How to hide tooltips on user action

Generally Tooltips will be displayed for the pre-defined time interval. But is there any way to hide the tooltips when the user performs some action.
Please help me.

Hi Thanks for your reply.
But in my case: I have JFrame as main window and JPanel as the workspace. JFrame also had toolbar. User can click a button in the JPanel to replace the existing panel with new panel. The toobar buttons will be changed based on the panel that is currently shown.
Now,
1) Focus the button (using keyboard) on the on the panel.
2) Place the mouse pointer on one of toolbar button to show tooltip.
3) Press the button (use keyboard) on the panel to get the new panel.
Do steps 2) and 3) with very less time gap.
In this case new panel will be displayed with new toolbar icons but the tooltip of previous toolbar button still showing.
I know the problem is that the tooltip show time is more than the time that took for changing the panel.
Is there any other way to fix this, instead of decreasing the tool tip dismissdely time.

Similar Messages

How to programmatically mimic the user action of selecting a button ?

I am using JAVA Swings to build a desktop application. The application has many buttons, lists and text boxes etc. I have created actionPerformed methods that monitor the source for user action. I am able to execute the code whenever an action is performed by user manually.
I also require to save the choices, and texts entered by a user during his active run with the application. This is to avoid user to re-enter all the information once again.
The problem is to programmatically select those buttons and lists which were saved during users earlier session. How can I perform the action event of selecting a radio button from my java code.

Kiran,
Your approach is missing the whole idea of Model-View-Controller. I suspect that somewhere you are saving the data of the user's choices. For example, if you have a checkbox, I suspect you have a java bean somewhere containing a boolean value that is set to true when the checkbox is selected, and false when the checkbox is unselected. This process is mediated by a controller, which has a references to the model (the data) and the view (the UI). The controller sets up as a listener to the actions within the UI, and, when notified, sets the appropriate properties of the data, usually into one or more java beans.
So, on the reverse side of things, the data is read into the java bean(s), and the controller uses that data to set the state of the UI elements. So, your controller can do something like this:
    uiThing.initUI(yourBean);And in the initUI method you have:
    public void initUI(DataBean data) {
         cbxBlue.setSelected(data.isBlue());
         txtLastName.setText(data.getLastName());
         // etc...
    }If you take that general approach, you'll find you don't need to simulate user actions.
In the few cases within the UI where you think you do, you really don't. An ActionListener is just a receiver of when something like a button is pressed. If your program needs to do the same thing as when the button is clicked, create a method to perform the processing, and invoke it directly, rather than trying to figure out how to programmatically press a button.
     public void actionPerformed(ActionEvent e) {
          if (e.getActionCommand().equals("BlueButton"))
              this.setBlue();
          //... etc.
     private void setBlue() {
         // whatever
     // somewhere else in the code
     private void someProcess() {
          // other work
          // other work
          if (someCondition) this.setBlue(); // rather than forcing an action event
          // other work
          // other work
     }

How to Hide the Seeded User views using personailization

Hi ,
we have requirement in PO Buyer work center in R12 ,
Requisition search have seeded user views ,one of them is unassigned requisitions ,
i want to hide this view ,Please let me know is there any way .
Thanks
Maheswara Raju

Hi,
Please tell me the page name, I will check out how this can be done.
If possible put the requirement in much more details.
Regards
Apurba K Saha

SAP Cloud Marketing Lead How to Hide the Standard button action

Hi Experts,
In Marketing Lead TI screen button action event have 3 options
1) Convert to Sales Lead
2) Convert to Opportunity.
3) Convert to Account or Contact
I want to hide 2 option 1) Convert to Sales Lead and 2) Convert to Account and Contact from the Action button.
I have try to enhance the standard BO as shown below.
and when open the COD_Marketinglead_TI screen then i can not able to see 3 option under Action button.
Please anyone have idea about how to get these 3 options 1) Convert to Sales Lead 2) Convert to Opportunity. 3) Convert to Account or Contact under Action button.
Many Thanks,
Mithun

Thanks Dan for your reply.
I have few question
1) AP.CRM.Global:Lead is Marketing Lead BO or Sales Lead BO? if Not Marketing Lead BO then what is the correct path to extend the Marketing Lead?
2) I have extend the AP.CRM.Global:Lead BO when we enhance the screen it give the below options and i have selected the highlighted screen is it correct or not ?
After select the screen and click OK there are 4 screen comes automatically as shown below.
3) When i Open the COD_MarketingLead.TI screen in UI designer i can able to see this screen as shown below.
Here in this screen point 1 we can see that its COD_MarketingLead screen but in point 2 Screen Header Label is "Sales Lead" and point 3 under this Action button no 3 option available 1) Convert to Sales Lead 2) Convert to Opportunity. 3) Convert to Account or Contact. But when you open Marketing Lead we can able to see these option under the action event as shown below.
Help me how to get Marketing Lead Screen with above actions in UI Designer.
Many Thanks,
Mithun

