HOW TO: Include the ALL Spry files into my site
Is there a simple way to include ALL the Spry JS and CSS
files into my site?
Or do I have to manually create each <script> and
<link> tags for each file?
Right now I am creating a CFM page that has all the
<script> and <link> tags so I can just do an include of
that file in my current and future projects. Is this ok? What is
recommended?
Thank you
That solution should work fine. I wouldn't recommend
including files that aren't needed, but that include solution
should be ok.
Similar Messages
-
How to include third party .jar files into my jar file
Hi,
how do i include a open source third party jar file into an executable jar?
i have a class called BlogBox.java and it uses org.apache.commons.net.ftp.FTPClient, i want to create an executable file, where do i put the .jar file containing FTPClient aka Apache Commons Net?
currently i'm getting the following error from when executing my BlogBox.jar
C:\MyJava\BlogBox>java -jar BlogBox.jar
Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/commons/net/ftp/FTPClient
at blogbox.BlogBox.<init>(BlogBox.java:27)
at blogbox.BlogBox.main(BlogBox.java:103)
Any suggestions? i have searched google and this forum but could not find the solution to my problem, thanks
[edited msg] do i need to add the classpath at execution or something of the apache commons net library?
Message was edited by:
gekkokidWhen you use an executable jar the normal class path
is ignored, but you can put a classpath inside the
jar. The usual trick is to place the library jar
files in a directory inside the application directory
and direct the manifest file to it. The manifest file
live in the jar inside the META-INF directory and
it's called manifest.mf
The two heavilly used entries are Main-class: and
Class-path: lines. Class-path just has a
comma-separated list of library paths.
The jar utility has a special option to load it up.Thanks :) I created a "/lib" directory, placed in the packages in there and redirected the Class-Path: lib/commons-net-1.4.1.jar
and it works,
thank you everyone :) -
How can I convert all .fm files into .mif files at one go?
I need to translate a FM12 book that contains 32 chapters = 32 .fm files. Is there any possibility to save all 32 files as .mif files at one go?
And: why does FM12 not remember the last directory I used for saving?
Thx for your answers
SabineHi Sabine,
You can do this with Mif2Go. MIF is not listed as output format on the web-site,
but nevertheless MIF is one of the output options. And Mif2Go is free.
The link is:
Mif2Go converts FrameMaker files to HTML/XML, Help, and Word | mif2go.com
(I do not know why the URL is converted to a descriptive tex automatically; the same below.)
Or the i-frame translation pack (works only in combination with FrameScript):
itl – FrameScript Portal: Convert: FM to MIF / MIF to FM
You might also adapt ExtendScript samples which you can find somewhere, e.g.:
Sample Scripts/Utilities shipped with FrameMaker10 « TechComm Central by Adobe
Best regards
Winfried -
Experts,
I want to download a pdf file stored in a DMS Server into Desktop using webdynpro for abap.
First i want to convert the PDF file into XSTRING, so that i can use file download UI Element in Webdynpro to download the document...
Im searching for any function modules for past two days, i cant able to find it.. I dont even have any idea to proceed.
I tried using CV120_START_APPLICATION in webdynpro,but it results in vain...
I object submission date is nearing, please help me brothers and sisters...
Thanks,
James...Hi James,
please see the thread
Very Urgent Convert DMS document to XSTRING/ download
which deals with exactly the same issue. Maybe we can close one thread and handle this within the second one.
Best regards,
Christoph -
How to include 500 flv streaming files into html?
Hello!
I have 500 flash audio files in flv and want to include them
into a website.
A visitor should see 500 links and should be able to click
them to play the
flv files. But how could I realize this? If I use the Flash
program I can
build a swf file that can play ONE flv file. But I don´t
want to build 500
swf files. Is there an easier way?
Best regards
Marcmarc heiners wrote:
> Hello!
>
> I have 500 flash audio files in flv and want to include
them into a website.
> A visitor should see 500 links and should be able to
click them to play the
> flv files. But how could I realize this? If I use the
Flash program I can
> build a swf file that can play ONE flv file. But I
don´t want to build 500
> swf files. Is there an easier way?
Perhaps have all the link along with flv player within same
file. All the links
load the flv in same player.
It could be XML driven and automatically populated. The
easiest to maintain when
comes to so much content.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
How to include the visa run-time into the installer?
Dear All,
I made an USB device whose driver is developed by "NI visa driver development wizard".
In my program, the COM is also be used. When it is builded and creats the installer, I have checked the Serial Port Suport in Advanced settings in Installer which I thought the visa run-time engine is concluded. In fact, when it is installed, the COM can work correctly, but the USB device's driver can't be installed. To fix it, the visa run-time engine must be setupped again.
I see that I can add it to "run executable after installation" but during the installaion of run-time engine, some pages will be displayed which need user to choose some option.
Would you please give some suggestion that the process of installation is automatic. Certainly the part of visa run-time engine which the USB driver is needed can be integrated to the installer of vi(like COM) is best.
Thank you!
Hugo
PS: I am using LabVIEW 7.1First, you can install a VISA Runtime Engine in the target PC, to verify it is VISA Run Time Engine issue.
