How to handle the pop-up Screen in LSMW - Recording

Hi,
I am doing the LSMW-Recording for Pricing Conditions.there are so many condition types are there.
my problem is while uploading the data from flat file,if record alredy exists in SAP system, it will display one Pop up screen, says "the record already exists do you want to overlap it".so that time it has to hit enter and has to overlap the existing records.
can any one please help me..this is very urget to me.
Points will be awarded for correct response.
Thanks,
Shobha

Hi,
Go to Maintain Field Mapping and Conversion Rules
Insert coding at __BEGIN_OF_PROCESSING.
Like:
Select .....
if sy-subrc = 0. "Record found
skip_record.
endif.

Similar Messages

How to handle the pop-ups in va02 transaction in Call Transaction Method

Hi Experts ,
I am trying to do bdc by call transaction method for va02 transaction but i am getting popups .
How can i handle the popups and for different sales orders i am getting different popups.
is there any way to handle the pop ups dynamically.
Thanks ain advance.

hi,
when you are using BDC then you will have to handle all the popups. this is minus point in using bdc as you need to feed each and every single bit of information so that bdc works fine and if anything misses then your bdc program will get stuck in middle of processing.
best thing is check for function module or BAPIs available for those transactions. For VA02 there is a BAPI available ''BAPI_SALESORDER_CHANGE''. Try using this BAPI and if this BAPI doesnt handle the change you want to make in sales order then only go for BDC.
you can also check BAPIs available in 'BAPI' tcode.
hope this is helpful.
Regards,
Saba

Each time I connect my iPad to computer, the pop up screen on the computer will show another name not my iPad name. The name shown on iTunes in device are is my iPad name. How would I rename it? Please help!

Each time I connect my iPad to computer, the pop up screen on the computer will show another name not my iPad name. The name shown on iTunes in device are is my iPad name. How would I rename it? Please help!

Gotcha, sorry, I'm guessing you are referring to Windows Autoplay. This should do it:
Type regedit into your search bar and bring up Registry editor. Go to the the very top with My Computer. Now go to Edit and Find. Type in the whole offending name that is bugging you, i.e. Soandso's iPhone and hit find. After it searches your registry and finds the first name select it and Edit the Name. I copy/pasted it for all the next steps. After you have found the first name don't stop there. Use F3 to find next Name in registry and So on and so fourth until you have replaced every offending name in your whole registry with the Name you want to show up i.e. Tom's iPhone or whatever? Repeat all of these steps if you have more than one name showing up in your devices? Worked 100% for me. Close regedit and reboot (very important for changes.) Plug your iPhone back in and enjoy all your names back to normal.

Using wireless 4G Sierra dongle. how can I stop the pop up screen trying to modify configuration when I connect

I am using wireless 4G Wireless Sierra dongle. I have a Mac Air. How can I stop the pop up screen trying to modify configuration when I connect. I can connect with no problems but I have to click 'cancel' (on pop up screen that says network needs to modify my configuration) sometimes as many as 50 times!!! very annoying as the pop up is in middle of screen & won't go away unless i click it. Thank you foray help!

Contact the providers technical support staff.
Ciao.

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

How to handle the table control in bapi?

how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan Pandurangan

BAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta

Printer Information from the pop-up screen

Hi,
On the SAP screen I work, we have an option to print (button called) "print form".
When clicking on this button, a pop-up screen is displayed to select the print devices and then
option print the list of documents displayed on that screen.
How do I get the information as which printer is selected on this pop-up screen ?
Also,
It would be helpful, if some one would tell me how to get the status of the printing job.
If there was an error while printing or is it successfull ?
Regards,
Vijaya

Go to SYSTEM --> SPOOL REQUESTS and you will find all the print jobs and also their status.
The printer that gets selected in the pop-up screen can be because of the default printer for that user or because of some condition record.
Default Printer :
Go to SYSTEM --> USER PROFILE --> OWN DATA , in the screen that appears click on ATTRIBUTES tab. There is a Output device field. The printer appearing here is the default printer.
hope it was useful.

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

Supression of progam attribute title getting printed in the POP up screen

Hi,
I am calling a screen (module dialog box type) in the module pool progam and than on that screen i am generating a list out displaying messages.
When the screen is getting called the main program attribute tittle is gettting displayed before printing the messages.
Please provide your suggestions regarding how to supress that attribute title getting displayed on the pop up screen.
The code in the PBO of the pop up screen is
PROCESS BEFORE OUTPUT.
MODULE status_9120.
MODULE WRITE_LIST_9120.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_9120.
setting the PF status
MODULE status_9120 OUTPUT.
SET PF-STATUS 'Z9120'.
SET TITLEBAR 'TITLE_9110'.
ENDMODULE.                 " STATUS_9120 OUTPUT
*&      Module WRITE_LIST_9120 OUTPUT
To display the error messages on the pop up screen
MODULE WRITE_LIST_9120 output.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING." AND RETURN TO SCREEN 0.
   l_dynnr = SY-DYNNR.
   FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
   LOOP AT t_result.
   WRITE:/ t_result-message.
   ENDLOOP.
ENDMODULE.                 " WRITE_LIST_9120 OUTPUT
MODULE USER_COMMAND_9120.
As mentioned above before displaying the contents of the table t_result the code is displaying the progam attribute title.
Also provide suggestion whether this can be done by any other method.
Thanks,
Mohit

Hi
Once you have set a title, it remains active within the transaction until the next SET TITLEBAR statement.
Use SET TITLEBAR. (without any title. This will reset the title)
Regards
Raj

The green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook

How to remove the pop-up window ''Wireless Radio Status" for t430s

Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!

I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How to run the query in screen painter

i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhav

Hope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana.

How to handle the pop-up Screen in LSMW - Recording

Similar Messages

Maybe you are looking for