How to hide fields on Repetitive Area Footer on the last page?

Hello,
How can I avoid printing some fields on the last page, when this fields
are on the Repetitive Area Footer, and the Repetitive Area Footer is
defined to print on all the pages? I was hoping to do this with fileds linked
to (ContinueNextPage) field, but it doesn't work!
Regards,
Júlio Pinho

hI Júlio Pinho,
i think, it is not possible in Repetitive Area Footer on PLD.
but, it is possible in Page Footer on PLD.
IF you dont need print some Fields in Last Page on printout.
Try this,
->> Open the require PLD.
->> Create require Fields in Page Footer.
for example,
=> Create DocTotal Field in Page Footer on PLD.
=> Link to SystemString (ContinueNextPageNotice) Formual FieldID in DocTotal Filed.
Save and Run the Print Preview.
Regards,
Madhan.

Similar Messages

Avoid printing Header and Footer in the last page

Hi,
Could anyone please let me know how to avoid print the header and footer in the last page?
Note: I'm printing RTF template for publishing the output.
Looking forward for your valuable inputs/suggestions.
Thanks in advance,
Regards,
Muru

Hai,
My report got FROM PO & TO PO parameters and i need to print footer only in first page of each PO. Tried with section but now i am getting first page of all PO contionious and then all lines together.
Please call me or sent replies to [email protected]

Displaying Footer on the Last Page of the report

Hi Experts,
We have a requirement to display footer on the last page of the report only.
Could you please guide how to acheive this.
Thanks in Advance,
Cheers,
Andy.

Pls see this Blog.It may help you
http://blogs.oracle.com/xmlpublisher/2007/03/30/
Thx
Rahul

How to print text or field (inside a rep fram)on the last page in report 6i

Hi Everyone,
I want to print the text on the last page.
my text is inside a repetating frame.
as i want to display page no in the filed
and if it is a last page, display page number appended with Last
so it will look like
for 3 pages
on the first page
1
on second page
2
and on last page it should display
3 Last

You cannot know if you are on the last page or not. See this similar thread: Get value of total pages variable
Why not put the page number in the margin like this:
Page 1 of 3
Page 2 of 3
Page 3 of 3
You do that by creating a text field in the margin. Enter this text:
Page &<PhysicalPageNumber> of &<TotalPhysicalPages>

How do I stop firefox from trying to load the last page after a reboot?

Occasionally a page will "hang" and I'll use task manager to shut it down, but sometimes it is due to a spyware program. I do not want the page to reload after restarting Firefox... how do I set it to stop trying to reload pages?

Set the pref [http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes browser.sessionstore.max_resumed_crashes] to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

How do I get Safari 8 to open to the last page?

With OS X Mavericks and Safari 7, I could have multiple tabs open with active pages and click the 'X' to close the window and then reopen later and all tabs/pages would still be there. Now with Yosemite and Safari 8, every time I close the window and reopen, it goes back to the Favorites window. I have 'Safari opens with: All windows from last session' selected. Any ideas? This was a clean install.

Hi Barry,
the view scale bug was on the list for an early fix
Fixed in the latest update (Numbers 3.0.1)
Numbers > Preferences > General > Default Zoom:
And it sticks with a document after Save . Reopen shows the Saved view.
Regards,
Ian.

Want to hide a field in the last page of report

Hi All
I have an issue .. can anyone of the oracle techies give me a solution for this ..? pleeaassee
The issue is that let us say i have a report for 5 pages. I have placed a field on the margin of a report to display CONTINUE.. . Now we dont want this field to be displayed when the report is on the last page. We tried of setting property of the field Print on to All but last page but it is not accepting that
can anybody provide a solution for that ..?
Thanx in advance
Hari

The problem you're hitting is that the margin area is formatted before the body area in the report. Since this is the case, you don't know if you are on the last page since the body has yet to be printed when you print your "continue" column.
There are a several ways to accomplish what you want:
- Guess whether it is the last page and print based on your "guess"
Normally you'd use a running count along with a total count to see if you've printed the last instance of the repeating frame and are hence on the last page. Since your object is in the margin rather than the body, you'd need to estimate how many records will fit on the page and if there are less then these many records left then you shouldn't print the "continue" field.
This can be tricky to do if your frame is variable sized so you don't really know how many instances of the repeating frame will be on each page.
- Place the "continue" field in the body rather than the margin
To do this, you need to create a fixed sized frame that all your normal layout goes into. This should be sized to your typical page size. Then create the "continue" field after the fixed sized frame (you may need to re-size the body area - do this in "margin" mode). Set the print condition to "all pages" against the "continue" field so that it prints on every page. You can then use the running count/total count method to determine if the last repeating frame has been printed when you come to print your "continue" field.

