How to handle blank root element in xml source file

Hi There,
I have a dataflow which using xml source file. The job keep failing and I guess it might be caused by one of the root element which is blank. Can anyone advise me how to handle it?
The xml file look like this:
-<orderinfo>
--<orderdetail>
---<orderid>1</orderid>
---<orderdate>20110101</orderdate>
--</orderdetail>
--<abc />
-</orderinfo>
element <abc> is blank
Thanks and Regards,
BL

Hi Suneer,
The issue is DS cannot validate the source file at all. It returns error message when I try to preview the source file in the dataflow. Is there any work around I can implement other than request the source team to change the file layout?
Thanks,
BL

Similar Messages

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Multiple xml source file loading ?

Hi,
I've already managed to set some multiple flat file as source, but the question is :
How to set some multiple XML source files ? (to read ally xml files stored in a folder for instance)
I link the XML file directly in topology instead of doing it in my model. So how can I change the file name dynamically ?
Any advice ?
Thanks
Pierre-Henri

Hi,
all right I followed the explanation on this link :
Looping a folder for pattern files
The set up is ok, but I generate this error message :
The scenario did not end properly.
When I'm trying to run the interface alone (without v_FileName obviously), I get this error :
java.sql.SQLException: Table not found: D in statement ...
I created my XML model, then I defined it's ressource model as D:\mypath\001.xml. Into the interface, as my model uses XML technology, I can only use LKM SQL to SQL knowledge model.
When I look at operator, I can see it tries to run this following SQL code :
select
attribute 1,
attribute 2,
from     schema.D:mypath001.xml CD
where     (1=1)
schema.D:mypath001.xml is probably the wrong part :)
Do you have an idea to get your example (on txt files) running with some xml files ?
thanks for your time

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

The XML Source file is unavailable for viewing

Same java application is deployed on two different servers. One server is in the intranet zone and the second one is in the internet zone. The request sent to the server is an xml file and the response from the server is also an xml.
In intranet server, when we are trying to view the source of the response xml file , we are getting a prompt displaying the message "The XML Source file is unavailable for viewing".
But in internet server, when we are try the same, we are getting a valid xml resposne. We are using IE 6.0 - SP1 browser.
We tried the same in the mozilla browser and found the same results. Any suggestions on this?

One possibility is the IE security settings under tools/internet options. The intranet site may have a lower security setting than the internet site. The browser may not ne letting the internet site download the xml.

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to handle unknown root node type when parsing?

Hello all, hoping someone knows how to accomplish this...
I'm trying to use XMLBeans to parse RIXML 2.0 documents. This schema allows for
multiple root node types, so I don't know when I'm trying to parse a file if the
root node is a Research node or a Product node, for example. If I try to invoke
parse and there is a type mismatch I get the following error:
com.bea.xml.XmlException: D:\RIXML\V2TestDoc.xml:0: error: The document is not
a Research@http://www.rixml.org/2002/6/RIXML: document element local name mismatch
expected Researchgot Product
     at com.bea.xbean.store.Root.verifyDocumentType(Root.java:472)
     at com.bea.xbean.store.Root.autoTypedDocument(Root.java:394)
     at com.bea.xbean.store.Root.loadXml(Root.java:763)
     at com.bea.xbean.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:286)
     at com.bea.xbean.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:224)
     at org.rixml.x2002.x6.rixml.ResearchDocument$Factory.parse(Unknown Source)
     at Test.main(Test.java:21)
Exception in thread "main"
So how do I generically handle parsing when I don't know what type of root node
I'm going to get?
Thanks,
Joe

Hello Joe -- You might try parsing the document as XmlObject (which your
schema-generated types extend). Then you could use an XmlCursor to discover
what the root element's local name is. Something like the following code
might be a way to do it. You could also simply re-parse the document after
discovering its root element name, but that would probably be more
expensive.
XmlObject xml = XmlObject.Factory.parse(mydoc.xml);
XmlCursor cursor = xml.newCursor();
cursor.toFirstContentToken();
if (cursor.getName().getLocalPart().equals("Research"))
// cast the XmlObject to your ResearchDocument type and use it.
else if (cursor.getName().getLocalPart().equals("Product"))
// cast the XmlObject to your ProductDocument type and use it.
cursor.dispose();
Steve
"Joe Celentano" <[email protected]> wrote in message
news:[email protected]..
>
Hello all, hoping someone knows how to accomplish this...
I'm trying to use XMLBeans to parse RIXML 2.0 documents. This schemaallows for
multiple root node types, so I don't know when I'm trying to parse a fileif the
root node is a Research node or a Product node, for example. If I try toinvoke
parse and there is a type mismatch I get the following error:
com.bea.xml.XmlException: D:\RIXML\V2TestDoc.xml:0: error: The document isnot
a Research@http://www.rixml.org/2002/6/RIXML: document element local name
mismatch
expected Researchgot Product
at com.bea.xbean.store.Root.verifyDocumentType(Root.java:472)
at com.bea.xbean.store.Root.autoTypedDocument(Root.java:394)
at com.bea.xbean.store.Root.loadXml(Root.java:763)
atcom.bea.xbean.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:28
6)
atcom.bea.xbean.schema.SchemaTypeLoaderBase.parse(SchemaTypeLoaderBase.java:22
4)
at org.rixml.x2002.x6.rixml.ResearchDocument$Factory.parse(Unknown Source)
at Test.main(Test.java:21)
Exception in thread "main"
So how do I generically handle parsing when I don't know what type of rootnode
I'm going to get?
Thanks,
Joe

