How to include 0STOCK_VAL in a Query based on APO DataSource?
Hi All,
I have a requirement to include *0STOCK_VAL" from Inventory to the APO InfoCube. But the problem with this is, this particular KeyFigure is not present in the APO hence it cannot be included in the APO DataSource i.e. we cannot get this from the Source System.
I checked the Production system, 0STOCK_VAL InfoObject is avaiable in one of the InfoCube but it is not present in any DSO's. Since it is not present in any of the DSO's we cannot write a Routine to read it from any of the table.
I even thought of including the InfoCube where 0STOCK_VAL is present into a MultiProvider along with the APO InfoCube. I can define the joining condition based on Plant and Material. But if I drill down any other characteristics which are not common in both the InfoCube then we will have a blank line in the Query which is not recommended.
But this KeyFigure is very much needed in the Query.
My question is how to include this in the APO InfoCube or How to get this in the Query with values??
Can anybody please help me on this.
Thanks in advance.
Prasapbi
hi Matt,
In your example like a transaction was paid for with a payment type of PTAM, then you need all the transaction details. I suppose that all the required transaction details along with payment type PTAM will be loaded into an infoprovider and you run a report on top of this infoprovider. Then for that report you need to have a selection screen variable for Payment Type and if the user enters the payment type PTAM, then he can get all the other transaction details from the infoprovider.
Let me know if i don't understand the requirement correctly.
Hope it helps....
Similar Messages
-
Query based on Master datasource? - URGENT
Hi Experts,
Is it possible to create a query based on MASTER Datasource(Z master datasource)? if possible then how we can go or are there any setttings?...i got confused here..
thanks in advance.
regards,
mahanteshIf you mean an Infoobject masterdata record, you need to change the IO, Mater data/text tab, check charachter is data target/Infoprovider flag an activate the IO.
Now you can use it in BEX
Regards -
How can include '*' option in a query
Hi,
I have an input field for Material number , and this is used in a join to fetch data , my problem is some times user will enter material number as 456* , in this case how can i change the query.
Please see the join,
select dmatnr as material dwerks as plant dlgort as slocation dumlme dlabst rmeins k~maktx as descr
into corresponding fields of table it_data2
from mard as d inner join mvke as m
on dmatnr = mmatnr
inner join mara as r
on rmatnr = dmatnr
inner join makt as k
on kmatnr = dmatnr
*where d~matnr= lv_matnr*
and d~werks in r_plant
and m~vkorg in r_sales.
Regards,
Ratheesh BSHi,
Use this:
select d~matnr as material d~werks as plant d~lgort as slocation d~umlme d~labst r~meins k~maktx as descr
into corresponding fields of table it_data2
from mard as d inner join mvke as m
on d~matnr = m~matnr
inner join mara as r
on r~matnr = d~matnr
inner join makt as k
on k~matnr = d~matnr
where d~matnr like '456%'
and d~werks in r_plant
and m~vkorg in r_sales. -
How to include conditions in select query
i want to write a select query wherein plants have to to be fetched from table vekp
and if it is a plant then the set movement type to 999 else leave for exiting.please help me on this>
deep shikha wrote:
> (This is module pool programming)
what is modulepool programming doing in form printing forum.
Please use appropriate forum next time.
кu03B1ятu03B9к -
Select query based LOV for tabular form attributes
Hi HTMLDB Team,
Congrats u all for the new release of HTMLDB in htmldb.oracle.com.
I badly need a solution of the below problem.
Say , i have table called user_col_comments now i want to display the table_name ,column_name and comments in a tabular form.I displayed only one row for the tabular form.Now i create a select query based LOV for attribute table_name where i got all table_name in drop down list.
Point is that after selecting any data from drop down table list i want to get the corresponding fields to be populated in column_name attributes.How can i wrote the select query based LOV for the attibute column_name.
I wrote it as 'select column_name d,column_name r from user_col_comments where table_name=:TABLE_NAME Its not working?
Similarly i want same thing to display for comments after matching both table_name and column_name.
Any solution to get rid of those problem will be highly appreciable...
If u need my htmldb.oracle.com userid and password to solve the problem i will sure let u email it.