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

Modify screen in VA41 : How to hide field in userexit_field_modification

Hello,
How to hide field at item level only (User should not be able to edit this field) in userexit_field_modification, instead of hiding the complete column.
If I use
FORM USEREXIT_FIELD_MODIFICATION.
IF screen-name = 'RV45A-MABNR'. " Material
SCREEN-required = 0.
ENDIF.
ENDFORM
the complete material column will be greyed out. I want to grey out only for some items.
Thanks,
AP

Hi AP,
You havent given MODIFY SCREEN after screen-required = 0.
Please try it abd check.
FORM USEREXIT_FIELD_MODIFICATION.
IF screen-name = 'RV45A-MABNR'. " Material
SCREEN-required = 0.
MODIFY SCREEN.
ENDIF.
ENDFORM
Regards,
Pawan

How to get footer only in last page of report

anybody tell me
1).how to get footer only in last page while we are displaying reports
 and header only in first page .
2) how to create search help and how to use it .
3) how to create lock objects and how can we use it

Hi
This posting has an example of using a splitter container:
Changing width of a custom container dynamically
This posting has a discussion about using TOP-OF-PAGE:
Display Page numbers in ALV
This posting has an example of using picture control:
Insert picture in selection screen.
This posting has an example of putting a picture on top of an ALV grid:
Logo in OO ALV Grid
The page footer is defined using the statement END-OF-PAGE.
The processing block following END-OF-PAGE is processed only if you reserve lines for the footer in the LINE-COUNT option of the REPORT statement.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
Creating Search Help:
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_imp.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
A lock object is a virtual link of several SAP tables which is used to synchronize simultaneous access by two users to the same set of data ( SAP lock concept).
Locks are requested and released in the programming of online transactions by calling certain function modules which are automatically generated from the definition of the lock objects. These lock objects must be explicitly created in the ABAP Dictionary.
To set locks, you must perform the following steps:
1. You must define a lock object in the ABAP Dictionary. The name of the lock object should begin with E.
2. The function modules for requesting and releasing locks which are created automatically when the lock object is activated must be linked to the programming of the relevant online transactions.
Reasons for Setting Locks
Suppose a travel agent want to book a flight. The customer wants to fly to a particular city with a certain airline on a certain day. The booking must only be possible if there are still free places on the flight. To avoid the possibility of overbooking, the database entry corresponding to the flight must be locked against access from other transactions. This ensures that one user can find out the number of free places, make the booking, and change the number of free places without the data being changed in the meantime by another transaction.
Lock Mechanisms in the Database System
The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
SAP Locks
To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary. A lock object definition contains the database tables and their key fields on the basis of which you want to set a lock. When you create a lock object, the system automatically generates two function modules with the names ENQUEUE_<lock object name> and DEQUEUE_<lock object name> . You can then set and release SAP locks in your ABAP program by calling these function modules in a CALL FUNCTION statement.
Lock Types
There are two types of lock in the R/3 System:

Shared lock
Shared locks (or read locks) allow you to prevent data from being changed while you are reading it. They prevent other programs from setting an exclusive lock (write lock) to change the object. It does not, however, prevent other programs from setting further read locks.
Exclusive lock
Exclusive locks (or write locks) allow you to prevent data from being changed while you are changing it yourself. An exclusive lock, as its name suggests, locks an application object for exclusive use by the program that sets it. No other program can then set either a shared lock or an exclusive lock for the same application object.
example uses the lock object ESFLIGHT and its function modules ENQUEUE_ESFLIGHT and DEQUEUE_ESFLIGHT to lock and unlock the object.
For more information about creating lock objects and the corresponding function modules, refer to the Lock objects section of the ABAP Dictionary documentation.
The PAI processing for screen 100 in this transaction processes the user input and prepares for the requested action (Change or Display). If the user chooses Change, the program locks the relevant database object by calling the corresponding ENQUEUE function.
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
 WHEN 'SHOW'....
 WHEN 'CHNG'.
* <...Authority-check and other code...>
 CALL FUNCTION 'ENQUEUE_ESFLIGHT'
EXPORTING
MANDT = SY-MANDT
CARRID = SPFLI-CARRID
CONNID = SPFLI-CONNID
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID
TYPE 'E'
NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
The ENQUEUE function module can trigger the following exceptions:
FOREIGN_LOCK determines whether a conflicting lock already exists. The system variable SY-MSGV1 contains the name of the user that owns the lock.
The SYSTEM_FAILURE exception is triggered if the enqueue server is unable to set the lock for technical reasons.
At the end of a transaction, the locks are released automatically. However, there are exceptions if you have called update routines within the transaction. You can release a lock explicitly by calling the corresponding DEQUEUE module. As the programmer, you must decide for yourself the point at which it makes most sense to release the locks (for example, to make the data available to other transactions).
If you need to use the DEQUEUE function module call several times in a program, it makes good sense to write it in a subroutine, which you then call as required.
The subroutine UNLOCK_FLIGHT calls the DEQUEUE function module for the lock object ESFLIGHT:
FORM UNLOCK_FLIGHT.
 CALL FUNCTION 'DEQUEUE_ESFLIGHT'
 EXPORTING
 MANDT = SY-MANDT
 CARRID = SPFLI-CARRID
 CONNID = SPFLI-CONNID
 EXCEPTIONS
 OTHERS = 1.
 SET SCREEN 100.
ENDFORM.
You might use this for the BACK and EXIT functions in a PAI module for screen 200 in this example transaction. In the program, the system checks whether the user leaves the screen without having saved his or her changes. If so, the PROMPT_AND_SAVE routine sends a reminder, and gives the user the opportunity to save the changes. The flight can be unlocked by calling the UNLOCK_FLIGHT subroutine.
MODULE USER_COMMAND_0200 INPUT.
CASE OK_CODE.
 WHEN 'SAVE'....
 WHEN 'EXIT'.
 CLEAR OK_CODE.
 IF OLD_SPFLI NE SPFLI.
 PERFORM PROMPT_AND_SAVE.
 ENDIF.
 PERFORM UNLOCK_FLIGHT.
 LEAVE TO SCREEN 0.
 WHEN 'BACK'....

Another Example :
please see this link with Screen shot .....
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/frameset.htm
Reward all helpfull answers
Regards
Pavan

0 down vote favorite share [fb] share [tw] How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard. Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
Any clues will help a lot.
Thanks.

You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

Suppress a field in the page footer unless it's the last page of the group

Hi,
I have a report set up where one can pull invoice information. There is a page footer used for every page which contains a field that I only want visible when it is the last page of the group.
For example, one might pull several invoices, each invoice being its own group. A field would be suppressed in the footer unless it is the last page of that particular invoice.
Is this something that can be done in Crystal Reports XI?
Thank you.

Hi,
Alright, it's a bit rusty but here's how you can do it:
1) Create this formula and place it in the Report Header:
whileprintingrecords;
numbervar n1 := groupnumber;
2) Create this formula and place it in the Group Footer:
whileprintingrecords;
numbervar n := groupnumber;
3) Create this formula and place it on the Page Footer:
whileprintingrecords;
numbervar n;
4) Right-click the above formula (Formula on the Page Footer) and select Format Field > Common tab > click the formula button beside 'Suppress' and use this formula:
numbervar n1;
numbervar x;
if currentfieldvalue <> n1 then
x := 1;
true;
else
x := 0;
true;
5) Right-click the field that you wish to always suppress except on the last page and select Format Field > Common tab > click the formula button beside 'Suppress' and use this formula:
numbervar x;
if x = 1 then true;
Let me know how this goes!
-Abhilash

HT4914 How can you tell which songs are downloaded from the cloud on an ipad

How can you tell which songs are downloaded on the iPad from the cloud?

I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

How to get the range of a textbox in the footer of the 1st page ?

Just like the problem says, how do I use VBA to get the range of the textbox in the footer of the 1st page?

getCellRect(...);

How to hide fields on Repetitive Area Footer on the last page?

Similar Messages

Maybe you are looking for