How to hide/show the UIWebView

Can I hide the webView? I want to show some 'loading' screen until webpage loads completely, and then bring the webView to front.

While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne

Similar Messages

  • How to Hide/show the columns data while doing Drill down or drill up

    Hi ,
    How to Hide/show the columns data while doing Drill down or drill up in webi report .
    Does it possible BO 3.1 version ?
    Please suggest me on this.
    Thanks & Regards
    Venkat

    While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
    So I have an alerter applied to every cell of the table.
    When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
    because its now empty and doesn't need to show, it wont.
    For the detail table I use the opposite, so when you drilled down it becomes visible...
    Hope this helps all that do not have 40 yet
    Good luck,
    Marianne

  • How to hide/show dashboards for user/groups

    Hi,
    Please help on how to hide/show dashboard menu/sub menu to users/groups based on their profile settings.
    thanks in advance.
    regards,
    kumar.

    Hi Jinu,
    1) Do some or all of those subreports span multiple pages?
    2) Do each of the Subreports start on a new page?
    If yes, for both, then here's what you need to do:
    1) Create a formula (@True) with this code:
    shared booleanvar SetStatus:= True
    2) Create another formula (@False) with this code:
    shared booleanvar SetStatus:= False
    Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
    Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
    Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
    shared booleanvar SetStatus;
    -Abhilash

  • Hide/Show the items in form

    Hi all,
    I am having one form in oracle apex3.1 and having some form elements like below.
    ================================
    NAme : textbox
    job : radio botton with (freshor,experieced)
    year of experience : tx
    if i select the experienced from job radio , i have to display "year of experience : tx" otherwise no need to display that row.
    =================================
    Please help me . i am trying last one month . Please give me step by step procedure.
    Thanks in advance.
    Regards
    Dhanush.R

    function onchange_jobtype(pValue) {
         var empIdFField      ="P2_REM_EMP_ID";
         var empNameFField     ="P2_REM_EMP_NAME";
         var contNameFField      ="P2_REM_CONTRACT_NAME";
         var empIdlField           ="L_P2_REM_EMP_ID";
         var empNameLField     ="L_P2_REM_EMP_NAME";
         var contNameLField      ="L_P2_REM_CONTRACT_NAME";
         if(pValue=="None") {
              html_HideElement(empIdFField);          
              html_HideElement(empIdLField);
              html_HideElement(empNameFField);          
              html_HideElement(empNameLField);
              html_HideElement(contNameFField );          
              html_HideElement(contNameLField);
         else if(pValue=="Employee") {
              html_ShowElement(empIdFField);          
              html_ShowElement(empIdLField);
              html_ShowElement(empNameFField);          
              html_ShowElement(empNameLField);
              html_HideElement(contNameFField );          
              html_HideElement(contNameLField);
         else if(pValue=="Contract") {
              html_HideElement(empIdFField);          
              html_HideElement(empIdLField);
              html_HideElement(empNameFField);          
              html_HideElement(empNameLField);
              html_ShowElement(contNameFField );          
              html_ShowElement(contNameLField);
    From above JS, I am able to hide/show the Textfields. But i am not able to hide/show the Label . Already I have created the Label and set the addition id.
    Please suggest me , how can i proceed on this ?

  • OS 10.10 how to hide/show a folder with a password using terminal

    In Yosemite 10.10.2 Terminal Can you please tell me how to hide/show with a password then show again on already existing folder created on a system drive and also an external drive. Please provide the path text to folder name "wbfiles". Thank you Winwoodb

    You can drag it from one place on a drive to another.  If you are moving it from one drive to another then it copies it.  If you are moving it on the same drive and are getting that message then not being able to move the folder is the least of your problems.  Free up space immediately because your computer is about to crash and probably lose files.  Then you'll have lots of space.

  • How i can show the user input in alv list on the top

    hi all,
                   please tell me how i can show the user input in alv list on the top.
                         and  also tell me how i  can hide the toolbar in alv.
    regards
    vikas saini

    Hi,
    Use the Below Code.
    form top_of_page.                                          
      data : it_header type slis_t_listheader,
             is_header type slis_listheader.
      is_header-typ  = c_h.
      is_header-key  = space.
      is_header-info = 'Pending Order Information Report'(018).
      append is_header to it_header.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
          it_list_commentary = it_header.
    endform.                    "top_of_page
    and finally pass it to .
    call function 'REUSE_ALV_GRID_DISPLAY'
          exporting
            i_callback_program     = sy-repid
            i_callback_top_of_page = 'TOP_OF_PAGE'
    call function 'REUSE_ALV_GRID_DISPLAY'
          exporting
            i_callback_program     = sy-repid
            i_callback_top_of_page = 'TOP_OF_PAGE'
    Regards.
    Arbind

