How to implement XI interfaces in online and offline modes?

Hi Everybody,
Can you please tell me how to implement XI interfaces in online and offline modes?
thanks a lot,
Ramya Shenoy.

Hi,
Are you looking for Push and Pull mechanism of PI?
When the adapters like SOAP, HTTP, IDOC, etc. send the data to PI , it is nothing but a push mechanism, and hence the communication is synchronous by default.
But adapters like JDBC, File, etc. they fetch the data from Source Applications, so it is a kind of Pull mechanism for PI, and
by default communication is asynchrnous.
Pls elaborate exactly what are you looking for?
Regards,
Supriya.

Similar Messages

How to implements two interface?

i have a applet to implement two interface,the actionlistener and the appletcontext.how to do it??
Thank You!

with a comma

Error is in example "How to Create Online and Offline Forms in Web Dynpro"

Hi,
I am developing " How to Create Online and Offline Forms in Web Dynpro " in nwds 7.0. This is standard example which is available at sdn. but when i run it gives me error like "
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.travelrequestapp.TravelRequestComView.wdDoInit(TravelRequestComView.java:97)
    at com.travelrequestapp.wdp.InternalTravelRequestComView.wdDoInit(InternalTravelRequestComView.java:133)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
    ... 34 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:41:58[UTC], changelist=413534, host=pwdfm101), build date: Thu Feb 15 10:23:57 IST 2007
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en_US
Time of Failure Mon Oct 29 12:13:24 IST 2007 (Java Time: 1193640204484)
Web Dynpro Code Generation Infos
local/TravelRequest
SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:59:42[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates (unknown)
SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:48:59[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:05:10[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:49:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:49:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-14:14:57:39[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:02:09[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0006.20060111154644.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:18:33[UTC], changelist=384368, host=pwdfm101)
SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:05:21[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0006.20060111154644.0000 (release=645_VAL_REL, buildtime=2006-01-14:15:18:33[UTC], changelist=384368, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.travelrequestapp.TravelRequestComView.wdDoInit(TravelRequestComView.java:97)
     at com.travelrequestapp.wdp.InternalTravelRequestComView.wdDoInit(InternalTravelRequestComView.java:133)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:793)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
So please help me to correct this error .....
Help will be rewarded.
Regards,
Gurprit Bhatia

Hi Gurprit,
A null value is being passed at runtime. Make sure that you enter values when filling in the form.
Also check for the cardinality of the nodes being used. You can also initiliaze your value attributes as follows:
In wdDoInit() method:
wdContext.currentNodeAElement.setValueA("");
Context is as follows:
RootNode
|____NodeA
        |_____ValueA
Hope it helps.

How can i reserve an iPhone6 online,and get it at a real store

how can i reserve an iPhone6 online,and get it at a real store? thank you.

If the option appears when you order the iPad from your Apple Online Store then you will have the option. Otherwise, they will ship it directly to you for free.
It seems the option is not available in Hongkong, but call them to be sure:

How i can change the arabic date and time mode to english date and time mode

how i can change the arabic date and time mode to english number mode

Settings app > General > International > Region format.

Wut mean by online and offline option in OBIEE Administration?

Hello Dears ,
any one cane told the difference of online and offline option to open a repository in oracle BI Administration?
Regards
shakeel khan

OBIEE Administration can be done in two modes
1) Offline
2) Online
Offline: Where most of the developement work is done and repository is not loaded in to the server
Online: Repository is loaded in to server and few modifications are done.
When the services are started( Bi Server and Presentation Server) the repository is loaded in to the server and when try to open the repository in Offline mode it open in Read only mode.

Using both power saving mode and offline mode caus...

So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
Any help?
Rob
PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
I believe it is a firmware bug that causes this problem.

