How to increase the rows of a Table control on ITS

Hi,
I'm trying to increase the number of rows to 20 on ITS but it always shows 2 rows per navigation. Although in the backend module pool there are 8 rows and the GV_SOS_LIST_CONTROL-LINES contains the total no of rows of the internal table. yet there are always 2 rows getting printed. This screen is in different function group and being called from some other function group i.e BBP_SC_UI_ITS. Are there any parameters that we have missed out to pass from BBP_SC_UI_ITS to our function group. Reply needed urgently!!!!!!!!!!!

Hi,
i tried increasing the rows on the browser by hard coding the counter and then the rows do increase but the records that are shown are still 2 per navigation. i doubt if it is a screen size constraint. the transaction in which i'm trying all this is bbpsc01.

Similar Messages

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to increase the length of internal table dynamically

How to increase the length of internal table dynamically depending on the number of fields fetched into the internal table ?
The requirement code :
types: begin of t_data,
         form          like zscr_data_hdr-form,
         werks         like zscr_data_hdr-werks,
         matnr         like zscr_data_hdr-matnr,
         verid         like zscr_data_hdr-verid,
         lot           like zscr_data_hdr-lot,
         lot_qty       like zscr_data_hdr-lot_qty,
         udate         like zscr_data_hdr-udate,
         utime         like zscr_data_hdr-utime,
         zuser         like zscr_data_hdr-zuser,
         processed     like zscr_data_hdr-processed,
         defect        like zscr_defect_data-defect,
         vornr         like zscr_route_data-vornr,
         fld1          like zscr_defect_data-defect_val,
         fld2          like zscr_defect_data-defect_val,
         fld3          like zscr_defect_data-defect_val,
         fld4          like zscr_defect_data-defect_val,
         fld5          like zscr_defect_data-defect_val,
         fld6          like zscr_defect_data-defect_val,
         fld7          like zscr_defect_data-defect_val,
         fld8          like zscr_defect_data-defect_val,
         fld9          like zscr_defect_data-defect_val,
         fld10         like zscr_defect_data-defect_val,
         fld11         like zscr_defect_data-defect_val,
         fld12         like zscr_defect_data-defect_val,
         fld13         like zscr_defect_data-defect_val,
         fld14         like zscr_defect_data-defect_val,
         fld15         like zscr_defect_data-defect_val,
         fld16         like zscr_defect_data-defect_val,
         fld17         like zscr_defect_data-defect_val,
         fld18         like zscr_defect_data-defect_val,
         fld19         like zscr_defect_data-defect_val,
         fld20         like zscr_defect_data-defect_val,
         fld21         like zscr_defect_data-defect_val,
         fld22         like zscr_defect_data-defect_val,
         fld23         like zscr_defect_data-defect_val,
         fld24         like zscr_defect_data-defect_val,
         fld25         like zscr_defect_data-defect_val,
         fld26         like zscr_defect_data-defect_val,
         fld27         like zscr_defect_data-defect_val,
         fld28         like zscr_defect_data-defect_val,
         fld29         like zscr_defect_data-defect_val,
         fld30         like zscr_defect_data-defect_val,
         fld31         like zscr_defect_data-defect_val,
         fld32         like zscr_defect_data-defect_val,
         fld33         like zscr_defect_data-defect_val,
         fld34         like zscr_defect_data-defect_val,
         fld35         like zscr_defect_data-defect_val,
         fld36         like zscr_defect_data-defect_val,
         fld37         like zscr_defect_data-defect_val,
         fld38         like zscr_defect_data-defect_val,
         fld39         like zscr_defect_data-defect_val,
         fld40         like zscr_defect_data-defect_val,
         fld41         like zscr_defect_data-defect_val,
         fld42         like zscr_defect_data-defect_val,
         fld43         like zscr_defect_data-defect_val,
         fld44         like zscr_defect_data-defect_val,
         fld45         like zscr_defect_data-defect_val,
         fld46         like zscr_defect_data-defect_val,
         fld47         like zscr_defect_data-defect_val,
         fld48         like zscr_defect_data-defect_val,
         fld49         like zscr_defect_data-defect_val,
         fld50         like zscr_defect_data-defect_val,
         fld51         like zscr_defect_data-defect_val,
         fld52         like zscr_defect_data-defect_val,
         fld53         like zscr_defect_data-defect_val,
         fld54         like zscr_defect_data-defect_val,
         fld55         like zscr_defect_data-defect_val,
         fld56         like zscr_defect_data-defect_val,
