How to insert field to database through module pool.

Hi All,
I am working on module pool,i have taken the itab with header line and structures also.
inorder to update fields to different tbales what is the logic i need to right.
i have taken move command i have written move scree-fields to structure
then have modify dbtable from structure.but no result only current record is updating
please help me.

Hi Saroja,
INSERT INTO scarr values scarr_wa
If you use above statement, it updates only one record.
INSERT INTO scarr FROM TABLE itab.
If you use above statement, it updates all records available in itab.
Choose which one u want to use and update the table.
Thanks
Venkat.O

Similar Messages

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

How to Insert Hastables Into Database Through JDBC

hi all,
I have place the Data from the Hashtables Into the Database.I can place it by Iterating through the Hastables.I would Like to Place the Entire Hashtable Itself Into the Database.
Can Any one tell me how?
bye.

Hi,
Can anyone help me out how to insert image into
database using struts...with dao n dto classes?If it matters whether or not you are using struts then you might have something wrong.
Make sure you separate the database logic out.
I know these types of questions are asked frequently, you might want to search the forum for additional examples.
Here is a good one:
http://forum.java.sun.com/thread.jspa?threadID=620455&messageID=3495899

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

How to insert data in database table

Hi experts,
How to insert data into database table using internal table from function module.

Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak.

Data insert through module pool programming

hi
I want to insert the data into the data base through module pool programming.I am taking the fields from different tables, I need sample code ,please help me

