How to include a .js file into .jsp file.[.js file resides in a package]

Hi,
How do i include an external .js(JavaScript) file into a JSP file?My .js file is located in some package(lets say abc.jar). Below is my application structure:-
jsp
   |
   ->MyJsp.jsp
lib
   |
   |
abc.jar
    |
    |
    ->com.abc.test
                 |
                 |
                 ->Test.java
                 ->abc.jsHow do i include "abc.js" file in "MyJsp.jsp" file?
Please help.
Thanks,
Kiran
Edited by: Adimulam on Jun 2, 2008 1:22 PM

Even this is also not possible because, the code in that package is developed by DWR and i am just adding it to my lib folder and importing the respective classes. In the same manner i need to include the *.js* file in the JSP.It took me about 3 minutes reading through the [DWR Getting Started|http://getahead.org/dwr/getstarted] page to learn that you don't have to do any of that. Perhaps you should read that page?

Similar Messages

How to include several PDF documents into just one file?

I have a Word document with 6 pages that I saved in PDF.
I wanted to transform the entire document in JPEG (JPG) immage, so that I could use it in other tools, such as Facebook for example.
The problem is that using Adobe Photoshop it opens and saves page by page.
Can you give me s solution or hint?
Flavio
[email protected]

Thank you!
I already saved all pages as .pdf w/ Acrobat and have all 6 pages saved in
.jpg, using Photoshop.
Problem is that I want to post the whole text in my Facebook page, and to
have it in six pieces is not quite readable...
Thanks anyway and have a joyful Xmas!
2011/12/24 try67 <[email protected]>
Re: How to include several PDF documents into just one file? created
by try67 <http://forums.adobe.com/people/try67> in Adobe Reader - View
the full discussion <http://forums.adobe.com/message/4102594#4102594>

How to include a KB Update into a WIM in order to point to the WIM when using DISM (details inside)?

Hi, I was told in another of the forums that my issue
is best suited for the TechNet audience. Previously, I posted it here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/how-to-include-a-kb-update-into-a-wim-in-order-to/e7015076-b4a9-4862-a73b-6c58b4c82461?tm=1409598696763
I've been struggling to fix a corrupted file.
Context: I feel that something is not right with the computer, so I started poking around.
I used "sfc /scannow" from an elevated command prompt and the result was:
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log <var style="border:0px;margin:0px;padding:0px;vertical-align:top;-webkit-font-smoothing:antialiased;">%WinDir%</var>\Logs\CBS\CBS.log.
I looked in the log. This message appears 4 times:
Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate",
TypeName neutral, PublicKey neutral in the store, hash mismatch
There is also the following message:
This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
I'm not positive what to do next, but I have been led to believe the problem is that Flash files in version 6.3.9600.16407 are corrupted, that I need to find which KB updates Flash to this version, download the file, add it to a new WIM, and point
to it when using DISM. I'm not positive this is correct, but it was suggested.
I downloaded the KB update: kb2889543, but I do not know how to add it to a new WIM or what the repercussions of doing so will be (e.g. Will I lose everything and have to restore my documents, etc from my external drive by doing this?).
So, the question is: How can I include a KB Update into a WIM and tell me what the result will be when once I do and point to it when using DISM?
Secondarily, if this is a bad way to move forward with the issue, would some kind soul offer sage advise on how to move forward with resolving the original issue?

Hi TTQSTTQS,
As you mentioned in the answers forum, when run the command DISM /Online /Cleanup-Image /RestoreHealth, we received the error message “The source files could not be downloaded. Use the "source" option to specify the
location of the files that are required to restore the feature”.
When run the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess, we met the same error message.
I think there are some mistakes in the source setting, so we meet the same error messages.
As I mentioned in the last reply, we need a mounted image as a repair source, and then use this path.
We need to configure a Windows repair source. Please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825020.aspx
Please refer to the following steps to set the source image.
1. Assign Drive Letters to Partitions by Windows PE.
2. Capture Partition Images using DISM
For more information, please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825072.aspx
Then, we could try the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How do i combine multiple pdf file into a single pdf file?

how do i combine multiple pdf files into a single pdf file?

