How to implement Filewatcher process using ODI

Hi,
I need to build an ODI package that will check for a specific file in a specific directory after specific time intervals i.e. it will be a filewatcher process.
My operating system in WINDOWS 7.Could you please let me know how to achieve this.
Regards,
Rashmik

Implement OdiFileWait.
Refer below link for more details.
http://gerardnico.com/doc/odi/webhelp/en/ref_tools/snpsfilewait.html
Bhabani
http://dwteam.in

Similar Messages

How to Implement Hireachical Queries in ODI?

Hello All,
Please let me know how to implement Hierarchical Queries in ODI 11.1.1.6.?
Pls provide any example if possible.
Thanks
Ravikiran

there is no native way to use hierarchical queries.
you will have to modify KM
It depends on your exact needs.

Help!!! How to implement a special useful button in tool bar?

How to implement a special useful button in tool bar, when the button is clicked, then a menu shows under the button, just like the Internet Explorer's back button and forward button, there is a black arrow at the two buttons right, when click the black arrow, a menu shows under the back button or forward button, how to implement this in java?
Please help!!!
Thanks!!!

Like an enhanced JComboBox?
;o)
V.V.

Explain how to implement prompt functionality using @variable

Hi all,
Anyone please explain how to implement prompt functionality using @variable.
We got some sql reports.Those reports have to be converted into BO free hand sql report.
Please provide any best practices for converting sql reports into BO free hand SQL.
Thanks & Regards,
James Charle

Hi
Please refer "@Variable" section in page number 601, in http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_designer_en.pdf
Regards
Ashwini

How to implement route cipher using java?

Hi guys,,,
I really got a headache solving how to implement route cipher using java lang,,i already got the concept but i really dont get how to implement it using java actually i want to make a presentation of how route cipher works using "adobe flash" but first i will implement it using java coz flash actionscripts are closer to java lang.
Hope you could post some examples or ideas...i would really appreciate it!
thank you so much...

just add an action listener (either keypressed or keytyped) to the frame that you want to record. I did this in NetBeans in about 2 seconds. I can simplify it if you need. As for loging it just write the characters to a file output stream.
public class test extends javax.swing.JFrame {
    /** Creates new form test */
    public test() {
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        addKeyListener(new java.awt.event.KeyAdapter() {
            public void keyTyped(java.awt.event.KeyEvent evt) {
                formKeyTyped(evt);
        pack();
    // </editor-fold>
    private void formKeyTyped(java.awt.event.KeyEvent evt) {
        System.out.println(evt.getKeyChar());
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new test().setVisible(true);
    // Variables declaration - do not modify
    // End of variables declaration
}

How to implement this logic in odi

suposse my table is like this
a b c
1234 01-JAN-09 0
1234 02-JAN-09 1
1234 05-JAN-09 1
1244 06-JAN-09 1
1234 10-JAN-09 0
1234 13-JAN-09 1
1234 25-JAN-09 0
1234 27-JAN-09 1
1234 30-JAN-09 1
1235 01-JAN-09 1
1235 02-JAN-09 0
1235 05-JAN-09 1
1245 06-JAN-09 1
1235 10-JAN-09 1
1235 13-JAN-09 3
1235 25-JAN-09 2
1235 27-JAN-09 0
1235 30-JAN-09 0
i want out put like this
a b c
1234 01-JAN-09 0
1234 02-JAN-09 1
1234 05-JAN-09 2
1244 06-JAN-09 3
1234 10-JAN-09 3
1234 13-JAN-09 4
1234 25-JAN-09 4
1234 27-JAN-09 5
1234 30-JAN-09 6
1235 01-JAN-09 1
1235 02-JAN-09 1
1235 05-JAN-09 2
1245 06-JAN-09 3
1235 10-JAN-09 4
1235 13-JAN-09 7
1235 25-JAN-09 9
1235 27-JAN-09 9
1235 30-JAN-09 9
to get out put like that iam using this query
select a,b,sum(c) over(partition by a order by b) from table.
how to implement "sum(c) over(partition by a order by b)" in odi interface mappings

Hi
if you don't want to aggregate try to define a user function
analytic_sum($(value))
implémented by
sum($(value))
after that
replace your
sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)
by
analytic_sum(NOTICES) over ( partition by property order by RELAVANTDATE range between interval '30' day preceding and current row)

How to implement Inline Views in ODI?