         fld57         like zscr_defect_data-defect_val,
         fld58         like zscr_defect_data-defect_val,
         fld59         like zscr_defect_data-defect_val,
         fld60         like zscr_defect_data-defect_val,
         fld61         like zscr_defect_data-defect_val,
         fld62         like zscr_defect_data-defect_val,
         fld63         like zscr_defect_data-defect_val,
         fld64         like zscr_defect_data-defect_val,
         fld65         like zscr_defect_data-defect_val,
         fld66         like zscr_defect_data-defect_val,
         fld67         like zscr_defect_data-defect_val,
         fld68         like zscr_defect_data-defect_val,
         fld69         like zscr_defect_data-defect_val,
         fld70         like zscr_defect_data-defect_val,
         fld71         like zscr_defect_data-defect_val,
         fld72         like zscr_defect_data-defect_val,
         fld73         like zscr_defect_data-defect_val,
         fld74         like zscr_defect_data-defect_val,
         fld75         like zscr_defect_data-defect_val,
         fld76         like zscr_defect_data-defect_val,
         fld77         like zscr_defect_data-defect_val,
         fld78         like zscr_defect_data-defect_val,
         fld79         like zscr_defect_data-defect_val,
         fld80         like zscr_defect_data-defect_val,
         fld81         like zscr_defect_data-defect_val,
         fld82         like zscr_defect_data-defect_val,
         fld83         like zscr_defect_data-defect_val,
         fld84         like zscr_defect_data-defect_val,
         fld85         like zscr_defect_data-defect_val,
         fld86         like zscr_defect_data-defect_val,
         fld87         like zscr_defect_data-defect_val,
         fld88         like zscr_defect_data-defect_val,
         fld89         like zscr_defect_data-defect_val,
         fld90         like zscr_defect_data-defect_val,
         fld91         like zscr_defect_data-defect_val,
         fld92         like zscr_defect_data-defect_val,
         fld93         like zscr_defect_data-defect_val,
         fld94         like zscr_defect_data-defect_val,
         fld95         like zscr_defect_data-defect_val,
         fld96         like zscr_defect_data-defect_val,
         fld97         like zscr_defect_data-defect_val,
         fld98         like zscr_defect_data-defect_val,
         fld99         like zscr_defect_data-defect_val,
         fld100         like zscr_defect_data-defect_val,
         fld101         like zscr_defect_data-defect_val,
         fld102         like zscr_defect_data-defect_val,
         fld103         like zscr_defect_data-defect_val,
         fld104         like zscr_defect_data-defect_val,
         fld105         like zscr_defect_data-defect_val,
         fld106         like zscr_defect_data-defect_val,
         fld107         like zscr_defect_data-defect_val,
         fld108         like zscr_defect_data-defect_val,
         fld109         like zscr_defect_data-defect_val,
         fld110         like zscr_defect_data-defect_val,
         fld111         like zscr_defect_data-defect_val,
         fld112         like zscr_defect_data-defect_val,
         fld113         like zscr_defect_data-defect_val,
         fld114         like zscr_defect_data-defect_val,
         fld115         like zscr_defect_data-defect_val,
         fld116         like zscr_defect_data-defect_val,
         fld117         like zscr_defect_data-defect_val,
         fld118         like zscr_defect_data-defect_val,
         fld119         like zscr_defect_data-defect_val,
         fld120         like zscr_defect_data-defect_val,
         fld121         like zscr_defect_data-defect_val,
         fld122         like zscr_defect_data-defect_val,
         fld123         like zscr_defect_data-defect_val,
         fld124         like zscr_defect_data-defect_val,
         fld125         like zscr_defect_data-defect_val,
         fld126         like zscr_defect_data-defect_val,
         fld127         like zscr_defect_data-defect_val,
         fld128         like zscr_defect_data-defect_val,
         fld129         like zscr_defect_data-defect_val,
         fld130         like zscr_defect_data-defect_val,
         fld131         like zscr_defect_data-defect_val,
         fld132         like zscr_defect_data-defect_val,
         fld133         like zscr_defect_data-defect_val,
         fld134         like zscr_defect_data-defect_val,
         fld135         like zscr_defect_data-defect_val,
         dayst         like zscr_data_hdr-dayst,
       end of t_data.
In this fld1 to fld135 are defined in internal table.
But if the number of fields are more than 135 then the program is going to short dump.
Some times fld1 to fid170 or more fields will be there in my internal table.
Please suggest me how to make my requirement dynamic and display this data fetched into this internal table onto a .XLS file in the presentation server ?

