How to inform a field in a field screen ("Etat" en français)

Hi,
I want to inform a field according to an other field screen, in a state.
How must I make, since it is not as in a panel where this “handling” is simple #en prefixing “Pxx_” where xx are the n° of the page#.
Thank you for your assistance.
Olivier

Hi, I'm not really understanding the question...
Are you asking how to copy one item session state to another?
"Etat" en français = "State" in english according to http://babelfish.yahoo.com/translate_txt
This can be done by
:P1_ITEM1 := :P1_ITEM2
Sorry if I have misunderstood your question...
Gus..

Similar Messages

How do I delete a digital signature field?

I have Adobe Acrobat Pro 9 on Snow Leopard. I created a digital signature for a PDF file but it didn't look good, so I decided to delete it. I figured out how to delete the signature, but the signature field with the little red arrow did not delete with my signature. I want my PDF form to revert to the way it was before I created the signature. I cannot simply close the PDF without saving because I'd lose all the information I've already entered. Stupid me forgot to save before attempting the digital signature.
HOW CAN I DELETE the digital signature field? Help!

Hi SM,
The place to look for permission settings is on the Security tab of the Document Properties dialog. You can get there by selecting the File > Properties menu item and then select the Security tab.
One thing to note is if the file is Reader Enabled you will need to use the File > Save a Copy menu item to create a non-Reader enabled version of the file. You cannot edit a Reader Enabled file. As an aside, the Save a Copy menu item won't be there if the file is not Reader Enabled.
If the file was created using Designer (which is only on Windows and I know you are using a Mac) then it has to be edited in Designer.
If the file was certified, then you need to remove (clear) the certifying signature before you can edit the file, and to do that you must have access to the private key that was used as part of that signature operation.
Finally, if the file is encrypted (e.g. Password Security or Certificate Security), you can edit the file, but you have to get Acrobat to realize you are the document owner which means you need the Permissions password or or logged in using a document owners digital ID (the former is only for Password Security and the latter is only for Certificate Security).
Steve

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

How to set white spaces between the fields in dataset??

Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
                filler(40) type c,
                id(3)        type c,
                filler2(7) type c,
                delimiter type c,
             end of header.
DATA header type header.
header-filler1 = ' '.
header-id       = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
      codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
      out_char type c,
      size type i,
      insert_string type string,
      insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
    size = strlen( my_table ).
    insert_string = ''.
    DO size TIMES.
      offset = sy-index - 1.
      try.
          out_char = my_table+offset(1).
          IF out_char = SPACE.
            CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
          ELSE.
            CONCATENATE insert_string out_char INTO insert_string.
            transfer insert_string to out_file NO END OF LINE .
            insert_string = ''.
          ENDIF.
        catch CX_SY_CONVERSION_CODEPAGE.
          insert_size = strlen( insert_string ) - 1.
          insert_string = insert_string(insert_size).
      endtry.
    ENDDO.
   transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AM

problem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop.

How to reduce the width of Search field

HI All,
W e have a requirement to reduce the width of search help Screen for Bank Key in ESS Bank Information .Kindly please guide me how to change the width of the Search Screen.
Regards
Alexi

Check this [thread|restrict input field size;
Hope this helps.

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

HOW to ADD F4 help to a field on SCREEN (MODULE POOL)

Hi,
     How to add f4 help to a field in screen ..plz help
Regards,
Saleha

Hi Saleha,
                In order to add F4 help to a field in modeule pool follow these steps:-
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname     = 'BKPF'
      fieldname   = 'BUKRS'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
    FROM BKPF
    INTO CORRESPONDING FIELDS OF TABLE it_doc1
    WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'TXT_BELNR'
            value_org   = 'S'
       TABLES
            value_tab   = it_doc1.
ENDMODULE.                 " VALUE_BELNR INPUT
Hope you find this information useful, let me know.
Regards,
Aditya.

How to change a value of the field Selection Conditions in Manage- Request

Hi,
How to change manualy a value of the field Selection Conditions in Manage infocube -> Requests ?

Hi,
Here is the reason i need to do this:
The data is loaded by DTP in process chain. Overlaping requests are deleted. But, iIn some cases requests with the same selection options need not to be deleted. My idea was to change selection options in Manage(infocube) with Abap program without changing selection options in DTP filter, so that the system would not recognize requests as "overlaping requests".
So, where is the information about shown in the field Selection Options is stored? In which tables?
Thanks
Tigr_Z

How to block amount field and layout field in transaction MIR7

Hi Expert,
Please tell me how to block amount field and layout field in transaction MIR7 for a particular user .
i am trying to block through SHD0 tcode but it is not blocked.please give me the right ans
Thanks In Advance

Hi Rajuka,
I wasn't refering to SHD0 transaction variants. User exists and Customer exists are a very interesting enhancements in ABAP which helps to add custom logic to SAP delievered programs/function modules without actually modifying the original program.
Just to add a little more details to the concept of Custom Exits (Customized user exits), please refer the links below:
[http://wiki.sdn.sap.com/wiki/display/ABAP/CustomerExits(CMOD)]
[http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=189893877]
[http://wiki.sdn.sap.com/wiki/display/ERPFI/Creatinguserexitsforsubstitutions]
You will find a lot of information about custom exists and its types over the web. Also, your developer might provide you a better insight into this concept and its relevancy to your requirement.
Cheers!
Sandipan
Edited by: Sandipan Choudhury on Dec 10, 2010 8:02 AM

Coded UI: How to verify watermark displayed in the fields and Data grid?

