How to handile errors in batch input(session)method

Hi Friends..
How to Re upload the error records in batch input(session)method in BDC Programming?
Regards
D Babu

Hi
U can do it manually by SM35: the wrong trxs can be run again.
If you want to do automatically I don't think you can do it easyly, because to know if a record was loaded successfully depends on how you have loaded it and your data source .
For example:
if the records have to be loaded are from a file and every record is a trx, you could re-read the file and match it with session log:
Log--Result--
Record file
Trx 1           OK                     1
Trx 2           OK                     2
Trx 3           KO                     3 (Re-load it)
Trx 4           OK                     4
Trx 5           KO                     5 (Re-load it)
Trx 6           OK                     6
How to read session log see trx sm35
Max

Similar Messages

BDC Batch input session method

Hi ,
 I am new to SAP progamming. Pls let me know the basics of BDC Batch Input session method and Call transaction method. I want to know the pros and cons of both methods with justification. Please help me in this regarding.

Hi,
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Session method:
1. Data migration is done in two steps .. Generate session and Process session.
So resouces can be used efficiently. good for bulkdata migration.
2. Session method generates error log when u process a session.
3. No SY-SUBRC can be returned after each transaction is called.
4. Provides synchronous Updation only...
Call transaction method:
1. Data migration is done in single steps ..bcoz Transactions are called immediately after filling BDCDATA table. So good for small amount of data.
2. We have to collect error messages using BDCMSGCOLL Table
3. Returns SY-SUBRC and Messages ..after each Call Transaction..very useful feature for further processing based on the Status and Messages..
4. Supports Asynch or Synch Updation.
Example code for session method
Here is the porgram for Purchase order
REPORT zmm0069 NO STANDARD PAGE HEADING
 MESSAGE-ID z0
 LINE-SIZE 132
 LINE-COUNT 65(2).
 Internal Tables *
*Internal table for the purchasing info records fields.
DATA: BEGIN OF i_inforecord OCCURS 0,
 matnr(18),
 lifnr(10),
 uom(3),
 ekgrp(3),
 planned_time(3),
 under_tol(3),
 over_tol(3),
 qty(10),
 price_cat(5),
 inco(3),
 designation(28),
 netpr(13),
 scale_qty1(10),
 scale_pr1(13),
 scale_qty2(10),
 scale_pr2(13),
 scale_qty3(13),
 scale_pr3(10),
 scale_qty4(13),
 scale_pr4(10),
 scale_qty5(13),
 scale_pr5(10),
 scale_qty6(13),
 scale_pr6(10),
 scale_qty7(13),
 scale_pr7(10),
 scale_qty8(13),
 scale_pr8(10),
 scale_qty9(13),
 scale_pr9(10),
 scale_qty10(13),
 scale_pr10(10),
 END OF i_inforecord.
Internal table for Old and New Vendor number
DATA : BEGIN OF i_lfb1 OCCURS 1,
 lifnr(10),
 altkn(10),
 END OF i_lfb1.
Declare internal table for Call Transaction and BDC Session
DATA: i_bdc_table LIKE bdcdata OCCURS 0 WITH HEADER LINE.
 Global Variables *
DATA: g_counter(2) TYPE n,
 g_field_name(18) TYPE c,
 zc_yes TYPE syftype VALUE 'X'.
 Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETERS: p_fname1 TYPE localfile .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETERS: p_rloc1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-003.
PARAMETERS p_group(12) OBLIGATORY DEFAULT 'ZPURCHINFO'.
SELECTION-SCREEN END OF BLOCK c.
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN END OF BLOCK a.
**WRITE the report header
TOP-OF-PAGE.