The thread was started in early March and it's Mid-April, I know this very well. The OP of this thread posted a very common and simple question or maybe he/she would have resolved this. For an Adobe Acrobat user it's not at all difficult to combine multiple PDF files into one. But to combine PDF files full version of Adobe Acrobat is mainly required, otherwise PDF files can't be combined. For example, I'm using Adobe Acrobat 9 Pro. These simple steps are mainly required to combine PDF files:
Open Adobe Acrobat.
Click on Combine and click on Merge files into a single PDF.
A window will be appearing, click on Add Files and select the PDF files you want to combine.
Arrange the selected files in any order with the help of Move Up and Move Down button.
Now click on Combine File and the selected PDF files will be combined within a few seconds.
A new PDF file will be created. Click on Save As and name this new PDF file. Then, click on Save.
A new PDF file will be created and all the selected PDF files are combined in it. The steps shown above might be different in other versions of Adobe Acrobat. Other than this, some third-party PDF merge software are also available. Most of them are available with a demo version for free evaluation. I've heard much about SysInfoTools PDF Merge software on other forums and directories and it's demo version is freely available. One may check its demo version if Adobe Acrobat (full version) is not available.
Regards

Source code organization: How to divide large JavaScript files into several smaller JavaScript files?

Hello,
some of my JavaScripts have become considerably large over time. What I would like to do is to split a single (large) JavaScript source file into several smaller source files plus an additional JavaScript file containing code or directives to recombine the split files.
In other words, I would like to organize my JavaScript source code into re-usable modules.
Although I searched the Acrobat JavaScript developer documentation and did a lot of Web searching, I still have no idea...
whether the Acrobat JavaScript scripting environment itself does provide a code structuring mechanism
how to properly organize large Acrobat JavaScripts in general.
Any help would be greatly appreciated! Thanks a lot in advance!
Sebastian

Document-level scripts are not accessible to other documents/scripts, so they're not a good option.
Folder-level scripts, on the other hand, are accessible to all other documents/scripts. So if you have a general function that creates a 3D annotation, for example, you can place it in a folder-level script and then call it from other scripts (you will probably need to provide it a handle for the document and properties of the annotation).
One thing to be aware of, though, is that the folder-level scripts are loaded alphabetically, so don't put a reference in script aaa.js to something that loads in zzz.js, or you will get an error message when you open Acrobat. (this is not a problem if zzz.js is not called during the launch of Acrobat)

How to transfer input file into XI through sender file adapter

Hi
I am quite new to XI. Want to know how I can transfer a file into XI through sender file adapter. I dont have any input file, so I have to create a sample input file and I want to transfer that into XI. Can you please advise me of the steps involved in that. I have finished work in design and directory, now I want to push file the sample file into XI. The receiver adapter is an IDoc adapter. And also a very trivial question. How I can place my sample file into my source directory. Thanks

Hi Rajiv,
If your transport protocol is NFS then you need to put the file in the XI server. Because it becomes the Network File System. For that you can just type the ip address of the XI server in the "run" command or in the browser with "
" then in any of the Folders you can paste your file. But ensure that this is the path you give in your Sender File Adapter.
If your transport protocol is FTP then you need to see that ftp is running in your system. for that go to Control Panel>Add/Remove Programs>Add/Remove Components. In that check the IIS server and go to details and see that ftp is also checked. Now ftp is running in your system.
Now open your C:> drive >InetPub>ftproot . and create a folder here and paste your file. In the configuration of your File sender adapter just mention the name of the folder.
For your information, you can create a file with xml tags and namespace and message type manually (or) you can directly get it from the test tab of message mapping and generate source code.

I want to insert .pdf files into a "Master" .pdf file at pre-determined intervals - how do I do this?

I want to insert .pdf files into a "Master" .pdf file at pre-determined intervals - how do I do this?

Hi markm11762689,
When you insert pages, you can determine whether they go before or after the first or last page, or a page number that you specify.
If you're inserting multiple files at once, they will all be inserted in the same spot that you specify in the Select File to Insert dialog box.
There may be a way to handle this programmatically, and there are some very clever folks who visit these forums regularly. Let's see if they chime in...
Best,
Sara

How to export the same mb size of my cr2 files into jpg or tiff files in Lr?

How to export the same mb size of my cr2 files into jpg or tiff files in Lr?
Let's say my file size is 22mb, when i export the file to tiff or jpg, although Iam careful with the settings- file size, dimension, resolution, I can't manioukate how I want it.
With jpg I tried everything, no matter what i do or change in files size or resoltion it remains the same size- 7mb as opposed to 22..
Please advise,
Best wishes,
T

I would noramlly opt for a tiff file, sending such a high res through the nest a nightmare
This is probably just an improper use of terminology, but the resolution of a JPG, DNG and TIF should all be the same.
The files differ in size, not resolution and not number of pixels.
Jpg is not that bad, but its a pitty they have to be edited under a jpg format..
Your raws are edited as raw. There is no loss of quality in the editing process. The files are then exported as JPG, which will cause a loss of quality. For just about any use, the loss of quality in the image when you export a JPG at quality level 12 is NOT noticeable. For many uses, exporting a JPG at a quality level of 8 will not be noticeable either, unless you intend to print the photo at a very large size. As twenty_one (not his real name) said, "Jpeg compression is fantastically effective".

