How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

Similar Messages

How to hide ribbon but show welcome control for all users using security trimmed control in sharepoint 2010

Hi All,
I have a requirement to hide ribbon in a document library for the read permission users. I have applied SPSecurityTrimmedControl, it is working for the read permission user but for the whole site it is hiding and also unable to see the welcome control,
like user name, sign in as different user, etc.,
<Sharepoint:SPSecurityTrimmedControl runat="server" ID="spTrimRibbon" PermissionMode="All" Permissions="ManageLists">
I want to apply SPSecurityTrimmedControl to specific list/library with welcome control. Can someone please help me here.
I Appreciate your assistance...
MercuryMan

Hello MercuryMan,
I guess you have applied your code in master page that's why it is hidden from site. To hide specific list ribbon, go to your list-->and edit the page-->then add content editor webpart and apply below script.
<SharePoint:SPSecurityTrimmedControl PermissionsString="ManagePermissions" runat="server">
<div id="s4-ribbonrow" class="s4-pr s4-ribbonrowhidetitle">
</div>
</SharePoint:SPSecurityTrimmedControl>
http://blogs.msdn.com/b/sharepointdev/archive/2012/04/30/how-to-hide-the-ribbon-in-sharepoint-2010-rajeswari-mohandas.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to hide ribbon from all item view for particular user group

hi friends
how to hide ribbon from all item view of particular list for specific user group.
using OOB functionality or javascript.

Hello,
Use this codeplex tool to hide ribbon to user group:
http://spribbonvisibility.codeplex.com/
If you don't want to use above tool then you have to add SPSecuritytrimming in "Rajiv Kumar" code for filtering based on user group permission.
http://www.topsharepoint.com/hide-the-ribbon-from-anonymous-users
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to hide Saved Searches in the header area of web ui

Hi All,
My Query Is how to hide Saved Searches in the header area of web ui.
For This is there any configuration or we have do through the code.
Thanks & Regards,
Venkat

Another approach:
Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
put there a
Width=0px;
The other way using business role is fine as well.
cheers Carsten

How can i order a new printer head for my photoshop 7250e

How can i order a new printer head for my photoshop 7250e Is there a number i can ring to speak to someone or email address i can use or a web page where i can order one
or a list of agents i can use to get it from
Finding simple information seems impossible, no where does it mention spares or replacements
I have tried a lot of fault finding am convinced this is the problem

Hello NigelH1,
The Print Head for the Photosmart 7250 is not available outside HP.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How do I set Firefox to be usable for all users on one computer?

How do I set Firefox to be usable for all users on one computer?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How to set an screen variant as default for my user?

Hello,
For example in t-code FB50 we have 4 screen variants. The default screen variant is 1. How can I change the default sreen variant for my user only ?
Thanks,
Alexandre

Hi
Use T.code FB00 and in the document entry tab in screen templates and line layout variant for doc entry enter necassary details
For further details, the following link may be useful:
http://www.r3.duke.edu/stepbystep/journal/3.pdf
Regards
Aravind
Assign points if useful

HT1807 how do I make sure to encounter charges for roaming but still use my phone on wifi? I have viber app and would like to message also without additional charges. Is there a setting I need to hit to ensure this?

Travel internationally and use my ipohne with wifi, how do I make sure to avoid charges for roaming but still use my internet and messaging on wifi? I have viber app and would like to message also without additional charges. Is there a setting I need to hit to ensure this?

Settings>General>Network>Roaming>Data Roaming>Off. If you really want to be absolutely certain, Settings>General>Network>Cellular Data>Off.

