How to import track with automation?

when i import a track with data everything is included except the automation which is a problem please help!

Open the song for the track you want to import in the Browser section of Logic, then select the auto checkbox as well as the content ( and any plugins, I/O's etc ) then hit add and it'll import the track with the automation information to your current Logic arrangement page.

Similar Messages

  • Copy track with automation?

    Is it possible to copy a track with its automation? Also can you set the in and out points of a track that I wish to bounce?

    yes and yes.
    In automation settings, make sure "Ask" or "always" is selected for moving or copying audio or MIDI regions. Then option/drag the region.
    When you hit "Bounce", in and out points are in the lower left hand side of the dialog box. Or cycle record drag in the time ruler to pre-define the in/out points.
    This is all in the manual, BTW.

  • How to import files with static variables into a block with methods?

    i have a problem. is it possible to import files with static variables into tags like
    <%!
    //here i want to import a file named settings.inc
    //whitch is used to set jdbc constants like url,driver,...
    private void method() {
    private void method2() {
    %>
    <%@include file="xy"%>//dosn�t work above
    //only in <%%>tag

    This should be done using either the Properties class or ResourceBundle. Ex.
    <%
    ResourceBundle resBun = ResourceBundle.getBundle(String resource);
    String username = resBun.getString("username");
    String password = resBun.getString("password");
    // etc
    %>

  • How to import MP3 with file name into library, rather than tag?

    I've been given a CD with about 200 MP3s of lectures. They are to be listened to in order, and the file names reflect the order number, like "lecture 1", "lecture 2", etc. However, when I drag them all into iTunes, the names in the iTunes library don't include the file names - they are simply "lecture", which I guess must come from a tag in the MP3 file. So iTunes is ignoring the file name and thus I end up with 200 entries in my iTunes library that can't be ordered properly. How can I get it to use the file name when importing?
    Mike

    If you have your iTunes preferences set to keep your iTunes Music folder organized, it's possible that even the file names have changed according to the files' tags. In that case, you'll need to (at least temporarily) disable this option and import the files from your CD again.
    Once you're sure the files have been successfully added to your iTunes library and the file names kept intact, you can use the Filenames to Song Names script from Doug's AppleScripts for iTunes.
    This should get everything sorted out.

  • How to import images with path embedded in XML tag

    I have a website that has blogs with embedded images. I need to design an XML that can be imported in Indesign. I am able to import XML and lay it out in Indesign if I have only text. But I am not able to include or show the intermittent, embedded images in Indesign. Can this be done? -Thanks

    I can drag an image from, for example, the desktop, but if I delete that file on the desktop I won't be able to open that image in iPhoto, even if I've imported it
    That's an indication that you may have your library set up as a referenced library:
    Check the Advanced preferences in iPhoto to see if that checkbox is selected or not.  If it isn't checkec, check it and try importing agan. 
    To make sure all Photo Stream photos are automatically imported into your library set up iPhoto's PS preferences like this:
    You should read this User Tip by Terence Devlin which is the best treatise on how to access photos (for use outside of iPhoto):  How to Access Files in iPhoto
    OT

  • How to do that with Automator?

    Hi there,
    I've a certain difficulty using Automator for my problem:
    Let's say that I have a folder named "Movie" on my desktok, and in it I have a movie (.avi, mp4 or whatever) and I also have a subtitled file (.srt) for subtitles.
    How can i do to set Automator for renaming the .srt name file as the movie .avi name file?
    I'm asking that because I always watch TV series with subs, and it's kinda annoying to rename everytime each file, so I'm finding a way to rename the files in a single step.
    Usually I primarily have the .avi file into the folder, and in a second time I drag the .srt file into it. So I want that .srt file renamed as I drag it into the folder with the .avi file in it.
    Any kindly help?
    Thanks in anticipation

    I've tried to create an Automator workflow/app that would change the extension as you want but could not get it to do so.
    However I use Name Mangler for my renaming needs and easily created a droplet that would do the job:
    The droplet can be kept in the Doc and the folder dragged onto it to get the above window. 
    It's a terrific app and very versatile.

  • How to open applications with Automator?

    How would I got about opening, say, Contacts, Mail, etc using Automator? I then will want to map it onto F13-F19.
    I'll also want to open specific Web pages by pressing a Fn key.
    FWIW, with the method described in this article I can open Contacts but then it tries to open specific contacts (I think) and results in a dialog I have to dismiss. I just want to open the app.
    TIA,
    David

    Sorry, I meant to provide the article's URL: http://www.makeuseof.com/tag/fkeys-launching-applications-finder-items-mac/

  • How to import xml with data?

    Excel 2013
    i got an XML file generated by the GPinventory tool. when i import it into Excel, i only get the headers.
    how can i import the data as well?

    Hi,
    As far as I know, the GPinventory tool Supported Operating System :Windows 2000, Windows Server 2003, Windows XP, I suppose it generated XML file with Excel 2003 schema, but Excel 2013 have a new XML schema. This issue usually caused by the XML scheme.
    Please create a Excel 2013 schema XML file
    to test with Excel 2013, if the file could be import well. We'd better check the generated XML file.
    As a workaround, we'd better save the results as
    a tab-delimited text file and then import to Excel 2013.
    If this issue still exists, please upload the XML file through OneDrive. I want to test it.
    Regards,
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help. If you have any feedback on our support, please click "[email protected]"

  • How to import DVD with TC error to FCE?

    I try to import the DVD to FCE, but it has some problems with the time code. I use the Streamclip. But after few minutes it shows me error as below:
    All DVD players shows the DVD corect - I can watch it without any problem. The problem is when I try to import it to FCE.  Do you have any ideas, how to solve the problem?