Hi
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Max

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to Restrict the Rows In Pivot Table

Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.

Yogi1729 wrote:
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.You can't really restrict the rows in a pivot table, but you can do this:
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

How to Increase the Length of Condition table in OV20

While creating a condition table in T.code OV20 if fields length is more that 50 bytes table is not getting generated.it gives error as Too Many Fields Selected(More than 50 Bytes).
Actually i need to create a tabel with Basic Material(WRKST) which has length of 48 bytes.
Is there a solution on how to increase the length so that error is avoided.
There is no such error occuring while crating condition table in V/03

Hi,
You can try to use the type string:
form like zscr_data_hdr-form,
werks like zscr_data_hdr-werks,
matnr like zscr_data_hdr-matnr,
verid like zscr_data_hdr-verid,
lot like zscr_data_hdr-lot,
lot_qty like zscr_data_hdr-lot_qty,
udate like zscr_data_hdr-udate,
utime like zscr_data_hdr-utime,
zuser like zscr_data_hdr-zuser,
processed like zscr_data_hdr-processed,
defect like zscr_defect_data-defect,
vornr like zscr_route_data-vornr,
fieldxx type string,
dayst like zscr_data_hdr-dayst,
end of t_data.
So you can save you informations of every fld<n> concatenating their values into fieldxx.
Regards

How to merge the Rows in ALV table?

Hi All,
I want to merge the Rows in my ALV table(SALV_WD_TABLE). Is it possible?
Regards,
Yugesh A.

Yogi1729 wrote:
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.You can't really restrict the rows in a pivot table, but you can do this:
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

How to deactivate the fields in a table control of a standard screen

Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

How to display particular ROW of a table control in display/change mode

Hi,
Can we make particular ROW in a table control display mode or editable mode depending upon the conditions?.
Any inputs..
Rgds,
Lakshmiraj

