How to increase my JMSDestinationRuntimeMBeanConsumers Current ?

How to increase my JMSDestinationRuntimeMBean Consumers Current , I see JMSDestinationRuntimeMBean's Consumer current and Consumers High is 16 i need to increase this so that my messages are been accessed by more consumers in parallel and increase my over all performance.
Any configurations we need to change in Web Logic to get this.
Regards
Satish Kumar

Satish Kumar Ballepu wrote:
How to increase my JMSDestinationRuntimeMBean Consumers Current , I see JMSDestinationRuntimeMBean's Consumer current and Consumers High is 16 i need to increase this so that my messages are been accessed by more consumers in parallel and increase my over all performance.
Any configurations we need to change in Web Logic to get this.
Regards
Satish KumarHi Satish ,
How is this related to database forum ?
Regards
Rajesh

Similar Messages

How to increase current available to a USB port?

My internal optical drive is not working correctly. I am trying to install a MavBook Air SuperDrive, and there is not enough current avalable.
How do increase the current or do I find another Drive.

You can't. It's regulated internally by the chips that provide the USB ports. Put an external power brick on the drive or try a different product that supports use of bus power. You can purchase a bare hard drive and a separate enclosure at OWC

How to increase your battery health - anyone with similar experiences?

this is my very own self made instruction of "how to increase your battery health"
it is the procedure how i have done it serverall times on my powerbook g4 12".
my stats: 374 cycles, health 86% (3790 of 4400mAh)
age of my mac: 57month (battery bit newer)
**if you to try this: it is on your own risk!**
**this may not be suitable for mac newbies**
**be sure to read this twice before you do it once!**
you will need:
-a pocket lamp or comparable light (to see anything on your sreen when it is dark --> light from the back through apple logo)
-coconutbattery (coconut-flavour.com/coconutbattery) or comparable programm to track your battery information in realtime
-activity monitor
-cool enviroment (to ensure your fans don't have to work that much)
-some time and patience
the intructions:
step1: load your mac until the orange light turns green
step2: disconnect the power adapter
step3: use your mac until 15-25% battery life (track this information in your menu bar)
step4: slow down your activities. the order of the following actions depend on your usage of your mac:
__close programms that use lots of cpu/gpu to ensure the fans slow down to 0rpm (!!)
__turn off everything that needs battery power: airport / bluetooth / speakers / etc.
__eject dvd or cd
__close all programms with important data
__eject idisk / .dmg files in your finder (this is not only a matter of data security)
__dissonnected from peripherals such as ethernet / internet / mouse / keyboard
__use lower brightness level
__open activity monitor to ensure that your hard drive activity is very low, may be you need to close more active programms, close activity monitor when hard drive activity is very low
__open system preferences >> energy saver preferences >> choose longest battery life
when your are ready with those actions go on and ensure you are able to connect to power adapter with your mac quickly (be able to charge - don't do it yet!)
step5: be patient. now it should take some time until your battery level goes down to 3-5%
now there should be no programm running.
do not open any programm now!
do not have a look at your dashboard!
now your mac should be really quiet:
-no fans (0rpm!)
-nearly no hard drive activity!!
-->> if this not the case break go on with step 11&12, try again in a week or two
-->> if you are ready go on with step6
step6: open coconutbattery und use the lowest brightness level
play with your trackpad to ensure your screensaver won't start. waste time until you are at 1-2% battery life.
step7: take your lamp and spot through the transperent apple logo, position your coconut battery window somehow that you can see the current battery charge und the maxium battery charge in the spot of your lamp through the apple logo.
step8: go from the lowest brightness level to the level under the lowest brightness level (a dark screen)
step9: watch your current battery charge carefully und keep on playing with your trackpad to ensure your screensaver won't start.
step10: there is kind of battery buffer made of approximately 1% (once when my "current battery charge" was 3624mAh and this kind of buffer was at 36mAh)
to empty this kind of battery buffer takes much longer as you might expect!
when your current battery charge turns under this kind of battery buffer, your maximum battery charge should change. hopefully it is higher or stays the same. when it is lower now: i'm sorry - i have warned you. may be you have to go through this 'how to' more carefully!?
step11: plug in your power adapter before the battery is cero!
step12: load until the orange light turns green
step13: if it was helpful do not repeat it more than once a week, better once a month
-->webcal://www.apple.com/batteries/images/notebook_icalreminder.ics
(via: http://www.apple.com/batteries/notebooks.html)
anyone with similar experiences about increasing battery health!?
(yes, i'm sorry for my poor english, i've tried my best)

