How To Import From Dump File

Dear All
How Are You ?
I have a dump file i and i need to import this dump file in my database this dump file consist of the database structure
So how can i import this dump file in my blank database
Note:- I am using Database Oracle 10 g
Ramez S. Sawires

Hi,
If you have original export dump file then you have to choice 1.using impdp through OEM. or using original imp utility.
Regards
Taj

Similar Messages

  • Problem in data import from dump file on NAS device

    I am using oracle 10g on solaris 10. I have mounted NAS device on my solaris machine.
    I have created a directory object dir on my NAS storage in which i have placed the dump file.
    Now when i execute the following command to import data
    impdp user/pass DIRECTORY=DIR DUMPFILE=MQA.DMP logfile=import.log
    then i get the following error message
    ORA-39002: invalid operation
    ORA-39070: Unable to open the log file.
    ORA-29283: invalid file operation
    ORA-06512: at "SYS.UTL_FILE", line 475
    ORA-29283: invalid file operation
    Can any body help ?

    Also, Datapump from NAS device would perform slow.
    Take a look at this:
    10gR2 "database backup" to nfs mounted dir results in ORA-27054 NFS error
    Note:356508.1 - NFS Changes In 10gR2 Slow Performance (RMAN, Export, Datapump) From Metalink.

  • How to import from desktop (file) avchd in FCE4.0.1

    I copied from a camera onto my macbook avchd footage for later use in FCE4.
    I used the importcommand log and transfer.
    I have three maps; DCIM (empty), MISC (AUTPRINT.MRK) and PRIVATE with a lot of files.
    I tried all the maps (or files in it) to drag into L&transfer but that does not work.
    I am sure I am doing something wrong. How to import avchd footage in FCE?
    Thanks!
    Bruce.

    Read the section in the manual on log and transfer. Once again you can NOT drag and drop to the log and transfer window.
    If the application is crashing you have more serious problems.
    Do NOT go inside the folder structure of the SD card. Select the top level of the folder structure. If that crashes the application, you should take your computer to an Apple service technician.
    I'm assuming the the operating system was correctly installed, and the application was correctly installed from the disc in the Applications folder.

  • How to import from CSV file into INTERVAL DAY TO SECOND column?

    Hello,
    I need to import data from a csv file that has a column that stores time-intervals (e.g. 2:06:02 Hours:Minutes:Seconds) into a table column INTERVAL DAY TO SECOND.
    Does any of you know what format I should apply?
    I tried HH:MI:SS but it didn't work.
    Any suggestion is welcomed (including changing the column type to something else that might hold time-intervals in it....).
    Thanks,
    Andrei

    Andrei,
    There is no native support for the INTERVAL datatype in the Text loading facilities of Application Express.
    To work around this known limitation, I suggest either creating a temporary table or a shadow column in your existing table. You could then upload your data for the interval as a VARCHAR2 and then use SQL to convert to an appropriate interval value.
    For example:
    1) Create a table with:
    create table foo (id number primary key, i interval day to second, shadowi varchar2(4000) )2) Using your sample data set, load this data into table FOO, loading the second column of this data into column SHADOWI
    1     01:06:02
    2     02:06:02
    3     03:01:013) Issue the following SQL to convert the value in your shadow interval column to your actual interval column
    update foo set i = to_dsinterval( '0 ' || shadowi )Note that you'll need to prepend the '0' to formulate a valid interval literal value.
    Joel

  • How to import a dump file

    Hi all,
    I Have a file with .dmp extension and I want to import it in oracle10g express edition. I am using impdp command to import the file but it is saying unknown command starting with impdp
    Somebody Please help me.
    Thank you,
    Idrush.

    If you are running Windows:
    Try to give full path name of executable with something like
    D:\oracleXE\app\oracle\product\10.2.0\server\BIN\impdpIf needed replace D: with the right drive letter.
    However, check your Windows system configuration: the PATH environment variable should have already have
    <drive>:\oracleXE\app\oracle\product\10.2.0\server\binIf your are running Linux, see http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/connecting.htm#CHDJBIAH
    Edited by: P. Forstmann on Jul 23, 2009 2:10 PM
    Edited by: P. Forstmann on Jul 23, 2009 2:13 PM

  • How to import a *.dmp file (exported from 10g) to 8i database?