 INCLUDE zheading.
 Start of selection *
START-OF-SELECTION.
Load Input file
 PERFORM f_load_input_file.
Create BDC records.
 PERFORM create_bdc_records .
*& Form Create_BDC_records
 Perform the BDC for the records in the internal table
FORM create_bdc_records .
 IF NOT i_inforecord[] IS INITIAL.
Open BDC session
 PERFORM open_bdc_session.
 SELECT lifnr altkn FROM lfb1 INTO TABLE i_lfb1
 FOR ALL ENTRIES IN i_inforecord
 WHERE altkn = i_inforecord-lifnr.
Sorting the Internal table for better performance
 SORT i_lfb1 BY altkn.
 LOOP AT i_inforecord.
***Mapping Old Vendor number to the new Vendor number
 READ TABLE i_lfb1 WITH KEY altkn = i_inforecord-lifnr BINARY
 SEARCH.
 IF sy-subrc EQ 0.
 i_inforecord-lifnr = i_lfb1-lifnr.
 ENDIF.
 CLEAR i_bdc_table[].
 PERFORM insert_screen_header.
 call transaction 'ME11' using i_bdc_table
 mode 'A'.
 CLEAR i_bdc_table.
 ENDLOOP.
 CLEAR i_inforecord[].
 PERFORM close_bdc_session.
Release the BDC sessions created
 PERFORM release_bdc.
 ENDIF.
ENDFORM. " open_group
*& Form bdc_dynpro_start
 Start the screen for the transfer of fields
FORM bdc_dynpro_start USING p_g_program_1
 p_g_screen.
 CLEAR i_bdc_table.
 i_bdc_table-program = p_g_program_1.
 i_bdc_table-dynpro = p_g_screen.
 i_bdc_table-dynbegin = 'X'.
 APPEND i_bdc_table.
ENDFORM. " bdc_dynpro_start_start
*& Form bdc_insert_field
 Insert field *
FORM bdc_insert_field USING f_name f_value.
 IF f_value <> space.
 CLEAR i_bdc_table.
 i_bdc_table-fnam = f_name.
 i_bdc_table-fval = f_value.
 APPEND i_bdc_table.
 ENDIF.
ENDFORM. "bdc_insert_field
*& Form open_bdc_session
 Open a BDC session
FORM open_bdc_session .
Open BDC session and create and update records
 CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 client = sy-mandt
 DEST = FILLER8
 group = p_group
 HOLDDATE = FILLER8
 keep = 'X'
 user = sy-uname
 RECORD = FILLER1
 PROG = SY-CPROG
 IMPORTING
 QID =
 EXCEPTIONS
 client_invalid = 1
 destination_invalid = 2
 group_invalid = 3
 group_is_locked = 4
 holddate_invalid = 5
 internal_error = 6
 queue_error = 7
 running = 8
 system_lock_error = 9
 user_invalid = 10
 OTHERS = 11
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDFORM. " create_bdc_session
*& Form insert_screen_header
 Screen flow for the transfer of fields
FORM insert_screen_header .
First Screen 100
 PERFORM bdc_dynpro_start USING 'SAPMM06I' '0100'.
 PERFORM bdc_insert_field USING:'BDC_CURSOR' 'EINA-LIFNR',
 'BDC_OKCODE' '/00',
 'EINA-LIFNR' i_inforecord-lifnr,
 'EINA-MATNR' i_inforecord-matnr,
 'EINE-EKORG' '1000',
 'RM06I-NORMB' zc_yes.
Next Screen 101
 PERFORM bdc_dynpro_start USING 'SAPMM06I' '0101'.
 PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'EINA-MAHN1',
 'BDC_OKCODE' '/00',
 'EINA-MEINS' i_inforecord-uom.
*Next Screen 102
 PERFORM bdc_dynpro_start USING 'SAPMM06I' '0102'.
 PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'EINE-INCO2',
 'EINE-APLFZ' i_inforecord-planned_time,
 'EINE-EKGRP' i_inforecord-ekgrp,
 'EINE-NORBM' i_inforecord-qty.
 PERFORM bdc_insert USING 'EINE-UEBTK' ' '.
 PERFORM bdc_insert_field USING:'EINE-PEINH' i_inforecord-scale_qty1,
 'EINE-BPRME' i_inforecord-uom,
 'EINE-UNTTO' '5',
 'EINE-UEBTO' '25',
 'EINE-MEPRF' i_inforecord-price_cat,
 'EINE-NETPR' i_inforecord-netpr,
 'EINE-INCO1' i_inforecord-inco,
 'EINE-INCO2' i_inforecord-designation.
Checking for Scale quantities
 IF i_inforecord-scale_qty2 = space.
 PERFORM bdc_insert_field USING 'BDC_OKCODE' '=BU'.
 PERFORM insert_bdc_new.
 ELSE.
 PERFORM bdc_insert_field USING 'BDC_OKCODE' '=KO'.
Next Screen 201
