How to Handle the lower and upper case in 'POPUP_GET_VALUES'
Hi All
i am using the following FM and when i enter value on the
popup in lower case or with capital letters i see the field
with upper case ,this is problem for me since i need to
take the field and compare it ,there is a way to handle this
issue ?
CALL FUNCTION 'POPUP_GET_VALUES' "#EC FB_RC
EXPORTING
popup_title = lv_head_msg
IMPORTING
returncode = lv_rc " User response
TABLES
fields = lt_field " Table fields, values and attributes
EXCEPTIONS
error_in_fields = 1
OTHERS = 2.
Best regards
Alex
Hi Alex,
This because, the field and table name that You are passing in lt_field, has a conversion attached to it, which causes the converison in case.
For e.g. If You pass MARA-MATNR and try to get the values from pop-up, the value will get converted to upper case, but if You pass MAKT-MAKTX (which does not have a converison attached to it), the value will be retrieved as it was entered. This is standard SAP, which is correct.
If You need to get values of any text field, pass any SAP text field as reference in your table lt_field. Hope this helps...
Rgds,
Birendra
Similar Messages
-
I have a macbook air. It felt down from my hand on its corner and has damaged. The up-left corner is chamfered like 0.5 cm on both lower and upper cases. I would like to know what can I do to repair its body since there is not any software problem with it. Does apple fix it and if yes, how much does it cost.
Thank you.Welcome to the Apple discussions.
Yes, Apple can repair. You'll have to take it to the Apple store to find out the cost, and you should probably be sitting down when they tell you the cost. -
How to handle the control records in case of file to idoc scenario.
Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri -
SharePoint crawled property with both lower and upper case
I have web page which has meta tag, like CN_ABC, then after I crawled these pages, and when I try to map this property to a managed property, I always see there are two crawled property available, one is CN_ABC, the other is CN_abc, only difference is
the lower case and upper case, I have seen this in many other site and many other meta tag, what was happening?The meta tag you mean is a site column created for the page library?
This doesn't seem can be happened, if it is a site column, then it will create a crawled property for the column, named like: ows_sitecolumn, also, CN_ABC, CN_abc is not to distinguish lower or upper case, it should be CN_ABC or cn_abc.
I would suggest you to delete the related crawled property for the column, then do a full crawl, check whether it is happened, if it insistes, map the crawled property to different managed property, whether it returns same value.
Thanks,
Qiao Wei
TechNet Community Support -
Translate search parameters to lower and upper case
Hi All,
I need to create a search function. Is it possible to translate the search paramaters to both upper and lower case because inside the data there are data with upper case or lower case or both.
Thanks in advance.Hi ,
As per your requirement you have to write logic for three conditions :
1. Translate whole word into upper case .
TRANSLATE your field name TO UPPERCASE.
2. Translate whole word into lower case .
TRANSLATE your field name TO LOWERCASE.
3. First character of your field should be in uppercase rest in lower case .
so write your logic now considering third point also .
Regards ,
Nilesh Jain . -
Duplicate members in lower and upper case
Hi
In BI I/O duplicate members are there in lower and uppercase. How to suppress these members while loading into BPC dimension.
regards
MahiHi Raghu
In my case I want to load one of the duplicate members in BPC dimension. Say XYZ and xyz are two members in my BI I/o. but I want to load only XYZ or xyz. I know selection option will work for loading transaction data for a set of members.
regards
Mahi -
There is a difference between how PE8 handles the panel and bin with Windows 7 and Vista.
In Vista, the panel bin closes wehen unchecked in the Wndows menu. The same procedure in Windows 7 collapses the panel. Or am I wrong?
10G의 경우엔 제가 보니 SELECT List에 dept테이블에 대한 테이블을 엑세스할 컬럼이 없으니 당연히
한쪽 테이블만 엑세스하고 끝났네요.
dept테이블의 deptno컬럼이 있으나 테이블을 엑세스할필요는 없고요.
밑에것은 당연히 해쉬조인으로 풀리는것이 맞군요.
