), Total Equipment Coverage (TEC), Total Mobile Protection (TMP), and Extended Warranty (EW).

How to grant wire access to a wireless ssid

Similar Messages

Maybe you are looking for