How to handle blank line in File adapter

Hi,
I am using a file adapter with CSV as input file. If I have a blank line in CSV file, BPEL is failing read it, no instance is created and file is archieved.
Please let me know how to handle this issue.
Thanks

Hi Yatan,
I am already using rejectedMessageHandlers, I am on 10.1.3.3.
Here's my bpel.xml
============
<?xml version = '1.0' encoding = 'UTF-8'?>
<BPELSuitcase>
<BPELProcess id="EmpAddressUpdABCSImpl" src="EmpAddressUpdABCSImpl.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="ReadFile">
<property name="wsdlLocation">ReadFile.wsdl</property>
<property name="rejectedMessageHandlers">file://E:/HRARCHIVE/BadData</property>
</partnerLinkBinding>
<partnerLinkBinding name="InsertAddressUpd">
<property name="wsdlLocation">InsertAddressUpd.wsdl</property>
<property name="retryInterval">60</property>
</partnerLinkBinding>
</partnerLinkBindings>
<configurations>
<property name="sensorLocation">sensor.xml</property>
<property name="sensorActionLocation">sensorAction.xml</property>
</configurations>
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="ReadFile">
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file://E:/HRARCHIVE/BadData</property>
</activationAgent>
</activationAgents>
</BPELProcess>
</BPELSuitcase>
Someone told me that this can be achieved by changing the native schema, I tried many options but no result. Please suggest me.
-- Shirish

Similar Messages

How to handle large data in file adapter

We have a scenario Proxy -> PI -> File Sever using File adapter.
File adapter is using FCC for conversion.
recently we had wave 2 products live and suddenly for this interface we have increase in volume of messages, due to which File adapter is not performing well, PI goes slow or frequent disconnect from file server problem. Due to which either we will have duplicate records in file or file format created is wrong.
File size is somewhere around 4.07 GB which I also think quite high for PI to handle.
Can anybody suggest how we can handle such large data.
Regards,
Vikrant

Check this Blog for Huge File Processing:
Night Mare-Processing huge files in SAP XI
However, you can take a look also to this Blog, about High Volume Messages:
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
PI Performance Tuning Best Practice:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7?QuickLink=index&overridelayout=true&45896020746271

How to handle rejected messages in file adapter

Hi....! every one.........
in file adapter read operation it will pick the files even the file contains unstructure message but that file wont be processed.
where the rejected message goes.
i have requirement like that rejected message i have to store in another file
please provide me answer..........

Hi,
You can add the parameter 'PhysicalErrorArchiveDirectory' in the JCA file (of the File Adapter).
Put there the required directory where you want the rejected file to be sent.
You can add this property in 2 ways:
1. In your JDeveloper open the JCA file and add: <property name="PhysicalErrorArchiveDirectory" value="/../.."/>
2. In EM, right click the composite->Service/Reference Properties->Choose your file->On the Properties tab press Add-> Choose 'PhysicalErrorArchiveDirectory' and put the directory-> press Apply.
Arik

How to handle errors in a file at sender side?

Hi
I have done a file to proxy scenario.
I know how to handle errors on proxy.
But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record..
I wanted to process the records which have right format and data and all remaining recrods which have wromg format should be send back to the sender as file.
How to do this.
How to handle error in sender file.
Regards
Sowmya

Hello Sowmya,
In your scenario Three ways you can validate the data.
1) Before the data reaches into SAP system ie in XI system during Mapping or before mapping i,e in Adapter Module in the Sender side
2) this option, is in the receiver applications side. ie. Validations will be taken care in the SAP system i.e in ABAP server proxy code.
3)Through BPM, If Mapping Exception Occures then through exception Branch you can send bad formate file to sender again.
Generally, it is prefer to more business critical validations in the Application System ie Receiver Application System (ABAP Server Proxy)
In this, you can have more flexibility of the validations as you are validating some of the SAP payroll informations as Personal ID etc.
Based on the complexity and flexibility of the requirement, you can either do this in the XI (if XI, ie Sender Adapter Module or Mapping) or in the ABAP proxy
Thanks'
Sunil Singh

Java command line in File adapter

Hi all,
In my receiver file adapter (FTP), I want to use the option "Run operating system command after message processing". In the command I want to execute a java class. Can anybody have information about how to do that ?
My command line in the following : "java myPackage.MyClass %F". This command line works fine on my machine but I don't know how to do when on XI File Adapter (where to set the jar file, ...)
Thanks in advance,
Laurence

Hi Laurence
XI Command Line Functions::
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
1)Windows batch Commands::
http://labmice.techtarget.com/articles/batchcmds.htm
2)Linux:
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
regards
Piyush
Pl: reward points if it is helpful.

