How to Identify a sales order is in Change mode without looking at T-code

Hi Gurus,
I have a requirement we have the code in place to behave differently when it is in VA01 and VA02 in an user exit_save_document.
we are having trouble to trigger the code when the sales order is modified or created by a BAPI.
The check in the user exit is dependent on the T-code but when the BAPI runs it will be either the report T-code or se38 so how we can figure out without looking at T-Code in which mode the Sales order is opened i.,e Create or Change

HI,
You don't have to select the data from T180...
Just use the field T180-TRTYP in the sales order user exit...The value will already be populated by SAP..
Thanks
Naren

Similar Messages

How to identify open sales orders by sales representative by due date. ?

We rely heavily on forecasting our "billing pipeline". Billing Pipeline is defined in our organization by:
All billings for a specified date range + (all open sales orders + deliveries) not yet billed but due by a specified due date = Billing Pipeline.
The open items list by Sales Orders + Deliveries will accommodate that by the company but does not accommodate a breakdown by sales person.
I am looking for a way to generate all Sales Orders & Deliveries that are not yet billed by due date for each sales person.
Has anyone done this in SAP core reporting or have a query to accomplish this ...?
Thanks, Dan
Prograde

This one will show you Open orders by open lines by Sales Person by Date Range
You can use the same structure for Open Deliveries. Change Ordr to Odln and RDR1 to DLN1
Regards,
M. Jenkins
SELECT T2.SlpName, T0.DocNum, T0.CardCode, T0.CardName, T0.NumAtCard as 'Cust PO', T1.ItemCode, T1.Dscription, T1.Quantity, T1.OpenQty AS 'Open', T1.Price, (T1.OpenQty * T1.Price) AS 'Total Net', T1.ShipDate FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OSLP T2 ON T0.SlpCode = T2.SlpCode WHERE CONVERT(nchar(8), T0.DocDate, 112) >= [%0] AND CONVERT(nchar(8), T0.DocDate, 112) <= [%1] and T1.LineStatus ='o' ORDER BY T2.SlpName, T0.CardName, T0.DocNum
Edited by: Inc. Cowper on Feb 4, 2009 8:39 PM

How to check the sales orders that have been created with an Rebate Agreeme

Dear Experts,
Do you know how to check the sales orders that have been created with an Rebate Agreements?
Thanks!!

Hi Hoo Laa,
I have one way but little lengthy.
Rebate condition always appears in the billing document.
So 1st you extract the sales order list from Table VBAK.
once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
Now put that list in the table VBRK.
In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
It will show the result.
Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
Already said, Little lengthy
Regards,
MT

How to summarize Open sales order credit value

Hi, friends.
I am designing Add-on report about credit exposure.
I found the relevant tables of Credit Limit in FD32
KNKK
S066
S067
Then, I would like to show the document details of open sales order credit value in the report.
I tried to summarize the open sales order amount from VBAK, VAUK, VBAP, VBUP.
However, it doest match to the amount in S066 table.
Can anyone tell us how to summarize Open sales order credit value from SD documents?
Regards,
Yu

Sudheer,
You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
In the credit controal settings, you need to have settings for the credit check at the delivery level.
Hope this will solve your issue.
Regards,
Chetan
Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

How to find open sales orders.

Hi Gurus,
Can you please help me out How to find open Sales orders in SAP.
Is there any transaction code available or we can get it through via tables.
Your afforts are highly appriciated .
SRavani.

Dear SRAVANI,
You can find open sales orders from the Transaction code "VA05N", You just run this report, Below the screen you can find open sales orders radio button , you select this and give execution parameters and execute(F8).
You will get the all open orders.
Hope it fixes your issue.
Please check it and revert.
Thanks&Regards
Raghu.k

How to create a Sales Order

Hi Guys,
Any one tell me how to create a Sales Order. What are the Mandatory parameters we need to pass while creating. Thanks in advance.
Thanks
Kiran.B

Hello kiran,
<b>**REMEMBER: please do reward points for good answers**</b>
1.      Create sales order
This process step can be triggered as follows:
The customer accepts the quotation and places an order.
You create a sales order with reference to a quotation. For more information, see Structure link processing Quotations. The system copies the items from the quotation.
You create a sales order. This is also possible without performing the previous steps.
       2.      Enter products
You enter products requested by customers.
Note
If necessary, you can configure products again for every item of the sales order. You can find more information in the business scenario variant Structure linkQuotation and Order Management (Configure-to-Order) and under Structure linkProduct Configuration in the Sales Transaction.
       3.      Check availability, schedule order and create requirements
The system triggers an availability check and scheduling in SAP APO for every order item in SAP CRM. The confirmed quantities and dates are confirmed by SAP APO to SAP CRM, and saved in the sales order (see Structure linkAvailability Check in the Sales Order). At the same time, a customer requirement is created in SAP APO.
Note
You can also execute the availability check in SAP R/3. You can find more information under Structure linkAvailability Check with SAP R/3.
       4.      Maintain and determine conditions
The system determines the prices and the value of individual items. If necessary, you can process these. For more information, see Structure linkPricing.
       5.      Perform credit check
SAP R/3 executes a credit check based on the results of pricing in SAP CRM. The result of the credit check is confirmed in SAP CRM, and saved as the credit status at item level. For more information, see Structure linkAutomatic Credit Check.
       6.      System replicates sales order
After the sales order has been saved in SAP CRM, complete and without errors, it is replicated for logistics processing in SAP R/3. Order data is transferred together with confirmed scheduling lines to SAP R/3.
       7.      System receives sales order
After replication to SAP R/3, you can change the sales order in SAP CRM and SAP R/3. You can find more information on this under Structure linkData Exchange for Sales Transactions: CRM Enterprise - SAP R/3
       8.      Send order confirmation to customer
You can send the order confirmation either electronically, or in print to the customer. You can find more information under Structure linkSales Order Confirmation by E-Mail.
       9.      Monitor status of order
Regards
Ak

