How to implement a service that runs once a day?

Hi all,
is there a service or so available that waits for example 24 hours and runs every day for example at 9:00 am?
I know there is the Wait service with the scheduleWait operation, but I can only specify days, hours or minutes. So I can not use this service to specify a time when to run. How is this possible?
Thanks in advance!
Paul

Design your process somewhat similar to the above model.
Invoke your process (only one time) at 9 AM.
This is the simplest solutions. The other way is to write a custom DSC.
Nith

Similar Messages

How to implement sheduling services in Ep

Hi all,
I would like to know how to implement scheduling services in ep in the sense .. running jobs in portal .
Any pointers to this would be of great help.
Thanks& Regards,
Uma,

Hi Uma,
If you have not already done so, try the following weblog by Prakash.
<b>Did you know you can schedule jobs in portal using KM's Scheduler Task?>
Hope this helps you
Ranjith

Oracle BI Enterprise Edition - How to implement "Scheduling Services"

hi,
Currently doing some analysis of OBIEE for project specification doc.
Please help me for the below need.
1. How to implement "Scheduling Services" in OBIEE , terms of;
a.Integration with 3rd party schedulers
b.Job management
c.Job scheduling
d.Notifications
reg,kannan
Edited by: user4810433 on Nov 13, 2008 8:59 PM

hi,
try this below links
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/delivers/delivers.htm
http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots/
Regards
Naresh
Edited by: Naresh Meda on Nov 13, 2008 9:03 PM

I want the do not disturb service make 5 once a day because i want pray 5 timeslike 11:00 to 11:15 and 4:00 to 4:15 etc

i want the do not disturb service make 5 once a day because i want pray 5 timeslike 11:00 to 11:15 and 4:00 to 4:15 etc

Go here and tell Apple you want the scheduled (automated) Do Not Disturb feature to be expanded and include your example.
@vdub: Under Settings > Notifications > Do Not Disturb you can automate Do Not Disturb.

How to write a program that runs on a port like a deamon or service?

hi,
how to write a program in java that runs on a port like a deamon or service, accepts requests from client, process the request and gives responce.
for ex. tomcat runs on 8080 port as deamon or service.
is it socket programming? if yes please give me a simple program which runs on a specific port.
ex. a program running on a port talking two integers and return the total.
thanks and regards,
moses.

I suggest you read
[http://java.sun.com/docs/books/tutorial/networking/sockets/clientServer.html]
For more
[http://www.google.co.uk/search?q=serversocket+tutorial]

How to schedule a service to run before network goes down

Hi
I wrote a new smf service and added it to the repository.
When running with "stop" (when the system goes down) it sends an alert to another machine.
My question is :
How can I schedule that service to run just before network services go down?
another question, how can I schedule another service to run just BEFORE system is getting down?
Many Thanks
--me2unix

Dependencies appear to be really written and tested on the boot side, but they should work properly going down as well.
My first assumption is that you'd make a dependency on the network for your service. So it should be started after the network starts, and will wait for your service to quit before trying to shut down the network.
Now this would only apply to normal shutdowns. Also, there are mulitple services on the box that have network affects. You may need to read through several to understand their purpose and interaction to pick the correct one for your use. Probably the milestone/network will be the best choice.
Darren

How to implement singleton service if i m using only jar and war component

hello,
in my application i m using only jar and war component .
as i m not using EAR for deployment so i dont have weblogic-application.xml file.
so in this case how i implement weblogic singleton service .and how to call active method

From the documentation:
After you have created a singleton service class using the SingletonService interface, you must define it as a singleton service within WebLogic Server. This singleton service object contains the following information:
The path to the class to load as the singleton service.
The preferred server and other candidate servers for the singleton service.
The following excerpt from the cluster element of config.xml shows how a singleton service is defined:
<singleton-service>
<name>SingletonTestServiceName</name>
<user-preferred-server>myManaged1</user-preferred-server>
<class-name>mycompany.myprogram.subpackage.SingletonTestServiceImpl</class-name>
<cluster>myCluster</cluster>
</singleton-service>
Note that the config.xml is located in the <domain-home>/config directory

How to create pl/sql that run efficiently in background ?

