How to install AIR SDK 3.1 ( with 3.4 installed )

I am trying to install a previous version of the SDK 3.1
I am doing this to accommodate BlackBerry BB10.
Using the Manage SDK utility in Flash CS6, I currently have installed 3.2 and 3.4.
When I try to install 3.1 I first get the error that the version of the sdk I am trying to install is not valid.
Ok, I got around this by placing an airsdk.xml file in the SDK directory. Because the Archived 3.1 SDK from Adobe did not have one.. but 3.2 and 3.4 do.
Ok, not I get the error that Only SDK higher than version 3.4.2540 may be added.
So what.. now I cannot add earlier versions?
Please.. how do I add AIR SDK 3.1 as option for usage in Flash Pro CS6 ?

Hi Jason.. try the following.. but be warned. I made this up as i went along, so no promises.
I am not even entirely sure this did the trick.
That said, I have suffered no ill effect from this.
Duplicate an existing AIR xml file from that directory ( example: AdobeAIR2_5.xml ).
Name it AdobeAIR3_1.xml
Change the first lines to:
<players>
<player id="AdobeAIR3_1" version="14" asversion="3" minasversion="3">
<name>AIR 3.1</name>
<publishobject2 id="Air_Desktop_iOS" version="3.1" intversion="3.1"></publishobject2>
Then try to add 3.1 via the Manage SDK Utility.
If you cannot, remove the 3.4 folder ( rename it ).
Then restart Flash, run the utility again and it should not have 3.4 anymore.. scared yet?
Then try to add 3.1 again.
If it works.. then I am surprised two times now!
Then add 3.4 again.
I repeat - this was a hack I was desperate to try and might have gotten lucky.
There Hopefully, will be someone, one day, who will give both of us more sound advice.
I can however, now create workable BB10 and PlayBook apps from my SDK 3.1 in Flash.
I wonder if you and I are in a limited group because we happened to Not have installed 3.1 when it came out.
Leaped from 2.5 to 3.2 maybe.
Good luck!

Similar Messages

Installing and using Adobe Air SDK 2.5 with Flash Professional CS4

Hi,
I am trying to install the Air SDK 2.5 with Flash Professional CS4 with the intention of creating a program to use Actionscript 3 to communicate with the UDP interface using datagrams. (The server is the IL2 device link interface) As I am very new to this development environment I was wondering if anyone could answer a few questions.
1) Can I use datagram sockets with Air 2.5 with Actionscript 3 and Flash CS4?
2) Is there special procedure for installing the AIR SDK 2.5 or do I use the instructions layout in "How to Overlay the Adobe Air 2 SDK for Use with Flash Professional - Flash professional CS4"?
3) If I do use those instructions, when I edit the namespace for my application do I set it to 2.0 or 2.5?
4) As a stepping stone to building my program I was trying to try to build the Actionscript 3 DatagramSocketExample program that is published by Adobe. Unfortunately I am getting a '1046: Type was not found or was not a compile-time constant: DatagramSocketDataEvent'.
Is there a step by step tutorial on how to get the example code up and running?
Thankyou for your time and patience with my noob questions
Ian

This was part of the AIR 2.0 beta release note, but I used this for 2.5 and it works nice.
You can try it too an make sure you use 2.5 wherever the not says 2.0beta2.
Goodluck.
How to Update Flash CS4 to Use the AIR 2 Beta SDK
If you use Flash CS4 Professional to build Adobe AIR applications, please follow the instructions below to manually update the version of the AIR SDK to use version 2.0.
Update Flash CS4 Professional to version 10.0.2 at http://www.adobe.com/support/flash/downloads.html or select "Help > Updates... " from within Flash CS4.
Quit Flash CS4 Professional if it is open.
Navigate to the Flash CS4 installation folder. The default location on Windows is "C:\Program Files\Adobe\Adobe Flash CS4\" and on Mac OS "/Applications/Adobe Flash CS4/"
Within the "Adobe Flash CS4" folder you should see a folder called "AIK1.5". If this folder is not present repeat step #1.
Rename the folder "AIK1.5" to "AIK1.5 OLD" or delete it if you do not need to save a copy of it.
Make a new folder called "AIK1.5"
Download the Adobe AIR 2 SDK from the labs website and uncompress the contents of the folder to the new "AIK1.5" folder you just created.
Copy the "airglobal.swc" file located within the "Adobe Flash CS4/AIK1.5/frameworks/libs/air/" folder into the "Adobe Flash CS4/Common/Configuration/ActionScript 3.0/AIR1.5/" folder.
Flash CS4 is now configured to use the AIR 2 beta 2 SDK.
In order to take advantage of the new AIR 2 beta 2 features, you will need to update your application descriptor file to use the "2.0beta2" namespace.