Me too! My battery lasts for 10 minutes. It is awful and I am on my 4th power adapter since they keep breaking too.
From coconut battery: Maximum battery charge 310mah, original 4400, age of mac 45 months, 140 cycles.
From system profile:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 310
Remaining Capacity (mAh): 213
Amperage (mA): -1205
Voltage (mV): 11557
Cycle Count: 140
I went to an apple authorized retailer and they said nothing I can do if it is out of warranty.. is this true?

How to increase No. of Connections in Oracle DB?

Hi,
As my team using more no. of connections, I need to increase the number of connections.
Kindly guide me to check the current number of connections and how to change / increase that?
As I don't have knowledge on this, I am looking the detailed input on this.
Kindly guide me, How to check the no. of connections in DB and how to increase that?
Thanks in advance,
Orahar.

Orahar wrote:
As my team using more no. of connections, I need to increase the number of connections.For what type of sessions? That determines whether dedicated or shared server sessions on the Oracle server can be used. Shared server scales a lot better than dedicated servers, but requires specific factors to be taken into consideration (e.g. the move of session UGA from the PGA to the SGA, dispatchers required, etc).
For what server o/s? Windows deal differently with dedicated and shared servers (threads) as Unix/Linux (processes) do.
And why the increase in connections required by your team? Are they using the Oracle server architecture correctly from the client side?
Most 64bit Oracle severs can easily support 1000's of connections (shared server) - but the number of connections are secondary to how the clients are using their Oracle sessions.

How To Increase the Size of Memo Fields 4000 Char in WebCenter 11g?

How To Increase the Size of Memo Fields greater than 4000 Char in WebCenter Content (UCM) 11g?
I was able to increase the size of Memo field from 2000 Char to 4000 by setting parameter value MEMOFIELDSIZE=4000 . But the requirement is to increase the size more than 4000 around 7000 char but Database(Oracle 11G) is not supporting more than 4000 char.
Is there any other way to increase the size of Memo field?
Thanks in Advance!!
Regards
Ram

Hello All,
Thanks for your responses.
Let me explain the scenario again in detail:
1. we have three meta-data fileds xProductCategory,xProductFamily and xProducts
2. These fields are related with DCL feature and corresponding values are being stored in corresponding custom Views
3. xProducFamily is dependent of xProductCategory and xProduct is dependent on xProductFamily
4. currently, there are around 250 Product values and average name of Product can be of 25 Char, so if we are selecting all product values for some Contents then Product Values are being stored in DocMeta table as comma separated values with one space, so total characters are being very high than 4K Char.
5. Currently view that is storing the Product values, stores "Name" column instead of ID(like 1,2,3....)
6. And our Content Server is integrated with Oracle WebSenter Portal, where logic has written to retrieve the contents based on "Product Name" instead of "Product ID" and already we are in UAT phase.Currently we are not in situation to revert the changes from Product Name to Product ID.
7. Also if we are storing the values on the basis of Product ID, then again the issue may arise in Future, if the number of Products increased.
Hoping the issue explanation is clear now and waiting for some possible solution for increasing the length of memo field.
Thanks in Advance !!
Regards
Ram

How to increase the size of sort_area_size

How to increase the size of sort_area_size and what size should be according to the PROD database
Thanks

