How to have multiple inputs for a Pic Ring?

Alright, I've got this program in which there is a pic ring with multiple pictures on a tab page on the Front Panel. And on the Block Diagram the Pic Ring receives a number through a numeric indicator. There are multiple boolean variables set up and depending on which one is true that dictates which number the indicator pushes on to the Pic Ring. However, I can only connect one boolean up to the indicator at a time. If I connect mutliple wires to the indicator the wires become broken immediately. I have a screen shot depicting the setup in the Block Diagram.
Anyway, my question is basically how to setup a numeric indicator for a Pic Ring to have multiple inputs?
Attachments:
PicRing Multiple Inputs.jpg ‏319 KB

Shogun,
You will probably need some sort of case structure to determine your input.
It looks to me like you are searching a common string for whether it contains Valve1, Valve2, Valve3 and so on. Depending on which one it finds you are outputting that picture. I would need more information as to what exactly you were doing, but I might look in the string for "Valve" then a number and feed that output into a case structure. For instance if you find Valve3 in the string you send the input corresponding to Valve3 into the picture ring
Matt J
Professional Googler and Kudo Addict
National Instruments

Similar Messages

How to have multiple orders for a single contract

Hi all, my question is:
How to have multiple orders with respect to a contract which is valid for many years? The orders are given periodically over the lifetime of the contract. Once the order is given, the order quantity needs to be confirmed and then the order needs to be billed.
Thanks in advance.

Hi Bappaditya,
To get multiple orders from a contract, you can either create an order as a follow up document from the contract
Or
Maintain the contract determination settings.
In such a case, everytime you create an order the contract determination happens, for the particular business partner and product.
For this to happen you need to maintain the customizing settings:
1. Copy Control between contract and order
2. Contract determination setting in the order transaction type
The qunatity confirmation can be done by standard setting at itme category level.i.e. If the quantity is more than that stated in the contract an error is raised.
For billing of order you will have to maintain the billing setings like billing type, biliing item category, billing item determination.
Hence every time your order is created it comes in the billind due list from where you can create the blling document.
Wish the information is helpful.
Regards,
Shalini Chauhan

How to have Multiple Configurations for a Flex Application

Hi All,
I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
How can something like this be achieved in FLEX?
Many thanks!
-Mike

Maybe my setup is unconventional, I doubt it, though:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
Now, using ANT, the scenario would look like this:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Code is good and developer checks it back into SVN.
4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
I am using PHPUnderControl as my build server for PHP.
I am also unclear as to how my goal could be achieved using ANT?
Thanks!
Mike

How I have multiple KPIs for the same measure?

Hi there,
I am finishing up a PowerPivot data model which gathers information from a service desk system, and different customers have different SLA targets.
I know I can specify a KPI for each measure that I create. However is there a way to specify multiple KPIs the same measure, or any other way/workaround that can meet the requirement outlined above?
Thanks in advance for the help.
Regards,
P.

Hi pmdci,
According to your description, you want to specify different target for different customer when creating KPI based on same measure. Right?
In PowerPivot, when we create a KPI, we can only specify calculated field or absolute value as target. We can't put any expression or function to specify a dynamic value as target value. Based on my knowledge, this requirement can be achieved in Reporting
Services. We just need to create a Variable and use Switch() function in expression to set specific values for different users. In this scenario, it seems can't be achieved in PowerPivot currently. I suggest you post this thread on PowerPivot forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlkjpowerpivotforexcel
You may get some more effective advice there.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How can I have multiple inputs into the selector terminal of a case structure

Hi everyone
I have a question on how to wire multiple inputs in to the selector terminal of a case structure.
Currently, I have three switches, each switch determines different case. So if I switch the switch 1 is on, the numeric indicator will show 1. If the switch 2 is on, the numeric indicator will show 2, so on and so forth. However, the selector terminal will not allow me to wire multiply inputs into the case structure, I tried Bundle by Name, Bundle and Array to Cluster, but they did not work. I set the case structure with 3 cases, they are 1, 2 and 3.
Could someone help me please. I have attach an image and the VI of the work I did so far.
I have another question, is there a function which can toggle other switches to off when there is a switch has been toggled on.
Thank you very much
Tommy
Attachments:
Trial - Case Structure.vi ‏7 KB