Hide Gear Icon (Site Actions) from all Users Except Admin

SharePoint 2013: I need to hide the gear icon (site actions) from all Users except the admin. Please let me know the simplest and easiest way to achieve. I basically have Users that fall into two groups - View and Edit. For expansion
purposes though, would like the solution to include and group that may be formed in the future. Requirement is that only the Admin needs to see the gear icon. THANKS!

check the below link
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ec876026-12dc-4afa-b2ae-61e98e843b20/how-to-hide-the-whole-site-actions-button-please-read-for-details?forum=sharepointgeneralprevious
http://sharepoint.stackexchange.com/questions/53728/how-to-hide-only-site-action-using-securitytrimmedcontrol

How to hide custom actions from Oracle Worklist Application (Conceptual)

Hi,
I have a conceptual question in relation to Worklist Application and the Oracle Workflow. I will explain, now:
This is the image that demonstrate the situation (worklist app console): http://i53.tinypic.com/34h9ilw.png
As you can see, i have 4 custom actions (ENVIAR_ANALISE_FRAUDE, APROVAR, REPROVAR, ENVIAR_ANALISE_NIVEL2) and i have three main regions in the image
(Action By Menu 1, Action By Menu 2 and Action By Button 3).
I have to make same custom validations when the user to choose any action, then inside of the JSPX file (Human Task Page Generated), i made the following customizations to reach my objective:
1) At the Region 2 (Action By Menu 2) - I delete these lines of code to hide the actions:
<af:group id="g2">
<af:forEach var="childNode1"
items="#{actionAvailable.customActions}">
<af:commandMenuItem textAndAccessKey="#{childNode1.displayName}"
actionListener="#{invokeActionBean.setAction}"
action="#{invokeActionBean.action}"
partialSubmit="false" id="cmi2">
<f:attribute name="ACTION_MENU_ITEM"
value="#{childNode1.action}"/>
</af:commandMenuItem>
</af:forEach>
</af:group>
2) At the Region 3 (Action By Button 3), i change the default action button's to point to my managed bean action and make the required custom validations, in accordance to my requirements. After that i made my validations, i call some lines of code to make with the Oracle Workflow executes your default internal functions when an action is clicked.
<af:commandToolbarButton actionListener="#{myManagedBean.setOperation}"
text="Aprovar"
disabled="#{myManagedBean.isErrorOccurred}"
action="#{myManagedBean.invokeMyCustomizedOperation}"
partialSubmit="false"
visible="#{wf:isCustomActionAvailable('APROVAR', 'bindings.customActions')}"
id="ctb2">
<f:attribute name="DC_OPERATION_BINDING" value="bindings.APROVAR"/>
</af:commandToolbarButton>
public void setOperation(ActionEvent p1){
this.acaoSelecionada = (String) p1.getComponent().getAttributes().get("DC_OPERATION_BINDING");
this.operation = UtilWorkflow.getInstance().getOperationFromHumanTask(this.acaoSelecionada);
this.operation.execute();
InvokeActionBean ia = (InvokeActionBean)ADFContext.getCurrent().getRequestScope().get("invokeActionBean");
ia.setFinalizerJavaScriptName("closeBrowser()");
ia.invokeScript();
3) The great problem for me now is the region 1 (Region By Menu 1), this the part of Oracle Worklist Application and i cannot hide this Menu or change anything inside it. If the user click at the 'APROVAR' action, my custom validations will be ignored and the Workflow will approve my task, without intervention of my validations.
After explaining everything this, here are my questions:
1) Is this the correct way to work with the Oracle Soa Suite ?
2) How can i hide the Region 1 (Action By Menu 1) ? Is possible ?
Thanks,
Victor Jabur

Hi,
I am also in need of hiding or having custom validations for the actions in Region 1. Does anyone have any suggestions? Please help!
Thanks,
Farhana

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

How to preven JButton of generated actions when the user keep pressing down

How to preven JButton of generated actions when the user keep pressing down the key or the short cut
The code below to show the issue when the user keep pressing Alt+ O
We want to prevent the JButton from generating multi actions just one action only
A sample of code shows the behaviour which has to be prevented. Continue pressing "Alt +O" and you will see the standard ouptput will print time stamps
Please notice, I am NOT interested in Mouse press which has a solution by adding a threshold ( setMultiClickThreshhold(long threshhold) on the JButton as an attribute.
public class TestPanel extends JPanel
   private JButton btn;
   public TestPanel()
      btn = new JButton("Open");
      this.add(btn);
      registerCommand(new MyAction(), InputEvent.ALT_MASK,
            KeyEvent.VK_O, btn, btn.getText(), 0);
   public static void registerCommand(AbstractAction action,
         int mask,
         int shortCommand,
         JComponent component,
         String actionName,
         int mnemonicIndex)
      InputMap inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
      KeyStroke knappKombination = KeyStroke.getKeyStroke(shortCommand, mask);
      if ((component instanceof AbstractButton)
            && mnemonicIndex >= 0
            && mnemonicIndex < actionName.length()
            && (shortCommand >= KeyEvent.VK_A && shortCommand <= KeyEvent.VK_Z))
         ((AbstractButton) component).setDisplayedMnemonicIndex(mnemonicIndex);
      if (inputMap != null)
         ActionMap actionMap = component.getActionMap();
         inputMap.put(knappKombination, actionName);
         if (actionMap != null)
            actionMap.put(actionName, action);
   public static class MyAction extends AbstractAction
      private static final long serialVersionUID = 1L;
      @Override
      public void actionPerformed(ActionEvent e)
         System.out.println(System.currentTimeMillis());
   public static void main(String... args)
      SwingUtilities.invokeLater(new Runnable()
         public void run()
            JFrame frame = new JFrame("Testing");
            JPanel panel = new TestPanel();
            frame.getContentPane().add(panel);
            frame.setPreferredSize(new Dimension(500, 500));
            frame.setMinimumSize(new Dimension(500, 500));
            frame.pack();
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setVisible(true);
}Edited by: user12130673 on 2013-feb-13 03:01