How to handle blank line in File adapter

Hi,
I am using a file adapter with CSV as input file. If I have a blank line in CSV file, BPEL is failing read it, no instance is created and file is archieved.
Please let me know how to handle this issue.
Thanks

Hi Yatan,
I am already using rejectedMessageHandlers, I am on 10.1.3.3.
Here's my bpel.xml
============
<?xml version = '1.0' encoding = 'UTF-8'?>
<BPELSuitcase>
<BPELProcess id="EmpAddressUpdABCSImpl" src="EmpAddressUpdABCSImpl.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="ReadFile">
<property name="wsdlLocation">ReadFile.wsdl</property>
<property name="rejectedMessageHandlers">file://E:/HRARCHIVE/BadData</property>
</partnerLinkBinding>
<partnerLinkBinding name="InsertAddressUpd">
<property name="wsdlLocation">InsertAddressUpd.wsdl</property>
<property name="retryInterval">60</property>
</partnerLinkBinding>
</partnerLinkBindings>
<configurations>
<property name="sensorLocation">sensor.xml</property>
<property name="sensorActionLocation">sensorAction.xml</property>
</configurations>
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="ReadFile">
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file://E:/HRARCHIVE/BadData</property>
</activationAgent>
</activationAgents>
</BPELProcess>
</BPELSuitcase>
Someone told me that this can be achieved by changing the native schema, I tried many options but no result. Please suggest me.
-- Shirish

Create Root Element in XML

Hi Experts,
I am develpoing a program to generate xml file as output. I am using the method CL_IXML and other interfaces to generate the xml data. Here I need to create a root element. I did search in SDN but I couldnot found anything to generate xml root element.
My output should be like this:
<?xml version="1.0" encoding="UTF-8"?>
<Request Version="11.1" IssuerID="1">
        <CreatePurchaseRequest
            RequestID="123456"
            Commonname="test"
        </CreatePurchaseRequest>
</Request>
Can anybody plz suggest how can I generate the root element Request here?
Regards,
Ranganadh.

Thanks Sandra,
My issue got resolved.
I just created the root element using the method create_sample_element and set the attributes using set_attributes method.
Thanks for your help.
w_ixml = cl_ixml=>create( ).
      w_document = w_ixml->create_document( ).
      w_root = w_ixml->create_document( ).
      IF w_document IS INITIAL.
        RAISE EXCEPTION TYPE cx_cmx_da_exception
          EXPORTING
            textid = cx_cmx_da_exception=>cx_cmx_da_error_internal.
      ENDIF.
      w_encoding = w_ixml->create_encoding(
                             character_set = 'utf-8'
                             byte_order    = if_ixml_encoding=>co_none ).
      w_document->set_encoding( w_encoding ).
      w_element_inv1 = w_document->create_simple_element(
                  name = 'OrbiscomRequest'
                  parent = w_document ).
      w_element_inv1->set_attribute( name = 'Version'
                                     namespace = ''
                                     value = '11.1' ).
      w_element_inv1->set_attribute( name = 'IssuerID'
                                     namespace = ''
                                     value = '1' ).

Unable to find root element in XML Schema when Syndicating (SAP MDM)

Hi experts,
We are having a problem with our Syndication.
We have created an XML Schema using XML Spy. We need a namespace, and this is 70 characters long (in other words, far shorter than maximum at 255 characters).
<xs:schema xmlns:ns="http://schemas.xxxxx.com/ServiceManagement/ServiceMasterDataFromMDM/0.3" xmlns:xs="http://www.xxxxx.org/2001/XMLSchema" targetNamespace="http://schemas.xxxxxx.com/ServiceManagement/ServiceMasterDataFromMDM/0.3" elementFormDefault="unqualified" attributeFormDefault="unqualified">
When opening the xml schema file in Syndicator, the root field is disabled.
If we remove namespace in heading of xml schema, the root field is enabled, and the root element is correct.
How can we make use of the XML schema when we need namespace?
We have tried to add namespace annotation ns: to all type definitions:
<xs:element name="ServiceCategory" type="ns:ServiceCategoryType">
This did not help.
Please advice.
KR,
Thomas
Edited by: Thomas on Mar 2, 2011 2:12 PM

>>We need a namespace, and this is 70 characters long
If you want namespace to appear in XML and your XSD has it too. please add the namespace under "URI" attribute in XML schema in Console.
You need to import the XSD in Console first, specify namespace under URI and then use this to build syndication map.
Thanks
Aamir

How to Handle Blank Field Value based Condition in SmartForms

Dear Sir,
In SMARTFORM , we need to define a Condition that incase Field Value is not equal to BLANK value (blank means that field is empty) then a specific text gets printed .
Our problem is that We do not know as how to define Empty Field Value based condition .
Had it been Non Empty Field value based condition then solution was simple and could be done in following way :
Field Value                        R                     Comparision Value
WA_KZDKZ                      =                      'X'
In our case , we need to give Blank (Empty Value) instead of 'X' .
Kindly help us pl .
Rgds
B Mittal

Hi,
To handle blank field values in SMARTFORMS,
Go to the conditions tab in your SMARTFORM and give condition there
Field                Comparision operator          value
<Field name>      <> Here symbol is diff     space.
eg:
wa_mara-matnr    =/                                   space.
Regards,
Santosh Kumar M.

