How to include attributes as parameters in a query?

Dear Gurus,
I need to create a parameter/filter in a BEx query using the attributes of 0MATERIAL like 0BRAND and 0CATEGORY. How do i do it? Thanks a lot in advance for the time and help.
Raj
Message was edited by: Raj Singh

Hi Raj,
check in TA RSD1 for 0MATERIAL if the attributes 0BRAND and 0CATEGORY are type <b>NAV</b>.
If they are NAV you should be able to set the parameter/filter in the BEx-Query designer.
Kind regards
Klaus

Similar Messages

How to include attributes in BEx?

Hi,
I am using Infoset for BEx reporing and I want to drag attribute fields which is in Key Dimensions but not able to do the same.
Ex:
Key Dimensions:
SALES OFFICE ID
-->Attributes(Sales Rep ID,Office location and etc).
I can drag Sales office ID into Rows and the same time I need to include some of its attributes. How to do in BEx repoting on Infoset.
Please guide me.
Regards,
KS
Message was edited by:
K S
Message was edited by:
K S

Hi KS,
First you drag the field which is in the key dimensions and then right click the field and you get a pop up list, there select the attributes which you require for the field.
Thanks & Regards,
Sunil
Note: Give points if you meet your requirements.

How to include non database item in the query

Hi
I have a Master-Detail form. where in the detail block one of the field is text item 'X' attached the list of values(Y). Master block includes non database items which is based in the decoding result of the database items for example:
Gender(Male, Female)>> non database item
Gender_id(M,F)>>database item
the form is created based on the template.fmb form for apps. When I run the form in the query mode, i can query about any database item while including query about others non database item does not affect.
how to can i modify it so this could be handled??
I know that one way to avoid this issue is to create a view with all my desired field.
but there should be away to override the build in query used by oracle apps...
any one has a link, source, document... etc that help on this??
any idea how to do it without creating a view??
thnx alot

Hi HST,
You can code the handling in POST-Query of the corresponding block to retrive the corresponding data depending on the Queried data.
Regards,
Kiran

How to keep the input parameters in a query (WAD report)

In some WAD reports, we have to record the report name and the user name (which user use the report) and what the selection criteria the user input. How can we do?
Thank you
Michelle Lee

Hi.
Report name: create user exit variable (lets say Z_QUERY_NAME) with following code at I_STEP=2
WHEN 'Z_QUERY_NAME'.
DATA lv_compid TYPE rszcompid.
CLEAR lv_compid.
IMPORT compid = lv_compid FROM MEMORY ID 'COMPID'.
l_s_range-low = lv_compid .
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
User name: crate user exit variable (lets say Z_USER) with following code at I_STEP=2
WHEN 'Z_USER'.
CLEAR l_s_range.
l_s_range-low = sy-uname.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
Then in WAD create 2 InfoField webitems. Set dataprovider and select variables for info fields.
Regards.

How to make Multiple parameters to sql query string seperated by ,(comma) ..

Hi,
I would like to konw how I can make multiple parameters to sql query string seperated by ,(comma) ..
For example, this parameters can be printed like 'abc,dde,ggf,eeg' ,once I use "join(Parameters!rpCode.Value,",")" with report builder ,
By the way, when I test this multiple parameters by Query Designer of report builder there was no problem,.(using Define query parameters, I put abc,dde,ggf,eeg)
however, when I run this report , it won't be executing , with (rsErrorExecutingCommand)
Plz, help me....

If its sql query then it should like this
Select t.*
from table t
inner join dbo.ParseValues(@Parameters,',')f
on f.val = t.ID
ParseValues can be found him
http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
or easier way is
Select t.*
from table t
where ',' + @Parameters + ',' LIKE '%,' + CAST(t.ID AS varchar(10)) + ',%'
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to include Navigational attribute in the selection screen

Hello All,
Can any body please tell me how to include a navigational attribute in the selection screen in BEX?

