How to hide columns in each page of SSRS report for grouped tablix

Hello all,
I have a requirement like when SSRS report (used row grouping)is exported to EXCEL
1) Each report page should be exported to a separate excel sheet
2) Each sheet will have different columns (that is some columns will hide in sheet2, sheet3...)
3) Eg: If a country report is there with details like country name, country code, currency code. Now each country details should export to separate excel sheet and sheet 1 should show Country Name and Country code; Sheet2 should show: Country Code, Currency
Code; Sheet3 should show: Country Name, Country Code, Currency Code.
I am done with point#1 above: Each report page should be exported to a separate excel sheet. Can some one help on point#2:Each sheet will have different columns (that is some columns will hide in sheet2, sheet3...)
Thanks,
Paandey : Dont forget to mark it as Answered if found useful

Hi paandey,
According to your description, there are three columns named country name, country code, currency code in the report. When export the report to excel, you want to show Country Name and Country code in sheet1, Country Code and Currency Code in sheet2, and
show all of the three columns in sheet3.
In Reporting Services, we couldn’t achieve your goal by setting visibility of columns in one tablix. As a workaround, we can use three tablix in the report, then add page break to the tablix. For detail information, please refer to the following steps:
1. Since you have created a tablix with three column, copy and paste it to the report twice.
2. Right-click column handle of Currency code in tablix1, click Column Visibility.
3. Check Show or hide based on an expression, click (fx) button, then type the expression:
=(Globals!RenderFormat.Name = “EXCELOPENXML”)
4. Right-click column handle of Country name in tablix2, set its visibility like step3 above.
5. Select and right-click tablix2, click Tablix Properties.
6. In General pane, in Page Break Options section, check Add a page break before check box.
7. Click Visibility in left pane, check Show or hide based on an expression, click (fx) button, then type the expression:
=(Globals!RenderFormat.Name <> “EXCELOPENXML”)
8. Select and right-click tablix3, add page break to it like step6 above.
9. Set its visibility like step7 above.
The following screenshot is for your reference:
For more information, please refer to the following document:
http://blogs.msdn.com/b/robertbruckner/archive/2010/05/16/report-design-naming-excel-worksheets.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

Similar Messages

How to hide particular data on rows in ssrs reports ?

Hi,
i have requirement, in my ssrs report i have columns like sites,Accounts,LOBs and etc.,
i don't want to show some of the accounts in rows for some particular sites, please check the below image.here i don't want to show the ally finacial and fox tel accounts in the report, and even client don't want to add accounts to the filters.
please help me with this issue,how to not show those particular accounts for particular sites in the report.
*here we are building reports on cube.
Thanks in advance,
Naveen

I think I would create an internal multivalue parameter with the default values set to the accounts you wish to exclude... call it ExcludeAccts. Then use this parameter to filter out these accounts in the dataset, not the report. I am not an MDX guy but
in Transact-SQL the filter would be:
WHERE Account NOT IN (@ExcludeAccts)
This will return all accounts except for those explicitly excluded in your parameter. The reason I would use a parameter is maintenance. Once the appropriate equivalent statement is added to your MDX, you just need to update the parameter default values
to change the exclusions rather than editing the MDX each time.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How to Print the Report Column headers on each page of any report

Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
I read a thread with a similar request but the answer seems vague for my level of understanding.
I am connected to a print server and using BI Publisher.
Thanks,
Ric

Hello Ric,
>> These reports will be printed using Excel and Word.
I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
Regards,
Arie.

I am trying to get a footnote repeated on each page of a report- it only appears on first page - how do I make it appear on each page please?

How do I get the same footnote to appear on each page of a report - it only shows on the first page?? I went in through View and Layout per instructions. Thanks.

Hard to tell w/out knowing exactly which application and version you are drafting this report in. Often the footer on the first page is distinct from the footers of the second page through end - quick fix: add the footer to the second page and you should then be able to format it to continue on through the end of the report.

How to remove the thick line at the end of each page of my report

Please how do I remove the thick line that appears at the end of each page of my report anytime I publish the report unto the Web.

Bring up the property inspector against the report object. In here you will see the settings for HTML output. Remove the entry against the "After Page Value" property.