Cheers,
Emanhi rchalton,
can u plz little bit more clearer .I know hopefully u can imagine the problem and may u guide me thru proper way.....One think i understand that there must be multiple process and submit but "only when..." that u have said i cant understand that part........
U are welcome to give me proper solution.....
Thanks for the reply ....atleast one can pay hid to me.....
Cheers,
Eman -
How to Broadcast Control Query based on User Exit Variable
Hi Gurus,
How to Broadcast dashboard based on Control Query based on User Exit
Variable to different users via mail in BW 3.5 version. Any document or
steps to achieve this will be very helpful.
Regards
VishwanathHi Surendra,
Thanks for the reply and your suggestion. It will be great if you can help me to answer the below:
1) What exactly we mean by Control Query - Any example will be very helpful
2) As you mentioned, yes the user exist to be written will be for user-exit variable for dynamic period selection - An Example on how to create this will be helpful
3) Once the above variable is created, what are the steps to include this variable in the Bex Query?
4) Once all the queries to be used in dashboard are implemented with the exit variable, how to create a variant to be used in Broadcasting?
5) How and where to configure the email recipients (to whom this dashboard will be sent via mail)?
6) How to set up the BW broadcaster in BW 3.5 using the control query ?( My question is though we have to send the dashboard to the users, which has multiple queries, how a single control query with variant will help us).
Awaiting your reply.
Thanks and Regards
Vishwanath -
How to build a query based on(UNION) 3 vendor InfoObject
Dear Experts:
I have a requirement to build one query based on 3 vendor InfoObjct: 0VENDOR + 0VEN_COMPC + 0VEN_PURORG.
I tried to build a multiprovider upon these 3 infoobjects, but when I Identify(Assign) the key for each InfoObject, supposely there should be 3 InfoObject for me to check (0VENDOR, 0VEN_COMPC and 0VEN_PURORG) so that I can UNION these 3 infoobjects together on vendor number. But since the reference infoobject of these 3 vendor master data is different, I can not check the 3 together.
Can anybody let me know how to build that query? I only need vendor number show once, and the attributes of 0VEN_COMPC and 0VEN_PURORG can be union to 0vENDOR.
Any post would be appreciated and thank you all in advance!
Best Regards!
TimHi,
you can create a link between the vendor objects itself, means link 0vendor with 0ven_compc and 0ven_purorg. This should give you a list of all vendors multiplied with the comp codes multiplied with the purch. org. May be here it is possible to create another link between a attribute (eg. comp_code of 0ven_purorg with comp_code of 0ven_compc). In case it is not possible you need to add this link information somehow. Another option might be to create 2 queries. One on a infoset of 0vendor and 0ven_purorg and another one on 0vendor and 0ven_compc.
regards
Siggi -
How to increase performanceof query based on Infoset?
How to increase the performance of a query based on a Infoset?
As per designing of query, all the necessary fields are placed where they are required.Hi Akshara ,
To improve performanceof query try to remove unnecessary characteristics, attributes, or key figures ,Superfluous conditions or variables .Large InfoCubes and Complex hierarchies .Variables populated by user exits
For characteristics specify either variables or restrictions .
You can create indexes on DSO and Aggregates on cubes (if any).
Please go through the links :
http://help.sap.com/saphelp_crm40/helpdata/en/77/4a213cc534f20ae10000000a11402f/content.htm
Re: Performance of query built on infoset
Query performance issue - Infoset query
Hope you will find this helpful.
Regards,
Jaya -
How to include OSTC.rate in this query
How to include OSTC.rate in this query,Im using it for crystal report.
