How to increase number ptys in Solaris 10?

Hi,
How do I increase number of ptys in Solaris 10, also what command to view how many total currently set?
I try to put set pt_cnt = X and rebooted, seems to be not working.
Thanks!

Solaris 8 and later versions should not need pt_cnt. Ptys should be dynamically allocated as needed. Can you describe the problem you are having?
See the Solaris 2 FAQ:
http://www.science.uva.nl/pub/solaris/solaris2.html#q5.30
5.30) I get Could not grant slave pty on telnet/rlogin
In Solaris 8 and later you must make sure you have syseventd/devfsadmd running or the automatic pty node creation does not work.
In older releases this probably means that you changed "pt_cnt" but didn't reboot with the "-r" flag. To recover, run "drvconfig; devlinks".
So, you should make sure syseventd and devfsadmd are running.
Darren

Similar Messages

How to increase number of rows display in ESS

Hi All,
how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
Thanks all
Murty

Kalpesh,
it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
Thanks
Murty

How to Increase Number of Images from 500 in a LR3 Flash Gallery

I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
2. Because I had roughly 600 images to put in the gallery, I exported the remaining 100 as a separate flash gallery. (Going ahead and exporting 2 galleries will save you headache in a later step)
3. I combined all the images folders (copying "large" images from one folder to the "large" folder in the gallery I want to upload to my site, etc.) so that the files are all in one location.
4. The next step is to increase the gallery maximum in the code. Access (from the exported gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
5. This next step isn't too complicated, but it is specific. You know have to tell that flash file to look for the images you just transferred to the images folder. The best way to do this is to open the group.xml file for the second gallery you exported. Copy all the code beginning with <item> to the bottom of the page. This code tells the gallery to look at your specific images (Note: you'll notice within each item the names of your image file)
6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
7. Save & check your browser!
I hope this was clear...please comment back and I'll clarify if needed.
ro

500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it

How to increase number of data files parameter

Dear All,
I am facing problem in increasing number of data files associated with the DB. I have DB_FILES = 200 and want to set it to 300. DB was started with SPFILE.
Tell me how to increase this parameter. I dont want to stop DB also. I will be thankful if anyone guide me in both ways to stop DB and without stopping it.
Regards
Aqeel Nawaz

Madrid,
Please don't take it as nit-picking.Just wanted to point an enhancement in 10g regarding recreating control file for increasing number of datafiles.I am sure you must be aware about it.
Please see this link and this note,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dfiles.htm#sthref1340
When you issue CREATE DATABASE or CREATE CONTROLFILE statements, the MAXDATAFILES parameter specifies an initial size of the datafile portion of the control file. However, if you attempt to add a new file whose number is greater than MAXDATAFILES, but less than or equal to DB_FILES, the control file will expand automatically so that the datafiles section can accommodate more files.
From 10g onwards,the requirement to recreate teh control file is lifted.
Please correct me if I interpreted the note in a wrong way.
Regards
Aman....

How to Increase number of oacore jvm's in EBS 12.1

Hi,
Does anybody know of a document showing how we increase the number of jvm's for the oacore in EBS 12.1 ? I found some google searches detailing changing the opmn.xml file but I would like to see a document detailing which references need to changed.
Also it is often stated that 1 jvm should configured for each cpu and best practice should be a 1 jvm should be configured for 2 cpu's. Does the type of processor effect this rule, is this as valid for a risc processor and a intel processor.
Thanks
Mike

Please see these docs.
Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12 [ID 362851.1]
How To Prevent Inactive JDBC Connections In Oracle Applications [ID 427759.1]
Thanks,
Hussein

How to increase number of folders Apple Mail allows.

New folders in Apple Mail are appearing at end of list, rather than alphabetically.
Thanks for any suggestions to increase number of folders allowed.

Deepak,
Check out the following link http://ysislmap.googlecode.com/svn-history/r3/note/siebel/MTServer.txt ..Will help you in configuring Max tasks.
I think you are using workflow policy programs to trigger emails using Email Manager component,if this is the case then it is not a recommended way to create another email manager component running in another siebel server,coz at same time both siebel servers will invoke the component to trigger mails ending you up in receiving two similar mails.
-Sambit

Easy question - how to increase number of recent files in menu?