Hi sql gurus,
We have application on Oracle 10g where 150+users (from multiple branch) concurrently input transaction. The transaction number is centralized, means all user use same transaction number counter.
To avoid the contention that occured, we think of using pl/sql procedure that run in background to do :
- select transaction that not yet has number
- query the last transaction number counter(a column in a table), increment by 1, update the transaction with the number
- commit
- process another transaction
What is the best approach to do this ?
(means a pl/sql that does not cause high CPU utilization, because it will run all day long)
Thank you,
xtanto

Hi,
Why can't you give them a number upon creationCurrently we doit this way, and this cause contention. thats why we think of separate the numbering process.
Fyi we donot use Sequence ( for gapless numbering).
We maintain the number counter in a column in a separate table. It is the update to this table that cause contention.
Oracle sequences are typically used for meaningless number generation. Yes, We dont use sequence.
Thank you
xtanto

How to implement web service client timeout

I'm trying to implement a web service client using JAX-RPC specification and the client is generated by clientgen utility. We are using weblogic8.1(sp5).
How do I control the connection timeout and data transmission timeout? I have tried:
BindingInfo.setTimeout() method and stub._setProperty("weblogic.webservice.rpc.timeoutsecs", "1" /* secs */);
and they don't seem to be working...
I have searched the web service documentation and didn't found any mentioning on this. Can someone shred some light on this?
Thanks.
Ren
null

Hi,
I had a problem too for setting the timeout of a webservice client. but i didn't find any thing on this.
But there is a work around for this see if it suits you but for this you have to use Apache AXIS webservice api to generate the client in that Api you have the Stub.timeOut() function to over come this problem
Cheers !!
Vivek:-)

ACE: How to implement multiple services on a pair of servers

We plan to loadbalance two mail servers which offer several services like http, imap and pop3. Those services are independent from each other.
Our idea is to use an own serverfarm for each service, something like that :
probe http http-probe
probe imap imap-probe
probe pop3 pop3-probe
serverfarm host http-farm
predictor leastconns
probe http-probe
rserver server1
inservice
rserver server2
inservice
serverfarm host imap-farm
predictor leastconns
probe imap-probe
rserver server1
inservice
rserver server2
inservice
serverfarm host pop3-farm
predictor leastconns
probe pop3-probe
rserver server1
inservice
rserver server2
inservice
Is that approach meaningful at all ?
Can we use a common vip for all serverfarms or do we have to assign a unique vip for each farm ?
How do we distinguish between the different requests ?
Has somebody a sample configuration for that ?
Thank you very much in advance.

If the 3 services run on the same port, using different serverfarm does not make sense just because the problem would be different.
If they run on different ports, then you have the distinction that you need to split the config.
Gilles.

How to create a schedule to run once?

I am having some problems getting a schedule to run only once. If I leave the repeat_interval empty, the schedule does not run at all. The documentation explains all the options for setting the repeat frequency, but it does not explain how to run it only once at a set time/date. I have created a user interface to allow the users to create their own schedules and I'd rather not do something like a "yearly" interval with an end date of next week. I need the generic solution.
Any ideas?

