How to handle the shared LIVE stream on Facebook that already became a VOD streaming file?

Hi all,
I can share a embedded MP4 file on Facebook with facebook OG tag so that people can view the video with inline video player.
Streaming from FMS 4.5, the embedded LIVE streaming link can be http://<mydomain>/VideoID.f4m
When internet user viewing/sharing the same link on their facebook, the view the link stream as well.
When the LIVE event has been completed, the recorded MP4 file would be work as VOD streaming, link like http://<mydomain>/hds-vod/VideoID.f4m
The problem is that when people click on the previously shared link on facebook, the embedded link is the "http://<mydomain>/VideoID.f4m" that do not exist.
How can i redirect the f4m to the VOD f4m address? Thanks.

You could use the Flash server Administrator API getLiveStreams() and read the xml the server throws you with actionscript on your flash
http://localhost:1111/admin/getLiveStreams?auser=username&apswd=password&appInst=application
http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 33e-7ff8.html
I would thow something like this.
<result>
<level>status</level>
<code>NetConnection.Call.Success</code>
<timestamp>7/13/2011 10:52:05 AM</timestamp>
<name>_defaultRoot_:_defaultVHost_:::_1</name>
<data>
<_0>live1</_0>
<_1>live2</_1>
</data>
</result>
Then read the data node and get the number of streams. use some actionscript if data# >= 100
then trace a message.
I haven't tried this. but i think is posible.

Similar Messages

How to permanently disable the Shared Photo Stream on a windows pc

I've got the Icloud control panel installed on a windows7 pc. On this specific pc I only want My Photostream running. I've tried to disable the Shared Photo Stream - but when I log off my windows user account an then log in again, the checkmark next to the Shared photo Stream is back, and iCloud starts again downloading the shared stream. How can I stop this behavior? I want to permanently disable the Shared Photo Stream.

Try this method of duplication:
<font "size=+1">Duplicate a CD or DVD
1. Insert the DVD/CD;
2. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
3. from the DU File menu select New | Disk Image from Disk 1;
4. Choose to format the disk image as DVD/CD Master, name the disk image and click Save;
5. When the .cdr file is finished select it with mouse and press COMMAND-I to open the Get Info and check the box to lock the file;
6. Choose the .cdr file from the left side list, click Burn, and insert a new, blank DVD or CD.

2 weeks trying to find out how to use the media live encoder in multi stream. And I can not find an

2 weeks trying to find out how to use the media live encoder 3.2 in multi
stream. And I can not find any clear instructions guide. Please from
my soul, taught me clearly, how I can stream to 2 different site
using live media encoder. what I do with ftml values and the other
one , wich everyone site give me, where should I put them, in what
order ... everything I tried, I got an error. I realy please you,
please !!!! thanks in advance !!

[Moved to Flash Media Live Encoder forum.]

Photo stream is showing up in iphoto recent but not web and I am not able to join the shared photo stream. all of my software is updated. can someone tell me how to get photo stream in the web source list? thanks!

Can someone help me get Photo Stream to appear under Web in the iPhoto Source List? I have updated all my software. iPhoto 11, Mac OS X 10.7.5 All of my preferences are checked. I am able to see the shared Photo Stream on my iPad, but not my Mac. The Mac iPhoto photos from the shared photo stream are appearing in the Photo Stream (under Recent), but I thought they would appear as a shared Photo Stream in its own file/album (like on the iPad and iPhone) - labeled with the shared Photo Stream's title. Is this supposed to happen on the Mac? Thanks!

So you are saying for it to do what i want: shared photo stream to appear in web then i need to upgrade.
Yes
Does that mean i purchase the new software an it's not just an update?
Yes
Your profile indicates your running 10.7.5. For shared Photo Streams you need to be running 10.8.2 or later: The following is from iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software: iPhone, iPad, or iPod touch with iOS 6.0 or later Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
So you'll need to upgrade to Mt. Lion.
iPhoto requirements are free updates for iPhoto '11
LN

HT201077 Can I share all my photos with my wife without having to constantly add photos to the shared photo stream?

My family has an imac where we have a family photo library in iphoto. The iphoto library is under my wife's profile. My wife and I each have an iphone 4S. I'd like all the photos my wife and I take on our iphones to automatically upload to the iphoto library on my wife's imac account. I've tried a few different ways of doing this and none of them are ideal.
My current solution works, but has some unwanted side effects. Currently, my wife and I use the same main icloud account on our iphones. This would be the perfect solution if it didn't take up the same icloud storage (among other issues).
It'd be nice if you could have 2 photo streams linked to the same iphoto library on a mac. This way both my wife's photo stream and my photo stream would downloand to the same iphoto library. It doesn't appear that iphoto for mac allows this.
I realize I could do this the old fashioned way (outside of photo stream). But, it seems as though there should be a solution that works automatically.
Could there be a solution creating a shared photo stream on my iphone and sharing this photo stream with my wife? I've looked into this but can't see how it would work automatically. It looks like you have to manually add photos to a shared photo stream. I'd like the shared photo stream to update itself to include all photos I take.
Does anybody have a simple solution for this problem?