Let´s go step by step.
In your example, you mentioned the characteristic called 0MAT_PLANT. Its navegational attributes are allocated in the same dimension the main characteristic belongs. So 0MRP_CONTRL, as a navegational attr. must be allocated in the same dimension as 0MAT_PLANT.
1) In query designer in Bex (left pane) find the dimension where 0MAT_PLANT is allocated. Find the navegational attr. in the same dimension, 0MRP_CONTRL. Pls verify you are looking to a navegational attribute, activate technical names and the name of the attr must be 0MAT_PLANT__0MRP_CONTRL.
2) Below the attribut (still left pane) you will find a Variable icon (yellow). If you see the "+" symbol, it means that at least one variable exists (standar or not). Open it and check if the variable suits your requeriment to set it in selection screen. If not, create a new one (let me know if you need help with this task).
3) Once you have your variable for the navegational attribute, drag and drop it to the design area (row, column, filter).
4) Verify the order you want this variable to appear from the menu bar: Query properties -> Sequence of Entry Variables.
Hope this helps. Leticia
Edited by: Leticia Laura Locatelli on Oct 1, 2008 10:41 PM

How to include body of the mail along with attachment using the below FM

Hi All,
I am using the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' to generate an e-mail with excel file as attachment. Can you please let me know how to include body of the e-mail along with this attachment.
Thanks & Regards
Gowthami