DECLARE @sVAT NVARCHAR(max)
DECLARE @sCess NVARCHAR(max)
DECLARE @sCST NVARCHAR(max)
DECLARE @nDocentry INT
SET @sVAT='1' SET @sCess='7' SET @sCST ='4'
SELECT DocEntry
,DocDate,VehicleNo,Driver,NumAtCard
,Building,Block,Street,City,District,State,Country
,Series,DocNum
,BTinNo,BCstNo,BCeRegNo,BPanNo,BCeRange,BCeComRate,BCeDivision,BEccNo
,Type
,CardName,[Delivery Addr]
,ECCNo,CERange,CERegNo,CEDivis,CEComRate
,PAN,CST,STN
,[Deliver At]
,LineNum
,Dscription,HSNumber,Quantity,Rate,LineTotal,Discount,Vat [VAT],Cess [Cess],Total,GTotal
,TotalExpns
,MfgName
,MFGBuilding,MFGBlock,MFGStreet,MFGDistrict,MFGCity
,MCERegNo,MCERange,MCEDivis,MCEComRate,MPAN,MCST,MSTN
,SupName
,SUPBuilding,SUPBlock,SUPStreet,SUPDistrict,SUPCity
,SCERegNo,SCERange,SCEDivis,SCEComRate,SPAN,SCST,SSTN
, (select substring((select upper(name)+',' from OUBR where isnull(U_SeriesGrp,'')<>'' order by Code FOR XML PATH ('')),1,LEN((select upper(name)+',' from OUBR order by Code FOR XML PATH ('')))-1))[Branches]
FROM
SELECT
/*OBTN.DistNumber*/
INV1.DocEntry
,OINV.DocDate,OINV.U_VehicleNo VehicleNo,OINV.U_Driver Driver,OINV.NumAtCard
,CAST(OLCT.Building AS VARCHAR(255))Building,OLCT.Block,OLCT.Street,OLCT.City,OLCT.County+' - '+OLCT.ZipCode[District],OCST.Name State,OCRY.Name Country
, NNM1.SeriesName [Series], OINV.DocNum
,OLCT.TinNo [BTinNo],OLCT.CstNo [BCstNo],OLCT.CeRegNo [BCeRegNo],OLCT.PanNo [BPanNo],OLCT.CeRange [BCeRange]
,OLCT.CeComRate [BCeComRate],OLCT.CeDivision [BCeDivision],OLCT.EccNo [BEccNo]
,OBTN.U_InvType Type
,OINV.CardName,OINV.Address2[Delivery Addr]
,CE_CRD7.ECCNo,CE_CRD7.CERegNo,CE_CRD7.CERange,CE_CRD7.CEDivis,CE_CRD7.CEComRate
,CRD7.TaxId0[PAN],CRD7.TaxId1[CST],CRD7.TaxId11 [STN]
,OINV.U_Address [Deliver At]
,INV1.LineNum,INV1.ItemCode
,INV1.Dscription,OITM.SWW [HSNumber]
,INV1.Quantity,INV1.PriceBefDi Price,INV1.LineTotal,INV1.Price Rate,(INV1.PriceBefDi-INV1.Price)*INV1.Quantity Discount
,INV4.Vat
,INV4.Cess
,INV1.LineTotal+INV1.VatSum Total
,OINV.DocTotal GTotal
,OINV.TotalExpns
,OBTN.U_MfgName MfgName
,convert(nvarchar(250),MFG_CRD1.Building) MFGBuilding,MFG_CRD1.Block MFGBlock,MFG_CRD1.Street MFGStreet,MFG_CRD1.City MFGCity,MFG_CRD1.ZipCode[MFGDistrict]
,OBTN.U_MCERegNo MCERegNo,OBTN.U_MCERange MCERange,OBTN.U_MCEDivis MCEDivis,OBTN.U_MCEComRate MCEComRate
,OBTN.U_MPAN MPAN,OBTN.U_MCST MCST,OBTN.U_MSTN MSTN
,OBTN.U_SupName SupName
,convert(nvarchar(250),SUP_CRD1.Building) SUPBuilding,SUP_CRD1.Block SUPBlock,SUP_CRD1.Street SUPStreet,SUP_CRD1.City SUPCity,SUP_CRD1.ZipCode[SUPDistrict]
,OBTN.U_SCERegNo SCERegNo,OBTN.U_SCERange SCERange,OBTN.U_SCEDivis SCEDivis,OBTN.U_SCEComRate SCEComRate
,OBTN.U_SPAN SPAN,OBTN.U_SCST SCST,OBTN.U_SSTN SSTN
FROM
OINV
INNER JOIN INV1 ON OINV.DocEntry=INV1.DocEntry
INNER JOIN OITM ON INV1.ItemCode=OITM.ItemCode
INNER JOIN
select
INV4.DocEntry,INV4.LineNum
