How to include the new fields added in R/3 into ESS application

Hi Experts,
I have used Standred ESS application.After Importing the ESS application via bapi(Import the model),they have added some more additional fields in R/3 Backend. How to call those customized fields in our ESS application? 
Please help me on this..
Thanks.

There is no specific document/book for the steps i told you....but i can list them as:
1) Goto the Models component in the Webdynpro ...right click -> create new model.
2) Specify the name of the Model as you like ....the RFC destinations...next.
3) Specify the userid and password with RFC authorization in ECC
4) Specify the name of the Function Module you want to import....and Import.
5) Goto the Fc component -> Used Models section and add the model created earlier here..
6) Goto the Fc Component -> Context Tab -> create new model nodes and attributes ...and bind them to Structure fields of the Function Module...
7) Goto the Fc Component -> Interface Controller -> create nodes and attributes ...and bind them to the attributes created earlier
8) Goto the Vc Component-> Context Tab -> create new context nodes and attributes....and bind them to the attributes in the Interface controller....make sure the Fc componentis added as a Used component in Vc.
9)Finally create UI Elements on the Detail or Review view and bind the text property of the element to the attributes created in the Vc component.
Hope it helps.
Shikhil

Similar Messages

  • How to insert the new field to standard scheduling agreement script form.

    Hi Gurus,
    how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
    The below one is my requirement,
    ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
    Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified  
          document date (field EKPO-AEDAT).
    Thanks & Regards
    chinnu

    open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
    se71--->
    &<str. name>-AEDAT&

  • How to Create the new Field ( Table - Row) in SAP B1

    I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase  Document. that filed is not available in form setting.  kindly let me know how to Create a new field in Purchase document.
    Thanks

    Hi,
    I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
    I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
    Thanks.
    Syed Waqar Khurshid

  • How to include a new field for checking duplicate customer master

    Dear All
    we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
    Procedure:
    Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
    Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
    It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
    Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
    regards,

    Hi
    Use the enhancement SAPMF02D to check these values.
    Regards
    Eduardo

  • Giving problem after I included the new field to MCHB table.

    Hi Friends,
    I added one new field called ZZINQNUM to the MCHB table.For this field I created one new data element called ZVBELN_INQUIRY and attached domain VBELN.
    Activated and adjusted  the table.
    Now what the problem is
    I went to SE11 -> Display - > Selected the contents -> In selection screen, I double clicked the ZZINQNUM select-option and selected the equal to space option. For this I am expecting all the records from the table,because in the field ZZINQNUM is empty. But result is zero entries.
    Can any one help me out in this. Thanks in advance.
    Thanks
    Srinu

    Hello Srinivasa
    Two years ago I had the very same problem when I added a new field to an already existing and filled customer table. I debugged the maintenance view and saw that the new field contained an undefined value but not the initial value.
    You could try and use the DB utility (<b>SE14</b>) and activate the table again (of course without deleting the table entries).
    Alternatively, you could write a simple ABAP to initialize the field value, e.g.:
    DATA:
      gs_mchb   TYPE mchb,
      gt_mchb    TYPE STANDARD TABLE OF mchb.
      SELECT * INTO TABLE gt_mchb.
      gs_mchb-zvbeln_inquiry = ' '. " space
      MODIFY gt_mchb FROM gs_mchb
        TRANSPORTING zvbeln_inquiry
        WHERE ( zvbeln_inquiry ne ' ' ).
      UPDATE mchb FROM TABLE gt_mchb.
    Regards
      Uwe

  • How to populate the new field of R/3 in BW

    Hi,
    There was a requirement to modify the sap screen in the R/3.
    For the same a new field is created which populate the data via a table in R/3.
    Now I have to populate the same field in BW. I am working on 3.5 Version.
    In R/3 I have a data source and I am not able to see the same available in the data source
    The field is available in the extract structure but I am unable to populate the same in the data source.
    Kindly help.

    The Data Source is picked from the FM.
    Also,my requirement is to display the text values for the new field
    I am going to create a Generic Master Data which will fetch the data from the table which has fields (Code, Langu and the text) and replicate the same to BW.
    Now to populate the code in BW, I need to have the field in the data source and from there I can add the same code field in the bw comm/tran/etc...
    The code is available in the Extraction and not in the data source.
    At the reporting level I will extract the report based on key and text.
    I tried using ROOSFIELD to populate the field in the datasource, but I am not able to do the same.