  • How to hide/unhide the all Treenodes on Treeview based on Checkbox changed event in Sharepoint custom webpart Sitecollections

    How to  hide/unhide the all Treenodes on Treeview based on Checkbox changed event?
    Checkbox(Control)
    1.Checkbox Checked:(Action below like)
     if user click on  Checkbox, all the treenodes on treeview is hide.
    2.Checkbox Unchecked(Action below like)
    If user uncheck the Checkbox  all the treenodes on treeview is unhode.
    Could you please help me how to do above one.
    Badri

    Hi,
    According to your post, my understanding is that you want to hide/show the TreeView when the Checkbox checked/unchecked.
    We can use jQuery to achieve it, the following script for your reference:
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(function () {
    $("input[type=checkbox]").click(function () {
    if (this.checked) {
    $("#TreeViewID").hide();
    } else {
    $("#TreeViewID").show();
    </script>
    More information:
    http://dineshsharepoint.blogspot.com/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to hide/remove the following links

    how to hide/remove the following links under All My Trips tab.
    the column u2018Recommended Actionsu2019 shows the link create travel plans when the trip is specific status. This link should be removed.
    Whereas in the same place, if u2018Change Travel Expense Reportu2019 is shown then it should not be removed

    got solution from the following document.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0ca7949-af7b-2b10-db80-ed8ca509f573?quicklink=index&overridelayout=true

  • How to hide/show chart at runtime

    Hi All,
    Can anyone help me in how to Hide/Show a chart at runtime.
    Thanks & Regards
    K.Srinivas

    Hi
    THere is simple way of doing it. Follow the steps below -
    1. Create 'Radio Button' in another form.
    2. Create 2 buttons in it e.g - 1=Show & 2=Hide.
    3. THen there is option as 'Visibility Condition' on Chart 'Properties'.
    4. Write condition as - IF('Form Tech name'@ST1=="1",true,false)
    here ST1 is tech name of the radio button you can select it in formula option.
    5. Then make 1 or 2 as default value.
    You can change radio button at run time & you can show or hide the chart.
    Let me know if you have any issue.
    Regards
    Sandeep

  • How i can show the selection screen input field in the top of page in alv

    hi ,
              how i can show the selection screen input field in the top of page in alv  grid output.
    tell me the process

    Hi,
    excample from my program:
    FORM topof_page.
      DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
            l_info        LIKE l_it_header-info.
      DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
      DATA: l_key LIKE l_it_textpool-key.
      READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
      DEFINE m_selinfo.
        if not &1 is initial.
          clear l_it_header.
          l_it_header-typ   = 'S'.
          l_key = '&1'.
          translate l_key to upper case.
          read table l_it_textpool with key key = l_key.
          if sy-subrc = 0.
            shift l_it_textpool-entry left deleting leading space.
            l_it_header-key = l_it_textpool-entry  .
          endif.
          loop at &1.
            case &1-option.
              when 'EQ'
                or 'BT'
                or 'CP'.
                write &1-low to l_it_header-info.
              when others.
                write &1-low to l_it_header-info.
                concatenate &1-option
                            l_it_header-info
                       into l_it_header-info
                       separated by space.
            endcase.
            if not &1-high is initial.
              write &1-high to l_info left-justified.
              concatenate l_it_header-info
                          l_info
                     into l_it_header-info
                     separated by space.
            endif.
            if &1-sign = 'E'.
              concatenate ']'
                          l_it_header-info
                     into l_it_header-info.
            endif.
            append l_it_header.
            clear: l_it_header-key,
                   l_it_header-info.
          endloop.
        endif.
      END-OF-DEFINITION.
      m_selinfo: s_trmdat,
                 s_trmext,
                 s_trmint,
                 s_fkdat,
                 s_delno,
                 s_vbeln,
                 s_deact,
                 s_kdmat.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                it_list_commentary = l_it_header[].
    ENDFORM.
    I hope, this will help you.
    Regards
    Nicole

  • How to stop showing the pop-up window to change password

    Hi,
    How to stop showing the pop-up windows of changing password if the password is expired in dba_users table. This is related to form6.
    Pls advice.
    Thanks
    Raj

    Raj,
    Please do not start a new thread with the same problem. If you still need help, respond to your former thread, and we will still try to help you. But you haven't provided an answer to why you can't trap the error.
    Re: Trapping of error ora-28001, user expired in daa_users table

  • How do you show the number of days per month?