I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.

Hi,
I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.
The "Staged" folder is present and remains after a restart, but the extensions do not get installed. They show in the extensions page with the "will be installed after you restart Firefox" message and remain like this no matter how many times I restart.
Any Idea's?
Running Firefox 24.0 on Windows 8.1
Many Thanks,
BD
P.S. Just tried to install the "troubleshooter" add-on before posting the question and I got an error saying it cannot install because it cannot modify the needed file. (I did it manually instead)

It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
If this hasn't helped then also delete the addons.sqlite file.

How to install AIR SDK 15 on my iMac

Hi everyone... I built my iOS app on Flash cs6 (with the latest AIR SDK 15) on my windows computer, but now have access to a Mac. The problem though is that the Flash cs6 on the mac is running AIR 3.2 and I have downloaded the latest AIR SDK 15 for Mac but I don't know how to install it. Can anyone help me?

I assume its the same as installing any other AIR SDK's. you go to Help >>> Managed Air SDK >>> click on the + sign on the top right >>> navigate to the AIR SDK 15 folder and then done!
I'm in the same situation as you are but I haven't received my imac YET. so I will let you know once I have done this myself or you can share your experience with us?

Cannot install AIr on HTC Desire with Froyo OS 2.2

I have an HTC Desire running Froyo 2.2 OS (OS supplied by O2 mobile company i.e. O2 branded phone)
Each time I try to install Air 2.5.1.1774 it downloads then tries to install; I get the message:-
Installation of Adobe Air unsuccessful.
Any advice please?

You need to choose "Charge Only"
Make sure you have Device Debugging enabled on your phone by going to Settings > Applications > Development > USB Debugging and ticking the checkbox.
Once your phone is properly connected and Android SDK is installed, then goto the folder where SDK is installed. You will find a folder named "tools" :
Launch cmd.exe
cd to the folder containing "adb" binary
Type "adb devices" ( This should list the device ID of your phone )
Type "adb logcat -c"
Try to download and install "Adobe AIR" from Marketplace on your phone (with USB cable connected)
On command prompt, type "adb logcat" and mail us back the output.
I found a page with detailed instruction for setting up Android SDK for HTC Desire : http://myhtcdesire.com/tutorials/how-to-install-the-adb-driver-on-windows

Installing AIR SDK on Ubuntu?

Hi everyone,
I am about to pull my hair off. I have tried to spent the complete morning to install the Adobe AIR SDK on my Ubuntu machine and it just won't work.
The runtime version is already installed and have verified it to be working with various apps.
I have Googled like never before to get a solution by myself, before asking here and have so far been able to find two tutorials (this and this) which I've followed the instructions of to end up with the same result;
Typing adl in the terminal ends up with Runtime not found being thrown.
What can I do?
Thanks!

Hi again,
I think we're getting closer!
I had to use a slightly different syntax in my Ubuntu install to avoid errors;
export PATH=$PATH:"/home/AdobeAIRSDK/bin/"
Unfortunately, the above setting gives the very same errors I mentioned earlier. (Runtime not found (No such file or directory) & Unable to access jarfile /bin/../lib/adt.jar).
Setting PATH to the what is shown below does however make ADL & ADT commands to work, but unfortunately killed pretty much every terminal command that I'd tried...
export PATH=:"/home/AdobeAIRSDK/bin/"
Any suggestion?

Installed Air SDK's disapere after re-launch

I've got an issue on my Flash Professional CC application when dealing with Air SDK's.
After I did a migration of my account into a new mac, every time I quit and relaunch my Flash Professional CC enviroment, the SDK's disapere. Or not really disapere, they are still in the menu if I go to Help>Manage SDK, but they are not present in the target drop down under publish, and I get a alert when opening projects with the "missing" SDK assigned to it.
Could it be permission issues on some settings file somewhere that Migration Assistant damaged when migrating to the new computer?
Anyone?

I knew there was a reason people called me exceptional
Regarding one practical benefit for me - saved lots space when backing up over time. And the uninstall app feature is handy.
But, as you write, YMMV.
For example, I expect you could get in trouble eliminating every file that might pop up via some of its functions.

How to embed AIR SDK?

