How to include an API

Where can I download javax.comm API from ?
How to install/use in a program ?

Go to http://java.sun.com/products/javacomm/ and click download link at the left corner. To install, read the documentation.

Similar Messages

How to include Portal API's

Hi,
how can I include the Portal and the PCD GL API.
Where can I get these .jar files?
I installed the PDK and tried to get the jar's from there but I got an error by doing that. Also changing the property (as described) in the Visual Administrator did not work.
Thanks in advance,
Thomas

Hi Francisco,
I have to develop a Web Dynpro Tool, which should be able to create Folders, iViews, Pages ...
in the Portal Content Directory. (Not with the Portal Admin Studio, but programmatically)
Therefore I need the two API's (Portal API and PCD GL API)
Under <a href="http://help.sap.com/saphelp_nw04/helpdata/de/df/eb5c42da4de92ce10000000a1550b0/frameset.htm">help.sap.com</a>
I followed the instructions to create an iView, but I wasn't able to include all the needed classes, because I can not find the .jar files (for these API's) to include into the DevStudio.
I searched in the Filesystem and tried to get these files from the PDK, but I have not found it till now.
Where can I find these files?
com.sap.portal.ivs.api_iview_api.jar
com.sap.portal.ivs.api_landscape_api.jar
Thanks in advance,
Thomas

How do u include relevant api's in build.xml when using Ant ?

I am attempting to move from using KToolbar to using Ant to build my midlets.
I have succesfully built a simple midlet but need to know how to modify the build.xml file to include specific api's my application may use such as:
WMA, J2ME Web Services, MMAPI, or specific phone api's like Nokia.
Can anyone help?

You need to specify the wtk.midpapi so that it points to the classes you need:
<property name="wtk.home" value="[fill in the path to the appropiate SDK's class library]]"/>shmoove

How to include .jar files in coldfusion code

To Integrate our cfm code with paypal jar files we do the
following steps with our local coldfusion server ,and to run and
integrate the paypal Java SDK jar files, I think we need to do the
same process on the server, can you suggest any thing to do the
following setting for my domain on the server, without setting the
class path in coldfusion administrator.
The ColdFusion application server must be configured to know
the location of the PayPal JAR
files, and your ColdFusion Markup (CFM) pages must be
configured with the absolute path to
the PayPal API certificate for the PayPal API user on whose
behalf the calls are made.
1. Install the PayPal Java SDK “Installing the
SDK”.
2. Copy a subset of the Java SDK JAR files to a location
accessible by the ColdFusion
application server. The JAR files are in SDK_root\lib and
their exact names are as
follows:
– bcmail-jdk14-128.jar
– bcprov-jdk14-128.jar
– paypal_base.jar
– paypal_stubs.jar
sax2.jar
– xerces.jar
– xpp3-1.1.3.4d_b4_min.jar
– xstream.jar-1.1.3.jar
3. With the ColdFusion Application Server Administrator, add
the absolute path of the
location you determined in Step 2 to the Java and JVM
CLASSPATH environment variable.
4. Restart the ColdFusion Application Server.
Suggest me how to include .jar files without setting
classpath.

> Suggest me how to include .jar files without setting
classpath.
Copy them to {CF_HOME}\lib, where {CF_HOME} is, for example,
C:\CFusionMX7. Restart Coldfusion.

How to include package

sir
i m running an mil application and i have an error in import javax.mail.*
statement.that package does not exist
how to include it in path.........
plz help me out
thank you
gaurav

hi,
u need to have two jars,namely,mail.jar and activation.jar in your classpath
to use the javamail apis.hope this is of any help
bye,

How to include user_sequences in a dbms_datapump procedure

how to include user_sequences in a dbms_datapump procedure
hi,
i have a procedure to move all tables from MYSCHEMA_1 to MYSCHEMA_2 over a db_link
using dbms_datapump ;
That works fine
but i need to copy the user_ sequences too.
a detail if my procedure looks like this :
## create Job in TABLE-Mode :
job_handle := dbms_datapump.open (
     operation      => 'IMPORT'
,job_mode => 'TABLE'
,remote_link           => p_database_link
,job_name      => vjob_name
## exclude same Tables:
dbms_datapump.metadata_filter (
     handle          =>     job_handle,
     name          =>     'NAME_EXPR',
     value          =>     'NOT IN (''TABLE_EXC_1'', ''TABLE_EXC_2'' , ''TABLE_EXC_3'' )'
I found this to work with plain EXPDB :
EXPDB INCLUDE=SEQUENCE: in ('SEQ','SEQ2') INCLUDE=TABLE: in ('TABLE','TABLE2')
How to include user_sequences when working with dbms_datapump - API,
maybe working with dbms_datapump.metadata_filter ?