hi,
see this code
TABLES: apqi.                         "Queue info definition
TYPES DECLARATION
*& Global Types
TYPE-POOLS: slis,                     "Type for alv list
            sx.                       "SAP connect
TYPE-POOLS: list.
*& Types
TYPES: BEGIN OF s_itab_apqi.
        INCLUDE STRUCTURE apqi.
TYPES: END OF s_itab_apqi.
           INTERNAL TABLE / WORK AREA DECLARATION             *
*& For email attachment
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        it_contents      LIKE solisti1 OCCURS 0 WITH HEADER LINE ,
        it_receivers     LIKE somlreci1 OCCURS 0 WITH HEADER LINE ,
        it_attachment    LIKE solisti1 OCCURS 0 WITH HEADER LINE ,
        it_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE .
DATA:   v_cnt            TYPE i                                   ,
        v_sent_all(1)    TYPE c                                   ,
        v_doc_data       LIKE sodocchgi1                          ,
        gd_error         TYPE sy-subrc                            ,
        gd_reciever      TYPE sy-subrc                            .
DATA: p_email   TYPE somlreci1-receiver
                             VALUE 'mail id here of the reciever'.
*&   Variable for attachment name
DATA: v_attach(12).
*&   Internal table to get data from apqi table
table here
DATA: ws_line TYPE slis_listheader.
DATA: it_list_top_of_page TYPE slis_t_listheader.
CONSTANTS : v_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
VARIABLE DECLARATION
DATA: v_colpos        TYPE i.
DATA: v_transcnt(10) TYPE c,
      v_transcnte(10) TYPE c,
      v_transcntf(10) TYPE c,
      v_msgcnt(10)    TYPE c,
      v_qid(20)       TYPE c.
DATA v_tot_rec(3)    TYPE n.
DATA :v_date(10) TYPE c,
      v_time(8) TYPE c .
DATA: v_fromdate(10) .
DATA: v_todate(10) .
SELCTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-015.
PARAMETERS:
SELECTION-SCREEN END OF BLOCK blk1.
AT SELCTION SCREEN
AT SELECTION-SCREEN.
IF p_dfrom IS INITIAL AND
     NOT p_dato IS INITIAL.
    MESSAGE e000(zp) WITH text-020.
ENDIF.
START OF SELECTION
START-OF-SELECTION.
*& To get data from APQI table into internal table
PERFORM populate_itab.
**To Populate table with details to be entered into .xls file
PERFORM build_xls_data_table.
END OF SELECTION
END-OF-SELECTION.
*& To display ALV list when IT_APQI is not initial
IF NOT it_apqi[] IS INITIAL.
*&-- Send an Notification email
    PERFORM send_email .
*&--To populate fields for ALV
    PERFORM build_fieldcat   .
    PERFORM build_eventcat   .
    PERFORM e04_comment_build USING it_list_top_of_page[].
    PERFORM build_layout     .
    PERFORM build_sortcat    .
    PERFORM start_list_viewer.
ELSE.
*&-- If no record exists in IT_APQI internal table then message is displayed
    MESSAGE s000(zp) WITH text-021.
ENDIF.
FORMS **********************************
populate itab here -
*&      Form BUILD_FIELDCAT
FORM build_fieldcat .
ENDFORM.                    " BUILD_FIELDCAT
*&      Form BUILD_EVENTCAT
FORM build_eventcat .
DATA: v_header(25) .
CONCATENATE 'ZPIPY016' p_dfrom p_dato INTO v_header.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_eventcat[]
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
READ TABLE it_eventcat WITH KEY name = slis_ev_top_of_page
                             INTO wa_eventcat.
IF sy-subrc = 0.
    MOVE v_formname_top_of_page TO wa_eventcat-form.
    APPEND wa_eventcat TO it_eventcat.
ENDIF.
ENDFORM.                    " BUILD_EVENTCAT
*&      Form BUILD_LAYOUT
FORM build_layout .
ws_layout-no_keyfix           = 'X'.
ws_layout-group_buttons       = 'X'.
ws_layout-colwidth_optimize   = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form BUILD_SORTCAT
FORM build_sortcat .
CLEAR wa_sortcat.
CLEAR v_colpos.
ENDFORM.                    " BUILD_SORTCAT
*&      Form START_LIST_VIEWER
FORM start_list_viewer .
DATA: ws_pgm LIKE sy-repid.
*& To Display ALV list
ws_pgm = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = ws_pgm
      is_layout          = ws_layout
      it_fieldcat        = it_fieldcat
      it_sort            = it_sortcat
      i_save             = 'A'
      it_events          = it_eventcat
    TABLES
      t_outtab           = it_apqi
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
ENDFORM.                    " START_LIST_VIEWER
*&      Form BUILD_XLS_DATA_TABLE
FORM build_xls_data_table .
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
             con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
*& To populate it_attach table to be send as email.
CONCATENATE 'Error of transaction SM35' ' '
     INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
*& To gettotal number of error records
DESCRIBE TABLE it_apqi LINES v_tot_rec .
CONCATENATE 'Number of Errors = ' v_tot_rec
            INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
CONCATENATE text-001
              text-002
              text-003
              text-004
              text-005
              text-006
              text-007
              text-008
              text-009
              text-010
              text-011
              text-012
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