Hi Dhanunjay,
REPORT zpe_str_le .
TABLES : zpe_str , zprd_mis1 , mseg , t001l.
*DATA : STR TYPE C VALUE '50'.
data : text(100) VALUE 'DELETED STORAGE LOCATION NO '.
SELECTION-SCREEN : BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-005.
SELECT-OPTIONS : S_ZSLOC FOR ZPE_STR-ZSLOC,
S_ZMACD FOR ZPE_STR-ZMACD,
S_ZPGRP FOR ZPE_STR-ZPGRP.
SELECTION-SCREEN : END OF SCREEN 123.
DATA : flag(1) TYPE c,
flag1 TYPE c ,
flag3 TYPE c VALUE '1'.
DATA : etab LIKE t001l OCCURS 0 WITH HEADER LINE.
SELECT * FROM T001L INTO TABLE ETAB.
DATA : ihead LIKE thead.
DATA : prevtab LIKE tline OCCURS 0 WITH HEADER LINE.
data : Jtab like TLINE occurs 0 with header line.
DATA : jtab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : itab LIKE zprd_mis1 OCCURS 0 WITH HEADER LINE.
*SELECT * FROM zprd_mis1 INTO TABLE itab.
DATA : BEGIN OF itab_sloc OCCURS 0,
werks LIKE t001l-werks,
lgort LIKE t001l-lgort,
lgobe LIKE t001l-lgobe,
END OF itab_sloc.
*FLAG = 0.
CALL SCREEN 100.
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'RET'.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 100.
*PERFORM PREVIEW.
LOOP AT prevtab.
WRITE : / prevtab.
ENDLOOP.
LOOP AT JTAB[] INTO ZPRD_MIS1.
WRITE : Jtab-TDFORMAT.
WRITE : Jtab-TDLINE .
*********ZPRD_MIS1-MANDT = Jtab-TDLINE .
*********ZPRD_MIS1-SLOC = Jtab-TDLINE .
*********ZPRD_MIS1-MCODE = Jtab-TDLINE .
*********ZPRD_MIS1-GCODE = Jtab-TDLINE .
*********ZPRD_MIS1-DESCR = Jtab-TDLINE .
*********INSERT ZPRD_MIS1.
ENDLOOP.
WRITE : JTAB-ZSLOC.
*********CALL TRANSACTION 'SO10'.
SET CURSOR 2 2.
WHEN 'DET'.
SELECT * FROM ZPRD_MIS1 INTO CORRESPONDING FIELDS OF TABLE ITAB.
CALL SCREEN 123 STARTING AT 10 5.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SKIP 2 .
WRITE :/1(8) 'STR.LOC' ,10(15) 'MRP. CTLR',27(10) 'P.GRP' ,39(40) 'DESCRIPTION OF PRODUCT'.
SELECT SLOC MCODE GCODE DESCR FROM zprd_mis1 INTO ZPRD_MIS1 WHERE SLOC IN S_ZSLOC AND
MCODE IN S_ZMACD AND
GCODE IN S_ZPGRP.
WRITE :/1(8) zprd_mis1-SLOC ,10(15) zprd_mis1-MCODE ,27(10) zprd_mis1-GCODE ,39(40) zprd_mis1-DESCR .
ENDSELECT.
WHEN 'CLEAR'.
flag = 4.
IF zpe_str-zsloc NE ' '.
CLEAR zpe_str.
ELSE.
MESSAGE 'ALREADY CLEARED' TYPE 'S'.
ENDIF.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'SAVE'.
IF zpe_str-zdesc NE ' '.
IF zpe_str-zsloc NE ' '.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0 AND flag = 5.
zprd_mis1-mandt = sy-mandt.
zprd_mis1-sloc = zpe_str-zsloc .
zprd_mis1-mcode = zpe_str-zmacd .
zprd_mis1-gcode = zpe_str-zpgrp.
zprd_mis1-descr = zpe_str-zdesc .
MODIFY zprd_mis1.
flag1 = 7.
MESSAGE 'STORAGE LOCATION MODIFIED' TYPE 'S'.
EXIT.
ELSE.
zprd_mis1-mandt = sy-mandt.
zprd_mis1-sloc = zpe_str-zsloc .
zprd_mis1-mcode = zpe_str-zmacd .
zprd_mis1-gcode = zpe_str-zpgrp.
zprd_mis1-descr = zpe_str-zdesc .
INSERT zprd_mis1.
APPEND itab.
flag = 5.
flag1 = 7.
MESSAGE 'STORAGE LOCATION CREATED' TYPE 'S'.
*MESSAGE 'DATA ALREADY SAVED' TYPE 'S'.
EXIT.
*ENDIF.
ENDIF.
ENDLOOP.
ELSE.
flag = 3.
MESSAGE 'PLEASE ENTER THE STORAGE LOCATION' TYPE 'S'.
ENDIF.
ELSE.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
MESSAGE 'ALREADY SAVED' TYPE 'S'.
ELSE.
MESSAGE 'ENTRIES FOR OTHER FIELDS REQUIRED' TYPE 'S'.
ENDIF.
ENDLOOP.
ENDIF.
WHEN 'CHECK'.
SELECT * FROM zprd_mis1 INTO TABLE itab.
