How to import the data again to owb

Hi Experts,
I took backup for owb data by going to Design--export---metadata wizard---export-----all the data with all dependency has been taken,
my question is how to restore the data again to the owb tool.
Please say me a good solution for this ASAP.
Thanks,
sen

If you want to Import the Exported OWB project just use Design--import choose the file location and while importing choose options replace metadata, match by physical names
Suresh

Similar Messages

How to import the data in a .xls or .xlsx file into a oracle database table

Hi,
Please tell me how to import the data in a .xls or .xlsx file into a oracle database table in Oracle 10gR2 using Oracle Warehouse Builder 10gR2.

....can we do something through Non-Oracle->ODBC?Yes, it is possible, look at this thread
[SQLServer access from AIX Warehouse builder|http://forums.oracle.com/forums/thread.jspa?messageID=2502982]
If your server (with target DB and OWB runtime) is on Windows OS this configuration will be simpler - you can use single server.
And additional link on OWB blog (with 11g transparent gateway)
[http://blogs.oracle.com/warehousebuilder/2008/01/11g_heterogeneous_agent.html]
(configuring nonoracle connection with 10g generic connectivity very similar to 11g gateway)
Also look at
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4406709207206#18830681837358
Regards,
Oleg

How to import the data to Data manager

Hi All,
I am new to MDM and need your help in handling the following issue
In our setup we are sending the Customer master data from R/3->XI->MDM (R/3-> XI IDOCs, XI->MDM XML files).
with the help of extraction job in R/3 IDOCs r generated and XI has onverted these IDOCs to XML Files and created at MDM Server. Now my Question is how to import the Data from these XML files to Data Manager !!!!
Note : Import Map settings are done already in the system.
Can any one help me the steps requeired to get this data to Data manager .
and am I need to do some activity in MDM to import the data to Data manager each and every time or is there any automatic way of doing this .
Please guide me.
Thanks in advance!

Hi MDM User,
Generally there are 2 cases while importing the data,
1) Initial Load
2) Delta Load
Initial Load means importing the data into MDM at first time.This is usually done by manual importing
without using import server.
Delta Load means importing the data into MDM when we have changes to existing data or added new data
to existing data.This is usually done by automatically using import server.
To manually import the data,just create a remote system and port in console and login into import manager
using remote system.Create ,save the map and execute the map.There is no other configurations needed.
To automatically import the data without manual intervention,we go for import server.
To let this happen we need to set some configuarations in mdis.ini file of import server.
Give the repository name,username and password which are set in console for that repository and also
give schedule time based on which import server picks the file from ready folder.
Go to the import manager , change the map and import action depends on your requriment and save that
map.
and also you need to set port type as inbound and automatic and select the map which you saved earlier in
MDM console.
As soon as we start the import server, it picks the file from ready folder of MDM server based on
configurations which we set in mdis.ini file and executes the map.
Here i am giving complete path of ready folder.
SAP MDM 5.5> Server>Distributions>bp1bocap080.bp.co_MSQL> BP3_PoC_Customer> Inbound>Siebel> SIEBEL_OB_CUS_SIEBELCUS01> Ready)
This path has to be given in target directory of receiver communication channel of XI so that it puts XML
file in the above path.
For better understanding,go through below blogs.
/people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
Hope it helps
Reward points,if found useful
Thanks
Narendra

How to import the data from a xml file to IDM

Hi all:
   I have read the document(/people/kare.indroy/blog/2008/01/14/sap-netweaver-identity-management-how-to-maintain-xml-files) ,but
cannot get the data when I click the insert template-->data source template menu.
The xml file as follows:
<?xml version="1.0" encoding="GB2312"?>
<users>
<user>
<name>CA_admin</name>
<password>123</password>
<role>caadmin</role>
</user>
<user>
<name>CA_user1</name>
<password>123</password>
<role>caadmin</role>
</user>
</users>
The xsl file as follows:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="users">
<xsl:element name="users">
                <xsl:for-each select="user">
                 <xsl:element name="user">
                  <xsl:element name="name">
                      <xsl:value-of select="name"/>
                  </xsl:element>
                  <xsl:element name="password">
                       <xsl:value-of select="password"/>
                  </xsl:element>
                  <xsl:element name="role">
                      <xsl:value-of select="role"/>
                  </xsl:element>
                  </xsl:element>
                </xsl:for-each>
                 </xsl:element>
</xsl:template>
</xsl:stylesheet>
Is there some thing wrong within my xsl file? Who can give me some points about this?
Is there some more information about this topic?
thanks in advanced.