제가 잘못보았읍니다. -
Photos lower and upper menu don't disappear
hi
When browsing photos the lower and upper menu used to disappear after a few seconds. Now they don't. They stay over the top and lower part of the photos. Is there a place where you can change settings for this?
Thanks
SamiHello Sami,
In addition to the suggestions offered so far, without the ability to restore the iPhone, there are only a couple of things I can suggest.
There are two methods that should turn off the, as mentioned, a tap on the display should get the bars to vanish. Holding your finger on a section of the image for about 1-2 seconds should also get the bars to turn off.
There is no built-in setting that controls the display of the bars.
You mentioned that you've "rebooted" the iPod. Did you mean powering it down and restarting it, or actually resetting it by holding down both buttons. If resetting with both buttons doesn't resolve the issue, the next step(s) would need to be done when you are back at your computer. Once you are back at your computer, the first thing you may want to do is import the pictures into whatever photo software you are using. -
How to set up an automatic upper case at the begining of a sentence
Can someone help me if or how to set up an automatic upper case at the beggining of each sentence. I am doing huge amount of writing and just got fed up with it.
What application? Pages? If so, that option (and many others) is not available in the current version. You can use the previous version which should be in your application folder. Or you can do what I finally did and use Open Office or Libre Office.
-
How to convert a string from upper case to lower case in FOX formula
Hi Experts,
How to convert a string from upper case to lower case in FOX formula?
Thanks,
Cheers!!!
PANKAJThe last result.append( c ) should be:
result.append( Character.toLowerCase(c) ); -
To convert the values in the column from upper case to Camel Case.
Hi All,
I have requirement to convert the column values(Data in the Columns) from upper case to camel case in pivot table view.
For Eg:
I have
Table Name:Billing_Transaction
under Billing_Transaction table i Have column Comment_Text
Data in Comment_Text Column is
INSERT,
EXPORT,
AMEND
How i will change these values in to Insert,Export,Amend.(Camel Case condition)
I want only the first letter of a word to be in caps and others to be in smaller case.
Thanks,
Chitra Subramani.Hi Aravind,
Thanks for immediate response.your query is helpful.But i need to satisfy another condition in my requirement by using same formula.
"REPLACE(UPPER(SUBSTRING(BILLING_TRANSACTION.BILLING_TRANSACTION_DESC FROM 1 FOR 1)) || lower(substring(BILLING_TRANSACTION.BILLING_TRANSACTION_DESC FROM 2)), '_', ' ')"
above query satisfying Camil case and replacing '_' with ' '(space)......but inthis query i want add another condition to satisfy camil case for word which comes after '_'
for example:
DECLINE_IMPORT
above query satisfying 2 conditions to convert above data into
"Decline import"
But in my requirement for word 'import' also it should come in camil case condition like
"Decline Import"
Thanks & Regards,
Chitra
Edited by: user6371773 on Apr 25, 2011 6:29 AM -
How to handle the stale cheques in EBRS
Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroeHi
any bady know about this plz respond.
Thanks in Advance
kishore -
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA
HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBAThanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
L_STATUS TYPE SWR_WISTAT-STATUS,
L_NEW_STATUS TYPE SWR_WISTAT,
L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
RECEIVING
RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
EXPORTING
WORKITEM_ID = LCL_L_WID
STATUS = L_STATUS
USER = SY-UNAME
LANGUAGE = SY-LANGU
DO_COMMIT = 'X'
IMPORTING
NEW_STATUS = L_NEW_STATUS
RETURN_CODE = SY-SUBRC
TABLES
MESSAGE_LINES = L_SWR_MESSAG
MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa -
Zero Fill and Upper Case in Visual Composer not working
Hello,
I am building my first VC application and hit a small wall from get go. When I create input fields and set text formats for one to have "Zero Fill" and for the other one "Upper Case" they do not seem to work properly.
Zero Fill does not work at all. I set this format and also set max length as 10 to be used as input for customer account #. But it does not perform conversion. When I call a BAPI to get customer list, if I enter 0000000100 it works. When I enter 100 it does not work. Thus "Zero Fill" does not take effect.
