How to hide one of the unions from the results?

Hi all,
I have a graph which contains 5 unions. The top query is used to pass the functions and the other 4 are the ones that really doing the caclutaions. Is there any way to hid one query from results?
Thanks in advance.

Hiding based on what? If it is a prompt, assign a presentation variable and add a condition to the filter of your desirable result-set in a structure like:
CASE WHEN '@{myPresentationVariable}{DefaultValue}' = 'WhateverValueIWant' THEN 1 ELSE 0 END = 1

Similar Messages

How to hide one of the two Multi level categorization blocks in SRVR?

Hi
I am trying to hide one of the multilevel categorization blocks in SRVR(SERVICE request)
Can it be done by configuration in BSP workbench. If yes then how? I went to the view but I am not able to remove the block
Please help.
Thanks
Tarang

Go to BSP_WD_CMPWB and create a new view by copying existing and remove the 2nd category block.
This can also be done directly from webui.
Regards
Surya

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

How to HIDE one data field in BEx???

Hi all,
I tried to HIDE one CHAR's value from report but no matter what I did. It still shows in the report. Need advice, please.
<b>EX: In the FILTER, I drag & drop 'product ID' to filter section and assign certain' value' under it and then run the query. It shows 'product ID with those values I assigned in the report.</b> I need to remove them from the report. How? (I already personized my variant so it won't show in the selection screen)
Thank you
J.

Hi all,
Thank you for all informaiton. Here is an example for my scenario: I need to put Product ID in the FILTER section and 'restrict' the value- #112, #113 (ie: my sales report will be only for these two products). <b>This report is for products-#112,#113 only so my client doesn't want to see one row show: Product ID: #112, #113 in the report.</b> Any advice that I can avoid this row? I used 'no display' but it is still there.
J.

How to hide 'catalog','open',home' link from dashboard page in obiee11g ?

Hi,
how to hide 'catalog','open',home' link from dashboard page in obiee11g based one users/groups.
http://imageshare.web.id/images/e7tosu6qtsa9zdl1a8w8.jpg
i.e: some users shold not able to see 'open','catalog',home link from dashboard but some power user/groups can able to see the 'open','catalog',home link.
Thanks
Deva

Hi,
I don't want to remove totally, what i am asking is there any
Possibility to do users/groups wise,
E.x:
Work around home page
Setting home page each users/groups wise . I am expecting like that option to
Do open and catalog link.
Home link not a priority .
http://obieeelegant.blogspot.com/2011/06/how-to-changing-theobiee11g-homepage.html
Thank
Deva
http://obieeelegant.blogspot.com

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How to hide Print and Filter option from dynamic ALV

Hi,
I have created the dynamic ALV. now User don't wan't Filter , export,print Option on the ALV dispaly.
Could you please tell me How to hide Print and Filter option from dynamic ALV.
Thanks and regards
Amita.

Hi,
Please go through the following link to get an better idea on ALV.
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9&overridelayout=true]
This is the code which you have to write in WDDOINIT
DATA LO_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
LO_CMP_USAGE =   WD_THIS->WD_CPUSE_ALV_TEST( ).
IF LO_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LO_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
DATA LO_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
      LO_INTERFACECONTROLLER =   WD_THIS->WD_CPIFC_ALV_TEST( ).
        DATA LO_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
        LO_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_EXPORT_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_PDF_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( abap_false ).

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

You have to select one or the other.
Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
Peter

Need to hide one of the selction screen block

Hi Gurus!
I need to hide one of the block in my selectrion screen and only display one radio button in that selection screen block . Somehow its not hiding the enitre block , so I tried doing the fields invisible but when it is transported it again makes it visible . Is it possible to do it through programming code itself rather than through screen.
Follwoing is the block that I need to hide.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-004.
PARAMETERS:
rb_list RADIOBUTTON GROUP rb1 DEFAULT 'X' USER-COMMAND opt.<<<<<<<<need to hide this
SELECTION-SCREEN BEGIN OF BLOCK b4i WITH FRAME TITLE text-005 .<<< need to hide this block
PARAMETERS: p_header AS CHECKBOX MODIF ID b5,
            p_send   AS CHECKBOX MODIF ID b5 USER-COMMAND opt,
            p_overr TYPE sy-uname MODIF ID b6,
            p_alines AS CHECKBOX MODIF ID b5.
SELECTION-SCREEN END OF BLOCK b4i .
PARAMETERS: rb_alv RADIOBUTTON GROUP rb1 DEFAULT 'X'.<<<< Just need to show this on my selection screen
SELECTION-SCREEN END OF BLOCK b4.
In the above code I need to hide the block b4i and the radiobutton rb_list.
Help will be gretaly appreciated.
Regards
Aarav

Hi!
Thanks for the input but addition of that still gives me the first radiobutton 'rb_list 'in my selection screen .
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-004 .
PARAMETERS:rb_list RADIOBUTTON GROUP rb1 MODIF ID rad .<<<<< This is still showing up --want to hide this
SELECTION-SCREEN BEGIN OF BLOCK b4i WITH FRAME TITLE text-005 .<<<<< want to hide is block completely
PARAMETERS: p_header AS CHECKBOX MODIF ID b5 ,
            p_send   AS CHECKBOX MODIF ID b5 USER-COMMAND opt,
            p_overr TYPE sy-uname MODIF ID b6,
            p_alines AS CHECKBOX MODIF ID b5.
SELECTION-SCREEN END OF BLOCK b4i .
PARAMETERS: rb_alv RADIOBUTTON GROUP rb1 DEFAULT 'X'.<<< Just need to show this param,etere on the screen
SELECTION-SCREEN END OF BLOCK b4.
* At Selection screen output
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF rb_list IS INITIAL AND ( screen-group1 = 'B5').
      screen-active = '0'.
      MODIFY SCREEN.
    ELSEIF screen-group1 = 'B5'.
      screen-active = '1'.
      MODIFY SCREEN.
    ENDIF.
    IF p_send IS INITIAL AND screen-group1 = 'B6'.
      screen-active = '0'.
      MODIFY SCREEN.
    ELSEIF screen-group1 = 'B6'.
      screen-active = '1'.
      MODIFY SCREEN.
    ENDIF.
    CHECK screen-group1 = 'RAD' OR
          screen-group1 = 'B4' OR
          screen-group1 = 'B5' OR
          screen-group1 = 'B6' OR
    screen-active = 0.
    MODIFY SCREEN.
Thanks
Edited by: Aarav Agnihotri on Sep 29, 2009 6:08 PM