IF zpe_str-zsloc NE ' '.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
flag = 7.
flag1 = 7.
ELSE.
MESSAGE 'NO SUCH STORAGE LOCATION AVAILABLE' TYPE 'S'.
EXIT.
ENDIF.
ENDLOOP.
ELSE.
flag = 3.
MESSAGE 'PLEASE ENTER THE STORAGE LOCATION' TYPE 'S'.
EXIT.
ENDIF.
WHEN 'DELETE'.
IF zpe_str-zsloc EQ ' '.
flag = 3.
MESSAGE 'NOSUCH LOCATION AVAILABLE' TYPE 'S'.
ELSE.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
IF zpe_str-zsloc NE ' '.
CALL FUNCTION 'G_CHECK_PASSWORD'
EXPORTING
password = 'PLANT1'
EXCEPTIONS
not_authorized = 1
canceled = 2
OTHERS = 3.
IF sy-subrc = 0.
PERFORM PREVIEW.
DELETE FROM zprd_mis1 WHERE SLOC = zpe_str-zSLOC.
UPDATE zprd_mis1.
APPEND itab.
MESSAGE 'STORAGE LOCATION DELETED' TYPE 'S'.
ELSEIF SY-SUBRC = 2.
MESSAGE 'OPRATION CANCELLED' TYPE 'E'.
ELSEIF SY-SUBRC = 3.
MESSAGE 'UNAUTHORIZED' TYPE 'E'.
ENDIF.
ELSE.
MESSAGE 'STORAGE LOCATION CONTAINS NO DATA' TYPE 'S'.
ENDIF.
ELSE.
MESSAGE 'STORAGE LOCATION CONTAINS NO DATA' TYPE 'S'.
ENDIF.
ENDIF.
WHEN 'CREATE'.
FLAG3 = 12.
IF zpe_str-zsloc EQ ' '.
MESSAGE 'ENTER THE STORAGE LOCATION' TYPE 'S'.
EXIT.
ELSE.
LOOP AT etab.
READ TABLE etab WITH KEY lgort = zpe_str-zsloc .
IF sy-subrc = 0.
read table itab with key sloc = zpe_str-zsloc .
if sy-subrc = 0.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
flag = 7.
flag1 = 7.
clear flag .
clear flag1.
message 'storage location alredy exist' type 'S'.
ELSE.
FLAG = 2.
MESSAGE 'STORAGE LOCATION ENTIRES DOESNOT EXIST' TYPE 'S'.
ENDIF.
else.
message 'no such storage location exist' type 'S'.
endif.
endloop.
FLAG = 2.
exit.
endif.
WHEN 'CHANGE'.
SELECT * FROM zprd_mis1 INTO TABLE itab.
IF zpe_str-zsloc NE ' '.
LOOP AT itab.
READ TABLE itab WITH KEY sloc = zpe_str-zsloc .
IF sy-subrc = 0.
flag = 5.
flag1 = 6.
zpe_str-zmandt = itab-mandt.
zpe_str-zsloc = itab-sloc.
zpe_str-zmacd = itab-mcode.
zpe_str-zpgrp = itab-gcode.
zpe_str-zdesc = itab-descr.
ELSE.
MESSAGE 'NO STORAGE LOCATION AVAILABLE' TYPE 'S'.
ENDIF.
ENDLOOP.
ELSE.
flag = 3.
MESSAGE 'PLEASE ENTER THE STORAGE LOCATION' TYPE 'S'.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'AAA'.
SET TITLEBAR 'aaa'.
IF flag3 = '1'.
CALL FUNCTION 'G_CHECK_PASSWORD'
EXPORTING
password = 'PLANT1'
EXCEPTIONS
not_authorized = 1
canceled = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE 'un authorized' TYPE 'S'(001).
LEAVE TO SCREEN 0.
ELSEIF SY-SUBRC = 2.
MESSAGE ' OPERATION CANCELLED' TYPE 'S'(001).
LEAVE TO SCREEN 0.
ELSEIF SY-SUBRC = 3.
LEAVE TO SCREEN 0.
MESSAGE 'RESTRICTED' TYPE 'S'(001).
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR flag3.
ENDIF.
SELECT * FROM zprd_mis1 INTO TABLE itab.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
IF flag = 5 AND flag1 EQ 6.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
IF flag = 2.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
IF flag3 = 12.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'RET' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
EXIT.
CLEAR FLAG3.
ENDIF.
IF flag = 4.
IF screen-name CP 'ZPE_*'.
screen-input = 1.
ENDIF.
ENDIF.