,CASE WHEN INV4.staType IN (@sVAT,@sCST) THEN sum(INV4.TaxSum) ELSE 0 END Vat
,CASE WHEN INV4.staType=@sCess THEN sum(INV4.TaxSum) ELSE 0 END Cess
from
INV4
where
INV4.DocEntry={?DocKey@} and INV4.RelateType=1
group by INV4.DocEntry,INV4.LineNum,INV4.staType
)INV4 ON INV1.DocEntry=INV4.DocEntry AND INV1.LineNum=INV4.LineNum
INNER JOIN OLCT ON INV1.LocCode=OLCT.Code
INNER JOIN OCST ON OLCT.State=OCST.Code
INNER JOIN OCRY ON OLCT.Country=OCRY.Code and OCST.Country=OCRY.Code
INNER JOIN INV12 ON OINV.DocEntry=INV12.DocEntry
INNER JOIN OITL ON INV1.BaseType=OITL.ApplyType AND INV1.BaseEntry=OITL.ApplyEntry AND INV1.BaseLine=OITL.ApplyLine
INNER JOIN ITL1 ON OITL.LogEntry=ITL1.LogEntry
INNER JOIN OBTN ON ITL1.MdAbsEntry=OBTN.AbsEntry and ITL1.SysNumber=OBTN.SysNumber and ITL1.ItemCode=OBTN.ItemCode
LEFT JOIN OCRD MFG_OCRD ON MFG_OCRD.CardCode=OBTN.U_MfgCode
LEFT JOIN CRD1 MFG_CRD1 ON MFG_OCRD.CardCode=MFG_CRD1.CardCode AND MFG_OCRD.BillToDef=MFG_CRD1.Address and MFG_CRD1.AdresType='B'
LEFT JOIN OCRD SUP_OCRD ON SUP_OCRD.CardCode=OBTN.U_SupCode
LEFT JOIN CRD1 SUP_CRD1 ON SUP_OCRD.CardCode=SUP_CRD1.CardCode AND SUP_OCRD.BillToDef=SUP_CRD1.Address and SUP_CRD1.AdresType='B'
LEFT JOIN NNM1 ON OINV.Series=NNM1.Series
LEFT JOIN CRD7 ON OINV.CardCode=CRD7.CardCode AND CRD7.Address='' AND CRD7.AddrType='S' --Tax Details
LEFT JOIN CRD7 CE_CRD7 ON OINV.CardCode=CE_CRD7.CardCode AND OINV.ShipToCode=CE_CRD7.Address AND CE_CRD7.AddrType='S' -- Central Excise Details
WHERE
INV1.DocEntry={?DocKey@}
)INVOICE
GROUP BY
DocEntry
,DocDate,VehicleNo,Driver,NumAtCard
,Building,Block,Street,City,District,State,Country
,Series,DocNum
,BTinNo,BCstNo,BCeRegNo,BPanNo,BCeRange,BCeComRate,BCeDivision,BEccNo
,Type
,CardName,[Delivery Addr]
,ECCNo,CERange,CERegNo,CEDivis,CEComRate
,PAN,CST,STN
,[Deliver At]
,LineNum
,Dscription,HSNumber,Quantity,Rate,LineTotal,Discount,Vat,Cess,Total,GTotal
,TotalExpns
,MfgName
,MFGBuilding,MFGBlock,MFGStreet,MFGDistrict,MFGCity
,MCERegNo,MCERange,MCEDivis,MCEComRate,MPAN,MCST,MSTN
,SupName
,SUPBuilding,SUPBlock,SUPStreet,SUPDistrict,SUPCity
,SCERegNo,SCERange,SCEDivis,SCEComRate,SPAN,SCST,SSTNYou're double posting ( how to change join condition in this query ) , stop doing that, since you'll only be distracting and diverting by doing so.
Take the time to read the SQL and PL/SQL FAQ @ https://forums.oracle.com/forums/ann.jspa?annID=1535, since you're not even mentioning a database version, while 9i {noformat} != {noformat} 10g {noformat} != {noformat}11g...
Have your DBA trace/tkprof the query, and so on, if you cannot do that yourself.
And then provide the feedback the volunteers, including Ace (Directors)' s need ( and you were very lucky, from that point of view, I think, from looking at both your posts ;) ) -
How to add a selection criterion to a SQ01 query based on logical database SDF?