Showing selected parameters values on each page in SSRS

Hi All,
I have a SSRS report with multi-selection parameter..Basically it's a summary report of sales and based on country parameter I have to show data.
let say Country is the parameter and below are the values of the Country parameter list...
Parameters list:
All
Australia
England
Canada
Italy
Parameter: All
1) If I select 'All' in the parameter list then
In 1st page I should see data related to Australia and display parameter value as Australia in the left side top corner of the report.   In 2nd page I should see data related to England and display parameter value as England in the left side top
corner of the report.   In 3rd page I should see data related to Canada and display parameter value as Canada in the left side top corner of the report. In 4th page I should see data related to Italy and display parameter value as Italy in
the left side top corner of the report. In 5th page I should see data related to All and display parameter value as All in the left side top corner of the report.
2) If I select Australia and England in the parameter list then
In 1st page I should see data related to Australia and display parameter value
as Australia in the left side top corner of the report.   In 2nd page I should see data related to England and display parameter value as England in the left side top corner of the report.
3) If I select Italy in the parameter list then
In 1st page I should see data related to Italy and display parameter value
as Italy in the left side top corner of the report.
It should look like this..I need help in showing parameters (selected parameter) individually on each page.
Page-1
Parameter: Australia ( how to show Australia on 1st page)
Product
Amount
Country
Prd1
100
Australia
Prd2
200
Australia
Prd3
300
Australia
Prd1
340
Australia
Page-2
Parameter: England ( how to show England on 2nd page)
Product
Amount
Country
Prd4
400
England
Prd1
125
England
Page-3
Parameter: Italy ( how to show Italy on 3rd page)
Product
Amount
Country
Prd2
250
Italy
Prd3
250
Italy
Create Table:
Create Table Sample(
Product varchar(10) Not Null,
Amount Money null,
Country null
Insert Statement:
Insert into sample (Product,Amount,Country) Values ('Prd1',100,'Australia')
Insert into sample (Product,Amount,Country) Values ('Prd2','200,'Australia')
Insert into sample (Product,Amount,Country) Values ('Prd3','300,'Australia')
Insert into sample (Product,Amount,Country) Values ('Prd4','400,'England')
Insert into sample (Product,Amount,Country) Values ('Prd5','480,'Canada')
Insert into sample (Product,Amount,Country) Values ('Prd1','340,'Australia')
Insert into sample (Product,Amount,Country) Values ('Prd3','290,'Canada')
Insert into sample (Product,Amount,Country) Values ('Prd1','125,'England')
Insert into sample (Product,Amount,Country) Values ('Prd2','250,'Italy')
Insert into sample (Product,Amount,Country) Values ('Prd3','250,'Italy')
Thanks in Advance,
RH
sql

Hi sql9,
According to your description, you have a report with a parameter for selecting countries. Now you need to display records for one country and show the country name on each page. Right?
For this requirement, we need to add a parent group (Group on Country) so that we can set page break for each country. Also, we want to display the country name on each page. This country name is group name, not the parameter because the parameter contains
all countries that we have selected. In this scenario, we just need to set the group name as page name, then display the Page Name (Build-in Field) in report header. You case has been tested in our local environment. Here are steps and screenshots for your
reference:
1. Create a table in report. Set detail rows group on Country. Set page break between each group instance.
2. Create a parameter for filtering data. Set Filter on tablix.
3. Go to Row Groups, select group Country. In Tablix Member Properties grid, go to Group->PageName. Put “=Fields!Country.Value” in expression.
4. Create a textbox in report header. Put Page Name (in Build-in Fields) into the textbox.
5. Save and preview. It looks like below:
Reference:
Pagination in Reporting Services (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Email each page of a report to different address

I need to run a hyperion report in PDF and send the output to 100 different emails, now the catch is that each page of the report will have a different store and I need to email a particular page of the report to the appropriate store email. I can just send the whole 100 page report to 100 emails addresses which is not what we want or create 100 reports, one for each store which will retrieve for only one store but then updating 100 reports will be tedious. I think this functionality is not there in HR/Financial Reproting and I've looked at all the options but didn't find anything appropriate for this.
Any thoughts? Thanks for any help.
J Bling

Thanks for reply, earlier what I did is set Store as a Page dimension and that gives me 100 pages with a different store on each page. Now with your suggestion to set Store as user POV and sending each bursting report to different email. I'm not sure how to that automatically? Are you suggesting we manually put in different email for each bursting report? Is there a way to automate this process, I've tried all options in the Batch and Scheduler. BTW we are using reprots v 7.2.
Thanks!

Repeat a Header on each page of a Report that includes expressions - Report Builder 3.0

Is there a way of repeating an header on each page of a report with the built-in expressions representing the new value on each header. Example, Page 1 is correct but page 2 - the permit number, address and Tract does not match up, it repeats all the
information from page 1.

Hi KittyCat101,
According to your description, you want repeat a show with expression to show Permit Number and Address dynamically on each page. Right?
In Reporting Services, table header is not in any group row, so when you put expression with data field into header row, it will only return the first row of that data row. This is the reason why it always shows the information as Page 1.
In this scenario, we can make records group on Permit Number. Then we put the Permit Number and Address in the group header. Set page break between each group instance.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to repeat the column header on each page of the report?

Can any of you please suggest me on how to repeat the column titles on a table if the table extends over several pages:
I tried the below action present in Re: How to make the column title needs to be on each page? It worked fine for the pdf format whereas its not working for rtf format output.
Can anybody help on this?

I guess this has been taken as bug,
may be some patch got released for it..iam not sure..