IF flag1 = 7 AND flag = 5.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZSLOC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'DELETE' OR screen-name = 'CHECK' OR screen-name = 'SAVE'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF flag1 = 7 AND flag = 7.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZSLOC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'CHECK' OR screen-name = 'SAVE'." OR screen-name = 'DELETE'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF flag1 = 4 AND flag = 3.
LOOP AT SCREEN.
IF screen-name = 'ZPE_STR-ZDESC' OR screen-name = 'ZPE_STR-ZSLOC' OR screen-name = 'ZPE_STR-ZPGRP' OR screen-name = 'ZPE_STR-ZMACD'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'CREATE' OR screen-name = 'SAVE' OR screen-name = 'DELETE' OR screen-name = 'CHANGE' OR screen-name = 'CHECK'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
DATA: BEGIN OF r1 OCCURS 1.
INCLUDE STRUCTURE ddshretval.
DATA: END OF r1.
*& Module VALUE_SLOC INPUT
text
MODULE value_sloc INPUT.
SELECT lgort werks lgobe FROM t001l INTO CORRESPONDING FIELDS OF TABLE itab_sloc.
DELETE ADJACENT DUPLICATES FROM itab_sloc COMPARING lgort.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'LGORT'
value_org = 'S'
TABLES
value_tab = itab_sloc
return_tab = r1
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
IF r1-fieldval IS NOT INITIAL.
zpe_str-zsloc = r1-fieldval.
ENDIF.
ENDIF.
EXIT.
*ENDSELECT.
ENDMODULE. " VALUE_SLOC INPUT
FORM PREVIEW.
*TABLES : ZPE_STR , ZPRD_MIS1 , MSEG.
data : ihead like thead.
DATA : prevtab like TLINE occurs 0 with header line.
data : Jtab like TLINE occurs 0 with header line.
*data : Jtab like thead occurs 0 with header line.
*data : text(100).
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'ST'
LANGUAGE = sy-langu
NAME = 'ZSLDEL'
OBJECT = 'TEXT'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES = prevtab[]
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if not prevtab[] is initial.
append lines of prevtab to jtab.
endif.
*IHEAD-TDFDATE = SY-DATUM.
*IHEAD-TDFTIME = SY-UZEIT.
ihead-TDOBJECT = 'TEXT'.
ihead-TDNAME = 'ZSLDEL'.
ihead-TDID = 'ST'.
ihead-TDSPRAS = sy-langu.
type-pools : slis.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = 'SLOCATION'.
*append Jtab.
*Jtab-TDFORMAT = ''.
Jtab-TDFORMAT = '*'.
Jtab-TDLINE = ZPE_STR-ZSLOC.
append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = 'DATE'.
*append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = SY-DATUM.
*append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = 'TIME'.
*append Jtab.
Jtab-TDFORMAT = ''.
*Jtab-TDLINE = SY-UZEIT.
*Jtab-TDFORMAT = ''.
*append Jtab.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = ihead
INSERT = 'X'
SAVEMODE_DIRECT = ' '
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
TABLES
LINES = Jtab
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
OBJECT = '*'
NAME = '*'
ID = '*'
LANGUAGE = '*'
SAVEMODE_DIRECT = ' '
KEEP = ' '
LOCAL_CAT = ' '
IMPORTING
COMMIT_COUNT =
TABLES
T_OBJECT =
T_NAME =
T_ID =
T_LANGUAGE =
ENDFORM.
*&spwizard: declaration of tablecontrol 'TBLECTL' itself
controls: TBLECTL type tableview using screen 0100.
*&spwizard: lines of tablecontrol 'TBLECTL'
data: g_TBLECTL_lines like sy-loopc.
data: OK_CODE like sy-ucomm.
*&spwizard: output module for tc 'TBLECTL'. do not change this line!
*&spwizard: update lines for equivalent scrollbar
module TBLECTL_change_tc_attr output.