 PERFORM bdc_dynpro_start USING 'SAPMV13A' '0201'.
 PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'RV13A-DATAB',
 'BDC_OKCODE' '=PSTF'.
Next Screen 201
 PERFORM bdc_dynpro_start USING 'SAPMV13A' '0201'.
 PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'KONP-KSCHL(01)',
 'BDC_OKCODE' '=PSTF',
 'RV130-SELKZ(01)' zc_yes.
LAST SCREEN 303
 PERFORM bdc_dynpro_start USING 'SAPMV13A' '0303'.
 PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'KONM-KBETR(03)',
 'BDC_OKCODE' '=SICH'.
Counter to Loop the Item level entry
 g_counter = 0.
 PERFORM scale_entry USING i_inforecord-scale_qty2
 i_inforecord-scale_pr2.
 PERFORM scale_entry USING i_inforecord-scale_qty3
 i_inforecord-scale_pr3.
 PERFORM scale_entry USING i_inforecord-scale_qty4
 i_inforecord-scale_pr4.
 PERFORM scale_entry USING i_inforecord-scale_qty5
 i_inforecord-scale_pr5.
 PERFORM scale_entry USING i_inforecord-scale_qty6
 i_inforecord-scale_pr6.
 PERFORM scale_entry USING i_inforecord-scale_qty7
 i_inforecord-scale_pr7.
 PERFORM scale_entry USING i_inforecord-scale_qty8
 i_inforecord-scale_pr8.
 PERFORM scale_entry USING i_inforecord-scale_qty9
 i_inforecord-scale_pr9.
 PERFORM scale_entry USING i_inforecord-scale_qty10
 i_inforecord-scale_pr10.
 PERFORM insert_bdc_new.
 ENDIF.
ENDFORM. " insert_screen_header
*& Form insert_bdc
 Insert BDC
FORM insert_bdc_new .
 CALL FUNCTION 'BDC_INSERT'
 EXPORTING
 tcode = 'ME11'
 POST_LOCAL = NOVBLOCAL
 PRINTING = NOPRINT
 SIMUBATCH = ' '
 CTUPARAMS = ' '
 TABLES
 dynprotab = i_bdc_table
 EXCEPTIONS
 internal_error = 1
 not_open = 2
 queue_error = 3
 tcode_invalid = 4
 printing_invalid = 5
 posting_invalid = 6
 OTHERS = 7
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CLEAR i_bdc_table[].
ENDFORM. " insert_bdc
*& Form close_bdc_session
 Close the BDC session
FORM close_bdc_session .
 CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 not_open = 1
 queue_error = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDFORM. " close_bdc_session
*& Form f_load_input_file
 Upload the file
FORM f_load_input_file.
Check always Local file for upload
 IF p_rloc1 = zc_yes.
 CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = p_fname1
 filetype = 'DAT'
 TABLES
 data_tab = i_inforecord
 EXCEPTIONS
 conversion_error = 1
 file_open_error = 2
 file_read_error = 3
 invalid_type = 4
 no_batch = 5
 unknown_error = 6
 invalid_table_width = 7
 gui_refuse_filetransfer = 8
 customer_error = 9
 OTHERS = 10.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 STOP.
 ENDIF.
 ENDIF.
ENDFORM. " f_load_input_file
*& Form release_bdc
 Release the session
FORM release_bdc.
 SUBMIT rsbdcsub WITH mappe EQ p_group
 WITH von EQ sy-datum
 WITH bis EQ sy-datum
 WITH fehler EQ '.'
 EXPORTING LIST TO MEMORY
 AND RETURN.
ENDFORM. " release_bdc
*& Form scale_entry
 Populate the Scale quantities
 -->P_SCALE_QTY
 -->P_SCALE_PRICE
FORM scale_entry USING p_scale_qty
 p_scale_price.
Increment the Counter
 g_counter = g_counter + 1.
 IF p_scale_qty <> space.
 CONCATENATE 'KONM-KSTBM(' g_counter ')' INTO g_field_name.
 PERFORM bdc_insert_field USING g_field_name p_scale_qty.
 CONCATENATE 'KONM-KBETR(' g_counter ')' INTO g_field_name.
 PERFORM bdc_insert_field USING g_field_name p_scale_price.
 ENDIF.
ENDFORM.
*& Form bdc_insert
 To uncheck the Unlimited (UEBTK)
FORM bdc_insert USING f_name f_value.
 CLEAR i_bdc_table.
 i_bdc_table-fnam = f_name.
 i_bdc_table-fval = f_value.
 APPEND i_bdc_table.
ENDFORM. " bdc_insert
Reward points if it is usefull ....
Cheers,
Chandra Sekhar.