Is it possible to have the AIR SDK embeded inside the installer for my app?
I want the process to be transparent cause the user may dislike if he have to install a requirement before installing my app.

Your end-user does not need the AIR-SDK to run your app.
They will need the AIR Runtime.
You can make the process reletively seemless using the install badge:
http://www.adobe.com/devnet/air/articles/badge_for_air.html

Z68A-GD55 G3 -- how do you get it to boot with 4 DIMMs installed?

Howdy folks,
I am really hoping that someone here can enlighten me on this magical BIOS setting that allows you to boot this unit up with all 4 DIMM slots populated? I have scoured the dark corners of the interwebz trying to figure this out and it completely eludes me, I even read the manual cover to cover... all I can find is a couple posts where people have updated the bios or went into the bios and changed a setting allowing them to escape the reboot loop that I get with all four memory slots filled.... the unit boots just fine with two DIMMs installed and it doesn't matter which two... I found this on a post but nothing else:
"One more thing, it wouldn't boot with four RAM-sticks out of the box, but it worked fine to start with only 2 RAM-sticks and use F1 to change bios-settings. After doing it that it had no problem with 4 RAM-sticks."
Take from: Google search "Z68A-GD55 megathread" since I can't post external links, the author of the article is "the Squonk"
Any one encounter this before?
Thanks in advance,
TF

That is a handy tool, thanks for pointing me to that.
Way more information but doesn't even show what you asked for?
Better printout:
Memory SPD
DIMM #            1
   SMBus address      0x50
   Memory type      DDR3
   Module format      UDIMM
   Manufacturer (ID)   Corsair (7F7F9E0000000000)
   Size         8192 MBytes
   Max bandwidth      PC3-10700 (667 MHz)
   Part number      CMX8GX3M1A1333C9
   Number of banks      8
   Nominal Voltage      1.50 Volts
   EPP         no
   XMP         no
JEDEC timings table      CL-tRCD-tRP-tRAS-tRC @ frequency
   JEDEC #1      6.0-6-6-17-22 @ 457 MHz
   JEDEC #2      7.0-7-7-20-26 @ 533 MHz
   JEDEC #3      9.0-9-9-25-33 @ 685 MHz
DIMM #            2
   SMBus address      0x51
   Memory type      DDR3
   Module format      UDIMM
   Manufacturer (ID)   Corsair (7F7F9E0000000000)
   Size         8192 MBytes
   Max bandwidth      PC3-10700 (667 MHz)
   Part number      CMX8GX3M1A1333C9
   Number of banks      8
   Nominal Voltage      1.50 Volts
   EPP         no
   XMP         no
JEDEC timings table      CL-tRCD-tRP-tRAS-tRC @ frequency
   JEDEC #1      6.0-6-6-17-22 @ 457 MHz
   JEDEC #2      7.0-7-7-20-26 @ 533 MHz
   JEDEC #3      9.0-9-9-25-33 @ 685 MHz

How to update AIR SDK for Flash Pro CC?

The most recent info I can find is for Flash Pro CS6:
http://helpx.adobe.com/x-productkb/multi/overlay-air-sdk-flash-professional1.html
Does this work in Flash Pro CC?

Thanks Colin.
I was thinking of adding a comment to my previous post along the lines of, "You would think that Adobe could make this process easy." It appears that they could, and they have.

[Win]: Can't install ExtendScript ToolKit 2 - Problems with an already installed E'Script T'Kit 2?

Hi
I have problem to install ExtendScript ToolKit 2. I had installed ExtendScript ToolKit 2 and removed it with the Uninstaller. Now I want to reinstall it but it doesn't work. The setup says there is a conflict with the already installed ExtendScript ToolKit 2, but I have removed it.
What can I do?
I have searched in the registry about keys with the ExtendScript ToolKit 2 and removed it, but no success. I have searched in the file system for ExtendScript ToolKit 2 and removed all, no success.
How can I force the installation?
Thanks
Hans

I have just had exactly the same problem and I ended up telephoning Adobe support - officially free products such as the ExtendScript Toolkit 2 do not get telephone support.
The person I spoke to at Adobe suggested I run the CS3Clean utility, and that worked for me. See http://www.adobe.com/go/kb402767
BE SURE TO READ THE INSTRUCTIONS IN FULL FIRST
In my case I only needed to run level 1 in the utility. Bit of a pain though to have to uninstall everything and re-install.

How do I sync my old library with a new install of iTunes on a seperate drive?