How to create a sales order step by step please..

hi,
how to create a sales order in detail step by step.
Regards,
BBR.
Edited by: BBR on Dec 7, 2008 7:47 PM
Edited by: BBR on Dec 7, 2008 7:53 PM

Hi BBR
Check the following configurations are done or not
1)Go to VOR1 & VOR2 and assign dist channels and divisions to sales orgn.
2) SPRO->sales and distribution->basic functions->setup partner determination , here you maintain partner determination with the partner functions for Customer account group ,standard for sold to party is 0001
3) Create a customer with XD01
4) In OVAZ assign the sales document types to your sales area
5) Go to VN01 and maintain number ranges and assign to your sales document type (Ex: OR)
6)Go to VOV8 and select the sales document type(Ex: OR) and there you assign the number range
7) IN VOV4 check the item category determination is correct or not
8)Go to OVKK and Assign pricing procedure RVAA01 to your sales area,Cupp ,Dupp.
9) Maintain conditon records for the condition types that are there in the pricing procedure
10) Create a Material Master Record(MMR)
11) Now you can create the sales order with VA01
Regards
Srinath

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

How to block a sales order when there is a free good item .

Hello Gurus ,
How to block a sales order when there is a free good item , only the authorised person should have authorisation to release those blocked Sales orders.
Reason - They want to have a track of free goods given to customer & to avoid the misusing things
Looking for your inputs
Thanks in advance
Regards
Venkat

Hi
I think you can try with Status Profile in BS02 define and assign for item category TANN.
In status profile you can block the delivery and also billing unless some changes the object status as released.
Just try and explore
regards
Prashanth

How to create open sales order using BAPI....?

Hi Guru's,
please help me how to create open sales order and which BAPI i have to use for open sales order.
please provide any program logic related to this or step by step process.....
that would be helpful to me.
thanks in advance...
Srinivas....

Hi sreenu,
Open PO or Open sales order means that the complete cycle is not complete. That means the Sales order is not completely delievered or is not billed or is not paid for. Only once the cycle is completed the order status shows as complete untill then its Open.
You can use VA05 to find open sales orders.
Similarlry open PO's are those PO's whos inbound delivery is not complete or whos goods receipt is not complete and whos payment is not done to the vendor
U cannot directly find the open PO and open SO from any table.
That u have to calculate from the status of the PO and SO and then check wheteher that is complete or not.
U have table VBUP for SO status.Check out the fields in that table
pls see the below link.
http://abaplovers.blogspot.com/2008/02/bapi-sales-order-create-code.html
http://msdn.microsoft.com/en-us/library/cc185190.aspx
thjanks
karthik

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to identify a particular order type(PP01) is coming to APO?

How to identify a particular order type(PP01) is coming to APO? Can it be checked at CIF exits on APO side?

Hi Abhishek,
I am looking for exits at APO side only.
Thanks,
Prenith PP

How to pull the Sale order number(sales document) to Accounting document

Hi Gurus,
How to pull the sale order number to the accounting document.
Is any configuration needed to this.
When i run the FBL5N Repoprt ,Sale order number (Sales document) is not getting updated to accounting document.It is diplaying as blank field.
Thanks you.

Hi Shivaji,
In order to display the Sales document in the customer line item report, you need to add it as a special field thorugh customizing settings.
Path - SPRO - FA-GL Accounting - GL Accounts - Line Items - Define special fields for finding and sorting data and in that select the table BSEG-and field VBEL2 (Sales document) and save/
This will work. hope this helsp
regards,
radhika

How to convert General sales orders to Duplicate one

Hi all
i want to know about duplicate sales orders ... How to convert sales orders into duplicate sales orders
i know we can check in SDD1 Table
but i want like to know how to convert General sales orders to Duplicate one
Thanks a lot

There are some missing links in your question:
1. SDD1 is a TCode for a report, not a table.
2. Do you know anything about "duplicate sales orders" concept in SAP? Please refer following SAP help link which talks about duplicate sales orders and business scenario associate to it.
- Eliminating Duplicate Sales Documents - Sales (SD-SLS) - SAP Library
If that doesn't cater you requirement or help you, then please elaborate your requirement.
Thanks, JP

How to create a Sales Order through an EDI configuration.

Hi
How to create a Sales Order through an EDI configuration.
Tell me the step-by-step procedure for this.
Any power point presentation would be fine.
Cheers
Maruthi

Hi,
You can go to these links to know little bit about sales order creation through EDI/ALE by means of IDOCS.
http://www.riyaz.net/blog/index.php/2008/01/19/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/
Sales Order Idoc Extension.
http://www.*******************/2007/11/abap-idocs-basic-tools.html
For any specific information, just do a google search(information like message t ype, IDOC type, Functoin module, etc. You will definitely get the information you are looking for
Please reward if this helps you

How to Identify a sales order is in Change mode without looking at T-code

Similar Messages

Maybe you are looking for