Hide Unit price from sales order for sales user without change authorization of document setting

Hi all expert
Hide Unit price from sales user without change authorization of document setting.
I have also refer this note
SAP B1 2005 Purchas Order,Good Reciept PO'S, and Unit Price Block
but sill I had not getting my proper solution.
I want to restrict sales person to see & access unit price. Here I know option of block authorization of document setting but its not good option because , In future ,if sales user wants to changes forms setting in future so Its become problematic for user. so I want do this without restrict user for form setting & only hide unit price table from him/her. also He/her able to access form setting with out unit price.
Please reply
Amol Nikam

Hi Experts,
Please Tell me Is there any option "Hide Unit price from sales order for sales user without change authorization of document setting"
Regards/Thanks
Amol

How to hide the to address

I am sending a email to a list of addresses seperated by comma. The to address (all email addresses) is shown to all persons. How do I hide the to address from showing ?
I am using Java mail 1.3
Thanks,
bala

Insert the addresses you want to hide in the BCC field instead of TO field.

How to hide custom fields in Shopping cart depening on user role

Hi,
We have some custom fields in shopping cart for basic view. Every thing works fine. Now client is asking to hide all the custom fields based on user role.
I found some function module to fund roles. now my main problem is unable to find the cusotm filed screen field name.
When I tryed to find the screen field name using BBPSC02/03, its giving 'GT_DISPLAY_100-FIELD'. If I try to use this field, its not working.
Could you pls tell me how to find custom screen filed name to hide in shopping cart.
Thanks,
Ram

Hi Ram,
As Laurent suggested,to hide the custom fields based on the user role,you need to implement the logic in BADi "BBP_CUF_BADI_2".
You have the importing parameter IV_USER in this BADI.
Pass this parameter to tables AGR_USERS and AGR_USERT to get the user role
OR
Use FM: BAPI_USER_GET_DETAIL
with USERNAME= user id and can retrieve Table: ACTIVITYGROUPS Field:AGR_NAME
if you want the otherway around
you can also use FM: RSRA_USERS_OF_AGR_GET
with I_AGR_NAME= role and you can retieve Table: ACTIVITY_GROUPS_USERS Field: UNAME(usr Id)
Then check the value for the User role as obtained using the above steps and accordingly set the property for the custom fields to hide them.
BR,
Deepti.

How to hide folder in PCD with respect to other user

Hi,
     I want to hide some folder in PCD,suppose any other user enter into portal,he is not able to view the particular folder with out my permission.
    for eg."X" user hide one folder means,"Y" user not possible to view the hided folder.
     can any one tell the steps,how to do this functionality.
Thanks in advance,
Ashok

System admin -> Permissions -> Portal Content -> Your folder or object. Double click.
Cheers

How to add security credentials to SOAP header for EBS Web Service call..

All,
I am trying to invoke a webservice that I successfully exposed as a WSDL Web Service using EBS Integrated SOA Gateway. I am using OBIEE 11g Action Framework which uses WebLogic.
Here are the steps I completed:
- I exposed a WSDL web service in EBS R12 via Integrated SOA Gateway
- I granted the access to this service in EBS R12 to user SYSADMIN
- I used OBIEE 11g to make a Action to call the Web service (using Action Framework) by searching for the WSDL
- When I try to execute the action: I get the error:
Action could not be invoked.
ServiceExecutionFailure :
Error invoking web service HR_PHONE_API_Service at endpoint http://ip-10-87-33-3.ec2.internal:8000/webservices/SOAProvider/plsql/hr_phone_api/ Missing <wsse:Security> in SOAP Header
PROBLEM: I am unsure how to add the credentials for SYSADMIN user and password to add the SOAP username/pwd to the outgoing call. Anyone on this forum know how to set up the SOAP to call with the correct credentials? I have been looking at the documentation but it is not clearly explained.

Dear Heiko,
did you solve this problem?
We are facing the same problem. Every parameter that requries "cmd" does not work. I guess we don´t use this paramter the right way.
Best, Chris

How to hide the view latest instance option for the reports in XIR3

Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
Applied this access level for a particular group on a particular folder.
Login to Infoview and when view the history,there are no instances for a particular report under that folder.
But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
As per the security assigned,the user should only be able to view the instances owned by him.
Plz help me how to hide the option in INFOVIEW

In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
HYA_USER_PREFS
But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
Good luck,
Karen

How do we determine the HTTP authentication header for our hosted solution?

How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!

Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

How to hide remote IP address in header for roaming users

Similar Messages

Maybe you are looking for