How to insert a new step type into a submenu?

Hi!
I'm inserting a step type into the MyTypes.ini file with c++.
With the code below I managed to put it into a menu (in the step type menu editor it is called "Group").
But I want a sub menu.
How can I put it into a sub menu (in c++)?
Who can help me? Thanks in advance!!!
Here is the code:
property->PutName("StepTypeName");
typeUseage->InsertType(property, 0, TS::TypeCategory_StepTypes);
stepObj->PutMenuGroupName("StepTypeMenuGroup");

TSNewbie,
There is no API method to edit those groups. I can only suggest to use the Step Type Menu Editor to create the group you want and make it a submenu. Then when you call stepObj->PutMenuGroupName("SubMenuGroup") the step type will be in that submenu.
I apologize if this isn't the answer you are looking for.
Ronald Byrd (NI)

Similar Messages

SWDD abends when dragging a step type into existing template

Hello,
The following steps cause an abend. Has anyone seen this and found a fix?
- Start transaction SWWD
- drag a new step type into an existing workflow template
- at the cursor a plus sign displays
- upon releasing the mouse button the program abends
I created an incident report in OSS. While awaiting their response I thought I would ask the community.
The abend listing is included in an attachment.
Thanks
Bruce

Hi Bruce
Solution: Note 1783103 - Short dump or system hanging during drag and drop in the workflow builder - Same abend message and steps. This note asks to Apply note 1769371 to solve the issue. Please note that the correction comes with SAP GUI 7.30 patch 2 ... Ronen Weisz is correct in saying that the SAP GUI is the culprit here ;-)
regards,
modak

How to create programmatically a new step type in TestStand (to myTypes.ini)

I need to create a new step type to myTypes.ini file programmatically. I have tried to do it with following steps:
- Get reference to engine
- Load type palette files
- creating new step type (engine.NewSteptype() )
- Inserting new type using TypeUsageList.InsertType method. Problem with this is the first parameter. It excpects it to be in a form of PropertyObject, but engine.NewStepType returns it as a StepType object. If I try to use StepType.AsPropertyObject it returns an error.
How to convert StepType object to a PropertyObject?

And here it is in C++:
TS::IEnginePtr mEngine;
SAFEARRAY * typeList;
TS::TypeUsageListPtr typeUseage;
TS:tepTypePtr stepObj;
mEngine = engine;
mEngine->LoadTypePaletteFiles();
typeList=mEngine->GetTypePaletteFileList();
TS:ropertyObjectFilePtr *rgelems;
SafeArrayAccessData(typeList,(void**)&rgelems);
typeUseage = rgelems[0]->TypeUsageList;
stepObj=mEngine->NewStepType();
TS:ropertyObject *property = stepObj->AsPropertyObject();
property->PutName("TestMe");
typeUseage->InsertType(property, 0, TS::TypeCategory_StepTypes);
rgelems[0]->IncChangeCount();
rgelems[0]->SaveFileIfModified(true);
SafeArrayUnaccessData(typeList);

How to put the new developed Requirement into an output type procedure...

Hi,
If we developed an new Requirement for an output type, how to put this new requirement number into the output type procedure???
for example: RV61B912
The requirement number is 912.
Thanks

any helps?
Thanks

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

How do I modify custom step type that is part of a sequence?

I have an example sequence that has a custom step type called "LabView Reentrant Action". My interest is to modify this step type to my needs. Because this custom step type is part of the sequence there is no definition in global type palette. I was told that I could copy this step into global type palette. But, I don't think I could.
I can copy the step from the sequence space but I do not have an option to paste it in the palette.
In sequence space I have options to choose LabView Reentrant Dialog Steps under Insert Step pull-down menu. When I open Step Type Menu Editor in the palette space, all types are listed except LabView Reentrant Dialog Steps. I think these are not showing in the palette because they are custom types built into the sequence.
How can I extract the custom step type into global palette so that I could modify to my needs?

Hello,
If you already have the customer step type "LabView Reentrant Action" then to modify it all you need is to go in "Type Palette" (Ctrl-T) and make modifications in the step type.
In case you are not able to see the step type in type palette then you need to add the step type in a custom ini file. You can add that ini file by clicking on customize in "Palettes" drop down menu. The you can copy paste a step in the step type and make modifications to the step.
I would recommend going through Tutorial: How Do I Make a Custom Step Type? for more reference.
I hope it helps..
Rajiv

How can i call a condition type into my ALV report

I am developing one ALV report in that how can i call a condition type.I am one condition type PB00 for special price.This special price column should be present at the output list.This special price is not there any one of the database tables.So we will create one condition type for this.How can I develop one condition type and how we may call this condition type into my ALV report.

V/06 is the condition type transaction .You attach a Access sequence to that which is stored in V/07 .
there you can also get based on key combination tables names .
which you can used in your report to include in the ALV .
Contion type PB00 Access sequence PB00
which will have step say
Step Table combination
1 071 Material plant
2 142 SO/dc/DV
here Application would A and table would A table number .
for eg .A071 .