How to Hide Column

Hello,
How can I hide columns within an AdvancedTable programmatically? Ex. All columns shall be shown if the value of my dept is "Dept1" while only Column1 to 2 shall be shown if my dept is "Dept2"? Pls advise. thanks

As Kumar rightly pointed out, you need to refer the Dev guide for this. Refer the section on Partial Page Rendering.
To summarize you would have the Rendered Property on the columns like this
${oa.<VoName>.<VOAttributeName>}
Based on the conditions you would set the attribute value(which is boolean) to true or false and accordingly either the column with show or hide. The VOName is the name of the Partial View Object you create for the purpose. Do let us know if you have difficulty in understanding PPR.
Regards
Sumit

How to hide preview configurator summary page when launching configurator from iStore

Hi,
We have a requirement to hide preview configuration summary page in iStore whereas it should be visible when launching from other host applications.We tried doing it with help of usage functionality as below.
1) Create a usage with some name say “iStore” in configurator.
2) Take copy of summary with Status region template and add display condition to hide the summary region.
3) Take copy of the model active ui and attach the above template to it.
4) Publish the model with this new copy UI and usage as iStore to the host application.(There will be 2 publications one with this usage and other with normal)
5) Enable the profile CZ:Publication usage at application/responsibility levels for iStore.
With the above approach users are concerned that we need to maintain 2 User Interfaces in Configurator and each time any change has to be done both the user interfaces needs to be changes which will not be a feasible option in case of complex models.We would like to know if there is any other approach to hide this summary page from istore.
We are on R12.1.3 and are using fusion configurator engine.
Any suggestions on customizations/approach will be appreciated.

Create a Dynamic Action:
When
Event: Page Load
Condition: -No Condition -
True Actions
Action: Hide
Selection Type: jQuery Selector
Affected Elements: #t20PageHeader
Condition
Condition Type: Request = Expression 1
Expression 1: CRM

How to hide column of DataGrid

I am making a web part in which I am using System.Web.UI.WebControls.DataGrid control.
It's AutoGenerateColumns property is set to TRUE.
I am trying to hide a column at run time. I have written the following code on this controls ItemCreated event but it only works if I e.Item.Cells[0] and it doesn't work for any other value for e.g. e.Item.Cells[1] and e.Item.Cells[6].
There are 9 columns in my DataGrid control.
Code
protected void grd1_ItemCreated(object sender, DataGridItemEventArgs e)
{ e.Item.Cells[0].Visible = false; //works fine
e.Item.Cells[1].Visible = false; //gives error e.Item.Cells[2].Visible = false; //gives error
Error
Specified argument was out of the range of valid values.
Parameter name: index
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
How to hide a particular column?

Hi Frank,
You can try something similar to the below in 'RowCreated' event Instead
protected void gridView_RowCreated(object sender, GridViewRowEventArgs e)
e.Row.Cells[1].visible =false;
OR I would say hiding column is not something that is to be done at row level, so you can hide columns outside any of the grid view event after binding.
e.g.
gridview1.columns[1].visible=false;
I am using DataGrid control in which there is no RowCreated event.
I have tried second approach but it also doesn't work.

I am creating an I-Web webpage. When I add pages, the only way to navigate throught the pages is with the menu bar on the left. How do I navigate to each page on the actual website?

I am creating a website using i-web. When I add pages, they appear at the top of the webpage, but I cannot navigate to each page in the navigation bar. I can only navigate in the menu bar located on the left side of the program.
How do I navigate thru the website?

You don't unfortunately, iWeb though great does not allow that funtion.
If it is a deal breaker for you I would suggest SandVox or RapidWeaver.
I personal like SandVox
How ever my website is WordPress, you have to understand a little code, but a lot more freedom
LearnFromLee
I may receive some form of compensation, financial or otherwise, from my recommendation or link. <Edited by Host>

How to hide content in my page..

Hello support,
How can i hide my discussions, to be shown in my page, exacting how to hide contents tab in my SCN page so that no one can see my discussions, who visit to my page.
Thanks.

No. You can't hide the content tab from your profile.
I can see you haven't posted any discussion yet. Why you want to hide it ?

How to Bates-label (give each page a number) using Adobe?

Dear reader.
I am a secretary at a law firm. When clients or opposing
party send us files in Adobe, we have to print out these hundereds
of pages of documents. We make labels in Word, print out the labels
and stick them individually on each documents. We call it
Bates-labeling. It is to give each document a number so we know
what case and which number the document is from. For example, in
case where our client is Walter Becker Corp. The label would be
WBC00001 for page one. So my question is, if there is any way I can
have Adobe label it for me?
Thank you!

I figured this out. I had to put my header and lines sections in a table and then specify on the table properties to repeat the header row on each page.

How to hide columns in each page of SSRS report for grouped tablix

Similar Messages

Maybe you are looking for