How to implement FCoE interface on OL 6.3

Hi everybody,
I try to enable FCoE on a server with Oracle Linux 6.3 but I have some troubles...
The server is an UCS C240-M3 with an UCS 1225 VIC (Virtual Interface Card). Per default, my Linux has set 6 network interfaces with DHCP (eth0 -> eth5). It corresponds to a 4 Gigabit PCI card + 2 Virtual NIC from the VIC 1225 adapter. The VIC 1225 is supposed to be used for Networking and FCoE, thanks to VLANs.
Linux displays two FCoE devices with lspci:
[root@localhost /]# lspci | grep -i fcoe
0d:00.0 Fibre Channel: Cisco Systems Inc VIC FCoE HBA (rev a2)
0e:00.0 Fibre Channel: Cisco Systems Inc VIC FCoE HBA (rev a2)
And it appears that drivers are well installed:
[root@localhost ~]$ dmesg | grep fnic
fnic: Cisco FCoE HBA Driver, ver 1.5.0.1
fnic 0000:0d:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
fnic 0000:0d:00.0: setting latency timer to 64
fnic 0000:0d:00.0: irq 75 for MSI/MSI-X
fnic 0000:0d:00.0: irq 76 for MSI/MSI-X
fnic 0000:0d:00.0: irq 77 for MSI/MSI-X
fnic 0000:0d:00.0: irq 78 for MSI/MSI-X
scsi1 : fnic
fnic 0000:0e:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
fnic 0000:0e:00.0: setting latency timer to 64
fnic 0000:0e:00.0: irq 79 for MSI/MSI-X
fnic 0000:0e:00.0: irq 80 for MSI/MSI-X
fnic 0000:0e:00.0: irq 81 for MSI/MSI-X
fnic 0000:0e:00.0: irq 82 for MSI/MSI-X
scsi2 : fnic
How can I enable FCoE on my Linux ? I found some help on the Internet, and examples show how to use ethN interface etc.... I don't know how we habitually identify the interface (eth*) to use with FCoE. Is the FCoE interface considered as a "network" interface by Linux, and generates a script in /etc/sysconfig/network-script ? Am I supposed to see additional interfaces (eth6 and eth7) and use it for FCoE ?
Thanks

Ok but in my case, even if the physical Cisco card is a CNA device (it is plugged with a link to the FCoE switch, and a link to the Ethernet network), the Operating System doesn't see such a device since we have configured on the UCS :
- Two virtual interfaces for Ethernet traffic
- Two virtual interfaces for FCoE traffic
Here we have the same behavior as a virtual machine, when it is connected to virtual devices. For the operating system, the two virtual devices configured on UCS side for FCoE are seen as physical dedicated FCoE devices.
So I don't need to configure an ethX device for both Ethernet and FCoE, because both FCoE and Ethernet traffic are separated.

How recognize if you are working online or offline

How an application programmatically find if it is working online
(you started from the browser so you have a connection for sure)
or if you are working offline(started from the local webstart center)?
best regards
AT

There is no way to really tell if you are online of offline. you can try the api: BasicService.isOffline(),
but this will allways return false unless you set the Application Manager to offline mode, and then
launch the app from there. Then it will run javaws -offline ... which will return true from isOffline().

Is there a limit to how many songs you can have on the offline mode?

I am trying to get all my albums to sync with my phone and be available offline but It keeps on saying that I have selected too many tracks for the offline mode. Is there a limit to how many songs you can have?Thanks :)

Spotify applies a limit of 3,333 tracks but everything is dependent on your phones on-board memory
as Spotify actually copies the tracks to it so you don't need internet connection.
My Galaxy S2 has 11 odd GB and I filled it with 1800 tracks (albeit some were 20 - 30 mins).
Also check if you use on-board memory for photos etc. 'cos Spotify will use a lot of it.
I have asked them to look at this and maybe give warnings about Spotify's memory usage rather
than the number of tracks.

How can I prevent Firefox from starting in Offline Mode when there is no internet connection?

Hey!
When I fire up my laptop from standby it takes some time before the wireless internet connection is established. If i am too quick and open Firefox before that happens, it automatically goes into Offline Mode, which I hate a lot.
Is there any way to disable this behaviour?
I have already tried everything mentioned here: [http://superuser.com/questions/208146/can-firefoxs-offline-mode-be-disabled http://superuser.com/questions/208146/can-firefoxs-offline-mode-be-disabled]
Also I found this addon, which unfortunately does not work with Firefox 11: [https://addons.mozilla.org/de/firefox/addon/disable-automatic-offline-mana/ https://addons.mozilla.org/de/firefox/addon/disable-automatic-offline-mana/]

That shouldn't happen in Firefox 4 or later. You should just get a page not found or server not found message.
Can you check the following setting?
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''offline''' and pause while the list is filtered
(3) Look for '''network.manage-offline-status''' and reset it to False (either double-click or right-click/reset).
Does that work?

How to implement BINDING between drawing shapes and properties?

See this background info:
Can we have BINDING between drawing shapes and properties?
This needs more specific info. My application reads a number of XML files, and places the data in an Excel worksheet. Let's say that there are 20 XML files, the app creates 20 lower tabs (spreadsheets) named: "Item 1", "Item 2", ...,
"Item 20".
That is the current version. I am told by the users, however, that in some cases there are some XML files which create more than 1 Excel lower tab. For example, the file: "Items 8-11.xml" needs to fill tabs 8, 9, 10 and 11.
In that particular case the user will modify the default map (a 45-degree diagonal, equivalent to the
identity function F(x) = x), by clicking around. The resulting new map will look as follows:
Since the number of XML files does not change, the number of rows is constant. However, each time a black square is moved from its canonical (45-degree) location, a spreadsheet becomes "orphan" and therefore the application must create a new Excel
lower tab (which is a grid column). IOW: The number of columns keeps on growing to the right.
List<Model>
I figure that (as opposed to DataGrids which grow and shrink vertically, which each Model being 1 row) this thing should use the column as fundamental Model.
Before running the main app (the XML file reading procedures), the user will select a menu item named "Configure XML to Excel Mapping" and an interface similar to the image above will be shown.
In addition to the property binding, which has been discussed, how should I implement the drawing and erasing of black and white squares? I guess I will need some sort of "ConvertTo" bidirectional bridge from/to boolean and square drawing?