How to handle the java.policy file ?

Can somebody tell me how to handle the java.policy file?
I always get java.net.SocketExceptions and java.security.AccessControlExceptions while connecting to an appserver from an applet.
What do I have to write in the java.policy file, where do I have to place it and do I have to call it in some way form my applet?
Thanks in advance.
don call

The java.policy file goes in your jre installation directory in .../jre/lib/security (there should be one there already).
I used it to allow otherwise restricted permissions for an applet using javax.comm. Add something like the following to the file:
grant codeBase "URL:http://yourDomainName/rootDirectoryOfYourApp/*" {
permission java.security.AllPermission;
This will give the applet downloaded from your site all permissions. You might want to give only certain permissions, I don't know.
Teri

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

How to insert blank lines in the ALV output.

Hi Friends,
Could any body help me out How to insert blank lines in the ALV output.?? Any Code pls...
Thank you,
Vikram.C

hi vikram
do like this
In the fieldcatalog table all the fields should be in editable mode
ie lw_fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
is_layout = lv_layout
it_fieldcat = lt_fcat[]
i_save = 'A'
is_variant = lv_variant
TABLES
t_outtab = lt_license[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_data
*& Form user_command
FORM user_command USING r_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN 'ADD'. "
data: lv_ind type i.
data: lv_line type i.
describe table lt_license lines lv_line.
loop at lt_license into lw_license.
lv_ind = sy-tabix.
if lv_ind = lv_line.
append initial line to lt_license.
endif.
endloop.
ENDCASE.
ENDFORM. "user_command
reward points if useful
Rohan

How to create blank line in alv output

Hi all,
Iam getting alv output with currency values like below
text1    20.0 10.0 30.0
text2    25.0 11.0 30.0
text3    27.0 19.0 30.0
text1    24.0 18.0 30.0
text2    27.0 16.0 30.0
text3    29.0 15.0 30.0
text1    23.0 17.0 30.0
text2    22.0 13.0 30.0
text3    21.0 14.0 30.0
and so on...
My requirement is to create blank line after text3. Since its currency field even i claer work area iam able to get 0.0.
If i use no-zero in field catalog i will be able to get blank values for all 0.0, but thats not required.
Can u help me out how to crate blank line after one set of values(text1, text2, text3) in alv display
Thanks

Hi,
If i use no-zero, then all 0.0 will be replaced by blank, but that is not required.
I want only blank line to be displayed after set of line items.
Skip doesn't help in alv. Secondly if i append blank work area i will be getting 0.0 as it is a currency field.

How to skip blank line (EOF char) at the end of the file while creating ?

Hi,
In my program I have to create a file in Text mode using OPEN DATASET statement. This file is being sent to a third party system for their processing. I came to know while creating the file using OPEN DATASET, one LF character is inserted end of the file resulting a blank line end of the file. Thus if my internal table contains 5 reocrds, in the created text file I can see 6 lines where last is a blank. My question is how to remove this blank line which is causing issue in the thirdparty system.
Here is the Code I have used.
   TRY.
Write the file in Text Mode
        OPEN DATASET lv_outpf FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE
                             WITH SMART LINEFEED
                              MESSAGE lv_msg.
        IF lv_msg IS NOT INITIAL.
          WRITE / lv_msg.
          EXIT.
        ENDIF.
        LOOP AT itab_new INTO st.
          TRANSFER st TO lv_outpf.
        ENDLOOP.
        CLOSE DATASET   lv_outpf.
      CATCH cx_root.                                    "#EC No Handler
    ENDTRY.

an effective way to do it:
open your dataset in binary mode, transfer the records but between each record transfer the LF (or CRLF according to your need)
after the last record you don't transfer the LF

How to handle blank root element in xml source file

Hi There,
I have a dataflow which using xml source file. The job keep failing and I guess it might be caused by one of the root element which is blank. Can anyone advise me how to handle it?
The xml file look like this:
-<orderinfo>
--<orderdetail>
---<orderid>1</orderid>
---<orderdate>20110101</orderdate>
--</orderdetail>
--<abc />
-</orderinfo>
element <abc> is blank
Thanks and Regards,
BL

Hi Suneer,
The issue is DS cannot validate the source file at all. It returns error message when I try to preview the source file in the dataflow. Is there any work around I can implement other than request the source team to change the file layout?
Thanks,
BL

How to handle a fixed length file without newline?