    Hi everybody!
    Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
    I have tried but it seemed to be error "wrong version".
    Thanks a lot!

    From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
    import the data into the 8.1.7 database.
    Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
    Nicolas.

  • How to import SQLite .db file from AIR project

    hi friends..
    how to import SQLite.db file from AIR project. and i want use this in my application.
    after importing can i update and delete the recordS?

    There's no import needed. You just open it using the AIR SQL APIs. If this database file was created outside AIR, it's not necessarily compatible, though. There are SQLite features and extensions that aren't supported in AIR.

  • Error while importing a dump file in Oracle 10g R1

    Hi all,
    While trying to import a schema using Data Dump, I am facing the following issue -
    UDI-00018 - Import utility version can not be more recent than the Data Dump server.
    Following is the version information of the source and target DB and the utilities :
    Source DB server : 10.1.0.2.0
    Export utility : 10.1.0.2.0
    Import utility : 10.1.0.2.0
    Target DB server : 10.1.0.2.0
    Export utility : 10.2.0.1.0
    Import utility : 10.2.0.1.0
    I can figure out the cause for the problem, but don't know how to resolve it.
    Any help will be appreciated.
    Thanks in advance.
    Gitika Khurana

    How did you get thre DMP file created and how are you trying to import the dump file? Could you post the commands you're using, please?

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • I am getting an error ORA-39143 when importing a dump file

    I get ORA-39143: dump file "c:\oraload\expdat.dmp" may be an original export dump file
    when importing a dump file created by 9.2 exp into 10.2 database using impdp
    I need to use the impdp utility with the table_exists_action option which doesn't appear to exist in imp
    What is the proper mix of versions/flags/options to export from a 9.2 database and import into an existing 10.2 database while replacing existing data?
    thanks

    well its on the link i provided
    "When tables are manually created before data is imported, the CREATE TABLE statement in the export dump file will fail because the table already exists. To avoid this failure and continue loading data into the table, set the import parameter IGNORE=y. Otherwise, no data will be loaded into the table because of the table creation error."
    original import tries to append (insert)
    there is no parameter here like table_exists_action=truncate/replace
    1. drop all the tables (dynamic sql), so there will be no errors because of already existent tables
    or
    2. truncate all the tables (dynamic sql) + use IGNORE=Y
    (or
    3. drop the whole schema in target database, recreate it, then do the import)

  • "SP2-0734: unknown command..." error while importing a dump file

    hello,
    i want to import a dump file into my database named orcl, and i come accross the same error after executing the import command. my import command is:
    SQL> imp mvdemo/mvdemo file=mvdemo.dmp full=y ignore=y
    i use oracle 10g enterprise edition.
    i created the user mvdemo/mvdemo.
    the error i see in my screen is:
    SP2-0734: unknown command beginning "imp mvde..." - rest of line ignored.
    for a long period of time, i havent used oracle dbms. before, i remember that i used enterprise manager in import/export processes. however, i am not able to find the enterprise manager in 10g options now. do i have to install the enterprise manager seperately in oracle 10g enterprise edition? may this problem be relational with this matter?
    if someone could answer, i would be greatful.
    best regards

    Import is run from the command prompt, not the SQL prompt.

  • "Import from Text File" & "Upload from Clipboard" icon not appearng in F110

    Hi Experts,
    While making the payment to the vendors through TN F110, in "PARAMETER" screen just next to 'STATUS' screen, there is a vendor field for selection in range and just ahead of this there is an icon for multiple vendor selection ( Bold arrow mark ). If I click on that multiple vender selection icon ( on bold arrow mark ), an another screen opens for multiple selection for vendors. In this screen 'Enter, Copy, Delete etc' icons are appearing at the bottom of the screen but "Import from Text File" & "Upload from Clipboard" icon are not appearing there.
    Can you please let me know how to bring that icons there?
    Points would be awarded.
    Rgds,
    Shailesh