Hi,
How should I add a selection criterion to a SQ01 query based on the logical database SDF? Is it possible through additional code? How to make use of the custom selection fields? I need a selection criterion based on BKPF-CPUDT (creation date).
Thanks.Hi John,
Please check the given below link in addtion to Atul post.
http://scn.sap.com/community/erp/sd/blog/2012/04/16/query-report-tips-part-2--mandatory-selection-field
Thanks,
Senthil Maruthappan. -
How to access query based view object in backing bean
Hi
I am using JDev11.1.2.1.0
I want to use the query result of query based view object in backing bean.
How can i do the same
Please Solve this
ThanksHi,
Assuming ADF is in the picture
1. Create a PageDef file for the page (right mouse click "Go to Page Definition")
2. In the Executable section, create an iterator for the View Object
3. In the managed bean:
BindingContext bctx = BindingContext.getCurrent();
BindingContainer bindings = bctx.getCurrentBindingsEntry();
DCIteratorBinding iter = (DCIteratorBinding ) bindings.get("name of Iterator");
iter.execute();
// ... navigate the iterator rows ...//
Frank -
How do I create a query based distibution group in Exchange 2010?
Hi,
We have just moved onto exchange 2010 and I wanting to create query based distribution groups based on OU's. As there is now wizard within 2010 I am a little unsure as to how to go about this. I am led to believe I now need a scritp to do this.
Any help would be greatly appreciated.
ThanksI have tried this and get the following error. Any Ideas?
Delivery has failed to these recipients or groups:
All@Doncaster <mailto:IMCEAEX-_O%3DFIRST%2B20ORGANIZATION_OU%3DEXCHANGE%2B20ADMINISTRATIVE%2B20GROUP%2B20%2B28FYDIBOHF23SPDLT%2B29_CN%3DRECIPIENTS_CN%3DAll%[email protected]>
The email address that you entered couldn't be found. Check the address and try resending the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: CRHV03.crhfsg-uk.co.uk
IMCEAEX-_O=FIRST+20ORGANIZATION_OU=EXCHANGE+20ADMINISTRATIVE+20GROUP+20+28FYDIBOHF23SPDLT+29_CN=RECIPIENTS_CN=[email protected]
#550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ##
Original message headers:
Received: from CRHV03.crhfsg-uk.co.uk ([fe80::451b:a27f:42cb:f770]) by
CRHV03.crhfsg-uk.co.uk ([fe80::451b:a27f:42cb:f770%12]) with mapi id
14.01.0289.001; Fri, 15 Jul 2011 15:24:50 +0100
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: "Smith, Stacey" <[email protected]>
To: "All@Doncaster" <[email protected]>
Subject: FW: test
Thread-Topic: test
Thread-Index: AcxC+SC29u62U+fVRiGEfoRPRWVvRgAAc31g
Date: Fri, 15 Jul 2011 15:24:50 +0100
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Originating-IP: [10.39.1.125] -
Include Button that executes PL/SQL procedure to SQL query based region
I would like to add two columns to a SQL query region.
These columns would not be sourced from the query, but rather would be used to execute a PL/SQL procedure.
For example, I would like to have a manager approve or deny adding an additional employee to the department.
There would be one button for APPROVE. And, one button for DENY.
The PL/SQL procedure would execute to perform the required DML based upon the selected action (either APPROVE or DENY).
A sample output would look like this:
<APPROVE>, <DENY>, John Doe, Accountant
<APPROVE>, <DENY>, Jane Doe, Accountant
Is there any way to add a button to a SQL Query based report region where that button executes a stored proc? If so, what is the basic process for doing this?
Thanks!
-ReidIs there any way to add a button to a SQL Query based report region where that button executes a stored proc? If so, what is the basic process for doing this?Conditional page item? You can associate processes with buttons on a page
-
How to deploy configuration manager client package to a query based collection
Hi
I have created one OU based collection.Now i wants to deploy client package to this collection so that the client automatically get installed,whenever a new machine added to the OU and so on to the collection.
But the issue is with configuration manager client package deployment,as we can't deploy the default configuration package to the collection(Deploy option is grayed out). For this i created a new configuration manager client package and deployed this package
to the query based collection.