Hi,
Yes it is possible. check the follwoing code for help.
*& Include           Z101954_ASSIGNMENT1I01
*&      Module VALIDATE_SALES_ORG INPUT
      text
MODULE validate_sales_org INPUT.
SELECT SINGLE zvkorg FROM vbak INTO zvbak-zvkorg
*WHERE zvbeln = zbookhdr-zvbeln.
IF sy-subrc <> 0.
   MESSAGE 'INVALID AIRLINE ID INPUT' TYPE 'I'.
   CALL SCREEN 1000.
ENDIF.
ENDMODULE.                 " VALIDATE_SALES_ORG INPUT
*&      Module USER_COMMAND_1001 INPUT
      text
MODULE user_command_1001 INPUT.
var3 = 1.
IF sy-ucomm <> 'SAVE'.
    PERFORM material_check.
    IF sy-subrc <> 0.
      MESSAGE 'ENTER THE CORRECT MATERIAL NUMBER' TYPE 'I'.
    ELSE.
      SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara
        INTO CORRESPONDING FIELDS OF it_salesitems
         WHERE zmatnr = it_salesitems-zmatnr.
      SELECT SINGLE zwerks zlgort FROM zorg
        INTO CORRESPONDING FIELDS OF it_salesitems
        WHERE zvkorg = wa_salesorder-zvkorg
         AND zvtweg = wa_salesorder-zvtweg
         AND zspart = wa_salesorder-zspart.
      it_salesitems-znetwr = it_salesitems-zstprs * it_salesitems-zbrgew.
     MODIFY it_salesitems FROM it_salesitems INDEX sy-tabix.
      MOVE-CORRESPONDING it_salesitems TO temp_salesitems.
      APPEND temp_salesitems.
      REFRESH it_salesitems.
    ENDIF.
ENDIF.
LOOP AT temp_salesitems.
if it_salesitems-pick = 'X'.
           LOOP AT SCREEN.
         IF screen-name EQ 'DETAIL'.
           screen-input = 1.
           MODIFY SCREEN.
         ENDIF.
       ENDLOOP.
       endif.
       endloop.
CASE sy-ucomm.
    WHEN 'SAVE'.
      PERFORM check_ship_to_party.
      IF sy-subrc <> 0.
        MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
      ELSE.
        PERFORM check_payer.
        IF sy-subrc <> 0.
          MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
        ELSE.
          PERFORM check_bill_to_party.
          IF sy-subrc <> 0.
            MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
          ELSE.
            wa_salesorder-zernam = sy-uname.
            MOVE-CORRESPONDING wa_salesorder TO zvbak.
            MODIFY zvbak.
            LOOP AT it_salesitems.
              it_salesitems-zvbeln = wa_salesorder-zvbeln.
              MOVE-CORRESPONDING it_salesitems TO zvbap.
              MODIFY zvbap.
            ENDLOOP.
            IF sy-subrc = 0.
              MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
              CLEAR wa_salesorder.
              REFRESH it_salesitems.
              REFRESH temp_salesitems.
              IF sy-tcode = 'ZVA01'.
                CALL SCREEN '1000'.
              ELSE.
                CALL SCREEN '1003'.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    WHEN 'DETAIL'.
      CALL SCREEN '1002'.
    WHEN 'BACK'.
      IF sy-tcode = 'ZVA03'.
        CLEAR wa_salesorder.
        CALL SCREEN '1003'.
      ELSE.
        PERFORM pop_up.
      ENDIF.
    WHEN 'EXIT'.
      IF sy-tcode = 'ZVA03'.
        LEAVE PROGRAM.
      ELSE.
        PERFORM pop_up.
      ENDIF.
    WHEN 'CANCEL'.
      IF sy-tcode = 'ZVA03'.
        CLEAR wa_salesorder.
        CALL SCREEN '1003'.
      ELSE.
        PERFORM pop_up.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_1001 INPUT
*&      Module input_help_sold_to_party INPUT
      text
MODULE input_help_sold_to_party INPUT.
SELECT zkunag FROM zvbak INTO CORRESPONDING FIELDS OF TABLE
    itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield               = 'ZKUNAG'
PVALKEY                = ' '
     dynpprog               = sy-cprog
     dynpnr                 = '1000'
     dynprofield            = 'ZKUNAG'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab              = itab
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " input_help_sold_to_party INPUT
*&      Form pop_up
      text
--> p1        text
<-- p2        text
FORM pop_up .
CALL FUNCTION 'POPUP_TO_CONFIRM'
    EXPORTING
TITLEBAR                    = ' '
DIAGNOSE_OBJECT             = ' '
      text_question               = 'DO YOU WANT TO SAVE THE ORDER?'
     text_button_1               = 'YES'(001)
     icon_button_1               = ' '
     text_button_2               = 'No'(002)
     icon_button_2               = ' '
     default_button              = '1'
     display_cancel_button       = 'X'
     userdefined_f1_help         = ' '
START_COLUMN                = 25