HI,
you are right,
to include SEQUENCES and other Objects like VIEW or FUNCTION
does only work in SCHEMA-Mode
But the next problem is
when want to refresh the dump
I can refresh the tables only
dbms_datapump.set_parameter(
handle      => job_handle,
name      => 'TABLE_EXISTS_ACTION',
value      => 'REPLACE'
not the other objects like SEQUENCE or FUNCTION
found in OracleSupport Note 1323411.1
would nice to have a parameter OBJECT_EXISTS_ACTION in future

How to include an ASP page from JSP?

I had a working ASP page to be repeated on each page of the web site as an navigation bar updated from a single SiteMap.xml. Anyone knew how to include the ASP page from the JSP app?
Thanks

You might achieve your desired result by calling the ASP page from your JSP controller (server side) using the standard JAVA HTTP classes you could then process the resulting XML. I suggest you look at the JAVA API for more information in particular the JAVA.NET package and the HTTPUrlConnection class...
http://java.sun.com/j2se/1.4.2/docs/api/java/net/HttpURLConnection.html
Hope this helps,
BRgds,
Simon

How to read the API

I am trying to understand how to read the Java API. I have bought Oracle's Books "Java The Complete Reference" and "Java A Beginners Guide" but am still unsure how to read the API.
Let me clarify what I'm asking to avoid confusion.
The class java.util.ProcessBuilder http://download.oracle.com/javase/7/docs/api/
Has a Constructor section that lists
Constructor and Description
ProcessBuilder(List<String> command)
Constructs a process builder with the specified operating system program and arguments.
ProcessBuilder(String... command)
Constructs a process builder with the specified operating system program and arguments.
How do I read the ProcessBuilder(List<String> command) so that I can understand it and implement its use?
Later when it talks about methods such as List<String> command()
Returns this process builder's operating system program and arguments.
How do I understand this and make use of the method?
Is it possible for this to be explained to cover the whole API so that when a class is looked up the constructor and methods are explained that someone who does not understand can take any class and have the constructor and methods from the API and know how to implement them?
Thank you
FtroopSon

FtroopSon wrote:
My Instructor said we can not work with others on our project, so instead of violating that rule, I asked something about JAVA here. My question was general enough to not violate the instructors rule, but specific enough to learn what I felt I was missing.I hope you don't think I was suggesting you're doing anything wrong - far from it - I was simply saying that ProcessBuilder isn't the first class I would choose if I was trying to get familiar with the Java API pages.
As with a lot of questions like this, Google is your friend. A Google of "using ProcessBuilder" gave me a pile of useful pages on how to use the class (which the API docs aren't always wonderful at doing), including some common 'gotchas' - although many of these are related to <tt>Runtime.exec()</tt>, which Process/ProcessBuilder was created to improve.
One of those pages was for [url http://commons.apache.org/exec/index.html]Apache Commons Exec, which you might also want to look at (although it does require a download, and that might violate the rules of your exercise too). I've never used it myself though, so I can't comment on how good it is.
Alternatively, it might be worth talking to your instructor and explaining your problem. Most of us are reasonable chaps, and s/he might be able to provide you with some good tips.
Remember: plagiarism is the programmer's stock-in-trade. There's nothing wrong with using something written by someone else as long as you attribute it - that is, after all, what classes are all about :-).
Winston

How to include local chains into meta chain

Hi Experts,
Could any one pl help me how to include 3 local chains in to a meta chain.
first i am creating local chains
Thanks in Advance
Nitya
Please check the forum before posting
Edited by: Vikram Srivastava on Sep 24, 2010 4:43 PM

Hi Nitya
Nothing much to explain about it but any ways
First create separate chains for all 3 local chains and create a meta chain include all this 3 in that
Meta Chain steps:
If the chains are dependents on each other then create as below
Start process -> local chain1>local chain2-->local chain3.
If the chains are independent loads then
Start process ---> local chain 1,2,3 place it in parllel.
Precaution: ensure that you local chains start process should place the maintain process radio button set to "Start using meta chain or API".
Please find the help link for the same : [Creating process chains and schedules|http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm]
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
H. Nitya wrote:
> Hi Experts,
>
>
> Could any one pl help me how to include 3 local chains in to a meta chain.
> first i am creating local chains
>
>
> Thanks in Advance
>
> Nitya

Including Maths API in the Midlet

Hi,
i want to add maths api so i can perform some math calculation and make a scientific calculator but i dont know how to include it in my midlet can any1 please guide me as what to do and what code i write in the improt java line so its included
thanx alot
please reply early

I mean to say, if you math API used existing classes from java.lang.*(KVM) then you can have not to worry just create a package with math API and use it.

How to include old invoices in the invoice list

How to Include old billing documents in the invoice list.
TO be more clear:-
I created 20 invoices in the monthof JAN
I maintained the factory calender in the payer master in the month of Feb 1st and created 10 more invoices in this month.
So the system is considering only the invocies which were generated after I maintained the factory calender (Only feb invoices).
Is there any process to include the previous invoicies (Jan invoices) also to get include in the invoice list.
Help me in this regards.
Regards,
Mallesh.