Root Element Expected - XML-0801 using example w/Oracle 8.1.6

Using the XSU readme release example #7 (Inserting XML values into all columns JAVA) gave me the same error several other threads had. I wonder if anyone got theirs to work? Using this XML in file C:\insert.xml :
<?xml version='1.0'?>
<ROWSET>
<ROW num="1">
<EMPNO>7369</EMPNO>
<ENAME>Smith</ENAME>
<JOB>CLERK</JOB>
<MGR>7902</MGR>
<HIREDATE>12/17/1980 0:0:0</HIREDATE>
<SAL>800</SAL>
<DEPTNO>20</DEPTNO>
</ROW>

</ROWSET>
and this code snippet:
Connection conn = getConnection("scott","tiger");
OracleXMLSave sav = new OracleXMLSave(conn, "scott.emp");
// Assume that the user passes in this document.
// Save it in to the table.!
sav.insertXML("C:\\insert.xml");
sav.close();
Any help would be greatly appreciated! Thanks ...

actually there seems to be some pasting error and the way i have it in BI Publisher is:-
<xml name="DovicoSK3" expressionPath=".//ROW[TRANS_ID=$TRANS_ID]">
<url method="GET" realm="" username="" password=""> file:///C:/OracleBI/xmlp/XMLP/DemoFiles/DovicoSK3.xml</url>
</xml>
Edited by: user3610205 on Jun 18, 2009 12:26 PM
(Note:- Some pasting issues
1.Square brackets are not seen after "ROW" and after"TRANS_ID"
2. "TRANS_ID" seen in strange way)
Edited by: user3610205 on Jun 18, 2009 12:28 PM
Edited by: user3610205 on Jun 18, 2009 12:32 PM

How to use the same element in different photoshop files?

It occurs to me often that I use the same element in different photoshop files, a header or footer shown in the example below. So when the footer changes in one document, I need to change this footer in every other single document.
Is there a possibility to use some kind of template, one single document, that can be placed in different files , which is still editable afterwards?
Thanks in advance.
I'm using Photoshop CS6

In a single document you can have several pages and these pages may have headers and footers that share smart objects. If you replace the contents of the an embedded smart object on one page page that is shared on an other page the pages you will see both pages contents are changed. For they share the common object. It is also possibly to have independent smart object layers. It depends how you create the layers in the single document.
Example one sharing a smart object hi-light a smart object layer and use menu layer>Duplicate Layer... This will create a second smart object layer that share a common smart object. Each layer has is own associated transform. Do it again and you will have three layers the share a common smart object. So you can use each layer associated transform to position and size the layers contents. Make a picture package for example. When you hi-light any of the three smart layers and you use menu Layer>Smart Objects>Replace Contents... all three layers contents will be replace with the new smart object. Care must be taken to replace the smart object with an identical size object for only the object is replaced the three associated transform for the three layers are not replaced or changed.
Example two independent smart objects hi-light a smart object layer and use menu layer>Smart Objects>New Smart Object via Copy. This will create a second smart object layer that has it own embedded smart object copy. Do it again and you will have three all have independent embedded smart object that are identical. However they do not have to remain identical. For example if the first smart object layer was created by using ACR to open a RAW file as a smart object layer the embedded object is a copy of the raw file and its associated RAW conversion settings. Double clicking on one of the smart object layers and you will see ACR open on its embedded RAW file with the embedded RAW conversion setting. Changing these settings will update the layer smart object content with new ACR setting and pixel when you click OK in ACR. Repeat for the third and you will find you have three different raw conversions in Photoshop you can mask and blend together to bring out detail.
I think what your missing is that a smart object contains a copy of the original object. Changing the original after creating a smart object layer in document will not effect the smart object layer at all. Its independant from the original having a copy of the original. Only changes to the smart object layer and its embedded smart object effect smart object layers.

How to handle trailing Null columns in a Batch file when ESB reads the file

Dear All,
How can I handle trailing Null columns in a batch file (csv file) that is been used by an ESB FTP adapter for batch file processing.
Since ESB is some times taking up the whole next record as the last column data..
Please update
many thanks...

If your file is not designed to be amazingly large, then you don't need to use a temporary file -- you can just read the data into memory and manipulate it there. (Like, into a Document object or something.)
But if you are dealing with really large files, you might want to consider using a database back end instead of a text file, which is a completely different approach I know but... well, that's why databases were invented.

How to handle blank root element in xml source file

Similar Messages

Maybe you are looking for