    How do you show the number of days per month?
    I am working on a budget.  I want to know how much to amortize each month to fund an investment.  Income comes monthly, but expenses leave in days, or weeks.  The number of days and weeks in months vary. 
    I want to figure out income and expenses per day, per month and per year, so I know how much can be invested each month, week or day.  For a start I would like a formula that shows how many days are in each month?

    thanks..
    I solve my problem as
    public class MyExample {
        public static void main(String a[]) {
            String stdate = "2009-03-01";
            java.sql.Date currentDate = new java.sql.Date(System.currentTimeMillis());
            java.sql.Date preDate = java.sql.Date.valueOf(stdate);
            System.out.println(currentDate);
            System.out.println(preDate);
    //        int dateCom = preDate.compareTo(currentDate);
    //        System.out.println(dateCom);
            long diff = currentDate.getTime() - preDate.getTime();
            int days = (int) Math.floor(diff / (24 * 60 * 60 * 1000));
             System.out.println(days);
    }

  • How can I show the chart in forms?

    Dear all:
    I want to create a line chart. I use the chart wizard and it is successful to create the chart. But, it can't show the chart when I run the form. How can I show the chart in form6i?
    Besides, I see a document that refer to 'OG.pll'.
    I can't find the OG.pll in form6i. Do I need 'OG.pll' to show the chart when I run the form? Thank you very much!!

    Hi Carlos,
    You can try to create a code node for check which signature to print.
    In global variable declare a variable ie named g_sign type TDOBNAME.
    Then pass this var to name of graphics &g_sign&
    please check and reply.
    regards,

  • How do i show the filename.type instead of the entire file path?

    How do i show the filename.type instead of the entire file path?
    I want it to show "ProgramSetup.exe" instead of "C:/Program Files/Oracle/JavaFX/ProgramSetup.exe"
    I have created a JavaFX program with the help of my manager
    below are the code
                   File file = fileChooser.showOpenDialog(Admin.mainStage);
                   if (file != null) {
                        textFiles.setText(file.getAbsolutePath());
                        String absolutePath = file.getAbsolutePath();
                        //String fileName = new File(absolutePath).getName();the reason i put the last line as // because it has error on that line....
    if i remove the last line, it will display but with the full path....
    i search through google and the guide on many forums aren't clear to me.....some said there are 2 ways but i tried and it is not working, atleast for me...maybe i left out something or what....can anyone help me on this?

    You don’t need the absolutePath:
    File file = fileChooser.showOpenDialog(Admin.mainStage);
                   if (file != null) {
                        textFiles.setText(file.getName());
                               }

  • How do I show the details of a customer when they are logged in a secure zone?

    How do I show the details of a customer when they are logged in a secure zone?
    I want to show the customer details as well as some customer CRM fields that are applied to the customer. None of these are entered via a form, they would be entered by the client. The customer would need to be able to log in to view the information and get an email alert when it is updated. Help!?

    Hi,
    You might want to look into customer service zones which allows customers once logged in to see their case, order and own details. 
    - http://kb.worldsecuresystems.com/133/bc_133.html
    - http://kb.worldsecuresystems.com/kb/customer-service-area-orders.html
    - http://kb.worldsecuresystems.com/kb/allowing-customers-view-update-crm.html
    Kind regards,
    -Sidney

Maybe you are looking for

  • Trouble deploying endeca studio application in weblogic: endeca-portal-weblogic-3.1.14220.ear

    Hello, I'm trying to install Endeca Studio on weblogic and I'm seeing a class not found error during the "install" step. The CPU spikes up during the deploy and no progress is made. The error is seen below. Any insight would be appreciated. I have in

  • User is getting critical error while accessing ESS

    Hi Experts, User is getting critical error message while accessing ESS tabs ( working time , career and job ...etc ). User account in PORTAL  as well as in the ECC Backend is fine.(105 infotype is maintained). User has valid roles also. Can anybody p

  • Now my external firewire drives won't sleep on 2012 iMac

    I have WD Mybook Studio and a Lacie2big hard drives. Now they won't sleep when the iMac is put to sleep. I guess I'll have to look for firmware updates. I checked on the WD this morning and didn't see anything new. I'll check on the Lacie tonight. Ha

  • Any chance of syncing my 5G video ipdod via firewire ?

    If I was to get an older ipod firewire dock, and use the included adapter plate, can I sync (and charge) my 60G ipod/video via firewire ? I am running out of USB ports and don't have room for another hub, it's a pain plugging and unplugging. I do hav

  • Old reports / views should be deactivated (not to run)

    Hi Experts,     We have set of reports in production which are not optimized for performance. So now we have created new set of reports and transported to production. Now we want to de-activate all old reports and views, so that business will run onl