If so, you can add a VISA Run Time Engine in LabVIEW when creating an Installer. It is much easy in LabVIEW 8 and still possible in LabVIEW 7.1. Follow the link.
http://digital.ni.com/public.nsf/allkb/E09BA0E2F31D304F86256A640070058E?OpenDocument -
How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense. -
How can I modify the "All My files" search criteria?
Heres my issue: I LOVE the new "All My Files" feature in 10.7... however.. I would like to limit some of the search criteria (which I know goes against its purpose to some degree)... "All My Files" shows every file by kind on my computer, unfortunately it also shows erroneous files in the /Developer folder that I do not care about at all nor are they "mine".
So I have noticed that I can "edit" the "All My Files" property and that it simply seems to be a "saved search" that they put into the Finder side bar... but how do I then say dont include this folder?Finder > Preferences > Sidebar
Put a checkmark in the box beside "All My Files". -
How do I combine all my calendars into one and delete the others?
I have a work computer, a home desktop, and Apple air laptop and an 1phone 4s.
I use Outlook calendar for all my appointments and only need one calendar.
When I get notifications of my upcoming events on the Oulook page and on my iphone, I get multiple notifications, sometimes as many as 6 times.
How can I combine all my calendars into one and delete the others?Your old account is the one you migrated, but it has been renamed because the new account had the same name. "Fixing" this is a bit complicated. It is possible to transfer data from one account to the other. See Transferring files from one User Account to another.
A cleaner solution is to do this:
Create a temporary new admin user account with a completely different username.
Log into this new account.
Delete the new account you created before migrating.
Delete the old account you migrated that has the changed name.
Re-migrate your old account from the Mini.
Log into the newly migrated account and delete the temporary account.
And, the simplest solution is to use the migrated account as-is and delete the account you originally made on the new computer. -
How to include the file name as an XML field
Hi,
I'm using a file adapter for process a flat file and convert it into an XML. Does anybody knows how to include the file name into an XML field.
Ex.
I process the file named <b>XXIMN21022007.txt</b> and I need an XML like:
<MT_FILE>
<field1></field1>
<field2></field2>
<field3></field3>
<filename><b>XXIMN21022007.txt</b></filename>
</MT_FILE>
Regards
GonzaloJust go for dynamic configuration.
Check the sender file adapter to write the filename in the header (as explained in Michal's blog) and then read that header in some mapping.
U can use that even in simple message mappings.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
Your code for the filename tag would be something like:
<i>DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
http://sap.com/xi/XI/System/File,
FileName);
return conf.get(key);</i>
Regards,
Henrique. -
Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio SkovHey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio -
How do I remove "All My Files" icons from the toolbar?
Good Afternoon:
I have A shiny new 15" MBPro that came preinstalled with Lion that I have updated to 10.7.1.
If I open a finder window, there are two "All My Files" icons on either side of the toolbar. I asked a Genius about it and they said they had never seen that. I can remove "All My Files" from the list of Favorites on the left easily enough. I can open up the window to customize the ToolBar, but in that window there are no "All My Files" icons available to add or delete.
How do I remove the "All My Files" icons from the toolbar?
Any advice would be appreciated. Thanks.
Below is a screenshot of the problem.Sort of surprised they didn't know. I'm lost as to why that even appeared on your computer unless you had put them there yourself which, clearly, you didn't if it was brand new out of the box.
Glad it's sorted out. -
How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center? I can select 2 page view and cover page in 2 page view, but the dotted line shows up. Thank you!!
Hi skt102711,
I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
Regards,
Rahul -
I have purchased the program and now how do I convert a PDF file into excel?
I have purchased the program and now how do I convert a PDF file into excel?
Hi johnhnk2,
Please see Getting Started with ExportPDF | Adobe Community.
That document will tell you what you need to know to get started. Please note, however, that it can take 24-48 hours for an order to process fully.
Best,
Sara -
How do yo turn a pdf file into reader so i can edit the form?
how do yo turn a pdf file into reader so i can edit the form?
I have no idea what you are trying to say; your are trying to open a PDF with Reader?
Maybe you are looking for
-
Error while passing checkbox value
hi, i'm passing my checkbox value like this.. first.jsp <%for (l=0;l < row;++l) {%> <tr> <td><input type="checkbox" name="delete<%=l%>" value="<%=tm.getValueAt(l,0)%>"></td> <%}%> second .jsp i call it as int number=Integer.parseInt(request.getParame
-
I have Itunes on my home PC. I'd like to put some of the songs that I have on my pc on my new Iphone but I can't figure out how. HELP!!!
-
I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution
-
I ran a month-long trial version of Acrobat XI Pro to experiment with some of its features.
To do so I had to de-activate the previous licensed version of the same program. Now the trial has expired, I can't seem to reactivate the old software, which came as part of an Adobe Creative Suite package. Any suggestions as to what I could do here
-
Trouble to download free issue on the App Store
We successfully published our multi-issue version of ffw MAG (http://itunes.apple.com/us/app/ffw-mag/id417263570?mt=8) and launched the first edition in February. However, this month, when we uploaded the 2nd FREE issue (via bundler), although the