*& To populate it_attach from it_apqi
LOOP AT it_apqi INTO wa_apqi.
*& To get the date format in DD/MM/YYYY
    WRITE wa_apqi-credate TO v_date DD/MM/YYYY.
*& To get time format in hh:mm:ss.
    v_time = wa_apqi-cretime.
    CONCATENATE v_time(2) ':' v_time2(2) ':' v_time4(2) INTO v_time.
    v_transcnt = wa_apqi-transcnt.
    v_transcnte = wa_apqi-transcnte.
    v_transcntf = wa_apqi-transcntf.
    v_msgcnt    = wa_apqi-msgcnt.
    v_qid       = wa_apqi-qid.
    CONCATENATE wa_apqi-groupid wa_apqi-creator
                     wa_apqi-qstate v_date
                     v_time wa_apqi-progid
                     wa_apqi-userid v_transcnt
                     v_transcnte v_transcntf
                     v_msgcnt v_qid
               INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach .
    CLEAR   it_attach .
    CLEAR: v_transcnt ,
            v_transcnte,
            v_transcntf,
            v_msgcnt   ,
            v_qid      ,
            v_date     ,
            v_time     .
ENDLOOP.
ENDFORM .                    " BUILD_XLS_DATA_TABLE
*&      Form POPULATE_EMAIL_MESSAGE_BODY
FORM populate_email_message_body .
REFRESH it_message.
it_message = 'message here'.
APPEND it_message.
CLEAR it_message.
ENDFORM.                    " POPULATE_EMAIL_MESSAGE_BODY
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
FORM send_file_as_email_attachment TABLES pit_message
                                          pit_attach
                                    USING p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 CHANGING p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email               = p_email         .
ld_mtitle              = p_mtitle        .
ld_format              = p_format        .
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename      .
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
v_doc_data-doc_size = 1.
Populate the subject/generic message attributes
v_doc_data-obj_langu = sy-langu.
v_doc_data-obj_name = 'SAPRPT'.
v_doc_data-obj_descr = ld_mtitle .
v_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR v_doc_data.
READ TABLE it_attach INDEX v_cnt.
v_doc_data-doc_size =
     ( v_cnt - 1 ) * 255 + STRLEN( it_attach ).
v_doc_data-obj_langu = sy-langu.
v_doc_data-obj_name   = 'SAPRPT'.
v_doc_data-obj_descr = ld_mtitle.
v_doc_data-sensitivty = 'F'.
CLEAR it_attachment.
REFRESH it_attachment.
it_attachment[] = pit_attach[].
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = ld_format.
it_packing_list-obj_descr = ld_attdescription.
it_packing_list-obj_name   = ld_attfilename.
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
Add the recipients email address
CLEAR it_receivers.
REFRESH it_receivers.
it_receivers-receiver = ld_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
APPEND it_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = v_doc_data
      put_in_outbox              = 'X'
      sender_address             = ld_sender_address
      sender_address_type        = ld_sender_address_type
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = v_sent_all
    TABLES
      packing_list               = it_packing_list
      contents_bin               = it_attachment
      contents_txt               = it_message
      receivers                  = it_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT it_receivers.
    ld_receiver = it_receivers-retrn_code.
ENDLOOP.
ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT
*&      Form SEND_EMAIL
FORM send_email .
Populate message body text
PERFORM populate_email_message_body.
PERFORM send_file_as_email_attachment
                               TABLES it_message
                                      it_attach
                                USING p_email
                                      'Error Sessions from SM35'
                                      'XLS'
                                      'filename'
                                      v_attach
                             CHANGING gd_error
                                      gd_reciever.
ENDFORM.                    " SEND_EMAIL
*&      Form E04_COMMENT_BUILD
      text
     -->E04_LT_TOP_OF_PAGE text
FORM e04_comment_build USING lt_top_of_page TYPE slis_t_listheader.
CLEAR: v_fromdate,
         v_todate.
WRITE p_dfrom TO v_fromdate DD/MM/YYYY.
WRITE p_dato TO v_todate    DD/MM/YYYY.
*& To write header in ALV list
*& Program name
CLEAR ws_line.
ws_line-typ = 'H'.
ws_line-info = text-016.
APPEND ws_line TO lt_top_of_page.
CLEAR ws_line.
ws_line-typ = 'S'.
ws_line-key = text-018.
ws_line-info = v_tot_rec.
APPEND ws_line TO lt_top_of_page.
*& Date from
CLEAR ws_line.
ws_line-typ = 'S'.
ws_line-key = text-050.
ws_line-info = v_fromdate.
APPEND ws_line TO lt_top_of_page.
*& Date to
CLEAR ws_line.
ws_line-typ = 'S'.
ws_line-key = text-051.
ws_line-info = v_todate.
APPEND ws_line TO lt_top_of_page.
ENDFORM.                    "E04_COMMENT_BUILD
      FORM TOP_OF_PAGE                                              *
FORM top_of_page.
*& To write Heading in Top of page
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_list_top_of_page.
ENDFORM.                    "TOP_OF_PAGE
thanks

