How to identify the device is locked or not?

how to identify the iphone is locked or not

Call AppleCare, give them the model and serial number and ask them if it is locked and if yes, which cell carrier it is locked with.

Similar Messages

  • How to identify the no is prime or not ,no is more than 9 digit?

    how to identify the no is prime or not ,no is more than 9 digit?
    becaz long does not store more than 9 digit , like example
    long number=9876543218; // it will throw the compile time error
    so how to get this?

    It is too easy to understand whether the given value
    is prime or not.
    THe following code snippet does this .
         public boolean isPrime(int pr){
              int num = 0;
              for(int a = 2; a < pr; a++ ){
                   if(pr % a == 0)
                        num = 1;
              if(num == 1)
                   return false;
              else
                   return true;
         }(Simple eh)And if you end at the square root of pr you get a nice speedup. You can get a further speedup by changing the incrementation strategy (2x really easily, 6x if you start at 5 (explicit test for 2 and 3) and increment alternatively by 2 and 4), but that's not entirely necessary.
    ~Cheers

  • Is there a solution to open the network locked iphone 6 Ali Sprint I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

    Is there a solution to open the network locked iphone 6 Ali Sprint
    I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

    There is no solution other than to contact Sprint and ask them if they will unlock it.

  • Windows 8 does not go to sleep - how to identify the device/app preventing sleep

    Hello,
    I have a quite new Windows 8 Pro installation upgraded from Windows 7, but as a clean install. It is running on a Asus K53E laptop bought almost a year ago but I ran into a problem with going to standby mode. The laptop successfully dims the display and
    then turns it off at the set time but it never reaches the sleep mode.
    I followed the steps from http://support.microsoft.com/kb/976877 but to no avail. The command
    Powercfg - devicequery wake_armed shows only keyboard and mouse but I don't suspect the mouse as it is Microsoft Wireless Mouse and I turn it off before trying to induce sleep. I have made sure to turn off iTunes media sharing and Windows Media
    Player Network Sharing service. The drivers are from Microsoft or the newest I could get from Asus.
    The command
    Powercfg -energy showed some errors - mostly with USB devices/hubs and with one of the system drivers:
    System Availability Requests:System Required Request
    The device or driver has made a request to prevent the system from automatically entering sleep.
    Driver Name
    \FileSystem\srvnet
    I rather suspect some incompatible driver but to press Asus support for some update I would need to know what to blame. I reviewed system logs in Event Viewer but can't find any useful entries around the time when the computer should go to sleep, but there
    are so many logs that I might have missed the right one. So my question is if somebody could introduce me to a tool that would help to pinpoint the problem.
    I see the subject is quite ubiquitous for Windows 7 so I would be grateful to anyone who could suggest any options other than mentioned above.
    Thanks in advance,
    Chris