START_ROW                   = 6
POPUP_TYPE                  =
IV_QUICKINFO_BUTTON_1       = ' '
IV_QUICKINFO_BUTTON_2       = ' '
IMPORTING
     answer                      = ans
TABLES
PARAMETER                   =
EXCEPTIONS
TEXT_NOT_FOUND              = 1
OTHERS                      = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE ans.
    WHEN '001'.
      PERFORM check_ship_to_party.
      IF sy-subrc <> 0.
        MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
      ELSE.
        PERFORM check_payer.
        IF sy-subrc <> 0.
          MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
        ELSE.
          PERFORM check_bill_to_party.
          IF sy-subrc <> 0.
            MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
          ELSE.
            wa_salesorder-zernam = sy-uname.
            MOVE-CORRESPONDING wa_salesorder TO zvbak.
            MODIFY zvbak_101954.
            temp_salesitems-zvbeln = wa_salesorder-zvbeln.
            MOVE-CORRESPONDING temp_salesitems TO zvbap.
            MODIFY zvbap.
            IF sy-subrc = 0.
              MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
              CLEAR wa_salesorder.
              REFRESH it_salesitems.
              REFRESH temp_salesitems.
              IF sy-ucomm = 'EXIT'.
                LEAVE PROGRAM.
              ENDIF.
              IF sy-tcode = 'ZVA01'.
                CALL SCREEN '1000'.
              ELSE.
                CALL SCREEN '1003'.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    WHEN '002'.
      IF sy-tcode = 'ZVA01'.
        CLEAR wa_salesorder.
        REFRESH it_salesitems.
        REFRESH temp_salesitems.
        CALL SCREEN '1000'.
      ELSE.
        CLEAR wa_salesorder.
        REFRESH it_salesitems.
        REFRESH temp_salesitems.
        CALL SCREEN '1003'.
        CLEAR ans.
      ENDIF.
ENDCASE.
ENDFORM.                    " pop_up
*&      Module USER_COMMAND_1002 INPUT
      text
MODULE user_command_1002 INPUT.
IF sy-datar = 'X'.
   PERFORM material_check.
   IF sy-subrc <> 0.
     MESSAGE 'ENTER THE CORRECT MATERIAL' TYPE 'I'.
   ELSE.
     SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara_101954
     INTO CORRESPONDING FIELDS OF wa_salesitems
       WHERE zmatnr = wa_salesitems-zmatnr.
     wa_salesitems-znetwr = wa_salesitems-zstprs * wa_salesitems-zbrgew.
   ENDIF.
   var = 1.
ENDIF.
IF sy-ucomm = 'BACK'.
    LOOP AT temp_salesitems.
      MODIFY temp_salesitems FROM wa_salesitems .
    ENDLOOP.
    it_salesitems-pick = ' '.
    CALL SCREEN '1001'.
ENDIF.
ENDMODULE.                 " USER_COMMAND_1002 INPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE user_command_1000 INPUT.
CASE sy-ucomm.
    WHEN 'NEXT'.
      SELECT * FROM zt001k_101954 INTO CORRESPONDING FIELDS OF
        temp_salesorder WHERE
        zvkorg = wa_salesorder-zvkorg AND
        zvtweg = wa_salesorder-zvtweg AND
        zspart = wa_salesorder-zspart.
      ENDSELECT.
      IF sy-subrc = 0.
        CALL SCREEN '1001'.
      ELSE.
        MESSAGE 'Invalid Data Entered' TYPE 'I'.
        CALL SCREEN '1000'.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module USER_COMMAND_1003 INPUT
      text
MODULE user_command_1003 INPUT.
IF sy-ucomm = 'NEXT'.
   IF sy-datar = ' '.
     MESSAGE 'ENTER PURCHASE ORDER NUMBER' TYPE 'I'.
     CALL SCREEN 1000.
    IF NOT wa_salesorder-zvbeln CO '0123456789'.
      MESSAGE 'PURCHASE ORDER NUMBER IS NOT IN THE EXPECTED FORMAT' TYPE 'I'.
      CALL SCREEN '1003'.
    ENDIF.
    var3 = 0.
    CALL SCREEN '1001'.
ENDIF.
ENDMODULE.                 " USER_COMMAND_1003 INPUT
*&      Module input_help_sales_order INPUT
      text
MODULE input_help_sales_order INPUT.
SELECT zvbeln FROM zvbak_101954 INTO CORRESPONDING FIELDS OF TABLE
itab1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield               = 'ZVBELN'
PVALKEY                = ' '
     dynpprog               = sy-cprog
     dynpnr                 = '1003'
     dynprofield            = 'ZVBELN'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab              = itab1
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " input_help_sales_order INPUT
*&      Module back_command INPUT
      text
module back_command input.
*if sy-ucomm = 'SAVE' OR 'BACK' OR 'DETAIL' OR 'EXIT' OR 'CANCEL'.
*endif.
endmodule.                 " back_command INPUT
Regards
Rajesh Kumar

