How To Implement CDC in ODI

Hi Experts,
Could you please guide me how to implement CDC in ODI.
I am new to CDC. I have basic knowledge of ODI.
Please let me know the steps/Process/Document which will be helpful to achieve CDC.
Cheers,
Andy

Hi Andy,
As per you asked,adding some more link to Rathish's reply,
You can get some videos which talk about CDC from,
http://www.oracle.com/technology/products/oracle-data-integrator/webcasts/odi-webcasts/odi-webcast-archives.html
In the above link there are 2 webcasts which is all about CDC. Have a look and let us know if you need more help.
PS: I suggest you to bookmark that link, once in a month 2 webcasts will be uploaded.
Thanks,
G

Similar Messages

How to implement cdc when there are 2 source tbls to populate one trge tb

I am new to ODI and trying to implement CDC. Using Oracle 10g as source and 11g as target. For one to one source and target all works fine. Problem arises then I try to use two tables as source joined by PK-FK and one TRGT table.
In the interface itself we can check Journalize data only for one table so the change in other tables can not be transfered to target Table. The option for the other table gets grayed out.
Following are the steps I am performing.
1. Set the Model to Simple journalizing and selecting JKM oracle simple
2. Adding both source tables to CDC by right clicking on source tables
3. Starting Journal by right clicking on source tables.
Creating an interface with both journalized tables as source and mapping them to target table. However we can only check JOURNALIZED DATA ONLY option for one table. Now if I go back and make changes to both than tables. One the source marked as JOURNALIZED DATA ONLY changes get posted.
How can we make changes made to table not marked as JOURNALIZED DATA ONLY be posted to target table.
Thanks

Please let me know if following are correct steps to implement what your mentioned
1. To change to consistant model ==> double click the moel and chage from simple to consistant mode
2. Add subscriber to the model
3. Select the two datastore that need to be jounalized. Add them to CDC by right clicking the datastore and then start journals.
4. Arrange the data store. Reference tabel (parent comes first). child(with foreign key comes second). This is done on model level. do we also need to change the numbe shows like 0 for parent and 1 for child
4. Create the interface.
5. Drag target tables. (contains columns from both tables and has inital load in it). perform mapping.
6. Drag both source tables perform join(cant leave one table as join is required). Check jounalize data only for one table. Create another interface and now mark other source table as journalize data only.
Call both inerfaces in Package and execute package.
Please correct if I am wrong
Thanks

How to implement this logic in odi

suposse my table is like this
a b c
1234 01-JAN-09 0
1234 02-JAN-09 1
1234 05-JAN-09 1
1244 06-JAN-09 1
1234 10-JAN-09 0
1234 13-JAN-09 1
1234 25-JAN-09 0
1234 27-JAN-09 1
1234 30-JAN-09 1
1235 01-JAN-09 1
1235 02-JAN-09 0
1235 05-JAN-09 1
1245 06-JAN-09 1
1235 10-JAN-09 1
1235 13-JAN-09 3
1235 25-JAN-09 2
1235 27-JAN-09 0
1235 30-JAN-09 0
i want out put like this
a b c
1234 01-JAN-09 0
1234 02-JAN-09 1
1234 05-JAN-09 2
1244 06-JAN-09 3
1234 10-JAN-09 3
1234 13-JAN-09 4
1234 25-JAN-09 4
1234 27-JAN-09 5
1234 30-JAN-09 6
1235 01-JAN-09 1
1235 02-JAN-09 1
1235 05-JAN-09 2
1245 06-JAN-09 3
1235 10-JAN-09 4
1235 13-JAN-09 7
1235 25-JAN-09 9
1235 27-JAN-09 9
1235 30-JAN-09 9
to get out put like that iam using this query
select a,b,sum(c) over(partition by a order by b) from table.
how to implement "sum(c) over(partition by a order by b)" in odi interface mappings

Hi
if you don't want to aggregate try to define a user function
analytic_sum($(value))
implémented by
sum($(value))
after that
replace your
sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
by
analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

How to implement this aggregate logic at target column in odi inteface mapp

sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
how to implement this aggregate logic at target column in odi inteface mappings

Hi
if you don't want to aggregate try to define a user function
analytic_sum($(value))
implémented by
sum($(value))
after that
replace your
sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
by
analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

How to Implement Hireachical Queries in ODI?

