How to increase number of mesages being 'Delivered' at one time

Hi All,
         I have a Proxy to JDBC scenario, where SAP sends multiple proxy messages to be sent to the Database around 38 messages, each message with 50k records.
          Now in message monitoring I observe, that at one time there are 5 messages being delivered i.e status is 'Delivering' however the rest of the messages are in status 'To Be Delivered'.
          and when one of the five messges being delivered completes, another message from 'To Be Delivered' changes to 'delivering' status.
          My Question is can we increase this parameter somewhere that 10 messages will be delivered at one time instead of 5.
Or is it dependent on the number of concurrent connection Database aloows at one time.
Regards,
XIer

hi!
check this link and you'll find the current settings.
http://<server>:<PORT>/MessagingSystem/monitor/systemStatus.jsp
cheers

Similar Messages

  • How to restrict number of podcast downloads occurs at one time?

    Is there any way I can restrict the number of Itunes podcasts are being downloaded at one time. At times when I have multiple downloads going on my internet connection is over tasked and I am unable to do anything else until downloads complete. I would like to restrict my downloads to 1 at time any help would be greatly appreciated.

    When your iTunes begins to download, switch to the Store>Downloads. At the bottom of the screen, in the grey area, is a check box marked *Allow simultaneous downloads* - this needs to be unchecked, that is - no tick in the box.
    I've never found this option on any other screen, so it has to be done while a download is under way. If several downloads are taking place when you do this, iTunes will simply keep the second and third downloads in a queue and then proceed one at a time.
    Phil.

  • How to increase number of rows display in ESS

    Hi All,
    how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
    Thanks all
    Murty

    Kalpesh,
    it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
    Thanks
    Murty

  • How to increase RAM & Hard Disk a form at run time can use?

    Question: How to increase RAM & Hard Disk a form at run time can use?
    Explanation:
    I have a problem with a form at run-time. I guess this is due to shortage of RAM/Hard Disk. I want to increase these things so that the form can use more RAM/Hard Disk and it does not crash/cancel. The reason is that when I change/toggle TOOL --> Preferences --> Runtime, Buffer Records and Array Processing parameters, the problem is rectifies intermittantly. That is there is no fix combination of above-mentioned parameters to rectify the problem. After lot of attempts, it gets resolved but only temporarily. Next time I have to modify the form, I get the same problem.
    Please help.

    I am still waiting for an answer to the above question.
    May be Oracle Corp. or anyabody, please guide.
    M. Tariq

  • How do you select an amount of songs at one time

    How do you select an amount of songs at one time because i need to change my Mp3 tags ( the bands name soo its all the same) =]Help?
      Windows XP  

    in order for this to work all the songs you want to change have to be right next to eachother in a list, one after the other.
    Select the first song you want to change. (it will be hilighted in blue)
    Hold down the shift key
    without letting up the shift key click the last song you wish to change. (any songs betwwen these to songs are now blue also)
    right click the blue patch of screen and click "get info"
    edit the feilds you wish to change, and click ok.
    superfreak9184me

  • How can you delete all the e mail at one time instead of one at a time?

    How can you delete all the e mail at one time instead of one at a time?

    you'd have to do it from the computer,

  • If I want to purchase PhotoShop CS6 for my company, how many computers can install this copyright or only one time of installation?

    If I want to purchase PhotoShop CS6 for my company, how many computers can install this copyright or only one time of installation?

    YOu can install and activate on 2 computers for non-concurrent use.
    Mylenium

  • How many character my iphone 4S can send at one time

    How many characters my iphone 4s can send at one time?

    A lot.  I'm not aware of any upper limit in an iMessage.
    For text messages, that would be a function of the carrier, I would think.
    And if you did send a message that was longer than the maximum amount ofr a single message, it would simply break up into two smaller messages.

  • How can I sync more than 100 ibooks at one time.  The new IOS killed my legal collection of 4000 books and now I cant sync.

    How can I sync more than 100 ibooks at one time.  The new IOS killed my legal collection of 4000 books and now I cant sync.
    <Edited by Host>

    How can I sync more than 100 ibooks at one time.  The new IOS killed my legal collection of 4000 books and now I cant sync.
    <Edited by Host>

  • How to Increase Number of Images from 500 in a LR3 Flash Gallery

    I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
    1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
    2.  Because I had roughly 600 images to put in the gallery, I exported the  remaining 100 as a separate flash gallery. (Going ahead and exporting 2  galleries will save you headache in a later step)
    3. I combined  all the images folders (copying "large" images from one folder to the  "large" folder in the gallery I want to upload to my site, etc.) so that  the files are all in one location.
    4. The next step is to  increase the gallery maximum in the code. Access (from the exported  gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
    5.  This next step isn't too complicated, but it is specific. You know have  to tell that flash file to look for the images you just transferred to  the images folder. The best way to do this is to open the group.xml file  for the second gallery you exported. Copy all the code beginning with <item>  to the bottom of the page. This code tells the gallery to look at your  specific images (Note: you'll notice within each item the names of your  image file)
    6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
    7. Save & check your browser!
    I hope this was clear...please comment back and I'll clarify if needed.
    ro

    500 images in a single gallery is too many - think of the poor viewer!
    But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it

  • How to increase number ptys in Solaris 10?

