How to implement multiple queues in one circular buffer?

Spoiler (Highlight to read)
Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
However, there is only one circular buffer allowed in one project for one data type.
I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?

LawrenceChong wrote:
Spoiler (Highlight to read)
Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
However, there is only one circular buffer allowed in one project for one data type.
I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?
THe last time I wrote a multi-subscriber cirular buffer was in LV 6. Since then I have found that polymorphic queues perform much better so I now use multiple queues. One queue for each subscriber of the data. The subscribers are then responsible for maintaining their own histories.
So just use multiple queues.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to execute multiple queries in one stored procedure.

Hi,
I am Kumar,
How to execute multiple queries in one stored procedure.
here is the my requirements,
1. get the max value from one table and sum of the that value.
2. insert the values and also sum of the max value.
using stored procedure
I am using SQL server 2000 database.
Please help me.
Advance thanks
by,
Kumar

This is not a java question and it is not even a problem: your only problem is
1) lack of knowledge
2) lack of interest to find a manual
But you are going to have to change both by actually reading a book or a manual that explains the stored procedure language of SQL Server. It is the same as Sybase I think, so you could also look for a manual for that DBMS.

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

How to scan multiple pages in one file

I would like to know how to scan multiple pages into one file. There is no add button that comes up. I have a HP Officejet 8600 and a macbook pro. Please help, this would really help me out.

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

Hp printer f4488 HOW TO SCAN MULTIPLE SHEET IN ONE ATTACHMENT

hp printer f4488 HOW TO SCAN MULTIPLE SHEET IN ONE ATTACHMENT Kindly suggest if any solution are their for above subject..

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

Could you please tell me how to implement many companys in one Group?

Dear All,
I have one question how to implement many companys in one Group about FI,Could you pls give me some advice,thank you very much .

Hi
Suppose that you want to create a Company , Reliance Group of Companies(RGI) and Company codes Reliance Infocomm(REL1) and Reliance Petrochemicals(REL2).
Go to OX15----->Define Company
IMG--->Enterprise Structure-->Definition-->Financial Accounting---->Define Company
Here you will create RGI as Company.
Go to OX02----->Define Company Code
IMG--->Enterprise Structure-->Definition-->Financial Accounting---->Edit,Copy,Delete,Check Company Code.
Here you will create REL1 and REL2 as Company codes.
Go to OX16------>Assign Company Code to Company
IMG---->Enterprise Structure--->Assignment-->Financial Accounting---->Assign Company Code to company.
Here you will assign Company to both the Company Codes.
Regards
Venkat

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

How to implement Multiple Roadmap step with in a roadMap

Hi,
I am trying to implement Multiple roadmap step with in a roadMap.Can any one help me on this how to do it.
As of now i have added Multiple roadmap step element with in my Road map navigation and assign a data source which contains single attribute steps. I am stuck here open question like
1) How i map the view accordingly with the steps that are dynamically created
2) Weather i have to create dynamic plugs? to handle it
Can any one help me out or if you have any sample implementation please guide me through that link.
Thanks in advance.
Regards,
Karthikeyan R

Hi,
1. In the View add a RoadMapUI element.
2. Right click->Insert Steps (as many as required)
3. Set the design property of the Roadmap step as standard / selected (Highlighted if set to "Selected")
This is for a static approach i.e if there are 3 views, then in all the three views u repeat the procedure above and set the property as Selected for the required step.
For dynamic selection of roadmap, bind the design property to context attribute of type WDRoadMapDesign and set the property thru code.
Hope this helps you.
Regards,
Poojith MV

How to delete Multiple Artists in one action?

Hi,
I want to do a big clean up on an iTunes library with over 4000 albums.
How can I delete multiple Artists in one action?
It looks like I can only delete 1 Artist at a time, and then this action shoots me to the top of the list. Which is a pain then having to scroll back down through such a huge list to then delete the others one at a time... each time being shot back to the top of the list.
For example I have the following artists;
The Alarm 01 – 1 song
The Alarm 02 – 1 song
The Alarm 03 – 1 song
The Alarm 04 – 1 song
The Alarm 05 – 1 song
The Alarm 06 – 1 song
And I want to delete them all in 1 action.
Can this be done? How best to do it?
Thanks in advance,
Dave

You can't delete "artists" - just songs (or songs grouped into albums). When iTunes displays the library or a playlist in Artists view it is doing so using the metadata values set in the relevant songs. If you're looking at this view:
then your selections in the left pane - the artists list - is filtering what you see on the right. When you select Delete via the keyboard or via a right-click operation, you are initiating an operation to delete the songs by that artist. To delete songs by more than one artist in a single operation you'll need to select and delete in Albums view:
or in Songs view:
where you can also use the Column Browser to filter songs by multiple artists:

How to associate multiple sites on one standard instance?

I have multiple websites that I want to put on one Standard instance. When I click on the scale link for a given website - it doesn't give me the option to add other websites to the standard instance. It creates a new instance for each website which really
racks up the billing charges. How do you put multiple websites on one standard instance?

The sites were already created and were under the standard instance. I thought it was just running one instance until I saw the credit balance going down quick. When I checked the websites using the new portal - they are actually under 4 web hosting plans.
I changed them back to the free one. Now when I try to change the plan to standard for a website - only that website's plan is changed. The other do not. There is no option for me to put the others in the same instance.

How to print multiple addresses on one sheet of avery labs using Pages?

How do I print mulitple addresses on one sheet of avery labels?
I used Numbers to make a database.
I used Pages to use the Avery label template.
I formatted the labels for the database but it shows my first sheet of labels as my first addressee and my second sheet as the second addressee. I want multiple addresses on one sheet of labels!!

What version of Photoshop do you have? Is it the full version or elements? What OS do you have and it's version?

How to update multiple rows in one query using php

i am new to this can any one help me how to update multiple rows at a time i am doing an school attendance page

Often the situation is such that you have multiple courses across a range of dates.So students may take more than one course, and you need to track attendance for each course date. The following graphic demonstrates this:
In such a situation, you need four database tables as follows:
students (student_id, student_name, etc.)
courses (course_id, course_name, etc.)
students_courses (student_id, course_id)
attendance (student_id, course_id, dater)
A fifth table may also be needed to define the dates of courses, but you may also be able to build this array programmatically by using PHP's robust date functions, which can give you, for instance, all the Tuesdays and Thursdays between a start date and end date.
The students_courses table simply keeps track of which students are taking which courses, so it has just two columns for the primary keys of both of the main tables. The attendance table is similar, but it also includes a date field. The following view of the attendance table demonstrates this:
So if David's solution does cover your needs, consider yourself lucky, because this could quickly grow from a beginner-appropriate project to a moderately advanced one.

How to implement multiple queues in one circular buffer?

Similar Messages

Maybe you are looking for