Hi Experts,
I'd like to handle a fixed length file without newline by sender file adapter.
A file like following.
It contains three recores."AAXBBBXCCCCX" is one record.
AA1BBB1CCCC1AA2BBB2CCCC2AA3BBB3CCCC3
I tried that following two parameters set. But only first recored was read.
fieldFixedLengths
fieldFixedLengthType
Please tell me how to handle.
Thanks
Shinya Kawagoe.

For this case we wrote a simple Adapter Module inserting an end of line character after an offset.
This way it can be reused in many interfaces.
And reading the whole file may not be an option in case of large source files. May cause performance / memory issues.
eolbean.offset = <recordLlen>
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A;
int current = 0;
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen;
do
     lines--;
     baos.write(content, current, recordLen);
     if (lines > 0) // if other lines, eol required
          baos.write(crlf);
          current += recordLen;
} while (lines > 0);
xmlpayload.setContent(baos.toByteArray());
baos.close();
Audit.addAuditLogEntry(key, AuditLogStatus.SUCCESS,     MODULE + " Done EOLing.");

How to skip blank line in FCC

Hi,
How to deal with blank rows in FCC for fixed width file?
I want to ignore these records as they will fail the message in mapping.
thanks,
Anirudh.

Hi
Look this thread might help u
Blank line in receiver file adapter content conversion

Remove blank line after File Content Conversion

I have a File>Conversion on PI7.0 (SP10).
It seems to add a blank line. The XML is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:EPIWCountFile xmlns:ns0="urn:com.somewhere.overthere.nothere">
<Personal_Area>LU</Personal_Area>
- <detail>
<recordCount>17</recordCount>
</detail>
</ns0:EPIWCountFile>
The conversion is done:
recordset Structure=detail,
name=detail.fieldseparator ,
The output file is
17
Hopefully you can see the blank line before the number!???
I have changed the contexts while processing, and played with other options, but it always adds a blank line at the begin.
All this file is a count of the number of records processed. (The personal_area is for a variable name for file/folder creation)
How can I remove the blank line, as the target system fails due to this anomaly?

If you are in a development environment, try this
Make your target structure
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:EPIWCountFile xmlns:ns0="urn:com.somewhere.overthere.nothere">
- <detail>
<b><Personal_Area>LU</Personal_Area></b>
<recordCount>17</recordCount>
</detail>
</ns0:EPIWCountFile>
Content conversion parameter
detail.fieldFixedLengths 0,2
detail.fixedLengthTooShortHandling Cut
P.S: If you need <Pesonal_Area> tag only for File/Folder Name, then why dont you use Adapter specific Identifiers to achieve the same.
Regards,
Jai Shankar

Reading Multiple lines using File Adapter in PI 7.1

Hi Friends,
We are using PI 7.1 Service pack 4, scenario is File to IDOC .
I am using Sender File Adapter with File content conversion for fixed lengths to read file from FTP XI-SAP.
File Format :
EDI_DC40 , A, B, C, D, E
E1WPU01, F, G,H, I
E1WPU02 , J,K,L
E1WPU02 , J,K,L
I have maintained Fcc parameters . I am able to read files for mulitple rows when manually set the count in recorset structure
like :
Recordset Structure : EDI_DC40,1, E1WPU01,1, E1WPU02,2...
Problem is when I set * in Recorset Structure : EDI_DC40,1, E1WPU01,,E1WPU02,
Nothing is coming .
Could anyone help me how to resolve this issue.
Regards,
Vijay

Hi Vijay,
As u mentioned in earlier post...
keyfieldName = TABNAM
EDI_DC40.fieldNames :
EDI_DC40. fieldFixedLengths:
EDI_DC40.keyFieldValue :
E1WPU01.fieldNames :
E1WPU01.fieldFixedLengths:
E1WPU01.keyFieldValue
E1WPU02.fieldNames :
E1WPU02.fieldFixedLengths:
E1WPU02.keyFieldValue
Here actually you are trying to get the key field value even from EDI_DC40 and E1WPU01 also....
So obviously u dnt have those values in that rows so.. it cannot get the rows....
So please u try this one..... The same FCC but remove the 2 lines.... for EDI_DC40 and E1WPU01
keyfieldName = TABNAM
EDI_DC40.fieldNames :
EDI_DC40. fieldFixedLengths:
E1WPU01.fieldNames :
E1WPU01.fieldFixedLengths:
E1WPU02.fieldNames :
E1WPU02.fieldFixedLengths:
E1WPU02.keyFieldValue
I hope this wil solve ur problem..
Lemme know if any issues...
Thanks & Regards,
H.L.Babu

How to handle blank line in File adapter

Similar Messages

Maybe you are looking for