    Hi,
    How do I increase number of ptys in Solaris 10, also what command to view how many total currently set?
    I try to put set pt_cnt = X and rebooted, seems to be not working.
    Thanks!

    Solaris 8 and later versions should not need pt_cnt. Ptys should be dynamically allocated as needed. Can you describe the problem you are having?
    See the Solaris 2 FAQ:
    http://www.science.uva.nl/pub/solaris/solaris2.html#q5.30
    5.30) I get Could not grant slave pty on telnet/rlogin
    In Solaris 8 and later you must make sure you have syseventd/devfsadmd running or the automatic pty node creation does not work.
    In older releases this probably means that you changed "pt_cnt" but didn't reboot with the "-r" flag. To recover, run "drvconfig; devlinks".
    So, you should make sure syseventd and devfsadmd are running.
    Darren

  • How to increase number of data files parameter

    Dear All,
    I am facing problem in increasing number of data files associated with the DB. I have DB_FILES = 200 and want to set it to 300. DB was started with SPFILE.
    Tell me how to increase this parameter. I dont want to stop DB also. I will be thankful if anyone guide me in both ways to stop DB and without stopping it.
    Regards
    Aqeel Nawaz

    Madrid,
    Please don't take it as nit-picking.Just wanted to point an enhancement in 10g regarding recreating control file for increasing number of datafiles.I am sure you must be aware about it.
    Please see this link and this note,
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dfiles.htm#sthref1340
    When you issue CREATE DATABASE or CREATE CONTROLFILE statements, the MAXDATAFILES parameter specifies an initial size of the datafile portion of the control file. However, if you attempt to add a new file whose number is greater than MAXDATAFILES, but less than or equal to DB_FILES, the control file will expand automatically so that the datafiles section can accommodate more files.
    From 10g onwards,the requirement to recreate teh control file is lifted.
    Please correct me if I interpreted the note in a wrong way.
    Regards
    Aman....

  • How to Increase number of oacore jvm's in EBS 12.1

    Hi,
    Does anybody know of a document showing how we increase the number of jvm's for the oacore in EBS 12.1 ? I found some google searches detailing changing the opmn.xml file but I would like to see a document detailing which references need to changed.
    Also it is often stated that 1 jvm should configured for each cpu and best practice should be a 1 jvm should be configured for 2 cpu's. Does the type of processor effect this rule, is this as valid for a risc processor and a intel processor.
    Thanks
    Mike

    Please see these docs.
    Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12 [ID 362851.1]
    How To Prevent Inactive JDBC Connections In Oracle Applications [ID 427759.1]
    Thanks,
    Hussein

  • How to increase number of folders Apple Mail allows.

    New folders in Apple Mail are appearing at end of list, rather than alphabetically.
    Thanks for any suggestions to increase number of folders allowed.

    Deepak,
    Check out the following link http://ysislmap.googlecode.com/svn-history/r3/note/siebel/MTServer.txt ..Will help you in configuring Max tasks.
    I think you are using workflow policy programs to trigger emails using Email Manager component,if this is the case then it is not a recommended way to create another email manager component running in another siebel server,coz at same time both siebel servers will invoke the component to trigger mails ending you up in receiving two similar mails.
    -Sambit

  • Easy question - how to increase number of recent files in menu?

    This is for CS5 if it matters.
    I'm an infrequent Illustrator user (at best) but I have what I hope is an easy question: I want to increase number of recent files showing in the menu.
    I can't find a preferece to set such as in PS and almost every other application on the face of the earth. I've tried to reset the preferences file (start Illustrator with ctrl-alt-shift held down) but I'm stuck at 4 files, which I assume is the anemic default option.
    Is there an easy way to do this that Adobe has hidded somewhere? As expected, it can't be found in the help, I can't find it on the forums, or even on the net, but I do know it can be done because I can see other installs showing lots of files in the list.
    thanks for any help.

    This might be because of a new feature that you can turn off for each object, and alltogether. When you create a new document at the bottom, make sure 'Align New Objects to Pixel Grid' is unchecked.  After you have created a new file, you can still go into the 'TRANSFORM' palette (SHIFT+8), use the little right top menu, and make sure 'Align New Objects to Pixel Grid' is unchecked. And if you want to get fancy with each object; you can select an object, and look at the 'TRANSFORM' palette at the bottom is a place to uncheck the 'Align to Pixel Grid' at your disposall.
    Before I found this, it ruined my week.
    http://www.kenwells.com

Maybe you are looking for