This is for CS5 if it matters.
I'm an infrequent Illustrator user (at best) but I have what I hope is an easy question: I want to increase number of recent files showing in the menu.
I can't find a preferece to set such as in PS and almost every other application on the face of the earth. I've tried to reset the preferences file (start Illustrator with ctrl-alt-shift held down) but I'm stuck at 4 files, which I assume is the anemic default option.
Is there an easy way to do this that Adobe has hidded somewhere? As expected, it can't be found in the help, I can't find it on the forums, or even on the net, but I do know it can be done because I can see other installs showing lots of files in the list.
thanks for any help.

This might be because of a new feature that you can turn off for each object, and alltogether. When you create a new document at the bottom, make sure 'Align New Objects to Pixel Grid' is unchecked. After you have created a new file, you can still go into the 'TRANSFORM' palette (SHIFT+8), use the little right top menu, and make sure 'Align New Objects to Pixel Grid' is unchecked. And if you want to get fancy with each object; you can select an object, and look at the 'TRANSFORM' palette at the bottom is a place to uncheck the 'Align to Pixel Grid' at your disposall.
Before I found this, it ruined my week.
http://www.kenwells.com

How to increase number of rows displayed in Essbase drill-through report?

Hi
By default, the maximum number of rows per Essbase drill-through report (via Integration Services) is set to 1000. Could anyone tell me how to change this limit please?
Regards
Chandra

Is this for an EIS drill through report that drills through to get RDBMS data, using spreadsheet add-in for example? If so check and see if "Maximum rows per query" in EIS is currently set at 1000 and try to increase it. (I don't recall hitting a 1000 limit in the past, perhaps your report is set at that? or if this is through Web Analysis maybe WA is governing it)
To set/change a query governor in EIS:
1     In the Drill-Through Reports dialog box, select a report name.
2     Click Edit to open the Report properties dialog box.
3     In the Report properties dialog box, select the Governors tab.
4     In the Maximum time per query (in seconds) text box, enter the maximum query time.
For example, to stop a query that takes longer than 100 seconds, type 100.
5     In the Maximum rows per query text box, enter the maximum number of rows to retrieve.
For example, to stop a query that retrieves more than 200 rows, type 200.
6     Click OK.

How to increase file size on solaris 10 from 2g

HI All,
how can i increase the file size on solaris 10 from 2gb .
please reply complete steps.
or any helpful tutorials
thanks

files (log files ) are being created by application and max size for the files is "2147483647" and that restriction i cant get complete logs so how can i increase the file size ?
Q) What filesystem are you using?
A) UFS
Q) What Kernel release are you using? (uname -a)
A) SunOS ss00 5.10 Generic_120012-14 i86pc i386 i86pc
Q) What system are you running Solaris on? (prtdiag -v | head)
A) System Configuration: Sun Microsystems Sun Fire V20z
BIOS Configuration: Phoenix Technologies Ltd. V1.34.4.2 08/24/2005
BMC Configuration: IPMI 1.5 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
AMD CPU0-Socket 940
AMD CPU1-Socket 940
Q) Are you running a 32-bit or 64-bit Kernel? (isainfo -v)
A) 64-bit amd64 applications
sse2 sse fxsr amd_3dnowx amd_3dnow amd_mmx mmx cmov amd_sysc cx8 tsc
fpu
32-bit i386 applications
sse2 sse fxsr amd_3dnowx amd_3dnow amd_mmx mmx cmov amd_sysc cx8 tsc
fpu
Q) How is the file being modified or created?
A) files are being created by application
Can you create a 3GB file using mkfile(1M) - # mkfile 3g 3gfile
A) 3221225472 Jun 8 05:31 3gfile yes file was created successfully

How to increase number of recent files in menu?

How do you increase the number of recent files in Open Recent menu?
Thanks

Paul Ferguson wrote:
Charles: Right now, there are as many rows as there are entries, but only three are visible so I have to scroll the list to see all twelve in my case. Would it be possible to simply grab the window and increase its size so that more rows were visible, in the same way that you can with the entire Plugin Manager window?
To automatically increase the size of the list of folders while also automatically increasing the size of the list of plug-ins is actually a fair amount of work to refactor. Our research shows that the vast majority of people just have the default two folders. However, how would you feel about 5 rows of folders as a compromise?