Hello All,
Please let me know how to implement Hierarchical Queries in ODI 11.1.1.6.?
Pls provide any example if possible.
Thanks
Ravikiran

there is no native way to use hierarchical queries.
you will have to modify KM
It depends on your exact needs.

How to implement Inline Views in ODI?

Hi,
How to implement the following query (inline view) in ODI?
Query:
SELECT *
FROM Table_one t1,
(SELECT * FROM Table_two (includes some where conditions) t2
WHERE conditions;
How to set the conditions at the table level (not at the interface level) i.e., How to set the conditions used in Sub Query Table_two in ODI?
Thanks in Advance,
-Vency

there is no native way to use hierarchical queries.
you will have to modify KM
It depends on your exact needs.

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

How to Implement BW in IT Service Desk/IT Help Desk /IT Complain Surveillance Dept/IT Customer Support Dept?

Hi
If a organization have 200 to 300 daily complains of there IT equipment/Software/Network e.t.c.
How to Implement BW in IT Service Desk/IT Help Desk /IT Complain Surveillance Dept/IT Customer Support Dept?
Is there any standard DataSources/InfoObjects/DSOs/InfoCubes etc. available in SAP BI Content?

Imran,
The point I think was to ensure that you knew exactly what was required. A customer service desk can have many interpretations from a BI perspective.
You could have :
1. Operational reports - calls attended per shift , Average number of calls per person , Seasonality in the calls coming in etc
2. Analytic views - Utilization of resources , Average call time and trending , customer satisfaction , average wait time
3. Strategic - Call volumes corresponding to campaigns etc , Employee churn and related call times
Based on these you would then have to construct your models which would be populated by data from the MySQL instance for you to report.
Else if you have BWA you could have data discovery instead or if you have HANA - you could do even more and if you have a HANA sidecar - you technically dont need BW. The possibilities are virtually endless - it depends on how you want to drive it and how the end user ( client ) sees value in the same.

How to implement implicit and explicit enhancement points

Hi,
Can anybody please provide some technical aspects of enhancement spots. I have gone through several sap sites and help poratl but have not get much technical things (how to implement or related t codes). please do not provide link to read theories.
Rgds
sudhanshu

Hi,
Refer to this link...
http://help.sap.com/saphelp_nw2004s/helpdata/en/5f/103a4280da9923e10000000a155106/content.htm

How many types of authentications in sharepoint and how to implement those authentication in sharepoint?

Hi All,
How many types of authentications in sharepoint and how to implement those authentication in sharepoint?
can any one explain the above things with examples?
Thanks in Advance!

In addition to
A Sai Gunaranjan you can also check this URL for Sharepoint 2010:
http://technet.microsoft.com/en-us/library/cc288475(v=office.14).aspx
http://www.codeproject.com/Tips/382312/SharePoint-2010-Form-Based-Authentication
***If my post is answer for your query please mark as answer***
***If my answer is helpful please vote***

How to Implement custom share functionality in SharePoint 2013 document Lib programmatically?

Hi,
I have created custom action for Share functionality in document library.
On Share action i'm showing Model pop up with Share form with addition functionality.
I am developing custom share functionality because there is some addition functionality related to this.
How to Implement custom share functionality in SharePoint 2013 document Lib pro-grammatically?
Regards,
- Siddhehswar

Hi Siddhehswar:
I would suggest that you use the
Ribbon. Because this is a flexible way for SharePoint. In my project experience, I always suggest my customers to use it. In the feature, if my customers have customization about permission then i can accomplish this as soon
as possible. Simple put, I utilize this perfect mechanism to resolve our complex project requirement. Maybe we customize Upload/ Edit/ Modify/ Barcode/ Send mail etc... For example:
We customize <Edit> Ribbon. As shown below.
When user click <Edit Item>, the system will
render customized pop up window.
Will