Use KeyStroke getKeyStroke(int keyCode, int modifiers, boolean onKeyRelease) with onKeyRelease=true instead?

How to hide Actions Column in Table

Hi All,
I have a simple requirement: I am showing a table (items)
- the "Actions" column (Column with Buttons to Edit and Delete a particualr row) must not be show -> no changes to the table are allowed (I need to hide/ disable this column)
How can I hide this column od the table?
I have found out that the field is called thtmlb_oca and that htere is a getter method get-thtmlb_oca. However, the method does not contain coding and I do not know how to HIDE this field/ column...
Please help me here..
Thanks, Johannes

Hi Johannes,
To remove the column completely,
you need to comment this line in the method GET_TABLE_LINE_SAMPLE of the Table View Context node class.
TYPES: BEGIN OF line,
* thtmlb_oca type crm_thtmlb_one_click_action.
INCLUDE TYPE xxxx.
TYPES: END OF line.
Disabling can be controlled in the method GET_OCA_T_TABLE of the same class by putting code to delete the button.
LOOP AT rt_actions ASSIGNING <fs_actions>.
<fs_actions>-active = abap_false.
ENDLOOP.
Regards,
Masood Imrani S.

0 down vote favorite share [fb] share [tw] How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard. Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
Any clues will help a lot.
Thanks.

You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

How to Hide a User?

I'm trying to create an admin user without having the account showing on the login screen.
I came across this article:
How to hide a user account in OS X - Apple Support
Which says to enter the following into the Terminal (when using Yosemite):
sudo dscl . create /Users/hiddenuser IsHidden 1
The problem is after doing this and rebooting the user account is still visible.
I'm using OS X v10.10.2, and yes I did replace the hiddenuser reference with the user's home directory name I'm trying to hide (the command completed with no errors shown)...
Anybody know how to do this, and why the article shown doesn't appear to work???

Bobby T wrote:
I'm trying to create an admin user without having the account showing on the login screen.
I came across this article:
How to hide a user account in OS X - Apple Support
Anybody know how to do this, and why the article shown doesn't appear to work???
Did you try other methods described in that article?

How can I localize the text of process names, task names and user actions within a process?

I'm very interested in using the capabilities of Adobe LiveCycle Process Management for my project, however I have one rather large concern... I hope someone here can tell me whether there's a way to address it.
Since I work for the Government of Canada, I have to meet certain requirements relating to bilingualism of the user interface. It's my understanding that the Workspace portion of LiveCycle has already has support for French.
But what about the design of my processes? How can I display text to a user in the language of their choice when they're interacting with my processes? ... in particular, I'm thinking about the process name, task names, and user actions.
I hope that this is possible without too much pain. I imagine this must be a pretty common requirement!
Thanks in advance to all who respond.

You can completely change the content of whole pdf by using "renderPDFForm" operation under service "FormsService". in this operation there is Template category where you can set the Locale.
And if you need to change the other workspace options like Complete, Save as Draft , you can then import workspace ui project and then change apppropriate values.
Thanks,
Prashast

How to handle user action on messageChoice component ?

Dear all,
I create a OAF page and put a messageChoice component on it. And then setup its property as following:
ID: myChoice
Item Style: messageChoice
Action Type: fireAction
Event: changeChoice
Submit: true
and I set it a new controller, add the following code in it:
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
if ("changeChoice".equals(oapagecontext.getParameter(EVENT_PARAM)))
throw new OAException("call my function", OAException.INFORMATION);
In my opinion, when I re-choose a new option in choice component, the page should be submitted immediately, and my custom event "changeChoice" should be raised.
Unfortunately, I cannot catch my exception when my page is refreshed.
So I want to know how to catch the user action for this situation.
Any advice is appreicated.
Thanks.
Kenny

Kenny,
Any page action can be caught only in processFormRequest.
--Shiv

How to pause while document printing and wait for user actions.

How to pause while document printing and wait for user actions. (for sample: pressed button). Pause after each printed pages.

Print page by page after considering the user actions!

How to hide tooltips on user action

Similar Messages

Maybe you are looking for