Hi Ravi,
Thanks for your reply!
I have just discovered something very interesting! best explained by example:
(I might log an SR through metalink too. I'll be sure to update this thread with the outcome...)
I create 3 schedules and 3 simple jobs:
schedule 1 - start_date in 2 minutes time (eg. 11:30:00), repeat_interval => null
schedule 2 - start_date in 2 minutes, 20 seconds time (eg. 11:30:20), repeat_interval => 'FREQ=DAILY'
schedule 3 - start_date in 2 minutes, 40 seconds time (eg. 11:30:40), repeat_interval => null
jobs 1, 2 and 3 just insert a row into a table through a PL/SQL block.
My test results are as follows:
1. The first time these schedules are created only schedule 2 runs. Schedules 1 and 3 never run.
2. I drop and re-create all schedules and jobs, (adjusting the time to a few minutes in the future) and re-submit the schedules and jobs and they all run. I can continue this as many times as I like now and the repeat_interval of null will now work fine.
3. re-start the 10gR2 database.
4. re-create the schedules and jobs and only schedule 2 runs again. Schedules 1 and 3 never run. (I'm back at step 1!! I can reproduce this problem anytime by following these steps)
My script is below:
declare
start_datetime__w timestamp(3) with time zone;
repeat_interval__w varchar2(200);
begin
* REPEAT INTERVAL NULL TEST
* TIM_SCHED_2_1 - no repeat interval
* TIM_SCHED_2_2 - a repeat interval
* TIM_SCHED_2_3 - no repeat interval (identical to TIM_SCHED_2_1)
* Results on my 10gR2 database (Redhat Enterprise Linux 4.4) are:
* job 2 will always run
* jobs 1 and 3 will only run after the successful run of job2 AND jobs 1 and 3 have been re-created
* Why?
* It seems the scheduler needs a wakeup call!!!
* test table: create table tim (col1 varchar2(30), col2 date);
-- Cleanup previous jobs:
--dbms_scheduler.drop_job      (job_name      => 'TIM_JOB_2_1');
--dbms_scheduler.drop_schedule (schedule_name => 'TIM_SCHED_2_1');
--dbms_scheduler.drop_job      (job_name      => 'TIM_JOB_2_2');
--dbms_scheduler.drop_schedule (schedule_name => 'TIM_SCHED_2_2');
--dbms_scheduler.drop_job      (job_name      => 'TIM_JOB_2_3');
--dbms_scheduler.drop_schedule (schedule_name => 'TIM_SCHED_2_3');
repeat_interval__w := 'FREQ=DAILY';
-- create schedule TIM_SCHED_2_1, repeat_interval__w = null
start_datetime__w := '27-FEB-2007 11:34:00.000 AM +10:00';
dbms_scheduler.create_schedule (schedule_name => 'TIM_SCHED_2_1',
start_date => start_datetime__w,
repeat_interval => null,
end_date => null,
comments => 'schedule created at '||to_char(sysdate,'DD-MON-YYYY HH24:MI:SS'));
-- create schedule TIM_SCHED_2_2, with a repeat_interval set
start_datetime__w := '27-FEB-2007 11:34:20.000 AM +10:00';
dbms_scheduler.create_schedule (schedule_name => 'TIM_SCHED_2_2',
start_date => start_datetime__w,
repeat_interval => repeat_interval__w,
end_date => null,
comments => 'schedule created at '||to_char(sysdate,'DD-MON-YYYY HH24:MI:SS'));
-- create schedule TIM_SCHED_2_3, repeat_interval__w = null (SCHEDULE IDENTICAL TO TIM_SCHED_2_1)
start_datetime__w := '27-FEB-2007 11:34:40.000 AM +10:00';
dbms_scheduler.create_schedule (schedule_name => 'TIM_SCHED_2_3',
start_date => start_datetime__w,
repeat_interval => null,
end_date => null,
comments => 'schedule created at '||to_char(sysdate,'DD-MON-YYYY HH24:MI:SS'));
-- create jobs
dbms_scheduler.create_job (job_name => 'TIM_JOB_2_1',
schedule_name => 'TIM_SCHED_2_1',
job_type => 'PLSQL_BLOCK',
job_action => 'begin '||
'insert into tim values (''TIM_JOB_2_1'', sysdate); '||
'commit; '||
'end;',
number_of_arguments => 0,
enabled => TRUE,
comments => 'job created at '||to_char(sysdate,'DD-MON-YY HH24:MI:SS'));
dbms_scheduler.create_job (job_name => 'TIM_JOB_2_2',
schedule_name => 'TIM_SCHED_2_2',
job_type => 'PLSQL_BLOCK',
job_action => 'begin '||
'insert into tim values (''TIM_JOB_2_2'', sysdate); '||
'commit; '||
'end;',
number_of_arguments => 0,
enabled => TRUE,
comments => 'job created at '||to_char(sysdate,'DD-MON-YY HH24:MI:SS'));
dbms_scheduler.create_job (job_name => 'TIM_JOB_2_3',
schedule_name => 'TIM_SCHED_2_3',
job_type => 'PLSQL_BLOCK',
job_action => 'begin '||
'insert into tim values (''TIM_JOB_2_3'', sysdate); '||
'commit; '||
'end;',
number_of_arguments => 0,
enabled => TRUE,
comments => 'job created at '||to_char(sysdate,'DD-MON-YY HH24:MI:SS'));
end;
Cheers,
Tim.