"Upper case" works but only after refresh. If I enter ac10 as company code and then click submit it does not work. However if after entering ac10 I press enter and then submit, it work.
Does anyone have any info on how to deal with this? We are using VC 7.0
Thanks,
AlexHi ALex,
Now I got your problem. I suggest a solution for it.
Go to the design board of VC.
I think you have an Input Form that contains the input fields and the Submit button. There will be a link named "submit"between the Input Form & the Data Service(say BAPI). Click on the submit link, you will get the Input Fields & Assigned values of the Input Form at the bottom right side. Go to the Assigned Value of the particular field & apply a formula like UPPER(@inputfield). So now whatever case you give in the inputfield, it is converted to UPPER case before Submiting the values.Keep the Upper Case option checked at the formatting tab of the Input field properties, this will help to display the value in Upper case.
For eg, BAPI_BANK_GETLIST, the input fields are BANK_CTRY & MAX_ROWS.
Make the assigned value of bank_ctry as UPPER(@BANK_CTRY), you can get this with the help of formula.
This will solve your problem.
Regards,
Shemim -
Small caps - is there a way to change size ratio of lower to upper case?
I am using Adobe InDesign CS4 and one problem I've had is that when I select Small Caps on the character styles panel, lower case characters are about 60% the size of upper case characters. I'd like this to be more around 80% in my document.
I don't see a way to do this, so I'm having to avoid using Small Caps and am having to select various portions of each word and set them to different sizes.
Is there a setting I am missing for Small Caps that would save me this trouble? My typeface is Minion so I may also see if there's a variant available that uses well-crafted small caps.
TimDave,
>.. adjust the size of the "lowercase" characters by using a GREP style
Yes ... and no.
It doesn't have to be an extremely complicated GREP style. You mention Unicode ranges, but it's not even necessary. You could try
>[a-z]
to select all lowercase characters, but it leaves out accented ones. Now specifying ranges for these doesn't work very good (to put it mildly), because they do not appear consecutively in the Unicode set.
Fortunately, GREP has a wildcard
>\l
for "lowercase", and this matches
i every
lowercase character (even Greek and Russian ones). It's equal to the POSIX expression
>[[:lower:]]
As this seems to work just the way you want, then why the "No"? The GREP style will be applied to
i all
lowercase characters in the paragraph, not just to the words you wanted.
[Warning: Dirty trick follows. Do Not Copy Unless Forced To.]
Of course you can
i force
the GREP style pick up 'unique' words by making them unique somehow. If you insert an invisible character
i before
and
i after
the words you want to mark -- in the case at hand, the ones you want to small-capitalize --, you can include the invisible characters in the GREP style. For example, by specifying
>~-\l+~-
you can "mark" words by inserting a soft hyphen before and after certain words. (This example also presumes only lowercase characters inbetween.) You don't have to use the soft hyphen, there are a couple more markers you could (ab)use. I think I'll leave it up to your imagination to wonder where it could possibly go wrong.
Maybe you are looking for
-
after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please
-
Fillable fields disappearing in Acrobat pro 9
I am having a problem with a fillable form I distributed where some are being returned with fields that have been deleted. Here are the details I have so far: When I say deleted I do not just mean blank. When I tell the form to highlight fields there
-
InDesign Newbie in need of assistance
Hi, I hope I am in the right place. I need to produce a book, and am looking for a bit of guidance. The templates have been created in Photoshop. I will also need to include photos and text and am wondering I am better of (for quality purposes) addin
-
Populate User Name from Sharepoint Server to Certificate
Hello: I work for a govt contractor and we are loading our CBT on a Sharepoint server. The server guys have created a hidden field within my HTML file called Input html ID: CBTUserName So when the user accesses the CBT from the Sharepoint Server (whi
-
Reader extensions vs Document security order
Hi! I need to process the document by both the Reader extensions and Document security. If I do first Reader extensions and than certify document, reader extensions becomes invalid. If I certify document first and than proceed reader extensions, big