Hello Shi,
Could you please provide details about how did you solve this problem?
Thanks,
Anuj

How to import the data into another Tablespace?

I have a Oracle user USER1 with default tablespace on "SYSTEM" tablespace.
I export utility to export user1's object with "exp" utility:
c:\orawin95\bin> exp userid=USER1/pwd file=DATA.dmp owner=user1
Now I upgrade my Hardware Server and reinstall Oracle, I created USER1 again but change default tablespace to "NewTS".
I use import utility to import data.dmp into user1 :
c:\orant\bin> imp userid=USER1/pwd file=DATA.dmp fromuser=USER1 touser=USER1
Question: Although I created USER1 with default tablespace "NewTS", but the imported data will still occupied on "SYSTEM" tablespace, How can I "move" the imported data to "NewTS"?

See
Considering user = USER1 and default tablespace for user1 is SYSTEM.
1. login to USER1
2. create script for all the tables with dynamic statement.
spool cr.sql
Select 'Create Table '||Table_name||' As Select * from '||user||'.'||table_name||';' from user_tables;
spool off
remove garbage lines from cr.sql
3. login in User2 ( where default table space is NEWTS )
SQL> @cr.sql
4. login to user1 drop all the tables from user1
login to system alter user user1 make default tablespace NEWTS
login to user2 run script in step 2 again.
login to user1 run cr.sql
login to user2 drop all the tables;
login to system drop user user2.
Hope this will solve your purpose
Thanks and Regards
Ripudaman

NULL error while importing the data

Hai everybody. In one of our branches there was some problem. To simulate the situation. i advised them to send the backupdata. While importing data from a dump file, i am getting the erro message
"cannot insert NULL into (“APGB5168”. “D010014”. “LBRCODE”)’.
Can i change the NULL constraint and import OR can i import first only the table strucuture and modify the constraint and can import the data afterwards.
Pl can any one suggest me how to import the data from this dump file so that i can simulate the situation.
Thanks - JayaDev(JD)

Hi,
It means you have NOT NULL column and you are trying to insert NULL data.
Can i change the NULL constraint and import OR can i import first only the table strucuture and modify the constraint and can import the data afterwards.It all depends on you and your business needs. If you are sure that removing the constraint will have no harm on your application and data then you can, but think why it has NOT NULL constraint if data has NULL values. Either your table data is incorrect or your table design. Rectify the problem and take action accordingly.
Cheers,
Avinash

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

HT1212 Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.

Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.

Thanks @ KiltedTim, but losing "only" any data is really not acceptable and, in this case, the phone had not been backed up, but thanks for taking the time. Also, yes, fungible means what I think it means. An iphone is a completely substitutible commodity, unlike my data, so instructions that inform me as to how to fix a phone I could replace for a small sum of money while failing to address the more important issue of the data are almost useless - they potentially save me the $99 it would cost me to replace the phone if I were so inclined to trust another apple product. Not worth the hour it took to find them or the 35 minutes on the phone to confirm my suspicions about the data.

How can i import the data from multiple sources into single rpd in obiee11g

how can i import the data from multiple sources into single rpd in obiee11g

Hi,
to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
tnx

How to import the JSON data that comes from REST API into Excel 2013?

HI,
Is there a way to import the JSON data that REST API returns into Excel 2013? If so how?
Could you please let me know this?
If you need to know any more info please let me know.
Thanks,
Vinay

I got this. We need to use power query add in for this.
EXCEL 2013 -> POWER QUERY -> From Web
Enter the URL for the REST end point and click ok. Power Query editor will show up with the URL and list of your data.
click on the list -> Right click->drill down
You will see the no of records the API returned.
Right Click on List in that table -> To Table and say ok in the next dialog.
On the displayed columns, there will be a double sided arrow, click on that and select the rows you want to import.
There you go. You will all the data.
Click on Apply and close. This will import the data into your excel file.