Hi,
How to implement the following query (inline view) in ODI?
Query:
SELECT *
FROM Table_one t1,
(SELECT * FROM Table_two (includes some where conditions) t2
WHERE conditions;
How to set the conditions at the table level (not at the interface level) i.e., How to set the conditions used in Sub Query Table_two in ODI?
Thanks in Advance,
-Vency

there is no native way to use hierarchical queries.
you will have to modify KM
It depends on your exact needs.

How to implement wafer mapping using LabVIEW?

Hello LabVIEW Masters!
I am having an incoming project which includes controlling and gathering information from a PROBER. One of the difficulties I am having now is how to implement a WAFER MAP using LabVIEW. According to my customer requirements, the wafer element ranges from 6k to 23k. I guess doing all the element (one die = one led ctl/indicator) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have better idea on how to this?
Please, I badly need your help..
Thanks and Regards,
Dennis DG
Solved!
Go to Solution.

Hi Dennis,
Is it okay if you send to me the working VI also?
No, it's not ok. I made that program for my customer...
As I am not too familiar in using intensity graph.
That's no reason to hand over programs for free...
My customer also request me that if the cursor hover on the wafer map, he wants the x,y corrdinates to be displayed.
I also have such a feature. Did you notice the little yellow cursor near the center of the wafer? One could easily change that to use a MouseMove event instead...
He also wants to select some elements in the wafer map and come up with the coordinate values to do some testing.
That's related to the cursor thing...
Some points:
- You have a customer that pays you. Why should I offer work for free?
- You can send me contact dates of your customer, I will make him an offer...
- When you take an job to provide software you should be able to code the software...
- The VI(s) are now some years old. I didn't code so well back those days and don't want to hand out those VIs as they are right now.
- I included some "license management" deep inside that program, I would have to remove this and spend time on testing afterwards...
- The VIs are based on the PROBER output format used by the customer. All the file handling has to be changed for/by you...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to implement Oracle DWH using JDBC

Hello,
i'm new to the Oracle database and i'm wondering how to implement a DWH Core or Datamart System using Oracle 11g Express. How can i "switch" a relational oracle database to a dimensional one, preparing it for OLAP/BI queries´, preferably using the JDBC interface ?
Thanks a lot!

An good introduction to Oracle OLAP is found on the OTN site: Oracle OLAP.
--Ken Chin

XML Processing using ODI

I need to to persist data from xml to Oracle database ? Is it possible using ODI .I dont need to transform the data , I need to actually load it from xml as it is into the RDBMS tables which already exists using ODI , is it possible ? If possible how can I do that ?

Am I correct in assuming that you want to load the XML string into your database and not the values contained within the XML structure?
So if you had:
<parent>
<child>
<value1>1</value1>
<value2>2</value2>
</child>
</parent>
You would want the entire string rather than values 1 and 2 from the <value1> and <value2> nodes?
G

How to read I$ table using ODI procedure

Hi
Can any one help me how to drop a I$ table from out sie of interface.
I have tried below approches but no luck
I have created ODI procedure with technology oracle and target logical schema (I$ tables are creating on target DB) with and with out begin and end;
Approch 1:
Given below code in ODi procedure
drop table <%=odiRef.getTable("L", "INT_NAME", "W")%> <% if (new Integer(odiRef.getOption( "COMPATIBLE" )).intValue() >= 10 ) { out.print( "purge" ); }; %>
Approch 2:
drop table I$_<%=odiRef.getTable("L", "TARG_NAME", "A") %>;
Approch 3:
drop table <%=odiRef.getTable("L", "INT_NAME", "W")%> (but it is fetching target dtabase schema anme not I$ table)
Please help me any other alternative way to drop a I$ table, more over this code should be unique for all interface
Regards,
Phanikanth

Thanks bhabani,
Actaul my requirement is some time my scenario is stoping due some issue at Merge Rows Step (I am using IKM Oracle Incremental Update(Merge) KM) when the next iteration starts it is thwoing and error at create flow table I$ step and error is table name is already exists, so i am doing is if the interface went failed I am storing those information in one table using ODI procedure (INF--ko-->ODI procedure) in same ODI procedure I want to call a I$ table to drop.
Can you please provide the steps so it will very useful for me using Java variable.
I have gievn a step as below on create I$ table step (after create I$ statement)
<@ java.lang.String Idollertable = <%=odiRef.getTable("L", "INT_NAME", "W")%> ; @>
I am calling Idollertable variable in ODI procedure which is ko>* of INF as <@=Idollertable@>
Note: I have followed below approch
ODI Procedure Code:
drop table <@=Idollertable@>; --> *2nd approch*
begin
insert into ODI_EXECUTION_ERROR_DETAILS
(SESSION_NO,
SCENARIO_NAME,
CONTEXT_NAME,
ERR_MESSAGE,
INSERT_COUNT,
ERROR_COUNT)
values
<%=snpRef.getSession("SESS_NO")%>,
'<%=odiRef.getPrevStepLog("STEP_NAME")%>',
'<%=odiRef.getContext( "CTX_NAME" )%>',
'<%=odiRef.getPrevStepLog("MESSAGE")%>',
'<%=odiRef.getPrevStepLog("INSERT_COUNT")%>',
'<%=odiRef.getPrevStepLog("ERROR_COUNT")%>'
commit;
drop table <@=Idollertable@>; --> * first approch *
end;
Please help me
Regards,
Phanikanth
Edited by: Phanikanth on Mar 3, 2013 9:52 PM
Edited by: Phanikanth on Mar 3, 2013 9:52 PM