describe table ITAB lines TBLECTL-lines.
endmodule.
*&spwizard: output module for tc 'TBLECTL'. do not change this line!
*&spwizard: get lines of tablecontrol
module TBLECTL_get_lines output.
g_TBLECTL_lines = sy-loopc.
endmodule.
*&spwizard: input module for tc 'TBLECTL'. do not change this line!
*&spwizard: process user command
module TBLECTL_user_command input.
OK_CODE = sy-ucomm.
perform user_ok_tc using 'TBLECTL'
'ITAB'
changing OK_CODE.
sy-ucomm = OK_CODE.
endmodule.
INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME
CHANGING P_OK LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK TYPE SY-UCOMM,
L_OFFSET TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC 0.
EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations *
CASE L_OK.
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
CLEAR P_OK.
WHEN 'DELE'. "delete row
PERFORM FCODE_DELETE_ROW USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
CLEAR P_OK.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
L_OK.
CLEAR P_OK.
WHEN 'L--'. "total left
PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
WHEN 'L-'. "column left
PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
WHEN 'R+'. "column right
PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
WHEN 'R++'. "total right
PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'DMRK'. "demark all filled lines
PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'SASCEND' OR
'SDESCEND'. "sort column
PERFORM FCODE_SORT_TC USING P_TC_NAME
l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
if sy-subrc 0. " append line to table
l_selline = <tc>-lines + 1.
*&SPWIZARD: set top line *
if l_selline > <lines>.
<tc>-top_line = l_selline - <lines> + 1 .
else.
<tc>-top_line = 1.
endif.
else. " insert line into table
l_selline = <tc>-top_line + l_selline - 1.
l_lastline = <tc>-top_line + <lines> - 1.
endif.
*&SPWIZARD: set new cursor line *
l_line = l_selline - <tc>-top_line + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
IF <MARK_FIELD> = 'X'.
DELETE <TABLE> INDEX SYST-TABIX.
IF SY-SUBRC = 0.
<TC>-LINES = <TC>-LINES - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
text
-->P_TC_NAME name of tablecontrol
-->P_OK ok code
FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE TYPE I.
DATA L_TC_NAME LIKE FELD-NAME.
DATA L_TC_LINES_NAME LIKE FELD-NAME.
DATA L_TC_FIELD_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled? *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ... *
L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
ENTRY_ACT = <TC>-TOP_LINE
ENTRY_FROM = 1
ENTRY_TO = <TC>-LINES
LAST_PAGE_FULL = 'X'
LOOPS = <LINES>
OK_CODE = P_OK
OVERLAPPING = 'X'
IMPORTING
ENTRY_NEW = L_TC_NEW_TOP_LINE
EXCEPTIONS
NO_ENTRY_OR_PAGE_ACT = 01
NO_ENTRY_TO = 02
NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD L_TC_FIELD_NAME
AREA L_TC_NAME.
IF SYST-SUBRC = 0.
IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column *
SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
marks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
demarks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
Source : https://forums.sdn.sap.com/click.jspa?searchID=15092700&messageID=5654151
Have A Good Day
Chaitanya.