Tommy, attached find a cheeseball way of doing this that has given me a LOT of mileage over the years. IT lends itself nicely to a couple of really good practices that NI recommend, but I have given you the bare-bones to "see under the hood".
The recommended practices:
1. You can make this a nice tight sub-vi where you can put it into a core library of routines that you'll use over the years, even extending the logic to look only for changes, etc.
2. If you are thinking about Front Panel design considerations, you'll want to use arrays of controls where possible, as that's a nice neat way of containerizing your switch for both the FP and Block Diagram.
Have fun. I have TONS of these types of things, so feel free to PM me if you have any other needs.
Wes
Wes Ramm, Cyth UK
CLD, CPLI
Attachments:
Boolean Switch Logic.vi ‏11 KB

How to Enter multiple inputs at a time in Form or Table

Hi,
I have one doubt in Webdynpro with java. How to enter multiple inputs at a time?
For Exam My requirement is we will take employee details node under node empid, name, sal etc some attributes is here
Client asking like this enter multiple inputs at a time that data will saved in ECC System.
1.     By using form how can enter enter multiple inputs at a time I donu2019t this so I will take table(here I will select input fileds). If any possible in form also tell me how I can enter multiple inputs at a time.
In table suppose 6 rows available So He will enter
                         empid, name, sal ,firstname, last Name
                         empid, name, sal ,firstname, last Name
                         empid, name, sal ,firstname, last Name
Like 6 time Click Submit. That data will save in ECC.
So I was taken table. But in that Table only first row will be editable. I want all 6 will editable that time he will put data in rows then click on submit.
How to editable these remaining rows? if u have any documents pls send me.
Regards
Vijay Kalluri

Dear Vijay,
To enter multiple inputs in a table and to make the other rows editable you have to provide that node with initial values.
by initial values I mean you have to make that much space in your table node.
For example the name of Node is yourNode & you have empid, name, sal ,firstname, last Name
attributes in that node, and you have to make 6 rows editable.
Then, simply write this code in you wdDoinit() method of your view controller.
IPrivateYourView.IYourNodeElement e ;
for(int i = 0 ; i < 6 ; i++ )
e = wdContext.nodeYourNode().createYourNodeElement();
e.setAttributeValue("empid" , "") ;
e.setAttributeValue("name" , "") ;
e.setAttributeValue("sal" , "") ;
e.setAttributeValue("firstname" , "") ;
e.setAttributeValue("lastname" , "") ;
wdContext.nodeOverTimeEnty().addElement(e) ;
Change YourView with your view name & YourNode with your node name.
If you have any problem in doing this you can revert back.
Hope it helps!!
Warm Regards
Upendra Agrawal

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

Can we have multiple transports for the same object.

Hi guys,
Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
Thanks

Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
Only after releasing the tr you can create a new tr on the same object.
Message was edited by:
Abhishek Jolly

How to lock multiple user for a transcation code at same time is der any tc

how to lock multiple user for a transcation code at same time is der any tc
suppose i hav 15 user and i want to lock 10 user for mm02 who can i to it

Basis can do a export and import transport, still if don't have connection between boxes.
or
check this
http://www.sap-basis-abap.com/abap/copy-program-variants-from-one-to-another.htm
a®

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

More everything. I have one line coming up on the 19th of this month and I'd like to transfer to another user with a later upgrade date. Just not seeing the option anywhere.

Can we have multiple policies for the same gateway?

Hi all,
Is there a way in which we can have multiple policies for the default gateway?
When I try adding a new gateway (which is not mentioned in the installer.properties file) and have policies, there is a 404 error.
When I add another service to the same gateway, I get an error - that the service could not be added to default policy.
Help me please...
My need is as follows
Want to have multiple policies, so that each of the web-service can be attached to same. The relation needs to be one-to-many. One policy can have multiple web-services.
Thanks in advance...

Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
Only after releasing the tr you can create a new tr on the same object.
Message was edited by:
Abhishek Jolly

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

Events cannot have multiple exceptions for the same date

I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

How to have multiple inputs for a Pic Ring?

Similar Messages

Maybe you are looking for