You lost me with the xml file and the tab and the wossname to the thingummybob.
I don't follow the explanation, sorry.
The way to show stuff like that isn't dependent on how the data is stored where though.
I probably wouldn't draw them, as such.
I'd probably just make each a usercontrol which bound the fill brush of a rectangle for the black white bit and used a border for the outline.
To simplify that:
<Grid> <Border>
<Rectangle Fill={Binding FillBrush}"/>
</Border>
</Grid>
FillBrush
Would be a public property solidcolorbrush exposed from your cellvm
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Media;
using GalaSoft.MvvmLight;
namespace wpf3
public class CellVM : ViewModelBase
private SolidColorBrush fillBrush;
public SolidColorBrush FillBrush
get { return fillBrush; }
set
fillBrush = value;
RaisePropertyChanged();
You can then have some logic somewhere which tells that viewmodel to show black or white fill. Which would be that converter bridge thingy equivalent. This thing is true then FillBrush = whiteBrush else FillBrush = blackBrush.
You could probably do it with just rectangle, lose the border and set the Stroke on the rectangle.
The stroke is the outside line round a rectangle ( or any shape).
https://msdn.microsoft.com/en-us/library/system.windows.shapes.shape.stroke(v=vs.110).aspx
And you would of course do other stuff like sizing the usercontrol and arranging an list in a list as I explained in your other thread.
Oh.................
But to answer the question in the title.
Yes you can bind all sorts of things including the point making up a polygon, brush used to draw the line and all sorts. You could even do flashing cells if you wanted.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How do I take iweb files online and fix it on a new iweb software

my computer crashed and had to get a new harddrive and lost everything. I'm trying to fix my website with the new iweb application that I had to reinstall. Is that possible? If not, how can I edit my website?

The online files cannot be opened in iWeb — only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb. You can manually back up the Domain file, or use Backup to back it up.
Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html

How to implement hierarchical structure of managers and reportees using jdeveloper adf

I want to display hierarchical structure(which can be expanded and compressed) with 3 columns(Employeeid, fist Name,lastname) of managers and his reportees on selecting a top level manager.
In this i'm going to use programmatic view objects.
I have employees table.
Here is my detailed requirement:
On selecting a user from drop down list, i want to display the list of users reporting to him.
From the displayed list on selecting a manager, list of users reporting to him has to be displayed in a tree format with the correspoding just being listed below the current selected manager
Example :
Top Manger has been selected from dropdown and clicked submit.
Output(a table as mentioned below):
Manager1
Manager2
NonManager1
Manger 3
On clicking manager1,
output:
Manger 1
Manger11
Manasger12
Nonmanager11
Manger 2
NonManger1
Manger3
on clicking manager1 again, tree has to be compressed and the output has to be just the same as first output.
Please help me on this by sharing information or any references on how can i achieve this implementation using Jdeveloper adf concepts.
Will be waiting for the inputs.
Thank You,
Dev

Obviously, you can only display one picture. So then the question becomes which picture to show. Therefore, you will have to create some sort of preference of one pattern over another.
I would use a FOR loop so that you can loop through your available patters and their possible results. Use the Conditional Terminal on the FOR loop so that you can stop the loop on the first match. Then you just wire up the selected value for the ring outside of the loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to implement class interfaces

Hi all,
We are getting the below error message
Error message is Interfacemethod "IF_EX_LE_SHP_DELIVERY_PROC~SAVE_AND_PUBLISH_BEFORE has not yet been implemented".
Could somebody tell me how can i implement a class interface.
Class interface: ZCL_IM_ATP_WM
Appreicate your help.

Hi,
while double clicking on the method IF_EX_LE_SHP_DELIVERY_PROC~SAVE_AND_PUBLISH_
BEFORE
Error message is Interfacemethod "IF_EX_LE_SHP_DELIVERY_PROC~SAVE_AND_PUBLISH_BEFORE has not yet been implemented".
It is not opening to write my code.
Any suggestion.
Thank you
Mamatha

How to implement XI interfaces in online and offline modes?

Similar Messages

Maybe you are looking for