Now when a new machine added to this collection,the client did not appear to deploy on this machine. Please helpIf you want all the devices in the OU to get the client, you can use a Computer Startup Script to deploy it. Everybody just uses Jason's since it does everything and is well documented.
http://blog.configmgrftw.com/configmgr-client-startup-script/
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful". -
Query Based Taxonomy - Dynamic Creation of a Query Problem
Hi,
I'm trying to create new category nodes in a taxonomy and to assing them queries. I know how to do this, but I encountered a strange behavior. Here is the situation:
I have a string property DocumentType. When manualy creating a query, it looks like:
DocumentType CONTAINS "Some string"
But when I do the same using code I get:
DocumentType IS "Some string"
And as a result of this, the taxanomy is not working properly.
Here is the code:
indexService =
(IIndexService) ResourceFactory
.getInstance()
.getServiceFactory()
.getService(
IServiceTypesConst.INDEX_SERVICE);
// This kind of classification index offers functionality working with query based taxonomies
qbcIndex = (IQBClassificationIndex) indexService.getIndex(indexId);
// Get a query folder - a query folder is a representation of a query based taxonomies category
queryFolder = qbcIndex.getQueryFolder(RID.getRID(folder));
// List of IQueryEntry objects for the query folder
queryEntryList = queryFolder.getQuery(context);
// Cast the IQBClassificationIndex into a ISearchIndex object
searchIndex = (ISearchIndex) qbcIndex;
queryEntry = searchIndex.getNewQueryEntry();
queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
queryEntry.setPropertyName(propertyName);
queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
queryEntry.setValue(propertyValue);
queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
queryEntryList.add(queryEntry);
// Set the query for the query folder
queryFolder.setQuery(queryEntryList, context);
qbcIndex.updateCategoryContents("Document_Types", false, context);
Can somebody tell me what am I doing wrong please. Isn't it because of IQueryEntry.PROPERTY_OPERATOR_EQUAL? Is there any substring operator?
Thanks a lot.Hi, Robert
In this moment, I have a problem with Query Based Taxonomy, maybe could you help me. I insert the query in to the taxonomy from code, but when i use the method
qbcIndex.updateCategoryContents("/taxonomies/borrame5/Prueba2", false, context);
I got the next exception:
#1.5#0014C210F3D1002A000001200000565B000431CC93AD5979#1180654627543#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_17##0#0#Error##Plain### at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)#
#1.5#0014C210F3D100310000012B0000565B000431CCC47166AB#1180655445698#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###com.sapportals.wcm.service.indexmanagement.IndexNotReadyException: Some documents are not included in this update because indexing has not been finished yet.#
#1.5#0014C210F3D100310000012C0000565B000431CCC4717417#1180655445701#System.err#sap.com/irj#System.err#dummy01#10241#####SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain### at com.sapportals.wcm.service.indexmanagement.retrieval.trex.AbstractTrexIndex.updateCategoryContents(AbstractTrexIndex.java:2493)#
I have doubt what parameters i need to pass to the method updateCategoryContents,
Let me give some information:
taxonomy:
/taxonomies/borrame5/Prueba2
repository:
/documents/Portal_KOF/KM/Pruebas1/Pruebas Versionamiento
classification and search index:
borrame5
I can't classify automatically, when i insert the query from code. When I manually insert the query from the portal, automatic classification run perfectly.
Thanks
Greetings
JARO.
Maybe you are looking for
-
I have already tried turning the power off and back on, holding the home and power button for ten seconds and shutting it off that way, and disconnecting from the wifi. None if those fixed the problem. However, resetting all of the settings did actua
-
How do I use time machine to restore to a new mac
Just bought the new i mac. I'm using Mt Lion on my old mac and Time machine with a back up. How do i restore to my new mac from time machine?
-
Strange problem here (but YAY it compiles G)...and I think it's in the delete method but I am not a hundred percent sure... I have a linked list that hold 5 pieces (word, date, orig, pos, def) of data per each linked list line. I also have a vector l
-
Completely disable comments in Acrobat
We spend most of our time editing pdfs everyday. As most know the shift key is needed to select multiple items, however, with the shift key depressed we always get the little green comment box. How can we disable the comment box? In our workflow it i
-
I used to have a skype number but had to allow it to runout. Can I reactivite that number