    Hi luke, I tried your script. However, it seems that once in a while srvnet crashes during the restart. Can you help me on this? Chris
    Hi Chris
    Not sure why that would be but - you could add some error-checking logic to the script to test whether srvnet has successfully started, and then if it hasn't - attempt to restart it again. I haven't tested this code because I haven't had that issue, but something
    along the lines of:
    @echo off
    set logfile="%TMP%\srvlog.txt"
    if exist %logfile% goto begin
    echo [%date:~4,10% %time%] logfile created>%logfile%
    :begin
    echo -->>%logfile%
    echo [%date:~4,10% %time%] srvnet check triggered>>%logfile%
    openfiles /Query 2>NUL | FIND /C "INFO: No shared open files found" >NUL
    if errorlevel 1 goto yes_opens
    echo [%date:~4,10% %time%] no open files, proceeding to check for srvnet driver block>>%logfile%
    powercfg -requests | find /C "[DRIVER] \FileSystem\srvnet" >NUL
    if errorlevel 1 goto no_srvnet_block
    echo [%date:~4,10% %time%] **block detected, restarting srv**>>%logfile%
    net stop /y srv >NUL 2>NUL
    ping -n 5 -w 1000 127.0.0.1>NUL
    sc query srv | find "RUNNING" >NUL 2>&1
    if errorlevel 1 goto SrvNotRunning
    goto :eof
    :SrvNotRunning
    echo [%date:~4,10% %time%] **srv did not autostart, attempting manual start**>>%logfile%
    set cnt=0
    :wait1
    if %cnt% GEQ 5 goto SrvCantStart
    set /A cnt+=1
    echo [%date:~4,10% %time%] **waiting for SRV service to start [%cnt%]**>>%logfile%
    sc start srv >NUL 2>&1
    ping -n 2 -w 1000 127.0.0.1>NUL
    sc query srv | find "RUNNING" >NUL 2>&1
    if errorlevel 1 goto wait1
    echo [%date:~4,10% %time%] **SRV service is now running**>>%logfile%
    goto :eof
    :SrvCantStart
    echo [%date:~4,10% %time%] **Tried 5 times to start SRV but failed**>>%logfile%
    goto :eof
    :yes_opens
    echo [%date:~4,10% %time%] open files detected, not restarting srv>>%logfile%
    goto :eof
    :no_srvnet_block
    echo [%date:~4,10% %time%] no srvnet block detected, not restarting srv>>%logfile%
    goto :eof
    Let me know if that works better for you!

  • How to identify the locks in oracle db objects? i dont have access to check

    How to identify the locks in oracle db objects? i dont have access to check the v$lock or v$ objects. i dont have dba access. what are the symptoms for table, row or objects lock? how v guess it would be lock?
    Thanks in advance friends..

    I believe you will have to call your DBA on the phone in that case.
    You can query something with a select ... for update nowait.
    If it raises an exception you can handle it within a when section.
    -- Running in one session
    SQL> create table t1 as select 1 col1 from dual;
    Table created
    SQL> select * from t1 for update nowait;
          COL1
             1
    SQL>
    -- now running in a different session
    SQL> select * from t1 for update nowait;
    select * from t1 for update nowait
    ORA-00054: resource busy and acquire with NOWAIT specified
    SQL> set serveroutput on
    SQL>
    SQL> DECLARE
      2    CURSOR cur1 IS
      3      SELECT col1 FROM t1 FOR UPDATE NOWAIT;
      4    v_col1 NUMBER;
      5    locking_error EXCEPTION;
      6    PRAGMA EXCEPTION_INIT(locking_error, -00054);
      7  BEGIN
      8    OPEN cur1;
      9  EXCEPTION
    10    WHEN locking_error THEN
    11      dbms_output.put_line('Busted locking my rows!');
    12  END;
    13  /
    Busted locking my rows!
    PL/SQL procedure successfully completed
    SQL> Now, surely you won't be able to tell anything else other than there was something locked there.
    But none of the details you would find in the views.

  • HT5463 In my opinion, when the Silence setting is "only when the device is locked", it contradicts the settings you set above, like Manual. Can someone explain how these settings work together?

    Can someone explain how these settings work together? Manual seams to contraduct the SILENCE setting at the bottom of the Do Not Disturb page. It's very confusing.

    You should have seen information in the support document that you linked from. It used to be with the first version of Do Not Disturb that it would only function when the device was locked. That changed with iOS 7, and not it can be active all of the time. With it on Manual, it is on, but if you have the device "awake" that you can still receive calls/texts, etc. Sort of like you have the phone awake, so it isn't a problem for you to receive things. If you set the settings for Always, this means you can be doing things on the phone and not be disturbed by anything else. Does that make sense?

  • How to disable the message that pops up every time i connect my iphone "photos in the camera roll of iphone cannot be imported because the device is locked with a passcode"?

    Wrongly posted in iPhoto forum, should probably be posted here instead.
    I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
    This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.

    Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
    You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

  • How to identify the type of pocketpc barcode scanner?