How to create an Oracle DATABASE through Java Programming Language.. ?

How to create an Oracle DATABASE through Java Programming Language.. ?

Oracle database administrators tend to be control freaks, especially in financial institutions where security is paramount.
In general, they will supply you with a database, but require you to supply all the DDL scripts to create tables, indexes, views etc.
So a certain amount of manual installation will always be required.
Typically you would supply the SQL scripts, and a detailled installation document too.
regards,
Owen

How to display LONG TEXT STRING in Module Pool Screen ?

Hi Experts,
I want to display long text string, on screen designed through module pool(SE51). I tried to display through input/output field , but it displays it in SINGLE LINE and i have to scroll all through to view all string.
I want to display it in rectangular format . It doesnt allow me to set HEIGHT of component.
Please provide solution.
Thanks in advance.
Regards
Deepak

This is the program where u can get the WA_THEAD from other program like report and trying to display and modifying that text. U can do instead of WA_THEAD u can generate here itself and use also
*& Module pool       ZMP_LTEXT                                         *
PROGRAM ZMP_LTEXT                               .
TABLES: STXL.
*&      Module STATUS_9000 OUTPUT
MODULE STATUS_9000 OUTPUT.
CONSTANTS:line_length type i value 132.
DATA:g_editor type ref to cl_gui_textedit,
     g_editor_container type ref to cl_gui_custom_container,
     CONT1 type scrfname value 'CONT1',
     g_repid like sy-repid,
     g_ok_code like sy-ucomm,
     g_mytable(132) type c occurs 0,
     g_mycontainer(30) type c ,
     v_result(256) type c,
     g_head like thead,
     it_line type table of tline with header line,
     wa_stxl type stxl.
DATA : BEGIN OF IT_THEAD1,
       ICON TYPE ICON-ID.
       INCLUDE STRUCTURE STXL.
DATA : END OF IT_THEAD1.
DATA : IT_THEAD LIKE TABLE OF IT_THEAD1,
       WA_THEAD LIKE LINE OF IT_THEAD.
IMPORT WA_THEAD FROM MEMORY ID 'ABCD'.
select SINGLE * from STXL into wa_stxl
                 where tdname = '00006000156500000002'.
SELECT SINGLE * from STXL into wa_stxl
                  where tdname = WA_THEAD-TDNAME
                  AND TDID = WA_THEAD-TDID
                  AND TDOBJECT = WA_THEAD-TDOBJECT
                  AND TDSPRAS = WA_THEAD-TDSPRAS.
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD EXIST' TYPE 'E'.
ENDIF.
MOVE-CORRESPONDING WA_STXL TO G_HEAD.
SET PF-STATUS 'STATUS'.
SET TITLEBAR '001'.
if g_editor is initial.
     CREATE OBJECT G_EDITOR_CONTAINER
       EXPORTING
        PARENT                      =
         CONTAINER_NAME              = CONT1
        STYLE                       =
        LIFETIME                    = lifetime_default
        REPID                       =
        DYNNR                       =
        NO_AUTODEF_PROGID_DYNNR     =
       EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
         others                      = 6.
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
     CREATE OBJECT G_EDITOR
       EXPORTING
        MAX_NUMBER_CHARS       =
        STYLE                  = 0
   WORDWRAP_MODE          = cl_gui_textedit=>wordwrap_at_fixed_position
for to fix number of characters in row to 132 characers
         WORDWRAP_POSITION      = line_length
         WORDWRAP_TO_LINEBREAK_MODE = cl_gui_textedit=>true
for the word to break to next line if it dont fit in line
        FILEDROP_MODE          = DROPFILE_EVENT_OFF
         PARENT                 = G_EDITOR_CONTAINER
        LIFETIME               =
        NAME                   =
       EXCEPTIONS
        ERROR_CNTL_CREATE      = 1
        ERROR_CNTL_INIT        = 2
        ERROR_CNTL_LINK        = 3
        ERROR_DP_CREATE        = 4
        GUI_TYPE_NOT_SUPPORTED = 5
         others                 = 6 .
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
REFRESH g_mytable.
     MOVE: WA_THEAD-TDNAME TO STXL-TDNAME,
           WA_THEAD-TDID TO STXL-TDID,
           WA_THEAD-TDOBJECT TO STXL-TDOBJECT,
           WA_THEAD-TDSPRAS TO STXL-TDSPRAS.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT                        = SY-MANDT
      ID                            = wa_stxl-tdid
      LANGUAGE                      = wa_stxl-tdspras
      NAME                          = wa_stxl-tdname
      OBJECT                        = wa_stxl-tdobject
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
IMPORTING
    HEADER                        =
    TABLES
      LINES                         = it_line
EXCEPTIONS
    ID                            = 1
    LANGUAGE                      = 2
    NAME                          = 3
    NOT_FOUND                     = 4
    OBJECT                        = 5
    REFERENCE_CHECK               = 6
    WRONG_ACCESS_TO_ARCHIVE       = 7
    OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_LINE INTO V_RESULT.
   APPEND V_RESULT TO G_MYTABLE.
ENDLOOP.
CALL METHOD G_EDITOR->SET_TEXT_AS_R3TABLE
   EXPORTING
     TABLE           = G_MYTABLE
   EXCEPTIONS
     ERROR_DP        = 1
     ERROR_DP_CREATE = 2
     others          = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   endif.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'SAVE'.
     CALL METHOD G_EDITOR->GET_TEXT_AS_R3TABLE
      EXPORTING
        ONLY_WHEN_MODIFIED     = FALSE
        IMPORTING
          TABLE                  = G_MYTABLE
        IS_MODIFIED            =
      EXCEPTIONS
        ERROR_DP               = 1
        ERROR_CNTL_CALL_METHOD = 2
        ERROR_DP_CREATE        = 3
        POTENTIAL_DATA_LOSS    = 4
        others                 = 5
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
LOOP AT G_MYTABLE INTO V_RESULT.
   APPEND V_RESULT TO IT_LINE.
ENDLOOP.
CLEAR V_RESULT.
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                = SY-MANDT
        HEADER                = G_HEAD
        INSERT                = ' '
        SAVEMODE_DIRECT       = 'X'
      OWNER_SPECIFIED       = ' '
      LOCAL_CAT             = ' '
    IMPORTING
      FUNCTION              =
      NEWHEADER             =
      TABLES
        LINES                 = IT_LINE
    EXCEPTIONS
      ID                    = 1
      LANGUAGE              = 2
      NAME                  = 3
      OBJECT                = 4
      OTHERS                = 5
   IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE TO SCREEN '0'.
*CALL SCREEN '0'.
WHEN OTHERS.
ENDCASE.
*G_OK_CODE = SY-UCOMM.
*CLEAR SY-UCOMM.
ENDMODULE.                 " USER_COMMAND_9000 INPUT

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

How can i decleare select-options in module pool table control?

Hi everybody!!
Can anyone tell me how can I decleare select-options in module pool table control screen?. I have declared it in a screen with a table control but a dump is triggered due to an error when generating the selection screen.
Regards...

My suggestion will be try to use fm
call function 'FREE_SELECTIONS_DIALOG'
Please search this forum you can find lot of threads related to this.
a®

How to draw table in layout in module pool

how to draw table in layout in module pool with wizard or table control

Hi
Goto Screen Painter .
here we can create table in 2 ways,
with wizard and without wizard.
with wizard it will step by step...
for without wizard (its quite easy)
Click Table control and Drag into ur screen.
then --> click input box and place into to that table control
for two column do this two times.
then for header click the text icon in left side and drag into
correspoding places .. then ur table is ready..
then give names using double clicking the elements
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Reward if useful.