How do I import the data from Excel (.xls) file into Oracle Database table

I have an excel file with 5 columns of 5000 rows.
I have to import 5000 rows of data into my oracle table with
same column names & Data types.
What is the best advise for this ?
Thanks.
Srini

You can connect to Oracle from Excel directly. I know you can read data but am not sure if you can export data.
Other option is to import the data into Access.
Create an ODBC connection for Oracle
Use the to connect to Oracle from Access
Export data to Oracle from Access
Shakti
http://www.impact-sol.com
Developers of Guggi Oracle - Tool for DBAs and Developers

Getting error while importing the data using loadercli

Hello,
I want to copy the data using export/ import via (loadercli).
scenario:
1) I have 2 server and i want to export data from old server and import in to new MAXDB server using loadercli.
I have done this once and it went fine , but now I want to do the export import again so i will have te latest data on the new server.
when i tried to do that it gives error that the table already exist . Can i use loadercli to import hte data again ?
can any one help me in this ?
Regards,
Bhavesh

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

How to extract the cobol files into owb

Hi
How to extract the cobol files in owb,I am using OWB9.2.
Ex:I am having 2 records DCEC4000100 9159000050C those values are 5 bytes 'RAVI and 6 bytes '15000'.
Using contorl file i am trying to load these into Oracle,But i am not able into insert these records into Oracle.
Can any tell me how to handle this kind of situation?
Regards,
Rupak

Good morning Ashok,
Your data is in a SQL*Loader supported datatype, so basically it should not be a problem.
Have you checked the Database Utilities guide (for Oracle9i for instance: http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96652/toc.htm) on how to handle this?
I'll also repeat my previous question, have you ever been able to load data into the database using SQL*Loader (either using ASCII values or any other datatype)?
For the OWB part, have you read "Importing Data Definitions" (typically chapter 4)? More specifically, "Specifying Field Properties" in "About Flat File Sources and Targets"?
In "SQL*Loader Properties" it says the following:
Type Describes the data type of the field for the SQL*Loader. You can use the Flat
File Sample Wizard to import the following data types: CHAR, DATE, DECIMAL
EXTERNAL, FLOAT EXTERNAL, INTEGER EXTERNAL, ZONED , AND ZONED
EXTERNAL. For complete information on SQL*Loader field and data types, refer to
Oracle9i Utilities. Currently, only portable datatypes are supported.
If you check the database utitlities guide (chapter 6 Field List Reference) and look for "SQL*Loader Datatypes", you'll find (packed) decimal under the Nonportable Datatypes. This implies that OWB does not support it.
This does not mean you can't use SQL*Loader, you'll only have to define everything separate from OWB and call it separately as well.
Good luck, Patrick

Geting an error trying to import a data file into OWB repository

Hi,
We're using OWB 11.1.0.7.0
I'm trying to import a new data file and I'm getting an error.
When I go to The Project/Files/ I right click on the module I want to add the files to,
I get a 'Wizard' titled 'Welcome to the Import Metadata Wizard'.
I click next.
I get the 'Filter Information' screen that asks if I want to select 'All Data Files' or a specific file.
I pick 'All Data Files' and click 'next'.
I get the 'Object Selection' screen that has a left and right panel. The left side is titled 'Available' and the right side is titled Selected.
The 'Available' panel had the directory in Linux (/etl/datafeeds/dev) where our data files are stored with a plus sign next to it.
When I click the plus sign, I get an error message that says:
API2836: Directory
/etl/datafeeds/dev does not exist.Has anyone seen this? What is the work around? Is it a bug? How do I import a data file into OWB if this isn't the way to do it?
Thanks,

Hi, is there any obligation to use import wizard?
can you use right click and import view/table?
Ugur MIHCI
www.ifslibrary.com

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

How to import the data again to owb

Similar Messages

Maybe you are looking for