Hi,
I've an requirement to verify watermark in the fields say username field displays "Username" water mark when no data is available in the field and water mark in data grid saying "No data available".
Please observe the water mark displayed in screenshot below:
So how to verify watermark?
Thanks & Regards,
Sunil
Best Regards, Sunil Email: [email protected]

Hello,
Depending on what form technology you are using, you can try posting to one of the following forums:
Windows Forms General
Windows Presentation Foundation (WPF)
ASP.Net forums
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to capture the user change in an input field on a selection screen?

I am coding a selection screen in which there are two input fields. The first field takes a Unix directory from the user input. Based on the input value, the second field will be populated with a the name of a file under the corresponding directory.
My question is how I can make the program capture the user input without having to make the user press ENTER after they enter the value in the first field?
Any help will be greatly appreciated.

Venkat,
Actually you led me to the real solution! It's the function module DYNP_VALUES_READ that does the trick for me. This function enables the program to capture dynamic user changes without recourse to PAI. Please refer to the code below:
REPORT   zreiabsintf MESSAGE-ID zreiabsintfmc.
*<HGDC------------------------------------------------------------------
* Selection screen for the conversion program
*HGDC>------------------------------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-001.
PARAMETERS: p_indir   LIKE epsf-epsdirnam OBLIGATORY,                   " Inbound file directory
            p_infile LIKE epsf-epsfilnam DEFAULT gc_infile OBLIGATORY, " Inbound file name
SELECTION-SCREEN END OF BLOCK input.
*<HGDC------------------------------------------------------------------
*   Displays a file-open dialog when the user clicks the search
*   help button next to the inbound file text field. The user
*   can select the inbound file visually.
*HGDC>------------------------------------------------------------------
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
* Capture any user change to the directory.
PERFORM check_dir_change.
* Display the file open dialog
PERFORM file_open_dialog CHANGING p_infile.
*<HGDC------------------------------------------------------------------
* Global constants
*HGDC>------------------------------------------------------------------
CONSTANTS:
    gc_indir LIKE epsf-epsdirnam
              VALUE '/interfaces/<SID>/inbound/',      " Default inbound directory template
    gc_infile LIKE epsf-epsfilnam VALUE 'input'.       " Default inbound file name
*<HGDC------------------------------------------------------------------
* Global data
*HGDC>------------------------------------------------------------------
DATA:
    gs_dynpfields   TYPE dynpread,                        " Fields of the current screen
     gt_dynpfields   LIKE STANDARD TABLE OF gs_dynpfields. " Table of the screen fields
*&      Form file_open_dialog
*       Opens a dialog window for the user to choose a file in
*       the specified Unix directory.
*      <--P_FILE is the file to be selected.
FORM file_open_dialog CHANGING p_file.
* Validate the directory.
OPEN DATASET p_indir FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    MESSAGE i001(zreiabsintfmc) WITH p_indir.    " Unable to open the given directory
    EXIT.
ENDIF.
CLOSE DATASET p_indir.
* Call the dialog window to open a file in the directory.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = p_indir
    IMPORTING
      serverfile       = p_file
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc NE 0.
    MESSAGE i002(zreiabsintfmc).                 " Failed to open the file.
    EXIT.
ENDIF.
ENDFORM.                    " file_open_dialog
*&      Form check_dir_change
*       text
* --> p1        text
* <-- p2        text
FORM check_dir_change .
CLEAR gs_dynpfields.
CLEAR gt_dynpfields.
gs_dynpfields-fieldname = 'P_INDIR'.
gs_dynpfields-fieldvalue = p_indir.
APPEND gs_dynpfields TO gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = gt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_dynpfields INTO gs_dynpfields INDEX 1.
p_indir = gs_dynpfields-fieldvalue.
ENDFORM.                    " check_dir_change
Thanks for all your answers! The problem is now solved.
Edited by: Ning Hu on Apr 9, 2008 11:32 AM
Edited by: Ning Hu on Apr 9, 2008 11:34 AM

How to provide hyperlink for a particular field in ALV

Hi,
How to provide hyperlink for a particular field in alv report.
Regards,
Ramu.

Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
     wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
       vbeln TYPE likp-vbeln,
      END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    is_layout               = layout
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat             = it_fieldcat
TABLES
    t_outtab                = it_likp
EXCEPTIONS
    program_error           = 1.
*&      Form user_Command
*       text
*      -->UCOMM      text
*      -->SELFIELD   text
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      SET PARAMETER ID 'VL' FIELD selfield-value.
      CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_Command

How to inform a field in a field screen ("Etat" en français)

Similar Messages

Maybe you are looking for