How to check whether a batch input session is completed in ABAP program

I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
How can I check whether a batch input session is completed in the program?
The code that corresponding to the triggering of batch input session:
SUBMIT (SUBREPORT)
   USER MTAB-USERID
   VIA JOB MTAB-GROUPID
   NUMBER JNUMB
   WITH QUEUE_ID EQ MTAB-QID
   WITH MAPPE     EQ MTAB-GROUPID
   WITH MODUS     EQ 'N'
   WITH LOGALL    EQ LMODUS
Or is there any method to wait here until the process is completed before further processing?

Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
   we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
   job which will get triggered
   on event SAP_END_OF_JOB
   ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
   will do the FURTHER actions !
regards,
amit m.

RFUMSV50- Error during batch input session

Hello Experts,
I am getting an error after creation of batch input session for program RFUMSV50.
If I run the session in foreground it gives velow error
program successfully worked 3 months back without any error but after that I am facing this type of issues.
Can anyone please guide what exactly missing in the configuration.
Regards,
ps

Hi Salvatore,
I'm in the same situation. I execute a BI, but it stops after a waring appears.
If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
Did you solved your Problem or did you have an hint for me.
Kind regards
Yvonne Adler

How to download error records after the session method executed in BDC?

Dear Experts,
How to download errors in session method after executing session method. Please dn't say for BDCMSGCOLL i have goggled all . every one answer for call transaction. In session method after executing we fill find all the success and errors in log file . But how to download this log file?
please help me.
Thanks
Ravilla

Hi Laxman,
Please find the below process .I hope this will suits to your requirement .
1)Write an error report.
2)Send the record(s) in error to an error file.
3)Create a BATCH input session with the record(s) in error.
To store error MESSAGES ( CALL TRANSACTION )
    data: begin of Tab_Mess occurs 0.
              include structure bdcmsgcoll.
    data : end of Tab_Mess,
CALL TRANSACTION ‘FK02’ USING BDC_TAB MODE ‘N’ UPDATE ‘S’
        MESSAGES INTO TAB_MESS.
       IF SY-SUBRC NE 0.
         WRITE: / Tab_MESS-TCODE, Tab_MESS-DYNUMB, Tab_MESS-MSGTYP ,
                        Tab_MESS-MSGID.
       ENDIF.
Regards,
Bharat Kumar

Batch input session for FI postings

At the time of batch input session processing for FI postings (Transaction FB01), session is terminated due to following error message -
Message no. 00349
Field BSEG-PRZNR. does not exist in the screen SAPMF05A 0302
Batch session has been created using LSMW for data upload. As per field status of the GL account, some of the line items may or may not require an entry for particular field. How can we ignore this error during batch input session when a field is not required to be input for a particular GL account. However, flat file format contains this field because it is required for some of the GL accounts.
Let me know if you need more information / example. I desperately need a solution.
Regards,

Dear Abhilasha,
Lets assume you have two gl accounts gl1 and gl2. gl1 requires this field to be entered, whereas gl2 does not allow you to enter value.
In this case, modify your logic as below:
I believe you can write code in LSMW as well.
However, if you are using BDC you can write logic as follows:
if gl_account_field = gl1.
PERFORM bdc_field USING 'BSEG-PRZNR'
value.
endif.
Hope this will help.
Regards,
Naveen.

Rename Batch input session name

I am generating a BIM after executing the depreciation run with a name "RAB" instead of "NL2Z".
But i am unable to process the wrong named BIM,
How can i change the Batch input session name to new one.