How to get the rows from a table having some column has any letter

Hi All,
suppose i have a table having columns id(number), code(varchar).
code has alphanumeric characters (ex. ABC123, 67B56 etc).
some codes are only numbers (2344, 7898 etc).
how can i get the rows which have alphabets in the code.
ex:
id code
1 AB45
2 456
3 890
4 67B7
how can i write a query such that it should give me the ids 1 and 4 (as they have alphabets in code)
thanks in advance to all

Thanks to one and all.
i am gettig my required output.
But i have a doubt in the operator.
If i add or remove '[]' in the operator, i am getting different ouputs.
There is a count difference in the result of the operators used.
REGEXP_LIKE(<column>,'[[:lower:]]')
REGEXP_LIKE(<column>,'[[[:lower:]]]')
REGEXP_LIKE(<column>,'[:lower:]')
Can anybody please explain what is the difference in using '[]', in the operator?
What is the correct syntax, whether i have to use two '[]'s or one '[]'.
Also, can i use REGEXP_LIKE() in oracle 8i version.( I am unable to use the operator in 8i)?
Any query to get the required output in 8i version?
Thanks in advance to all.

How to reorder the rows in a table?

Is it possible to incorporate reordering feature of the SelectOrderShuttle to a table like the following picture?
http://picasaweb.google.com/lh/photo/c-UAWCac_2ySw_VQj16GEQ?feat=directlink
Thanks.

sb92075 wrote:
The order of columns within row make NO difference to performance; with possible exception of LOB datatypeThat's not strictly true.
Given a badly designed application you may find a change in column order can make a worthwhile difference to performance. The note in question is aimed specifically at Demantra, and make the following point:
<ul>
Due to the way the Oracle RDBMS stores data physically on disk, it is possible to reduce storage and improve performance by rebuilding large tables that have many NULL-value or empty columns, to the end of the row. This is known as reordering.
</ul>
This describes a classic bad design - blaming the problems on Oracle, of course.
But if you do have very long rows (especially with more than 254 columns), and you do leave vary large numbers of columns null, then rearranging the most frequently null columns to the end of the row can make a difference. I've done it a couple of times.
The OP seems to be talking about the (generally silly) guideline to rebuild the table in primary key order, though, and there is an entertaining (but apparently broken) script that gives a meaningless number that is supposed to show how badly ordered the table is with respect to the primary key. (Personally I would just look at the clustering_factor of the primary key - it's quicker, easier, and more likely to be appropriate).
Regards
Jonathan Lewis

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

How to increase the row count for display in OBIEE Answers-Dashboard page?

Hi All,
I have problem in exporting my reports. I need to export my report to either PDF or EXCEL format. My report contains more than 1200 rows. But when i am exporting the report to PDF it contains only 500 rows, for rest of the rows i have to scroll down and again i have to export to get the contents from 501 to 1000.
Is it possible by changing any property, can i export the entire 1200+ rows in a single EXCEL or PDF? Pls anybody shed light on this issue.
Thanks in Advance
Thenmozhi.

Hi,
D:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
before take it u r back up and then update the below code ..
<Views>
<Pivot>
<MaxCells>6500000</MaxCells>
<MaxVisibleColumns>100</MaxVisibleColumns>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>
<MaxCells>6500000</MaxCells>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
</Table>
</Views>
finally re start all services then try it again... here its working fine...
Thanks
Deva

How to increase the rows of a Table control on ITS

Similar Messages

Maybe you are looking for