Inserted a new hard drive into my Mac Boo Pro 2008 15 inch and don't have the original disks. Wondering if there was a way to purchase them.

Inserted a new hard drive into my Mac Boo Pro 2008 15 inch and don't have the original disks. Wondering if there was a way to purchase them from Apple or if I buy them off ebay will they work? Also its A Macbook Pro 2008 15 inch glossy with 2GB of Ram the serial number is worn off what kind OS do I need?

Wondering if there was a way to purchase them from Apple
Yes. Contact Apple Support using one of the options in the Contact Us below. You will need your MBP's serial number and payment method for a nominal fee. If the exterior serial number is illegible look elsewhere for it: MacBook Pro: How to find the serial number
or if I buy them off ebay will they work?
Probably not. Grey discs are system-specific and will work only for the exact model MBP with which they shipped. It's likely that Apple will charge you less money, and it will be guaranteed to work.

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

How to insert a new line item in VA01/VA02 by using ABAP code?

Hi Gurus
i have a very tough requirement. the customer wants to insert a free goods after an item has been populated in VA01/VA02 automatically according to some certain rules. the input material may be a main material of a sales BOM.
for example. let's suppose there is a material A who has two sub-material B and C which is maintained in a sales BOM via CS01/CS02. when the material A has been input in the line item in VA01/VA02, its quantity input and after the ENTER key has been clicked, another material D may be displayed in a new line as a gift if the condition met. the condition relates to customer/material/quanity and these information are stored in a Z-table.
on the other hand, if the material A is only a single material(not a BOM), the gift(material D) will also be filled automatically if the condition met.
i have already enhance the FM cs_bom_explosion to filfill the requirment for BOM materials. whereas it is very hard to find the enhanment point for the single material.
so my question is where is the correct place for me to insert the ABAP code, which decides whether the gift should be given or not and furthermore inserts the new line item into XVBAP. i tried to use MV45AFZZ, whereas the data is always inconsistant if a new line has been inserted. it is very strange that there is no temperary internal table storing line item data input in the table controal of VA01/VA02. system reads the line item data , line by line, via a system kernal function call.
any hints are welcome. thanks

HI Stephen,
I have the same prolem. I modified the 5 global tables, but I don't see the new line in the screen.
Can you help me with some details?
Thx!
Mihaela

How to insert a new row in the middle of an set of rows

Hi
How to insert a new row in the middle of an set of rows ? and How to Reset the line id after the new row added ?
Regards,
Sudhir B.

Hai,
just try this,
Instead of using omatrix.Addrow(1,-1) use like
omatrix.AddRow( RowCount , Position)
RowCount
The number of rows to add (default is 1)
Position
The position of the new rows (0-based; default is -1, meaning append row to the end)
After adding rows in matrix For, sno.
for i=1 to omatrix.visualrowcount
otext=omatrix.getcellspecific("columnid",i) '--where columnid is the unique id of the sno column
otext.value=i
next i
Hope this helps you.
Thanks & Regards,
Parvatha Solai.N

How to insert a new line in MC1H(maintaining formula)

How to insert a new line in MC1H(maintaining formula)
Can anybody help me with the steps

Hi,
1.run transaction SCC4 -> press Ctrl+F4 or the button for change ->double click one the row for your client -> on the field Cross Client Object Changes select Changes to the Repository and cross-client Customizing allowed -> SAVE
2. run MC1H and now you will have access to insert new line in the table
Regards Vassko!
Edited by: Vasil Pavlov on Sep 16, 2008 9:51 AM

How to create a new output type in inventory management

dear consultants .
how to create a new output type in inventory management...........?
please give me a solution
regards
ratan

Refer:
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/attaching-smartform-to-the-standard-transaction-2316027

How can I add new row/column into existing jTable?

Hi add!
Can you help me how can I add new row/column into existing jTable?
Tnx in adv!

e.g
Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
their handlers are:
add new row:
//i supose u already have
DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
//and
   JTabel jtable = new JTable(tablemodel);
// Handler (row)
jbtAddRow.addActionListener(new ActionListener(){
   public void actionPerformed(ActionEvent e) {
      if(jtable.getSelectedRow() >= 0 )
          tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());
       else
            tablemodel.addRow(new java.util.Vector());
    });to add new columns its the same but inside actionPerformed method:
ask for e.g "Whats the name for the new column"
then,
   tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
Message was edited by:
Java__Estudante

How to Insert a new line in a clob

hi,
i want to create reports as multi-line clob data using PL/SQL procedures.
is there any standard way of inserting a new line when iam generating
this clob data based on the data i fetch from a different table.
i short my question is "How to insert a new line in a clob?"
i tried using the character '\n', but that was of no use.
thanks in advance
ramesh

You could always do a:
newLine := '
Since PL/SQL allows a tring to span multiple lines.

How to insert a new step type into a submenu?

Similar Messages

Maybe you are looking for