user10869960 wrote:
Hi,
Many Thanks Charles
Oracle does not recommend using the SORT_AREA_SIZE parameter unless the instance is configured with the shared server option. Oracle recommends that you enable automatic sizing of SQL working areas by setting PGA_AGGREGATE_TARGET instead. SORT_AREA_SIZE is retained for backward compatibility."
--How can i know the instance is configured with the shared server option or not?This might be a tough question to answer. A shared server configuration may be enabled, but the clients may still connect using dedicated sessions, in which case PGA_AGGREGATE_TARGET would still apply.
From
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2088.htm
V$SESSION includes a column named SERVER which will contain one of the following for each of the sessions: DEDICATED, SHARED, PSEUDO, or NONE. As a quick check, you could query V$SESSION to see if any sessions are connected using a shared server connection.
From:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm
There are several parameters which are used to configure shared server support, as well as several views to monitor shared server.
As Robert mentioned, when the WORKAREA_SIZE_POLICY is set to AUTO, the SORT_AREA_SIZE setting is not used, unless a shared server configuration is in use.
--What default value is WORKAREA_SIZE_POLICY and SORT_AREA_SIZE ?From:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams157.htm
"Setting PGA_AGGREGATE_TARGET to a nonzero value has the effect of automatically setting the WORKAREA_SIZE_POLICY parameter to AUTO. This means that SQL working areas used by memory-intensive SQL operators (such as sort, group-by, hash-join, bitmap merge, and bitmap create) will be automatically sized. A nonzero value for this parameter is the default since, unless you specify otherwise, Oracle sets it to 20% of the SGA or 10 MB, whichever is greater."
Actually I am facing performence issue since long time till now i did not get the solution even i have raised SRs but i could not.When the issue occur system seems hang.what i monitored whenever hdisk0 and hdisk1 use 100% the issue occur.
Regards,
SajidWhen you say that you have had a performance issue for a long time, is it a performance problem faced by a single SQL statement, a single user, a single application, or everything on the server? If you are able to identify a single user, or SQL statement that is experiencing poor performance, I suggest starting with a 10046 trace at level 8 (wait events) or level 12 (wait events and bind variables) to determine why the execution appears to be slow. If you have not yet determined a specific user or SQL statement that is experiencing performance problems, you might start with either a Statspack Report or an AWR Report (AWR requires a separate license).
If you believe that temp tablespace usage may be a contributing factor to the performance problem, you may want to periodically run this query, which will indicate currently in use temp tablespace usage:
{code}
SELECT /*+ ORDERED */
TU.USERNAME,
S.SID,
S.SERIAL#,
S.SQL_ID,
S.SQL_ADDRESS,
TU.SEGTYPE,
TU.EXTENTS,
TU.BLOCKS,
SQL.SQL_TEXT
FROM
V$TEMPSEG_USAGE TU,
V$SESSION S,
V$SQL SQL
WHERE
TU.SESSION_ADDR=S.SADDR
AND TU.SESSION_NUM=S.SERIAL#
AND S.SQL_ID=SQL.SQL_ID
AND S.SQL_ADDRESS=SQL.ADDRESS;
{code}
The SID and SERIAL# returned by the above could then be used to enable a 10046 trace for a session. The SQL_ID (and CHILD_NUMBER from V$SESSION in recent releases) could be used with DBMS_XPLAN.DISPLAY_CURSOR to return the execution plan for the SQL statement.
You could also take a look in V$SQL_WORKAREA_ACTIVE to determine which, if any, SQL statement are resulting in single-pass, or multi-pass executions, which both access the temp tablespace.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

How to increase the database size

Hi All ,
Our Client is going to increase their customers from 3.5 million to 5 millions
(12 millions in future ) and there is no increase in the existing licenses..
At present we have very less space in Data base server. We are Going Live at the End of the Month.
How to increase the database size to meet the Client requirements.
we have to increase the No of Processerors etc...
Below are the details of Servers:
System Model: IBM,7040-681
Machine Serial Number: 830D5BF
Processor Type: PowerPC_POWER4
Number Of Processors: 2
Processor Clock Speed: 1904 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 4 bgl-svr-biap
Memory Size: 4096 MB
Good Memory Size: 4096 MB
Note : Server is IBM P690.
1) System Lansdcape --> Two System Landsacpe ( Dev to Prod )
2) BW Version --> 3.5
3) SAP Basis --- > 6.4
4) No of Application servers currently having --> Only One Server
Can any body suggest me how to solve this.....
Thanks in Advance..
Kasi Chukka

Hi Kasi,
Your question is not very clear, from the looks of it, the load on your client's system will be doubling soon.
You need to look at the system stats on how the system is handling the current load, use transactions ST06, ST04 and ST02 to check if the DB hit ratios are as expected, the cpu idle time, the busy periods. Identify if there is large amounts of paging on the server(candidate for increase in real memory).
On AIX level, you will need to look at CPU / Memory usage.
On SAP Application server, you need to look at SAP Buffers.
On Oracle end, look at SGA stats, if it need to increase, the data growth that is current and estimated growth (DB02).
You will not get an exact answer to it, you will need to analyze the existing load and then estimate (guess). The hardware upgrade will also depend on what the client is willing to spend, its always a good practise to add 20% to what you have estimated as these figures are never accurate.
All the best.
Cheers,
Nisch

How you increase the strength / length of an airport extreme?