There is not (yet) an easy solution to use an an iPhoto library with two separate My Photo streams.
It might be easier to take the family photo library out of your wife's account and move it to a shared location, so boh of you can maintain it, see:
iPhoto: Sharing libraries among multiple users
This way, both of you could download automatically to My Photo Straem and your private iPhoto Libary, remove the worst pictures, and then export only the best shots to the shared library. This will make the shared library smaller and at the same time create a backup of the best pictures, and it will ensure that your family will never see a potentially embarrassing photo. Sharing My Photo Stream is really dangerous, because each and any picture you take will be added the PhotoStream, before you can delete it.
As you may have seen at Apple's WWDC keynote presentation the new MacOS X Maverick will bring more sharing options for Photo Streams: Watch the keynote
You may want to wait for the next software generation before doing any major reorgansition.
Regards
Léonie

How to handle the contents of a carousel

Hi,all
Now I have a trouble in how to handle the contents of a carousel.
I use codes below:
          locator=(PMTElementaryStream es).getDvbLocator();
          serviceDomain.attach(locator);
          dsmccObject=new DSMCCObject(serviceDomain.getMountPoint().toString());
          file=new File(serviceDomain.getMountPoint().toString());
          content= file.list();
to get some file or directories, such as *.png, *.class, *.mpg, xml, MHPdataloader, sport, and so on.
How can I do for next procedure.
Thank you.

What do you want to do next? You can create a DSMCCObject that refers to one of the files in your carousel, and use this to control the loading and caching of that file. To actually read a file, however, you will need to create a FileInputStream or RandomAccessFile that refers to that file. You can then use this like any other file access.
This may help you:
// create a new ServiceDomain object to represent
// the carousel we will use
ServiceDomain carousel = new ServiceDomain();
// now create a Locator that refers to the service
// that contains our carousel
org.davic.net.Locator locator;
locator = new org.davic.net.Locator
("dvb://123.456.789");
// finally, attach the carousel to the ServiceDomain
// object (i.e. mount it) so that we can actually
// access the carousel. In this case, we don't specify
// the stream containing the carousel in the locator, so
// we pass in the carousel ID as part of the attach
// request
carousel.attach(locator, 1);
// we have to create our DSMCCObject with an absolute
// path name, which means we need to get the mount point
// for the service domain
DSMCCObject dsmccObj;
dsmccObj = new DSMCCObject(carousel.getMountPoint(),
"graphics/image1.jpg");
// now we create a FileInputStream instance to access
// our DSM-CC object. Alternatively, we could create
// a RandomAccessFile instance if we wanted random
// instead of sequential access to the file.
FileInputStream inputStream;
inputStream = new FileInputStream(dsmccObj);
// we can now use the FileInputStream just like any
// other FileInputStream

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

How to handle the table control in bapi?

how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan Pandurangan

BAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta

How to handle the #error in ssrs expression

hi
Please any one help me to resolve this #error ,
I have a calculated filed in that expression i given a if condition like below
data of column is coming like this 0 , 0.0
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/( Fields!Column1.Value)))
how to handle the #error
Please let me know any one

Hi deepuk23,
According to your description, when you use the IIF() function in the report you got some error,right?
The issue can be caused by the column1 and column2 have different datatype, I assumed that one is integer and another is float, when the Column1 is 0 or null, because IIF() function always evaluates both the true part and the false part, even
though it returns only one of them, it will throw out the error.
To resolve the issue, you should use a nested IIF() function to avoid the zero-divisor in any rate like below:
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/(IIF(Fields!Column1.Value=0,1,Fields!Column1.Value))))
For more information, please refer to this article:
FAQ: Why does the “Attempted to divide by zero” error still happen?
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to handle the errors in transformations

Hi
I am using SOA, JDev 10.1.3.3.
How to handle the exceptions in transformations.
If any thing goes wrong in transformation then how to handle that situation.
I am not getting any kind of instances like errored out..
Please help me out
Regards
Pavankumar

I think your issue is that your process is going into manual recovery.
In the console click on the tab BPEL processes. There is a link on the left for manual recovery. Do you see your processes there?
What happens if you put your transformation into a scope. The in that scope you have a catch All. In this catch All routine just do a terminate. This will error your process but you should see it appear in the console.
cheers
James

How to handle the shared LIVE stream on Facebook that already became a VOD streaming file?

Similar Messages

Maybe you are looking for