  • Process to populate the new field added by AET in Sales Order item

    Hi
    We are on CRM 7.0 , EP1.
    I have added a new field in Sales order item view (UI comp : BT115IT_SLSO  , View :Items).
    The field is called MTO (made to order), it should be populated based on settings in material master.
    I would like to know how can I populate this field with custom logic.
    Thanks
    Swapnil

    Dear Swapnil,
    You can use the following steps to set the default value in field Made To Order:
    1. Enhance Component BT115IT_SLSO and View Items
    2. Redefine method DO_PREPARE_OUTPUT method of the View Controller Class and implement the following sample code:
    super->do_prepare_output( ).
    if iv_first_time = abap_true.
    lr_ent->set_property_as_string( iv_attr_name = 'ZXXX'    " Attribute Name
                             iv_value        = 'YYYY'  )     " Value to be set
    endif.
    This will make sure that the logic to set the value in this field is called only once and not after every event.
    You might not like to redefine the Getter and Setter method because these methods will be triggered after each event in that view.
    Hope this helps.
    Thanks
    Vishal

  • How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

    Hi,
    We have a requirement to add  some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
    For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
    Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
    Thanks,
    Harry

    Hello Harry,
    Goto t.code SPRO ---> Display IMG --->  Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
    Use the above path and create the screen and assign it to the sequence using the below link as reference.
    **************** - Tips - Implementing screen exits for MM01/MM02/MM03
    Regards,
    Thanga

  • How to delete the new user added while install maverick

    while upgrade my os x 10.8 to maverick, it ask me to create a new user.
    after that, a folder for the new user is created in the /Users, but there is no information for this new user in the System Preferences -> Users & Groups,
    i can't event delete this new user in the Users & Groups setting panel.
    so how can i delete this new user?

    That may be because you are logged into the new user.
    In any case, this support article should help...
    http://support.apple.com/kb/TS5292

  • How to enhance the new field(mblnr) into the cube.

    Dear Experts,
                               My client wants GR document number and GR posting date in the drill down option in reporting, i have taken the field names of that. MBLNR and BUDAT, I only found BUDAT in the datasourse field level,please help me how to enchance MBLNR into the cube 0PUR_C01.
    Thank You
    Regards
    Srikanth

    SELF

  • How to include the exchange sub folder's unread mail into the "UNREAD" group in default exchange mail app in iPhone ?

    I am using ios 7.0.2. I have many sub folders in my exchange mail box. Problem is when any mail comes to the sub folder, it is not counted as unread mail and it also does not be visible under the unread mail group. The unread mail group only shows the unread mails which have come directly to inbox but not the mails which comes to the sub folder according to the set rule. Have any one noticed this ridiculous thing? Is there any solution or it's a bug??

    I have the same problem. On the IPad and IPhone I can easilly connect to our Exchange server. When setting up a MacBook Air, using the same settings (account/server address etc) it doesn't work...
    Does anyone have a solution for this?
    Thanks!
    Sander

  • GenIL Model Attribute Structure not getting updated with new fields added

    Hi All,
    I have modelled the service interface using GenIL Modelling in Duet Enterprise 1.0. Later, I added some fields to the read operation in the Enterprise Services Builder in the ESR system.
    But in the Read Operation mapper method "/IWFND/IF_SRD_BOP_MAP_GET_OBJ~MAP_POST_GET_OBJECTS",  when I try to define an object of type GenIL model Attribute Structure (ZMDLZPRGET_DETAIL),  Iam unable to access the newly added fields in the read operation.
    In transaction " GENIL_MODEL_EDITOR ", under Root Objects, when I open the Attribute Structure name, only the old fields are available, newly added fields are not updated.
    But I was able to see the newly added fields in the READ OPERATION data types of Enterprise Services Browser in SE80.
    Please help me how to update the new fields for GenIL Model Attribute Structure(ZMDLZPRGET_DETAIL).
    Thanks,
    Kris

    Hi sap_wiz,
    Thanks for your reply.
    My problem solved,
    Thanks
    Kris

  • How to add a new Field in the Dynamic Selection screen section.

    HI,
    There is a requirement in which I need to add a field in existing program of dynamic selections.
    I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
    which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
    I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
    on the screen.
    LDB used is the Customer Database.
    I have added GET KNKK statement after GET KNA1 statement.
    Can any one help me how we can make this rating field appear in the selection screen.
    With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
    Regards
    Prashant Prabhu

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

  • How to add a new field in the Field Mapping

    Dear Freinds,
                   I have two un used fields in the  Source fields to the Target Fields ,
    i have to add the 3   fields which r there in the my source fields to that
    of the target fields ( as per the change in the requirement) in the 5th Step
    i.e Maintain Field Mapping and Conversion Rules
    the Target strucutre & the Source fields( by clicking the button
    Source field and selcting the fields from the popup menu) in the mapping and conversion step  ,i want to  add  3 fields which are availabe in the list of th source list  which i want to map to the Target strucutre  .
    When i tried it is adding in the othe target field
    presently i have mapping (5th sept ) as below.
       ZPA30_08                       LSMW
           Fields
               TABNAME                      Table Name
                                   Source:  ZP0008_STRC-PERNR (Personnel Number)
                                   Rule :   Default Settings
                                   Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
               TCODE                        Transaction Code
                                   Rule :   Default Settings
                                   Code:    ZPA30_08-TCODE = 'PA30'.
    now i want to add 3 fields Pernr,wage type and Amount  , but when iam trying it is
    getting and saved in the TABNAME .
    How can i map please let me know .
    Regards
    syamla

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

  • How to add a new field in the cube and load data

    Hi,
    The requirement is
    We have  ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
    Please any one can help me with the step by step process of how to do?
    How to get the data into BW and into the report.

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

Maybe you are looking for