How you increase the strength / length of an airport extreme? I find it hard to use wireless internet

Please checkout the following Apple Support article on details on the many ways you can extend the wireless range of your current AirPort base station.

How to increase the memory of oracle

Hi,
I am having oracle database version 11.0.1.6 on windows server 2003 R2.
My Server Ram size is 12 GB.
select * from V$SGAINFO;
Fixed SGA Size     1335136     No
Redo Buffers     12529664     No
Buffer Cache Size     1073741824     Yes
Shared Pool Size     176160768     Yes
Large Pool Size     8388608     Yes
Java Pool Size     16777216     Yes
Streams Pool Size     8388608     Yes
Shared IO Pool Size     0     Yes
Granule Size     8388608     No
Maximum SGA Size     1297321984     No
Startup overhead in Shared Pool     58720256     No
Free SGA Memory Available     0
I want to increase my memory for oracle because i need to insert 31 billion rows into a table with nologging. I am inserting them chunk by chunk and commit after each chunk. But it is taking 62 hours to insert the rows. So i think if i increase the memory i could reduce the time to insert the rows.
I really am not sure whether i am thinking in the right way. Please advise. If i want to increase the memory please let me know how to increase it.
Thanks in advance

Are all columns in the WHERE clause indexed?
Are statistics current & accurate for all tables & indexes?
post EXPLAIN PLAN for SQL below
PROCEDURE Pro_unpvt_usm_dr
IS
BEGIN
    FOR k IN (SELECT DISTINCT pr_id
              FROM   unpvt_im_dr_e0322) LOOP
        INSERT /*+ append */ INTO unpvt_usm_dr_e0322
        SELECT pr_id,
               nr,
               col,
               Corr(n, m) val
        FROM   (SELECT a.pr_id,
                       a.nr,
                       b.nr col,
                       a.n,
                       b.val m
                FROM   unpvt_usm_drpre1_e0322 a,
                       unpvt_im_dr_e0322 b
                WHERE a.pr_id = k.pr_id
                       AND b.pr_id = k.pr_id
                       AND a.col = b.col)
        GROUP BY pr_id,
                  nr,
                  col;
        COMMIT;
    END LOOP;
    dbms_output.Put_line('POPULATED UNPVT_USM_DR_E0322');
END pro_unpvt_usm_dr;

How to increase the speed of Zoom on TIFF image

Hi everyone,
i m doing zooming operation on tiff image.
when i applied zoom in operation on image which have properties
Bit per sample =1
Image Length = 2200 Pixel
Image Width = 1700 Pixel
Resolution(x) = 200 dpi
Resolution(y) = 200 dpi
then it require 2 sec.
then i apply the same code with tiff image which have properties like,
Bit per sample =1
Image Length = 3300 Pixel
Image Width = 2500 Pixel
Resolution(x) = 300 dpi
Resolution(y) = 300 dpi
then it require 9 to 10 sec.
my code is:
RenderedImage src= oriRndImage[selectedButtonIndex];(orirndImage is Rendered
Iamge)
//Transfer Current RenderedImage object into BufferedImage object
Raster ra= currRimage.getData(); //it take time.
DataBuffer db = ra.getDataBuffer();
SampleModel sa = ra.getSampleModel();
ColorModel cm = currRimage.getColorModel();
final BufferedImage currImage = new
BufferedImage(cm,Raster.createWritableRaster(sa,db,null), false, new
Hashtable());
//Create new Bufferred Image
BufferedImage bi = new BufferedImage(zoomW,zoomH, BufferedImage.TYPE_INT_RGB);
Graphics2D g = bi.createGraphics();
double scaleW = (double)(zoomW)/(double)(prev_width);
double scaleH = (double)(zoomH)/(double)(prev_height);
transAtZoom = AffineTransform.getScaleInstance(scaleW,scaleH);
g.drawRenderedImage(src, transAtZoom);
can any one plz suggest me the way ,how to increase the speed. of Zoom effect?
how to handle this problem?
thnxs..

