How to  identify the instance where the service is running through sqlplus

Hello,
Suppose, this is a 2 node rac and where the failover is on and load balance is off.
I just want to know, that when during failover the service will points out to other instance.
1) Want to know, when the service gets failover after connecting to database [i.e., sqlplus]
2) Want to know, the instance where my service is running presently after connecting to the database. [i.e., sqlplus]
We are using ORACLE CLUSTERWARE 11G R1 and database 11g R1.
And also, I want to take the awr snapshot report where my servie is running at that point of time. Is there any way to find it out. Unnecessarily i don't want to generate the report for other instances as well.
Thanks in advance,
Thanks,
Edited by: user13095767 on 26-Feb-2012 22:40
Edited by: user13095767 on Feb 27, 2012 8:50 PM

user13095767 wrote:
Hello,
Suppose, this is a 2 node rac and where the failover is on and load balance is off.
I just want to know, that when during failover the service will points out to other instance.
1) Want to know, when the service gets failover after connecting to database [i.e., sqlplus]
2) Want to know, the instance where my service is running presently after connecting to the database. [i.e., sqlplus]
We are using ORACLE CLUSTERWARE 11G R1 and database 11g R1.
And also, I want to take the awr snapshot report where my servie is running at that point of time. Is there any way to find it out. Unnecessarily i don't want to generate the report for other instances as well.
Thanks in advance,
Thanks,
Edited by: user13095767 on 26-Feb-2012 22:40
please do not type the subject in upper case. please edit it.
refer the links:-http://www.ardentperf.com/pub/schneider-services.pdf
http://oracleinstance.blogspot.in/2010/08/transparent-application-failover-taf.html
for understanding the concept, http://docs.oracle.com/cd/B28359_01/rac.111/b28252/configwlm.htm
regards,

Similar Messages

  • How to measure the current/power running through iMac

    Hi
    After I moved from my old house to my new appartment, my 24" late 2006 iMac instantly started making this annoying high pitch noise.
    I've tracked it to coming from the area around the hard drive fan.
    I believe there might be a problem with the ground connection in the electricity system in the building.
    Is there a way to measure the current running through my dear iMac?
    Thank you very much.
    //Spaceranger
    ps.: also see my previous post where I tried to figure out what might be the problem.

    See here for the full tech specs of your machine:
    http://support.apple.com/kb/SP28
    You could connect a Volt/ Amp meter to the power outlet which will tell you what voltage/ current is being supplied, but you have to ensure the meter is set correctly or it could damage the meter being used.
    I'd ask an electrician to come in and have a look at the supply. They're qualified and know what they're talking about and may be able to shed some light on the problem.

  • How to Identify larger Infocubes where the dimension entry count is large

    Hi SDN,
    I need some help on Indexes dropping and Recreation.
    Please can any body help me on How to Identify larger Infocubes where the dimension entry count is as large as the Fact Table count.
    Need to suggest on a solution to implement the Indexes creation for optimizing the load performance of Larger Infocubes... Its urgenTT!!!!!!!
    Please help!!
    Thanks,
    MH

    Hi,
    I have ran the Report in SE38, also I have downloaded it to local Excel file.
    It is showing density, rows etc.Please can you elaborate on how to easily Identify
    the Larger cubes. As I have seen that the rows of both E and F fact table are displayed. How can I use this reports information in order to suggest for the Indexes?
    Help in this regard is much appreciated!
    MH

  • How to identify the follow up relationship between two service ticket

    Hi Folks,
    How to identify the follow up relationship between two service ticket ?
    Please help me on this...
    Regards,
    Shashi K, Reddy

    Hi Pepe !
    Thank you for the answer, but I dont find this structure ET_DOC_FLOW.....
    Please let me know is that structure is correct ......
    Regards,
    Shashi K, Reddy
    shashikumarreddy at gmail dot com

  • How to identify the trailing spaces in a column

    Hi,
    How to identify the trailing spaces in a column.
    for ex: empno char(5) and i enter 333 then there will be 2 spaces remaining. How to identify that two spaces

    One method...
    ME_XE?create table test1 (some_char char(5));
    Table created.
    Elapsed: 00:00:00.11
    ME_XE?
    ME_XE?insert into test1 values ('HI');
    1 row created.
    Elapsed: 00:00:00.07
    ME_XE?insert into test1 values ('HI HO');
    1 row created.
    Elapsed: 00:00:00.07
    ME_XE?select * from test1 where trim(some_char) <> some_char;
    SOME_CHAR
    HI
    1 row selected.
    Elapsed: 00:00:00.14
    [pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to identify the program in which an enhanncement spot should be included?

    How to identify the program in which an enhanncement spot should be included? For example I want to validate VA02 for USER authorization. So an enhancement spot should be written in program MV45AFZB. How do you identify this program ?