How to increase number of received texts in 701 / ...

My text message inbox seems to be set at a maximum limit of 50. How do I change it? There is no obvious control for this in the Messaging > Settings menus. And as usual there is nothing helpful on this issue in the 701 Help guide
Now running a 701, beautiful phone to handle and use...now that it has stopped sending my personal information to Nokia via 360Panel [rolls eyes]

Kalpesh,
it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
Thanks
Murty

How to increase disk size in solaris

Hi all
I have two disk c1t0d0s0 / c1t0d0s7
I do haven't space in disk /dev/dsk/c1t0d0s0
run df -h
/dev/dsk/*c1t0d0s0* 8,8G 7,4G 1,3G 86% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 3,4G 984K 3,4G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
8,8G 7,4G 1,3G 86% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 3,4G 72K 3,4G 1% /tmp
swap 3,4G 40K 3,4G 1% /var/run
/dev/dsk/*c1t0d0s7* 20G 21M 20G 1% /export/home
I want increasing the space in c1t0d0s0. when I installed Solaris 10 I do not looked attentively the size allocated
Thanks

Hi,
As I understand, you want to increase the size of the root partition (where you installed Solaris) which resides in c1t0d0s0. I think it can be done using Concatenations from Solaris Volume Manager (SVM).
I have tried it in non root partition like /export/home and it is very easy.
metainit -f d0 2 1 c1t0d0s7 1 c2t0d0s7 //this will create volume d0 as a concatenation
growfs -M /export/home /dev/md/rdsk/d0 //this will grow the /export/home partition
Regards,
Rei

How to increase number of mesages being 'Delivered' at one time

Hi All,
         I have a Proxy to JDBC scenario, where SAP sends multiple proxy messages to be sent to the Database around 38 messages, each message with 50k records.
          Now in message monitoring I observe, that at one time there are 5 messages being delivered i.e status is 'Delivering' however the rest of the messages are in status 'To Be Delivered'.
          and when one of the five messges being delivered completes, another message from 'To Be Delivered' changes to 'delivering' status.
          My Question is can we increase this parameter somewhere that 10 messages will be delivered at one time instead of 5.
Or is it dependent on the number of concurrent connection Database aloows at one time.
Regards,
XIer

hi!
check this link and you'll find the current settings.
http://<server>:<PORT>/MessagingSystem/monitor/systemStatus.jsp
cheers

How to increase number of touch points?

I am running FB 4.6 for iPhone with Flex SDK. I wish to track 9 touch points simultaneously. Although the SDK appears to support 11 touch points for the iPad, it appears to be limited to 5 only for the iPhone.
Apparently "In the current public version of ofxiPhone there is a hardcoded limit of maximum 5 touches (size of the tracked touch array). So for now you can change that to 10 or 15."
Am I able to change the array for iPhones in the Flex SDK to track the full 11 as in the iPad? How can I do this?
I have compiled and tested an app with both FB4.6 and Apple's xCode, but as soon as the sixth finger touches the display, all previous 5 are lost. Again, I need 9 touch points for the app.
Thanks in advance
Paul.

Deepak,
Check out the following link http://ysislmap.googlecode.com/svn-history/r3/note/siebel/MTServer.txt ..Will help you in configuring Max tasks.
I think you are using workflow policy programs to trigger emails using Email Manager component,if this is the case then it is not a recommended way to create another email manager component running in another siebel server,coz at same time both siebel servers will invoke the component to trigger mails ending you up in receiving two similar mails.
-Sambit

How to increase number of email messages displayed in my inbox

I have three 3 email acounts and one of them does not display all my recent messages.
I suspect there is a setting to display 1000 messages (or similar)
I cannot find this anywhere doing a "search"
I am using Apple Mail.
Ironically using Thunderbird I do nit have this problem.

Hi,
Unfortunately, this is a feature that Apple have taken away.
The best way to let them know you want it back is via http://www.apple.com/feedback/
Regards

How to increase number ptys in Solaris 10?

Similar Messages

Maybe you are looking for