    Hi Ravi,
    I have not yet created anything and have just entered the parameter. In the multiple screen for vendors there are 5 fields for individual and 5 for range selection. Even you can put more than five range selections or individual selections by clicking on the page button but there I am not finding these two icons.
    Can you please check at your end and let me know if you are getting or what to do to bring those two icons in F110.
    Rgds,
    Shailesh

  • Importing From Flat File with Dynamic Columns

    HI
    I am using ssis 2008,i have folder in which I have Four(4) “.txt” files each file will have 2 columns(ID, NAME). I loaded 4
    files in one destination, but today I receive one more “.txt” file here we have 3 columns (ID, NAME, JOB) how can I get a message new column will receive in source. And how can I create in extra column in my destination table dynamically …please help me

    Hi Sasidhar,
    You need a Script Task to read the names and number of columns in the first row of the flat file each time and store it in a variable, then create a staging table dynamically based on this variable and modify the destination table definition if one ore more
    new columns need to be added, and then use the staging table to load the destination table. I am afraid there is no available working script for your scenario, and you need some .NET coding experience to achieve your goal. Here is an example you can refer
    to:
    http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/ 
    Regards,
    Mike Yin
    TechNet Community Support

  • Error importing from BIAR file (BO XI 3.0)

    Dear BO community,
    I am using the BIAR tool for backup purposes. For my backup, I use a properties file as input which looks like the one shown below:
    action=exportXML
    exportBiarLocation=C:/Temp/BOBackup.biar
    userName=Administrator
    password=XXX
    CMS=XXX:6400
    authentication=secEnterprise
    includeSecurity=true
    exportDependencies=true
    exportQuery1=select * from ci_infoobjects
    exportQuery2=select * from ci_systemobjects
    exportQuery3=select * from ci_appobjects
    exportQueriesTotal=3
    The file creation seems to work without any problems. A file is created. However, when importing the file into another CMS, I am getting the following error:
    Failed to open the BIAR file. Reason: com.businessobjects.sdk.biar.om.internal.iw.ObjectManagerIWException:Input/Output exception occurred: 'Couldn't find entry 'BusinessObjects.xml'.
    I have opened the BIAR file using a ZIP program and checked that there is no "businessobjects.xml" file in there. When creating BIARs using only a single query, this file exists and the import is no problem.
    Does anyone have an idea what's happening and can help me?
    Thank you and best regards!

    Hello ALL,
    I have the same problem when I am trying import from BIAR file. Please tell me how you resolved this issue.
    I did not understand much from your previous message.
    We are using BO XI R3.1 and below is the error message that Import Wizard is throwing.
    Failed to open the BIAR file. Reason: com.businessobjects.sdk.biar.om.internal.iw.ObjectManagerIWException:required dependencies not found target system : 'AWAS3XkMSEtGn1TXI370kAU'
    In both pc  BO version is boxir3.1 sp3 and currently i m using windows xp professional version 2002 sp3
    Thanks
    Saurabh shivam

  • How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?

    How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?

    MyTienN wrote:
    Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
    What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
    Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop.

Maybe you are looking for

  • Playlists for syncing no longer exist?!

    so yesterday i had an urge to finally download the newest version of itunes. everything went smoothly until it was complete. i noticed that all my songs on my ipod got deleted. when i tried to sync all my songs again, a message popped up: "Songs on t

  • Displaying the phone screen on a PC or a video

    Hi, I have implemented an application for a Nokia N70 mobile phone (graduation project). As i have to present my work, it would be surely very nice if all people attending the presentation can see a demonstration of the tool projected on the wall. Do

  • Synchronous does not work

    Hi, Export, I have a SOAP<--->XI proxy synchronous scenario. it is not working after we upgrade PI7.0 to PI 7.1. I can see soap message is coming over in monitoring. And I can see it does everything that is written in proxy. But it just does not send

  • When connecting IPOD to pc it doesnt recognize it said to try again nothing

    I bought my daughters the 7th generation IPOD nanos, when connecting to PC it said it doesnt recognize them, disconnect try again but it still does the same thing. Also we verified accts for yahoo and ITunes they have money in their acct's however wh

  • Iphone and TV color issue

    Why is the color on my Sony and Toshiba TV screen a different color than that on my iphone? Ex. Netflix screen is green instead of red on TV. I am using an Apple Component AV cable.