    How to identify the type of pocketpc barcode scanner whteher it is intermec or symbol?
    GS

    Hi,
    well, this is the brand of the PDA - the Scanner itself is build into the device. So if you have an intermec device - you have an intermec scanner and vice versa. It is not recommended to use a HP device for example with an external scanner. This scenario is not really supported by the MI setup guides.
    Hope that helps!
    Regards,
    Oliver

  • How to get the device token in windows phone 8 sliverlight application?

    Hi,
    I am developing a windows phone 8 silverlight application . For my application I want to add push notification service , for this service I have to call one web service in my app . This api requires device token , device id ..etc , I am able to get the all
    the things except devicetoken .
    How to get the device token of a device ?
    any help?
    Thanks...
    Suresh.M

    Most probably device token is the push channel url which is returned by MPNS when a request is made to it.
    Step 3 here: Push notifications for Windows Phone 8
    http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

  • "Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode.  You must unlock the device to import them."  My iPhone 5 running the latest iOS 7.1 and I'm using iPhoto '11 v 9.4.3

    "Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode.  You must unlock the device to import them."  That's the new error message when I plug in my iPhone 5 running the latest iOS 7.1 into the MacBook Pro running iPhoto '11 v.9.4.3.  My Mac OSX is still 10.8.5.
    So, I unlock the iPhone by entering the "passcode" before I plug it into the MBP and still iPhoto does nothing.  At least it doesn't issue the error message above.
    I've checked both iPhoto preferences and those for Photos and Camera in the Settings on the iPhone.  There doesn't seem to be anything to change this lack of connectivity.
    What next please?

    An hour-long phone discussion with Apple Support yesterday solved this question and sorted a couple of others.
    As for this one, do not ignore any messages which pop up when you plug in your iPhone and ask "Trust this computer?".  The correct reply is "Yes", not "Cancel".
    OK, you cancelled like I did, thinking "What on earth is this for?".  Mistake.  You can force the issue by having iTunes open when you next plug in your iPhone.  Tell the iPhone that it can trust its old friend, your computer and voila!  Your photos can download into iPhoto again.
    Thank you, Jay with Apple Sydney, Australia!

  • Photos in the camera roll of "iPhone cannot be imported because the device is locked with a passcode.  Tried just about everything - suggestions?

    Photos in the camera roll of "iPhone cannot be imported because the device is locked with a passcode.  Tried just about everything - suggestions?

    Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
    You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

  • How to identify the user who created the variant

    Hi All,
    Can anyone tell me how to identify the user who created the variant ?

    Hi Dear,
    For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
    From this table u can know which user created the variant. Hope this solve your purpose.
    Regards

  • How can identify the default currency for a customer?

    How can identify the default currency for a customer?
    I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
    Blue

    Hi Gary,
    As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
    If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash

  • How to Identify the Type of Font Names in Illustrator

    How to identify the type of font names like "True Type font" (or) "open Type font" for illustrator file using Scripts or any language. Could you please advice me.
    Thanks,
    Prabudass

    If there is an Illustrator SDKor Illustrator Scripting forum, try
    that. ATM won't really help - it is obsolete and should not be
    installed (breaks things).
    Aandi Inston

  • How to identify the type of Fonts

    How to identify the type of font names like "True Type font" (or) "open Type font" for illustrator file using Scripts. Could you please advice me.
    Thanks,
    Prabudass

    The code below will prompt the user with the type face of a single text-frame.
    shastafir
    // 5/4/2009
    // Open a new document and create a single text box
    // with some type in it.
    // Get access to the active layer
    var aiDocument = app.activeDocument;
    var aiLayer = aiDocument.activeLayer;
    // Get access to the type-frame's font
    var textBox = aiLayer.textFrames[0];
    var theFont =
    textBox.textRange.characterAttributes.textFont;
    // Alert user with the name of the font
    alert(theFont.name);

Maybe you are looking for