    It depends on where you need to place your modification, the enhancement will be assigned to main program,
    if you need to place in an include used by several program you need to make sure which main program is used by your transaction.
    In the case of MV45AFZB, the main program is SAPMV45A, but it's easy as this include is used only there,
    Max

  • How to identify the bill-to-site location for a customer

    Hi All,
    How to identify the bill-to-site location for a customer.
    I want to determine the language output of the AR invoice report based on the bill-to site address.
    If the bill-to site is located in Sweden, the document should be in Swedish. If the bill-to site is located outside of Sweden, the document should be in English.
    I have defined a query but not able to identify from which column I can identify the bill-site-location.
    select --a_bill.org_id,party_name,account_number,a_bill.CUST_ACCT_SITE_ID
    from
    apps.hz_parties party
    ,apps.hz_party_sites party_site
    ,apps.hz_cust_accounts b
    ,apps.hz_cust_acct_sites_All a_bill,
    apps.hz_locations loc,
    apps.hz_cust_site_uses_all u_bill,
    apps.ra_customer_trx_all trx
    where party.party_id=party_site.party_id
    AND a_bill.party_site_id = party_site.party_site_id
    AND b.party_id = party.party_id
    AND loc.location_id = party_site.location_id
    AND u_bill.cust_acct_site_id = a_bill.cust_acct_site_id
    AND trx.bill_to_customer_id = b.cust_account_id
    AND trx.bill_to_site_use_id = u_bill.site_use_id
    Thanks,
    Joohi

    Hi ,
    Check this apps.hz_cust_site_uses_all here site_use_code will be there , you can find Bill_To Ship_to , from there you can find the site_use_id and location Id
    Thanks
    Shagul

  • How to identify the system generated program for any standrd extraction?

    Hi all,
    How to identify the standard program generated for any extraction takes place. Is there any tcode to figure out the standard abap prgms for the datasource.
    for instance:
    for the data source : 2LIS_02_SCL what is the standard extractor program used.
    Thanks
    Pooja

    Hi hemanyt,
    i cant find the table RSTRAN active.
    Thanks
    Pooja

  • How to identify the DDL changes ?

    Hi all,
    How to identify the DDL changes done to the database ?
    By triggers only Or we can use Logminer also OR
    SELECT * FROM USER_OBJECTS where object_type = 'TABLE' order by LAST_DDL_TIME desc;
    OR
    is there any other options are available ?
    Thanks in advance,
    Pal

    Something from asktom might help
    tkyte@TKYTE816> create or replace trigger ddl_trigger
    2 after create or alter or drop on SCHEMA
    3 declare
    4 l_sysevent varchar2(25);
    5 l_extra varchar2(4000);
    6 begin
    7 select ora_sysevent into l_sysevent from dual;
    8
    9 if ( l_sysevent in ('DROP','CREATE') )
    10 then
    11 if l_sysevent = 'CREATE'
    12 then
    13 begin
    14 select 'storage ( initial ' || initial_extent ||
    15 ' next ' || next_extent || ' .... )'
    into l_extra
    16 from all_tables
    where table_name = ora_dict_obj_name
    17 and owner = user;
    18 exception
    19 when no_data_found then null;
    20 end;
    21 end if;
    22
    23 insert into log
    24 select ora_sysevent, ora_dict_obj_owner,
    25 ora_dict_obj_name, l_extra
    26 from dual;
    27 elsif ( l_sysevent = 'ALTER' )
    28 then
    29 insert into log
    30 select ora_sysevent, ora_dict_obj_owner,
    31 ora_dict_obj_name, sql_text
    32 from v$open_cursor
    33 where upper(sql_text) like 'ALTER%' ||
    34 ora_dict_obj_name || '%'
    35 and sid = ( select sid
    36 from v$session
    37 where audsid=userenv('sessionid') );
    38 end if;
    39 end;
    40 /

  • IMP: How to delete the service order

    Hey Experts,
    Can you tell me how to delete the service order which was created in IW31..? or we have any Functions Module to delete the service order?
    and one more question is I have more than 100 service order in the table ,but it will display only 50 order when i execute this Functions Module BAPI_ALM_ORDERHEAD_GET_LIST
    can you tell me how to solve this problem...?
    Thanking you in advance,
    Regards
    J Sarathi

    This is what the BAPI_ALM_ORDERHEAD_GET_LIST documentation says
    "You can use this method to determine a list of orders according to a list of selection criteria. The number of hits that are produced for the person calling up the list, can be specifically reduced; without further parameter transfers, the first 50 hits are displayed. A complete list of the hits is stored internally. If you call up the selection again within a Logical Unit of Work (LUW) without changing the selection parameters, but with other refurbishment parameters, then you receive further partial quantities of the selection result, as specified by you."
    and for deletion
    check whether you can set any deletion status through the fm BAPI_ALM_ORDER_MAINTAIN
    Also check the business objects BUS2007, BUS2088

  • How to identify the user who created the variant

    Hi All,
    Can anyone tell me how to identify the user who created the variant ?

    Hi Dear,
    For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
    From this table u can know which user created the variant. Hope this solve your purpose.
    Regards

  • How can identify the default currency for a customer?

    How can identify the default currency for a customer?
    I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
    Blue

    Hi Gary,
    As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
    If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash

  • How to stop the services provided by net80 and oracle9i

    how to stop the services provided by net80 and oracle9i during the installation of forms6i & reports6i in windows 2003 server

    Go into the control panel and choose services ... stop the services.

  • How to configure the services(WDA) in ESS with EHP7

    Hi Experts,
    I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with  EHP7.currently we are using
    ECC6.0  EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
    How to configure the service in launch pad with WDA.please guide me the step by step procedure.
    Please share the config guide if anyone have.

    hi sap scn ,
    Tips & Recommendations for customizing ESS Menu (WD ABAP) -   ess launchpad
    Summary of configuration options in ESS Personal Information scenario  -personal information
    go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
    if any other revert back again 

  • How to identify the type of pocketpc barcode scanner?

    How to identify the type of pocketpc barcode scanner whteher it is intermec or symbol?
    GS

    Hi,
    well, this is the brand of the PDA - the Scanner itself is build into the device. So if you have an intermec device - you have an intermec scanner and vice versa. It is not recommended to use a HP device for example with an external scanner. This scenario is not really supported by the MI setup guides.
    Hope that helps!
    Regards,
    Oliver

Maybe you are looking for