How to hide cells in the sumation row in bps web layouts

Hello xperts,
I'm looking for a possibility to hide certain cells in the sumation row within a planing table (layout) over the webinterface builder.
can anybody help me.
I know there is a possibility to influence a table with the tableinterface for reporting tables.
Is there any similar possibility in BPS- Web interface builder like a java script ?
Please help !!!

Hi Thomas,
what exactly do you mean by "hide certain cells"? Do want to empty the contents of the cell or actually hide the cell? Hiding works for entire rows or entire tables, but hiding colums or even single cells is a bit more difficult (given, that when you hide one cell, the table loses its rectangular shape and the rows and columns don't match anymore ).
I mangaged to change the appearance of certain objects with javascript. But that works only if you have an ID or NAME attribute in the HTML-source. Let's say you have a button and want to make it disappear.
1. Create the button in the wi builder, name it button1.
2. Create a text/html field, mark the html flag.
3. Edit the long text of the field:
<script>
document.getElementById('button1').style.display='none';
</script>
That will make the button disappear. But I don't think that the display attribute will have any effect on a TD. You can try with style.InnerHTML or maybe set style.color to the background color. But in any case, the TD in the HTML code needs to have an ID or NAME. Otherwise it can't be referred. Maybe changing the bsp with SE80 helps?
Simon

Anyone knows how to hide or dim the menu bar ?

Anyone knows how to hide or dim the menu bar ?

MagicMenu, but it may no longer work.
Auto-hide the dock and menubar on a per-app basis .
Hide Your Mac Menu Bar and Dock for a Cleaner Desktop.
All found doing a Google search. Why not give that a try first before posting here.

How to hide one column in PIVOT(in Union )

Hi experts
I have one problem regarding my Pivot report.
I have to calculate MTD an YTD in my single report so i have calculated MTD in one criteria (UNION) YTD in second criteria.
In my MTD i have to show 4 column: A B C D
and in YTD I have to show only 3 column : A B C
So how to hide column D in YTD.
Thanks in advance
Regards
Frnds

Hi John
I have done :
1. when i do cast as null to my D column in second report. I am getting error
(Union for non compatible)
2. so i done the cast in first report also..
3. Done the union all
4.and done the HIDE for column D in Result Column..
But still i am seeing it in my report in YTD...
So please help me its very urgent for me..

How to hide "Note that the search is case insensitive" text from Query Region

Hi,
When create a search page with Query region : Autocustomizationcriteria mode, page is showing automatically "Note that the search is case insensitive" text is showing automatically.
this is not needed. can you please let me know how to hide this one from page.
Regards,
Ram

Check this link:
https://forums.oracle.com/message/9227812#9227812
--Sushant

How to Hide adress of the form from adress bar

Hi all ,
i want to ask that is it possible to hide or change the adress of the form from the adress bar.....like when we run the form it shows the adress like
http://develoment:8888/forms90/f90servlet?form=C:\GMS\Forms\GMS_SHIPMENT.fmx&userid=GMS/GMS@gms&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
that is too long i want it does not show the whole adress and also same problem with reports when i call the the report it show the whole adress and that is not good security wise
i am using oracle 9IDS
thanks in advance
Shayan
[email protected]

go in your <forms-home>forms\server - directory. there is formsweb.cfg.
All the [default] - parameters are global. If you don't set a parameter in your own section, then the fallback-parameters are stored there.
at the end of the file you should write your own settings:
e.g.
# myConfig - this is an example for your own Config-Section
[myconfig]
form=myStartForm
imageBase=codeBase
splashScreen=no
separateframe=true
try it
Gerd

How to hide sys and other passwords from batch files

Hi all,
I have my production database install on win 2003 server.The DB version is 9.2.0.4. There are some batch jobs are made to perform certain tasks like one job updates stats on daily basis run by user system,other job does online hot backups of all tablespaces as user sys.The scripts of these jobs are made on text file ,that contains user passwords.I want to hide those passwords from other people say system administrator etc who has access to production server.How can I hide these passwords.Any help from your side is appreciated.
Best Regards,
Majid.

>
I have my production database install on win 2003 server.The DB version is 9.2.0.4. There are some batch jobs are made to perform certain tasks like one job updates stats on daily basis run by user system,other job does online hot backups of all tablespaces as user sys.The scripts of these jobs are made on text file ,that contains user passwords.I want to hide those passwords from other people say system administrator etc who has access to production server.How can I hide these passwords.
>
If you have administrator rights on the win server, you could make use of OS authentication for sys and a user, you create externally and give him dba role. These users could then connect to the database after being logged on on the win server with
SQL> connect / as sysdba
SQL> connect /Look at
http://download.oracle.com/docs/cd/E11882_01/network.112/e10574/authentication.htm#CHDBBFBF
to see how to create an externally identified DB user.
Kind regards
Uwe
http://uhesse.wordpress.com
Edited by: Uwe Hesse on 22.01.2010 08:53

How to hide one of the unions from the results?

Similar Messages

Maybe you are looking for