    Please tell us more about the DVD, and the settings you are using in MPEG Streamclip.
    Is it a commercial DVD?
    What file type/codec are you trying to convert the DVD to?
    Are you selecting a specific VOB file to convert or just letting MPEG Streamclip convert the entire DVD?

  • How to import files with the extension Lotus Notes nsf in OSx Maveriks Mail

    I have a large archive of electronic mail produced with Lotus Notes, then nsf file, recently I purchased (November 2013) a Retina Macbook 15 "with OS Mavericks, I need to import all my mail format nsf program Mail this at Mavericks, I ask for help for this operation
    thanks

    Hello,
    From what I understand through your problem is that you are updating the database tables with the values obtained from the *.msg file, which may also include Asian characters. If you debug and check your internal table I'm certain you would find your Asian characters as they are. But once you upload them on to the database they get distorted. The problem is probably arising because your system is not unicode enabled, Please confirm with your basis person whether the system is Unicode enabled.
    Regards,
    Manish.

  • How to import pdf with hyperlink and and maintain its hyperlink while exporting it as HTML?

    We can import pdf in indesign either using plaacemultiplefile script or using place submenu  under file menu but both of them import pdf as graphic object and lost its all hyperlink. no doubt when i again export its as pdf than hyperlink are there as it is but when i export it as HTML,IDML or other format than than all hyperlink are lost so is there any way to maintain this if no than is there any way to write some new script utilities which will do the same .one solution i think is first convert pdf into docx and than import it as docx indesign import  it as text frame and maintain all hyperlink but in this process pdf file lost its some formating while converting it into docx .

    I probably should've remembered "rtfm" before writing all that.  It seems to me now that I need to create a Master Page for each of the different layouts, then dynamically select the one I want to use at run-time, maybe with a script event ?  The Master Page creation is a bit messy ... the only way I seem to be able to get multiple Master Pages is to open each Word doc, let Livecycle import it, then copy all the content into a new Master Page in my main document.  That is, there doesn't seem to be a way to import a series of Word docs directly into separate Master pages of a single Livecycle form.  I'll continue with the "read" part of "rtfm" ...

  • How to import correctly  with good configurations a AVCHD video ?

    Hello ! I want to import a video turned with my Sony Nex-VG 20 to adobe premiere pro but there is not the sound. Can someone explain it ? I didn't do the right configurations, so what i have to do ? Thanks.
    Fred

    Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
    -and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
    -http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

  • How to import layouts with live type and vectors?

    I seem to have run into a stumper on basic AE workflow. I want to set up a workflow where I can lay out designs in one app, and then bring them into AE to animate, and fly the camera around. My intent is to do infographics like this: http://vimeo.com/25123730  (OK, well, not nearly that slick...yet)
    The difficulty is, if I lay out my design in Photoshop, after I import it, it will let me convert the type to live type, but the vector shapes are all rasterized, and I can't get them as vectors. If I lay out in Illustrator, the shapes are all crisp vectors, but my type is rasterized! I'm thinking that there's something I have to be missing here.
    What's the solution?

    There's actually a very simple solution that I use all the time. You simply convert your type to outlines in illustrator. I do this kind of stuff at least once a month. That's the only way to go. A side benefit is that you get to work with much smaller file sizes and much faster rendering times when you're doing really big 3-D moves on a really big piece of artwork.
    The only catch is that some typefaces do not convert to outlines very well. You just need to make sure by carefully examining the conversion.
    Another trick is to duplicate the type layers before you convert them. I move all of the duplicated type to a separate layer that I keep at the bottom of the stack in case the client wants, and they always want, changes. That bottom layer is simply kept hidden.
    If I really need to use a text animator on one of the lines, I will use the illustrator layer as a placeholder and just simply type in the word or words. Most of my designs do not involve heavy use of text animators. These tricks will work  until After Effects has the ability to import LiveType from Illustrator or vector shapes from Photoshop.

  • How to import XSD with same name

    Hi,
    I have a Parent XSD which imports 3 XSD's.
    The parents XSD name and one of the imported XSD name is same in the XSD.
    Say for Ex: 1.xsd is a parent
    which import 2.xsd , 3.xsd & 1.xsd ( from different directory - import path in the XSD is different - <xsd:import namespace="www.localdomain.com/1.xsd" schemaLocation="C:/container/path/1.xsd"/>
    where as the parent 1.xsd is in c:/jms/path/1.xsd
    So whenever i import into the workshop it is giving me compilation error.
    How to fix this ? pls help.
    Thanks,
    -Raj..

    You can try like below.
         var oObject = xfa.resolveNode("Object[1]");
         xfa.host.messageBox("" + oObject.rawValue);
    Thanks
    Srini

  • How to stabilize tracking with Clone Stamping?

    So on the set, I was unable to get a green screen for the interior car shoot to sell that the car is moving, so as far our "poor man's" process (crew shaking the van and HMI lights) and post production, how can I stablize Clone Stamp footage layer on top of another video. And yes my PC is limited to AE CS4 which is why I feel Clone Stamping is my last resort vs Rotoscoping.
    The first photo is what we shot on set obviously, the second is some street footage I shot separately and the third is the idea I am trying to sell that the car is actually moving (it's not the final cropping, lol).  Basically a video within a video. Thanks for reading this, would appreciate some serious technical tips or videos!

    Nothing stops you from using masks and animating them to cut out the windows and then place your street footage below. You're going about this the wrong way. Stabilize both shots, do the masking, then un-stabilize again by applying the inverse motion data. There's enough tutorials on this out there.
    Mylenium

Maybe you are looking for