How to include multiple image components into a single custom component???

How to include multiple image components into a single custom component???

Hi Marcel,
an ABAP transaction can only run or at least be started on one single system. A portal transaction can be assigned using a URL. This doesn't need any logical component.
Regards
Andreas

My mac is converting Word and Excel files into Pages and Numbers files when I click to open them (or download and open them) from an email. I do I get this to stop? It's really aggravating.

My mac is converting Word and Excel files into Pages and Numbers files when I click to open them from an email. Downloading them and opening them doesn't help. How do I make this stop? I don't use iLife and don't want to; my clients are using Office and it's easier for me, except when I have to copy and paste everything they send me from an iLife file back to Word and Excel. Help!!! It's like Apple has become Microsoft, forcing us to use their apps.

Do you have Word & Excel installed, if yes, navigate in the finder to an example of each, right click and select 'Get Info' scroll down to 'Open With' and select the appropriate program, check the box that says 'Change All'

Convert Windows Excel File into a Mac Excel File

I have transferred my Workout Journal spread sheet over from my girlfriends PC (which I use often) . Problem is, I can't access it the file on my Mac in Excel or Numbers. It's currently in .xlsx format, I tried simply renaming as an .xls file but it wouldn't open properly on either application.
How do I convert this file Windows file into a Mac readable file. Thanks
All help appreciated

You cannot read Excel ".xlsx" form files using older versions of Microsoft Excel than the 2011 version of Office for Mac or at all in Numbers. You will either have to Upgrade your version of Excel on your Mac to "Office for Mac 2011", OR go back to your girlfriend's computer and resave the file using "Save As ..." and there select the ".xls" compatibility format instead of the default ".xlsx" version that the newer versions of Excel use.

Compress two .jar file into a new .jar file

Hi all, i would like to ask it there anyone know how to compress two or more .jar file into one new .jar file?
because i'm currently need to engage with one big project which have to add 34 .jar file into JCreator, so that the relevant classes can be found when compile the code.
another question is, what is the maximum archive can be add into JCreator? is it limited or unlimited?
So, any idea from you all?
Regards,
poh_cc

You should probably ask the authors of JCreator about the limitations of it.
The classloader can't read jars from jars and I would advice against extracting all jars and jar all classes into one big fat jar.
Kaj

Acrobat XI PRO: Create a Table of Contents (TOC) automatically in top, after I have combined several pdf.files into a single pdf.file

Hey
I have now tried for hours, but now I give up!
MY WISH -
Create a Table of Contents (TOC) automatically after I have combined several pdf.files into a single pdf.file.
I have already bookmarks, shown on the screen (see screenshot below) but I want those bookmark to be visualised in a separate TOC in the top of the combined files.
This new TOC (which I have inserted) shall be printable and serve as a cover page in a binder.
I have seen other cheap pdf.programs in the market (e.g. PDF Converter Professional 7.3) which are able to make the above things, easy, fast and nice.
Regards
Ole Bünger, Kristianstad Sweden

Somewhat roundabout way but this should work:
Is there easy way to print bookmarks Acrobat Pro 9.5

I'm trying to write an Applescript: when I add a file to a folder, I want finder to name it "1" and increment the other files in the folder by 1. i.e. once I drop a new file into the folder, the file originally called "1" will be renamed "2" etc

I'm trying to write an Applescript. I have never used Applescript but my boss has just asked me to write a script so I dutifully nodded and said "Yes Boss"...
The funtionality I need is that I want finder to rename the files in folder when I drop a new file in. When I add the new file (file neame: "1") to a folder, I want to increment the other file names in the folder by 1.
So when I drop a my new "1" file into the folder, the file original file called "1" will be renamed "2", the original file named "2" will be renamed "3" etc
I'm creating a 'stream' of images. When I add a new image i want it to nudge the other images in the folder along.
Thanks guys!

Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/1986834#1986834

Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

I don't think that Adobe offers any software to convert .azw4 files. Search Google for alternate converters.

Concatenate multiple pdf files into one single postscript file

Hi,
Could anyone help me with a code to "Concatenate Multiple pdf files into one single postscript file" ?
Thanks for the help

Thanks for your reply! Actually the main purpose is to allow user to select multiple pdf documents on a single web page and then he should be able to print all of them at once by hitting the print button on the web page instead of selecting each document seperately to print it. Also he should be able to see all the printing services available to print those documents.
Thanks,

How to include a .js file into .jsp file.[.js file resides in a package]

Similar Messages

Maybe you are looking for