I just recently installed an SSD on my PC and I want to run iTunes off of the SSD. My library currently resides on my old HDD witch also has the most current version of iTunes on as well. How can I sync the library that resides on my old HDD to the new install of iTunes on my SSD?

can't if you do not have access to the old library (the usual workaround is to backup the old library and import it to the new itunes)
for important data...
sync your existing contacts with icloud, your text messages will not be disrupted, music will sync with whatever music you have on your new itunes, photos shoud still be in the camera roll (I would sync them to photostream before you sync, just in case). Any photos on your phone that are not in camera roll or photostream... if you lost those pictures with the computer crash I would take screen shots (lock button + home button at the same time) of each photo so they show up in the camera roll. App data may or may not be lost. In my experience, it depends on the app. Some of the apps recognize your apple ID and sync data over the internet with servers, some do not. I would take note of important data (such as passwords in a password keeper if you have such an app) just in case if you lose that data.

How do I make a bootable clone (with Lion already installed on my Mac)?

Hi all, I'm hoping someone can help clarify with a step-by-step on this. Here's the deal: I have a 2008 MacBook Pro, which I updated from Snow Leopard to Lion via the App Store. I have decided to upgrade my internal hard drive (which I've done before) from a 500GB to 750GB, but after doing a couple hours of research, the whole Lion element is making me nervous.
I've been reading about the whole Lion Recovery partition, which won't be brought over with a simple cloning process (via SuperDuper! or the like) and I'm now thoroughly confused with how to do this the proper way. I don't know if I need to use the Recovery Disk Assistant app on the new 750GB hard drive, or on a separate (third) drive, or to make a bootable Lion install disk on either, or even if I do do these things, how this meshes on the new drive, and do I need to format the new drive with two partitions for the Recovery partition to be a part of it?... Oy.
I'd really be appreciative if someone with the know-how of this process could help with the steps. It doesn't need to be crazy thorough--as I said, I've at least replaced my drive before--but I'm not an expert by any stretch (as a point of reference: bring up Terminal and my eyes will roll back in my head). I just need to know what to do in what order, with at least a little detail. And if it means anything to you, I'm the type of guy who likes to know WHY I'm doing something, if possible... Thanks in advance for your time and help.
(I've already got the new 750GB drive in hand, an external enclosure and a separate 8GB+ drive, too.)

You can use 3rd party software such as Carbon Copy Cloner or SuperDuper! to create a bootable clone on an external drive.
I use SuperDuper to create a clone. Yes, it's true the Recovery HD will need to be recreated after restoring a clone because neither of these softwares nor Time Machine backup that partition. It's really no big deal. You just reinstall Lion on top of itself after the restore and reapply any Software Updates including the 10.7.1 update. I've done this a few times with no issues.
The Lion Recovery Assistant app creates an external Recovery HD on like a USB thumb drive, but it creates this using the Recovery HD from your Lion install. If the Recovery HD is missing, the app will not create one for you.
EDITED:
Create your bootable clone on an external drive.
Create an external USB thumb drive with the Recovery HD using the Lion Recovery Assistant.
Swap out hard drives.
Boot from the USB Recovery HD thumb drive.
Use Disk Utilities to create a new partition (Macintosh HD), format it with the GUID partition table and Mac OS Extended (Journaled).
While in Disk Utilities, click your hard drive (not the new partition); then click the Restore button.
The Source of your restore is the external clone you created. The Destination is the newly created Macintosh HD partition.
Click the Restore button. The restore will take awhile depending on the size of the clone.
After the restore, boot your system and it should boot into Lion.
Reinstall Lion on top of itself to recreate the Recovery HD at the end of your Lion partition.
Reapply Software Updates including the 10.7.1 update (if you want it).
Hope this helps!

How effective is air server for pc with apple tv?

I am considering downloading air server for my PC to use with apple tv. Why should I do it and why shouldn't I do it?

AirParrot is an option.

How to start an OO4O application only with XE client installed ?

Hi,
I have an Oracle OLE application that works find with the normal 10g client.
But I can't start the application on a system with only the XE client installed.
There are no oip10.dll, oip10.tlb, oraansi10.dll and oraclm32.dll.
After copying them from the normal 10g Client bin directory to the xe client bin. The registration of the oip10.dll failed.
Is there any way to get a normal application which uses the "Oracle object for OLE class" to work?
Thanks
Message was edited by:
user525619

1. what is the resources of the machine you are using?
2. What is the error message you are getting?
Cheers

How to install AIR SDK 3.1 ( with 3.4 installed )

Similar Messages

Maybe you are looking for