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to increase the font size of the report output in the printout.

Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
   exporting
     immediately                    = 'X'
     line_count                     = 65
     line_size                      = 320
     mode                           = 'CURRENT'
     no_dialog                      = ' '
     release                        = 'X'
     user                           = sy-uname
   importing
     out_parameters                 = st_param
   exceptions
     archive_info_not_found         = 1
     invalid_print_params           = 2
     invalid_archive_params         = 3
     others                         = 4.
if sy-subrc eq 0.
    new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.

hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this.

How to increase No. of attempt to Lock user account in DB

Hi,
How to increase the number of attempt [by giving wrong password] to lock the user account in DB Connection?
We have default feature as No. of attempt is 3 by giving wrong password to lock the user account.
Is it possible to increase the no. of times from 3?
Is it possible to find out who is the resource locked the account by giving wrong password?
Kindly give me input on this more.
Thanks.
Orahar.

You can increase the number of failed login attempts: the number of failed login attempts is configured in profile linked to user account http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/policies.htm#i1007339. Either you change the current profile or you can create a new one and link it to the user account.
You can retrieve profile linked to user account with:
SQL> select username, profile from dba_users where username='HR';
USERNAME PROFILE
HR DEFAULTEdited by: P. Forstmann on 12 févr. 2010 08:48

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to increase query time out

I have a report which is generated using a huge SQL, it is erroring while displaying results, due to time out error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1013, message: ORA-01013: user requested cancel of current operation at OCI call OCIStmtExecute
How to increase this time so that the connection persists for a longer duration?
thanks
Rishabh

I looked in the NQSConfig.ini file for you. In here you find the following:
[ CACHE ]
ENABLE = YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS = "/oracle/oaobi01/data/ontwbif1013/OracleBIdata/cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
I think you can do something with this...
You can find the nqsconfig.ini in this directory:<Install Drive>\OracleBI\server\Config
Otherwise have a look in the Server Administration Guide, chapter 11

How to Increase Instance size for ALBPM-Err:'Max instance size exceeded.

HI,
Can anybody in How to increase maximum instance size for
1. ALBPM Studio
2. runtime i.e. process administrator?
Look forward for help.
Cheers
The exception in detail is:
Error while persisting the transaction data: 'Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0''
Details:
Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0'
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0' at fuego.server.ProcInst.getComponentData(ProcInst.java:792) at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2777) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.executeUpdateInstance(JdbcProcessInstancePersMgr.java:2870) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.updateInstance(JdbcProcessInstancePersMgr.java:2272) at fuego.server.persistence.Persistence.updateProcessInstance(Persistence.java:1008) at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1819) at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109) at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132) at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685) at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368) at fuego.transaction.TransactionAction.commit(TransactionAction.java:302) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:63) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:264) at fuego.server.execution.ToDoItem.run(ToDoItem.java:559) at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:773) at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134) at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:446) at fuego.component.ExecutionThread.work(ExecutionThread.java:837) at fuego.component.ExecutionThread.run(ExecutionThread.java:408)

First take a look at your instance variables in your processes. Determine if some could be changed to be Separated instance variables. Once an instance variable's category changes from "Normal" to "Separated", it is not included in the instance size calculation.
If you cannot mark variables as Separated, then in Studio's "Project Navigator" tab, right mouse click the name of your project -> click "Engine Preferences" -> with the "Engine" selected as the Category, click the "Advanced" tab on the upper right change the "Maximum Instance Size" to 64KB (4x the original 15kb value) and change the "Instances Cache" to 1250 (1/4th the original value).
What version of Enterprise are you on (Standalone or WLS)? There is a similar setting on Enterprise, but it is slightly different between the two types of Enterprise Engines.
Dan

How to increase my JMSDestinationRuntimeMBeanConsumers Current ?

Similar Messages

Maybe you are looking for