How to reset OpenLDAP service that was marked for deletion

Hi,
I installed the Shared Services, Essbase and Planning in my PC. After installing it, I went to services screen. I found that OpenLDAP service was in 'Started' and 'Disabled' status. When I try to change the status of the service from 'Disabled' to 'Automatic' or 'Manual', I am getting an error 'The specified service has been marked for deletion'. If I tried to stop the service, the service is vanishing from services list. I am consistently facing this issue even if I tried to reinstall all the modules. Can any one tell me how can I resolve this issue?
Thanks in advance,
Chandu

Hi,
I take it that after it has been marked for deletion and you reboot then the service is removed?
I am not sure what version you are on but for 9.3.1 to create the OpenLdap service again,
open a cmd prompt to directory
*\Hyperion\SharedServices\9.3.1\openLDAP*
and type :-
slapd.exe install OpenLDAP-slapd "Hyperion S9 OpenLDAP"
Cheers
John
http://john-goodwin.blogspot.com/

How do I get programs to run once I've installed them??

when I download something, it goes to the "allow" buttone, then the install now, then the" firefox must be restarted.. then when it restarts, it's back at the "allow" button and I do it all over.. and again it's back at the "allow" button... please help

Hi there. It's pretty much as I described, a very simple, one action workflow. I will attempt to post a picture.
/Users/stevo/Desktop/Workflow.png
It's Rename Finder Items
Add Date or Time
Date/Time: Modified
Where: After name
Separator: Underscore
Format: Month Day Year
Separator: Dash
Use Leading Zeros: checked
I think the problem is that as soon as the item is renamed in the folder, that counts as a modification date change (or a "new item being added" and so it just re-runs on the "new" item.
This particular Action has never given me what I wanted. It doesn't accept variables, so I can't use it to add short user name as a suffix to a renamed file. Seems like Automator wants me to rename it and THEN move it to a folder, but in that case I can't get the folder to be watched and trigger the rename.
I believe I'm S.O.L. on this one, but if anyone has a solution, I'm all ears.

How do you update python that runs through terminal?

I cant find how to update the python provided (2.6) to python 3. Is it possible?

http://www.python.org/download/mac/
and
http://www.python.org/download/releases/3.1.2/
I don't see if specific versions have specific OS requirements. Don't forget there are two main OS releases after Tiger and the latest on that site could require those. I know with Java if you want to have the latest then you have to upgrade OS.
Personally I'd make sure I had a solid backup of my whole drive before doing this.

How to handle HTTPS Service that returns XML

When using Flash + AMF remoting I've always typecast the event.result as XML(event.result). Typecasting isn't working in Flash Builder, I'm getting an object as the result [object MYXMLROOT] and I can access it's properties, but I can't typecast it as XML, nor can I loop each of it's properties....

Hi,
There are ways to use XML returned by Http Service in flex. Is this what you are looking to achieve?
http://blog.flexexamples.com/2008/03/29/dynamically-loading-xml-files-using-the-httpservic e-tag/
The DCD features of Flash Builder 4 can also be used to access the XML as Services.
Nishad

How to implement a service that runs once a day?

Similar Messages

Maybe you are looking for