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to use SET & GET Parameters in Module Pool

Hi Friends,
Can anyone please tell how to use SET / GET parameters and PARAMETER ID for a text box (Input / Output field ) in module pool? What is the purpose and where do we need to do coding for it?
Note : I will definitely give the marks for good responses.
Thanks in advance,
Pradeep

Hi Pradeep,
You can save values in the SAP memory using a parameter ID. These
are user and terminal-session specific, but available to all internal and
external sessions.
SET Parameter copies the corresponding field contents into the SAP
System memory in the PAI processing block.
GET Parameter copies the corresponding field contents from the SAP
memory at the end of the PBO processing block, after data has been
transferred from the program, if the screen field still has its initial value
You can link an input/output field to an area of the SAP memory in the
ABAP Dictionary.
When you use an input/output field that is defined in the ABAP
Dictionary, its parameter ID is displayed in the Dictionary attribute
Parameter ID in the Screen Painter.
Usage
SET PARAMETER ID: CAR FIELD space,
CON FIELD space,
DAY FIELD space.
Here is the link that explains the usage of GET/SET in detail
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm</a>
Regards,
Sharadha

How to include Material Cost in the SD report

Hi,
I am working on Cube 0SD_C03 for the Sales and Distribution Report "Sales Contribution - Product Wise u2013 KPI" where I have to show the following information which are given below.
1. Total Sales Qty.
2. Total Sales Value
3. Total Material Cost
For third one I do not know how to include this in this SD report.
so please tell me about this if anybody has idea about this?

Hi Francisco,
Note:
your xml should only have
<URL>http://dbxserver.dbxprts.com:7778/pls/apex/f?p=134:1:::NO::P1_ID_CONSTANCIA:1183</URL>
Show me your sample XML , i can help you.
What is your expected output ? PDF or HTML ?
here it is.
option1:
If the XML data includes an element that contains a hyperlink , then you can use that element to create dynamic hyperlinks at runtime.
a. insert hyperlink from word menu
b. In the Type the file or Web page name field of the Insert Hyperlink dialog box, enter the following syntax:
c. {ELEMENT_NAME_WHICH_HAS_URL_LINK}
where ELEMENT_NAME_WHICH_HAS_URL_LINK is the xml data element name
option2:
create a form field, you can add it
<fo:basic-link external-destination="http://www.google..com">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link external-destination="{ELEMENT_NAME}">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link>
<xsl:attribute name="external-destination"><xsl:value-of select="ELEMENT_URL"/>
</xsl:attribute>
<xsl:value-of select="LINK_NAME"/>
</fo:basic-link>

How to know the Post parameters of a form?

Hello
I am developing an application where, I have to login to web site, etc. I am newbie in this kind of development. I can access the web page, retreive the page. So, GET part is working fine. I have problem with Post. I am using JDK 1.6 with apache's HttpClient 3.1 for communicating through the web site. After setting parameters in NameValuePair[], when i run execuseMethod(postMethod), it throws the following exception :
i]Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: host parameter is null
I think, I may be going wrong in providing proper headers, parameters, etc. Can anyone help me know:
1. How can I know what parameters, I need to pass in the POST method. Along with form attributes, their may be any hidden values to be passed. How can I find out that.
2. Their is a submit button, how do i deal with that - tell the post method to click it ?
3. Same with headers. Which attributes needs to be set of headers and what values?
I saw some files on net, where prg'er are adding few other parameters that are hidden - but not all hidden parameters!
Any help is appreciative. Please it would be nice if you can help me out. I am new in this type of development. I have spend 2 days looking out for this problem, but couldn't find any help yet. Please any help at the earliest is benificial.
Thanks
Terry