How to invoke BPEL process using Oracle Business Event System (BES)?

Hi,
I want to invoke a BPEL process using Business Events and Subscriptions (Oracle BES/Workflow). If anyone knows how this can be done, please reply to this thread. You can also mail me at [email protected]
Thanks,
Gaurav.

yeah you are 100% correct ..
I have attached some stuff for CDH integration, where we used plsql to send out info on a created record to a queue.
CREATE OR REPLACE
TYPE XXBPEL_MESSAGE_TYPE AS OBJECT (
MSG_ID VARCHAR2(128),
INREPLYTO_MSG_ID VARCHAR2(128),
FROM_PARTY VARCHAR2(512),
TO_PARTY VARCHAR2(512),
ACTION_NAME VARCHAR2(512),
MSG_TYPE INT,
PAYLOAD CLOB,
ATTACHMENT BLOB
EXECUTE DBMS_AQADM.create_queue_table (queue_table => 'XXBPEL_QTAB',queue_payload_type => 'XXBPEL_MESSAGE_TYPE',multiple_consumers => TRUE);
EXECUTE DBMS_AQADM.create_queue (queue_name => 'XXBPEL_OUT_QUEUE',queue_table => 'XXBPEL_QTAB');
EXECUTE DBMS_AQADM.start_queue(queue_name => 'XXBPEL_OUT_QUEUE',dequeue => TRUE,enqueue => TRUE);
On BPEL side creata a process that listens to this queue (with and AQ partnerlink) as shown in $BPEL_HOME/integration\orabpel\samples\tutorials\124.AQAdapter\MulticonsumerInbound
thx clemens

How to implement schedule workflow using SharePoint Designer?

Hi All,
Please let me know , How to implement the schedule workflow using Share Point Designer.
Thank You.
Regards,
~Sri

+1 to this. The closest that you'll get with list / level features is using Information Rights. You can trigger workflows based on time/date columns, which may serve your needs.
Failing that, you will indeed need a custom timer job.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to execute .sql file using ODI

Hi All,
I need to execute .sql file using ODI.
I tried @{path}{file} command in ODI procedure selecting oracle technology.but it is failing.
Do any one have any other idea to execute .sql file.
Thanks in advance

Ohk...I think you can try creating batch file(.bat) if its Windows & call that from ODIOSCommand.
The bat file should contain scripts which call .sql file using sqlplus & there you can use @{path}{file} format.
See if this helps.
Regards,
Santy

How to implement health monitor using GRMG?

Hi,
I want to configure the health monitor of a big-ip (F5) load balancer, so that it does only forward requests to a netweaver cluster node, if that is fully up and running (incl. KM, Portal and WebDynpro). The big-ip can only send simple (unauthenticated) http get requests and parse the response for a contained string. I thought, GRMG's heartbeat would be a good approach to do this. I can't find any documentation or examples on how to use GRMG without CCMS. Is there some API to send GRMG requests and process the results? How does an GRMG request look like, exactly?
Best Regards,
Jörg

Finally I found the answer in [Enabling Generic Request and Message Generator Heartbeat Monitoring|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a3a190-0201-0010-4984-b4fd369bb35f]. A GRMG request is a HTTP POST request that contains the XML section of a scenario from the curresponding grmg-customizing.xml file, which is for example:
<scenario>
     <scenname>Demo</scenname>
     <scenversion>010</scenversion>
     <sceninst>100</sceninst>
     <component>
          <compname>TestWeb</compname>
          <compversion>001</compversion>
          <property>
               <propname>url</propname>
               <propvalue>http://...</propvalue>
          </property>
     </component>
</scenario>

How to implement Filewatcher process using ODI

Similar Messages

Maybe you are looking for