Can't Figure Out How To Implement IEnumerable T

I have no problem implementing IEnumerable but can't figure out how to implement IEnumerable<T>. Using the non-generic ArrayList, I have this code:
class PeopleCollection : IEnumerable
ArrayList people = new ArrayList();
public PeopleCollection() { }
public IEnumerator GetEnumerator()
return people.GetEnumerator();
class Program
static void Main(string[] args)
PeopleCollection collection = new PeopleCollection();
foreach (Person p in collection)
Console.WriteLine(p);
I'm trying to do the same thing (using a List<Person> as the member variable instead of ArrayList) but get compile errors involving improper return types on my GetEnumerator() method. I start out with this:
class PeopleCollection : IEnumerable<Person>
List<Person> myPeople = new List<Person>();
public PeopleCollection() { }
public IEnumerator<Person> GetEnumerator()
throw new NotImplementedException();
IEnumerator IEnumerable.GetEnumerator()
throw new NotImplementedException();
class Program
static void Main(string[] args)
// Create a PeopleCollection object.
PeopleCollection peopleCollection = new PeopleCollection();
// Iterate over the collection.
foreach (Person p in peopleCollection)
Console.WriteLine(p);
Console.ReadLine();
That code compiles (basically because I haven't really done anything yet), but I get compile errors when I try to implement the GetEnumerator() methods.

The List<T> class implements the IEnumerable<T> interface, so your enumerator can return the GetEnumerator call from the list.
class PeopleCollection : IEnumerable<Person>
List<Person> myPeople = new List<Person>();
public PeopleCollection() { }
public IEnumerator<Person> GetEnumerator()
return myPeople.GetEnumerator();
IEnumerator IEnumerable.GetEnumerator()
return myPeople.GetEnumerator();
class Program
static void Main(string[] args)
// Create a PeopleCollection object.
PeopleCollection peopleCollection = new PeopleCollection();
// Iterate over the collection.
foreach (Person p in peopleCollection)
Console.WriteLine(p);
Console.ReadLine();

How to implement Tool TIP in Table Control

Hello Everyone,
Can you please tell me how to implement a tooltip messages in table control columns.
The Tooltip contains a simple message like "Doublde click on column.
Thanks in advance.
Edited by: Suruchi Razdan on Jun 6, 2011 7:57 AM

Hello,
In table Control->first Header Row has chance to maintain the Tooltip option.
In table control columns maintain Double click options in attributes .
Regards,
Praveen

How to implement a java class in my form .

Hi All ,
I'm trying to create a Button or a Bean Area Item and Implement a class to it on the ( IMPLEMENTATION CLASS ) property such as ( oracle.forms.demos.RoundedButton ) class . but it doesn't work ... please tell me how to implement such a class to my button .
Thanx a lot for your help.
AIN
null

hi [email protected]
tell me my friend .. how can i extend
the standard Forms button in Java ? ... what is the tool for that ... can you explain more please .. or can you give me a full example ... i don't have any expereience on that .. i'm waiting for your reply .
Thanx a lot for your cooperation .
Ali
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
Henrik, the Java importer lets you call Java classes on the app server side - I think what Ali is trying to do is integrate on the client side.
If you want to add your own button then if you extend the standard Forms button in Java and then use this class name in the implementation class property then the Java for your button will be used instead of the standard Forms button. And since it has extended the basic Forms button it has all the standard button functionality.
There is a white paper on OTN about this and we have created a new white paper which will be out in a couple of months (I think).
Regards
Grant Ronald<HR></BLOCKQUOTE>
null

How to implement a file system in my app?

How to implement a file system in my app? So that we can connect to my iPhone via Finder->Go->Connect to Server. And my iPhone will show as a shared disk. Any ideas about it? Thanks.

Hi Rain--
From webdav.org:
DAV-E is a WebDAV client for iPhone, with free and full versions. It provides remote file browsing via WebDAV, and can be used to upload pictures taken with the iPhone.
http://greenbytes.de/dav-e.html
http://www.greenbytes.de/tech/webdav/
Hope this helps.

How To Implement CDC in ODI

Similar Messages

Maybe you are looking for