It is not possible.
Regards,
Rajesh Banka

How to include a jsp page in another jsp jsp page

hi,
i m trying to include a jsp page name "header.jsp" into one jsp page name"selectattribute.jsp" i m using these commands in "selectattribute.jsp"
<%@include file "header.jsp"%> bcz both these jsp page are C:\program files\tomcat 4.0\webapps\examples\jsp\Poject\
but the problem is that , i m invoking this jsp page "selectattribute.jsp" from a servlet reportcontroller.java using REQUEST DISPATCHER.
the servlet is in
C:\Program files\tomcat 4.0\webapps\examples\WEB-INF\classes\Project\
i want to know how to include some other jsp page in a jsp page and how to invoke applet from jsp page when that particular jsp page is being invoked by servlet.
plz help
manish

use this for including in your selectattribute.jsp
<jsp:include page="header.jsp" flush="true"/>
I never tried calling an applet. I think you can write the code for calling the applet in a javabean method and call the method in the jsp

How to include one view into another view

Hi SDN's,
               Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
                          LIKP-KUNNR -> KNA1-ADRNR
                          KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
    LIKP-ERNAM -> USR21-BNAME.
    USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
    USR21-PERSNUMBER -> ADR6-PERSNUMBER.
   In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.

hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim

HOW to include a reference currency fields in a view ?

Hello Experts,
<b>I am having Currency fields error in generic extraction</b>
I have table where I am trying to extract data to BW via generic extraction. When I tried
to extract with the TABLE its giving me an error
<b>Invalid extract structure template RPSCO of DataSource ZBW_REP3_TEST
You tried to generate an extract structure with the template structure RPSCO. This operation failed, because the template structure quantityfields or currency fields, for example, field WLP00 refer to a differenttable</b>.
Now I created a view with all the fields same as my table.
But its still giving me the same error and taking all the fields as a primary keys. I have over 12 currency fields in the table. I am confused how to fix this issue and add a currency field to my view?
hOW to include a reference currency fields in a view ?
All inputs are much appreciated.
Thanks and Regards,
Harish

Thank you for your responce,
Can you please check my view and let me know where I am going wrong
View    Table   Field Dataele Data
field                    type                                            0
WLP01     RPSCO     WLP01     BP_WPL     CURR     15     Period value in ledger currency
WLP02     RPSCO     WLP02     BP_WPL     CURR     15     Period value in ledger currency
WLP03     RPSCO     WLP03     BP_WPL     CURR     15     Period value in ledger currency
WLP04     RPSCO     WLP04     BP_WPL     CURR     15     Period value in ledger currency
WLP05     RPSCO     WLP05     BP_WPL     CURR     15     Period value in ledger currency
WLP06     RPSCO     WLP06     BP_WPL     CURR     15     Period value in ledger currency
WLP07     RPSCO     WLP07     BP_WPL     CURR     15     Period value in ledger currency
WLP08     RPSCO     WLP08     BP_WPL     CURR     15     Period value in ledger currency
WLP09     RPSCO     WLP09     BP_WPL     CURR     15     Period value in ledger currency
If I add a
Table TCURC against any field what would be the view field and data element
Do I need to tick MOD?
Please suggest.
Kapadia,
If I do that its still taking all the fields are a primary keys and bringing 6 lakh records to where I originally have 49 records in a table
Thanks and Regards,
Harish

How to get GP API for EHP1 NWDS n how to create a WDP iview in EHP1

Hi Frndz...
I have 3 Qun's..
1) How to get GP API in EHP1 NWDS7.1 in NWDS 7.0 we can get by D/L gp_api_nw04s.zip,gp_TopLevelDCs.zip and xtracting these to
Location to Extract gp_api_nw04s.zip=>
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\eu\gp
Location to Extract gp_TopLevelDcs.zip=>
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\SCs\sap.com\CAF\_comp\TopLevelDCs
i done the same thing like above for NWDS 7.1(EHP1) but am not getting the GP Dependcies for development.How can i resolve this.
2) When am deploying the app with CE7.1(EHP1) app is deploying well but when output coming on browser its giving error , n i changed the browser settings in NWDS to all options but no use.
3)Am doing CO in which i have two action buttons(result states)for this am going like this
In getDescription()
IGPCOResultStateInfo success = technicalDescription.addResultState("Success");
success.setDescriptionKey("Success_desc");
IGPCOResultStateInfo reject = technicalDescription.addResultState("Reject ");
reject .setDescriptionKey("Success_desc");
In complete()
executionContext.setResultState("Success");
executionContext.setResultState("Reject");
executionContext.processingComplete();
but after creating the action-->CO am finding only Success Result State only(no Reject Result State), anybody tell me what wrong am doing.
In my case i have to Result states Accept n Deny , if Approver1 clicks on Accept button flow has goes to Approver2 if not it should goto initiator how zit ??.If anybody have idea plz share with me .

hi rajeshkelam,
check this link you can get the api of gp of ehp ce
http://help.sap.com/javadocs/nwce/current/gp/com.sap.gp/index.html
let me know u need any further info
bvr

How to include an API

Similar Messages

Maybe you are looking for