Ok. To check the host before executing the post methd, I gave :
        HttpConnectionManager connectMgr = client.getHttpConnectionManager(); // ************
        HostConfiguration hc = client.getHostConfiguration();                                 // *************
        if (connectMgr.getConnection(hc).isOpen() == true)                                  // EXCEPTION - hc contents r null
            System.out.println("Connection is OPEN");
        else {
            System.out.println("Connection is ******************* NOT OPEN *************** ");
        method.setRequestBody(data);
        int statusCode = 0;
        try {
            statusCode = client.executeMethod(hc, method);
            System.out.println("Register Send: " + method.getStatusLine().toString());
        }catch (HttpException e) {
            method.releaseConnection();
            System.out.println("HTTP EXception : " + e.getMessage());
        }catch (IOException ie) {
            method.releaseConnection();
            System.out.println("Error Exe Method - Post. Status Code = " + statusCode);
            ie.printStackTrace();
        }HttpConnectionManager has hostname, portNo, httpconnectin isopen -> false
HostConfiguration has host, port, localAddress all null
Due to the null value the exception is thrown. What do I do now? Infact, in my GEt also, I tried the same thing, their also host is null of HostConfiguration, but it works well, as it doesn't have to send anything.I have no clue to move ahead.Also, what must be the content length?
Thanks

How to include images in my app

hi all.
I'm using Apex 2.1 over XE.
I'm sorry but i can't find any thread related to how to include images in my app.
I've uploaded several trough shared componentes / files / images, but don't know how to use it, for example, in an HTML region, as header of the page.
Thanks a lot for your help.
Fernando

Hi,
I have used four different ways to display images in my applications depending on which method is the fastest to refresh.
1. Under Application Attributes > Edit Standard Attributes > Substitutions enter your substitution string (MY_IMAGE_URL) and substitution value(http://somewhere/img)
and then in the region or template use the following syntax &MY_IMAGE_URL. in your html tags eg. img src="&MY_IMAGE_URL./banner.png" width="x" height="x">)
I have found this the best for image refresh speed, especially if the image is already cached.
2. Load your image up into Apex and don't associate it with any application and use the following tag img src="#WORKSPACE_IMAGES#banner.png" width="x" height="x" alt="">
Good for development as all images not associated to an application are available.
3. Load your image up into Apex and associate it with an application and use the following tag img src="#APP_IMAGES#banner.png" width="x" height="x" alt="">
This can be a pain during development when your application numbers continually change.
4. Use standard http address <img src="http://somewhere/banner.png" width="x" height="x">
Ben
Message was edited by:
Benton

How to include the simbol % in a flash chart

hello everyone
Do you know how to include the simbol % in a flash chart?
I am using a 3D flash chart. This simbol obviously would be after that number of percentage.
Do I must modify the chart XML adding some after that {VALUE} ?
Any help would be very appreciated
Thank you in advance
Best Regards

Erik:
You can specify the '%' in the 'Postfix' field in the 'Display Settings' on the 'Chart Attributes' page.
Varad

How to define this FORMAL parameters for a std. SAP itab?

Hello Experts,
Am writing a custom PERFORM in a standard SAP include-RVCOMFZZ by using modification assistant, like below,
RVCOMFZZ:
PERFORM my_routine IN PROGRAM my_report USING com_vbapvb.
(here com_vbapvb is a TABLES parameter with STRUCTURE of vbapvb in the std. sap FM).
my_report:
FORM my_routine USING here_I_want_to_know_the_data_object
ENDFORM.
Here pls. let me know How to define the FORMAL parameters of my_routine? I tried with different options, but did not worked out. Preferable let me know in OOPS concepts (not using TABLES)
Thank you

Hi,
here is example how to write you structure content regardless what com_vbap has field list.
PERFORM my_routine IN PROGRAM my_report USING com_vbapvb.
FORM my_routine USING here_I_want_to_know_the_data_object.
field-SYMBOLS: <field> type any.
do 100 times.
    assign COMPONENT sy-index of structure ls_VBAPVB to <field>.
    if sy-subrc = 0.
      write:/ <field>.
      else.
      exit.
    endif.
enddo.
ENDFORM.
Bye Jan

How to include Forward button dynamically using code?

hello,
i am creating my notification message dynamically using clob type document type attribute , and its working fine. But how i include the Forword Button in my message body.
please advice

i am allready doing that only, in that what will be the name of the button.
can i put like this.
htp.p( '<input type="button" name="forward">');
then what about the event, shall i have to write the code for forward also.
please advice.

How to include attributes as parameters in a query?

Similar Messages

Maybe you are looking for