Hi,
@Andreas 1) Batch Name is an Authorisation Object
You will have to contact your BASIS people to get the authorisation to process the file.
Kind regards

Batch input data method

can i know about batch input method in BDCs?

Hi..,
DONT POST THE SAME THREADS AGAIN AND AGAIN !! CLOSE UR THREADS, WHEN UR PROBLEM IS SOLVED !! REWARD ALL HELPFUL ANSWERS !!
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
Features:
Asynchronous processing.
Synchronous updating in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
regards,
sai ramesh

How to see the Batch input session name in SM35 with User name.

Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.

Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike

How to delete batch input session still in process since year 2000

Hi All,
in our productive system we have still batch input session in process from year 2000, and I would like to delete them, but how to do this, because the error message is "Unable to schedule session .....".
Thanks for your help

Hi Olivier ,
Such error occurs when you are trying to run session in foreground and some error occurs with connection.
As such these session are not harmful in any way. You can request basis person to remove those sessions.
Regards,
Mohaiyuddin

Batch Input Session for Errors

Hello
I'm running a Batch Input (in a FM) and I want to create a session for records with errors. In case of error (output parameter of the FM subrc NE 0) I send it to that session for later running.
Can you explain how do I do this? Thanks!

hi,
Look at the sample program
REPORT Z_BDC_CUSTOMER_R07
 NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE Z_CUSTOMER_BDC_R02.
*-----AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
*-----group and user must be filled to create a session
 IF SESSION = 'X' AND
 GROUP = SPACE OR USER = SPACE.
 MESSAGE E613(MS).
 ENDIF.
*----Presentation File name should be entered
 IF SESSION = 'X' AND RB_PRE = 'X'
 AND P_FILE = '' .
 MESSAGE E004(ZROJA).
 ELSEIF CTU = 'X' AND RB_PRE = 'X'
 AND P_FILE = '' .
 MESSAGE E004(ZROJA).
 ENDIF.
*----Application File name should be entered
 IF SESSION = 'X' AND RB_APP = 'X'
 AND P_FILE_A = '' .
 MESSAGE E004(ZROJA).
 ELSEIF CTU = 'X' AND RB_APP = 'X'
 AND P_FILE_A = '' .
 MESSAGE E004(ZROJA).
 ENDIF.
ENDIF.
*-----AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
*----When file from Presentation server is selected
IF RB_PRE = 'X'.
*----To make the application server inactive
 LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'AAA'.
 SCREEN-ACTIVE = 0.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSE.
*----When file from Presentation server is selected
 RB_APP = 'X'.
*----To make the application server inactive
 LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'BBB'.
 SCREEN-ACTIVE = 0.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_A.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
 EXPORTING
 I_LOCATION_FLAG = 'A'
 I_SERVER = ' '
 FILEOPERATION = 'R'
 IMPORTING
 O_PATH = P_FILE_A
 EXCEPTIONS
 RFC_ERROR = 1
 ERROR_WITH_GUI = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*-----Function module for value-request
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = SYST-CPROG
 DYNPRO_NUMBER = SYST-DYNNR
 FIELD_NAME = ' '
 IMPORTING
 FILE_NAME = V_FILE_NAME.
*----Assigning the flatfile to parameter
P_FILE = V_FILE_NAME.
*-----START-OF-SELECTION
START-OF-SELECTION.
DATA: FILENAME TYPE STRING.
*----When file from Presentation Server is selected
IF RB_PRE = 'X'.
 FILENAME = P_FILE.
*-----Function module to upload data from the presentation server
 CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = FILENAME
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
 TABLES
 DATA_TAB = IT_KNA1
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ELSE.
*----Upload the File from Application Server
 OPEN DATASET P_FILE_A FOR INPUT IN TEXT MODE ENCODING DEFAULT.
*-----to display an error if the file is not in application server
 IF SY-SUBRC NE 0.
 MESSAGE E006(ZROJA).
 ELSE.
 DO.
 READ DATASET P_FILE_A INTO X_KNA1.
 IF SY-SUBRC EQ 0.
 APPEND X_KNA1 TO IT_KNA1.
 ELSE.
 EXIT.
 ENDIF.
 ENDDO.
 ENDIF.
 CLOSE DATASET P_FILE_A.
ENDIF.
*-----To open a batchinput session
IF SESSION = 'X'.
 CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 CLIENT = SY-MANDT
 GROUP = GROUP
 KEEP = KEEP
 USER = USER
 PROG = SY-CPROG
 EXCEPTIONS
 CLIENT_INVALID = 1
 DESTINATION_INVALID = 2
 GROUP_INVALID = 3
 GROUP_IS_LOCKED = 4
 INTERNAL_ERROR = 6