How to populate a field from database through personalization

I need to populate value of a field from database on self service transaction web page. This field is not configured as EIT or SIT, nor available in seeded transaction.I need to know abt creating some item through personalization where i can write a query . This item will execute the query and display the returned value on the page or something on the similar line.
Thanks in advance,
Tanveer

This workaround should be used as a one time approach till you move to 11.5.10 CU3.
Here are the details,
You just need to add the following tags inside the site or function level customization document, remember it should be either site or function only no other levels are supported for adding a new item.
before adding the following tags you need to find out the following details,
1. what is the last item in the advancedTable, column or columnGroup in the base metadata. Do not conside the columns inside the columnGroups for this, just the last item which might be a column or a columngroup. Get the if of that item.
2. You should know what is the view instance and viewattribute you will be attaching
3. Remember you can only add columns through personalization and not columnGroups.
4. Replace the appropriate values for the properties amrked with {...} with your own values. You can change the other properties to reflect any specific requirement you want. Make sure you provide correct values.
<insert after="{the id you got from step 1}">
<oa:column id="{yourid}" adminCustomizable="true" bandingShade="none"
cellNoWrapFormat="false" columnDataFormat="textFormat" displayGrid="true"
rendered="true" scope="." totalValue="false" userCustomizable="false"
xmlns:oa="http://xmlns.oracle.com/oa">
<ui:columnHeader xmlns:ui="http://xmlns.oracle.com/uix/ui">
<oa:sortableHeader id="{yourid}" adminCustomizable="true"
cellNoWrapFormat="false" initSortSeq="none" prompt="{your prompt}"
rendered="true" required="no" scope="." sortState="no"
userCustomizable="false"/>
</ui:columnHeader>
<ui:contents xmlns:ui="http://xmlns.oracle.com/uix/ui">
<oa:messageStyledText id="{yourid}" adminCustomizable="true"
cellNoWrapFormat="false" dataType="VARCHAR2" initSortSeq="none" queryable="false" rendered="true" required="no" scope="."
selectiveSearchCriteria="false"
serverUnvalidated="false" sortState="no" tipType="none" totalValue="false"
userCustomizable="false" vAlign="middle" viewAttr="{your view attribute}" viewName="{your view instance name}"
warnAboutChanges="true"/>
</ui:contents>
</oa:column>
</insert>
You can insert these tags at the end of any existing tags within the <modifications>
</modifications> tag in the document.

How to inser data in database through programming

hi
if some one try to insert data directly in the data base that was displayed through programming then how can database will be updated
bye

hi
thanx 4 ur reply
but the tutorial is abt manullay changing the database through programming
but wat if user of the prgram change it and it will be change at the place of the database
bye

How to Insert Fields in ColumnSet of Change Layout Buttonof ALVgrid Output?

Hi Guys,
Can anybody tell me how to insert columns in Column Set of Change Layout Button.My Reuireemnt is i Have to display the Basic Layout and have to provide the other fields in the "Columnset" in Change Layout which will be displayed when u clcik the Change Layout button in the ALV Grid Output screen. so that user can select based on their usage.
Please Very Urgent.
Thanks,
Gopi.

You can try this ... which field you dont want to show in the fieldcatalog you can use
fieldcat-fieldname = 'F1'.
fieldcat-no_out = 'X'
( suppose F1 field you dont want to show).
But it will appear when user click on the change layout button.
regards
shiba prasad dutta

How to access screen field value in a module pool programming?

Hi Experts,
   I have create a module pool program SAPMYDLG. It contains two screens 100 and 200.
   The first screen contains Employee_ID field. This field is not a dictionary field.
   In the second screen 200, I want to access the value of Employee_ID field from first screen.
   For this I created a global variable v_empid in TOP include.
   Then in the PAI of the screen 100 I have assigned the screen field value to global variable.
   v_empid = Employee_ID.
   But this gives an error saying " Field Employee_ID not defined".
   What am I doing wrong? How can I access the screen field value?
Thanks
Gopal

Hi,
Employee_ID field also must u define in the top include when u define that 100 screen and 200 screen will access.
regards,
muralii

How to insert field to database through module pool.

Similar Messages

Maybe you are looking for