 QUEUE_ERROR = 7
 RUNNING = 8
 SYSTEM_LOCK_ERROR = 9
 USER_INVALID = 10
 OTHERS = 11.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
*-----Filling the BDCDATA using the Internal Table
LOOP AT IT_KNA1 INTO X_KNA1.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0100'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02D-KTOKD'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'RF02D-KUNNR'
 X_KNA1-KUNNR.
 PERFORM BDC_FIELD USING 'RF02D-KTOKD'
 X_KNA1-KTOKD.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0110'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-SPRAS'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'KNA1-NAME1'
 X_KNA1-NAME1.
 PERFORM BDC_FIELD USING 'KNA1-SORTL'
 X_KNA1-SORTL.
 PERFORM BDC_FIELD USING 'KNA1-ORT01'
 X_KNA1-ORT01.
 PERFORM BDC_FIELD USING 'KNA1-PSTLZ'
 X_KNA1-PSTLZ.
 PERFORM BDC_FIELD USING 'KNA1-LAND1'
 X_KNA1-LAND1.
 PERFORM BDC_FIELD USING 'KNA1-SPRAS'
 X_KNA1-SPRAS.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0120'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-LZONE'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'KNA1-LZONE'
 X_KNA1-LZONE.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0125'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-NIELS'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0130'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNBK-BANKS(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0340'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02D-KUNNR'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0370'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02D-KUNNR'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM BDC_FIELD USING 'KNA1-CIVVE'
 'X'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0360'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVK-NAMEV(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
*----If Session is selected
 IF SESSION = 'X'.
*----To insert data into batch input session
 CALL FUNCTION 'BDC_INSERT'
 EXPORTING
 TCODE = 'XD01'
 TABLES
 DYNPROTAB = IT_BDCDATA.
 REFRESH IT_BDCDATA.
 AT LAST.
 SKIP.
 WRITE:/ TEXT-001.
 ENDAT.
 ELSE.
*----Calling the transaction
 CALL TRANSACTION 'XD01' USING IT_BDCDATA
 MODE CTUMODE
 UPDATE CUPDATE
 MESSAGES INTO IT_BDCMSGCOLL.
 CLEAR IT_BDCDATA.
 REFRESH IT_BDCDATA.
 ENDIF.
ENDLOOP.
*----If Session is Selected
IF SESSION = 'X'.
*----To close the session
 CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 NOT_OPEN = 1
 QUEUE_ERROR = 2
 OTHERS = 3.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
*-----END-OF-SELECTION
END-OF-SELECTION.
*----To display the success messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'S' .
*-----If Message Type Differs
 ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
 WRITE:/ TEXT-002.
 SKIP.
 ULINE (58).
 WRITE:/01 SY-VLINE,02 TEXT-003,
 14 SY-VLINE,15 TEXT-004,
 21 SY-VLINE,22 TEXT-005,
 35 SY-VLINE,36 TEXT-006,
 58 SY-VLINE,/01 SY-ULINE(58).
 ENDON.
 WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
 14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
 21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
 35 SY-VLINE,36 TEXT-007,
 58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
SKIP 2.
*----To display the error messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'E'.
*-----If Message Type Differs
 ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
 WRITE:/ TEXT-008.
 SKIP.
 ULINE (58).
 WRITE:/01 SY-VLINE,02 TEXT-003,
 14 SY-VLINE,15 TEXT-004,
 21 SY-VLINE,22 TEXT-005,
 35 SY-VLINE,36 TEXT-006,
 58 SY-VLINE,/01 SY-ULINE(58).
 ENDON.
 WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
 14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
 21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
 35 SY-VLINE,36 'Customer Already Exits',
 58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
*-----FORM fill_bdcdata
FORM FILL_BDCDATA USING L_DYNPRO TYPE ANY
 L_FNAME TYPE ANY
 L_FVALUE TYPE ANY.
CLEAR X_BDCDATA.
IF L_DYNPRO = 'X'.
 X_BDCDATA-DYNBEGIN = 'X'.
 X_BDCDATA-PROGRAM = L_FNAME.
 X_BDCDATA-DYNPRO = L_FVALUE.
ELSE.
 X_BDCDATA-FNAM = L_FNAME.
 X_BDCDATA-FVAL = L_FVALUE.
ENDIF.
APPEND X_BDCDATA TO IT_BDCDATA.
ENDFORM. "BDC_FIELD
*-----Start new screen
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM. "BDC_DYNPRO
*-----Insert field
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
 CLEAR IT_BDCDATA.
 IT_BDCDATA-FNAM = FNAM.
 IT_BDCDATA-FVAL = FVAL.
 APPEND IT_BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD

Error while Running BRS Batch input session

Dear Gurus,
When i am running Batch input session after BRS statement posted, system giving Error message:
No batch input data for screen SAPDF05X 3100
Entered, saved and posted the statement. after that while processing session getting error like this........How to overcome.
Can we post statement directly without creating session.
Regards,
Venkat

Hi,
The ABAP Counterpart has to build an exception handling for this particular message.
Normally these messages occur either after an upgrade or after a change in the account(different filed status)
Provide points if usefull.
Thanks,
Praveen

Revaluation error"posting are in batch input session"

HI All,
we are using 6.0 version and user has executed revaluation for FEB month,they were practised to use the online postings, but when they excute the revaluation there was an error message for 3 accts " valauation kept in batch input session "and accounts determination is missing for these accounts" and when we check the batch input session using SM35 there is no session with error. How to work on this ?
Is there any particular transaction where we can check the batch input session and execute once the accounts are assigned ?
Plz advice us, and is necessary for closing the month end activity.
best Regards
Stephen

Execute the session either online or in display error mode. This will give you the exact point of error and also you will be able to get detailed error message.
Regards
Rakesh Pawaskar

How do I create a data set ready for a batch input session

Hi:
I don't know how to create a data set ready for an BATCH-INPUT SESSION.I know that with the function BDC_INSERT make de input online, but my requirement is that generate the data set and left to the user get in de SM35 transaccion and decide to him if it's execute or not. I have all the information in a BDCDATA table.
Any clue would be great!!

You just have to do:
BDC_OPEN_GROUP (Open new batch)
BUILD BDC DATA (Your own code)
BDC_INSERT (Insert BDC data you have built in step 2)
BDC_CLOSE_GROUP (Close batch)
This will just create a new batch and it can be processed in SM35.
To build BDC data:
LOOP AT your_input_table.
<<here you have to use the code generated from recording in trasaction SHDB>> (i.e. bdc_dynpro and bdc_field performs)
ENDLOOP.

How to process batch input session through program

Hi Friends,
I am getting 5 batch input sessions in SM35,but I want to process these all sessions through program without going to SM35.
How it is possible through Program?
Please Guide me!
Thanks,
Yogesh

Hi,
It's the report to run the batchinput sessions.
When you create to B.I. session, you can execute it by transaction SM35 (but it uses rsbdcsub) or rsbdcsub.
For example you can use it in the same program where you create B.I.:
Here the code to fill the structures of FI batch input
standard....
...here it creates session...
SUBMIT RFBIBL00 WITH DS_NAME = VA_FILE
WITH CALLMODE = CALLMODE AND RETURN.
....here it runs session....
SUBMIT RSBDCSUB WITH MAPPE = P_NAME
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH FEHLER = ' '
TO SAP-SPOOL
LIST NAME P_NAME
LIST DATASET P_NAME
COVER TEXT P_NAME
NEW LIST IDENTIFICATION ' '
EXPORTING LIST TO MEMORY
AND RETURN.
regards,
Shiva.

How to handile errors in batch input(session)method

Similar Messages

Maybe you are looking for