How to install Oracle Applications on Fedora Core 6?

I am trying to install Oracle Applications on Fedora Core 6. But when i start rapidinstall it is showing the error as permission denied eventhough all permissions are correct. I tried this with singleuser and multiuser also.
Is it possible to install Oracle Applications on Fedora Core 6?

It is probably best to stick with Red Hat AS/ES 3.0/4.0, Oracle Linux 4.0, or SLES9/Suse9/10 for installing Oracle Applications. Even if you could install it on FC 6, it is likely it would break, and be very difficult to get it working again.
Here are the RH 4 prerequisites:
Red Hat Enterprise Linux AS/ES 4.0* Legacy Software Development package and X Software Development package
Note: Select these packages from the Package Group Selection screen. If the operating system is already installed, use System Settings > Add/Remove Applications to install these two packages.
The following components will be installed automatically:
compat-db-4.1.25-9
compat-gcc-32-3.2.3-47.3
compat-gcc-32-c++-3.2.3-47.3
compat-oracle-rhel4-1.0-5
compat-libcwait-2.0-2
compat-libgcc-296-2.96-132.7.2
compat-libstdc++-296-2.96-132.7.2
compat-libstdc++-33-3.2.3-47.3
xorg-x11-deprecated-libs-devel-6.8.1-23.EL
xorg-x11-deprecated-libs-6.8.1-23.EL
The following required component must be installed manually:
openmotif-2.1.30-x
Note: For information on downloading the openmotif component, see the instructions at the following URL: https://rhn.redhat.com/errata/RHSA-2 005-412.html

Similar Messages

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Installing Oracle Linux on Fedora Core (formerly Red Hat)

Hello,
I am very new to Linux having been a recent Windows convert and wanted to find out whether I can talk to someone about installing Oracle on a Fedora Core system. I find the current documentation to be quite daunting for a newbie like me. I am not new to Oracle per se but I am new to installing it on a different operating system. It's also easier for me to chat about my issues than to do a long-winded e-mail. If there is a "guru" in this area that can contact me, I can be reached at 305-491-0417 (cell) or e-mail me at [email protected]
Much appreciated and Thanks,
Steve

Hello
Here is a very good guide:
http://www.puschitz.com/OracleOnLinux.shtml
lajos

JRE not found, while installing Oracle 9i on Fedora Core 5

I am installing Oracle 9i on Fedora Core 5 from the following site.
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
The site asks me to Download the Java Runtime Enviroment (j2re-1_3_1_15-linux-i586.bin) from the Sun website.
extract the file and put it in /opt directory. And edit Disk1/install/linux/oraparam.ini and modify JRE_LOCATION variable to /opt/jre1.3.xx
I have downloaded JRE version jre1.3.1_19 as this is the version available from the sun site, and put it in the /opt directory.
[oracle@localhost Disk1]$ cd /opt
[oracle@localhost opt]$ ls -l
total 24
drwxr-xr-x 6 root root 4096 Aug 19 2006 jre1.3.1_19
My oraparam.ini settings are:
[oracle@localhost ~]$ cat Disk1/install/linux/oraparam.ini
[Oracle]
JRE_LOCATION=/opt/jre1.3.1_19
However, after doing these changes when I use /home/oracle/Disk1/runInstaller, i get the following error:
[oracle@localhost Disk1]$ pwd
/home/oracle/Disk1
[oracle@localhost Disk1]$ ./runInstaller
[oracle@localhost Disk1]$ The Java RunTime Environment was not found at /tmp/OraInstall2008-04-29_07-09-15AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory

Ivan Kartik:
I have installed Oracle 9i on Fedora 5.
I am able to login using sqlplus 'sys/sys as sysdba'
and start the database using startup
However, there were problems starting Configuration Assistant services and HTTP Server.
Here are the details:
Launched configuration tool Agent Configuration Assistant
Command which is being spawned is /opt/oracle/920/JRE/bin/jre -classpath /opt/oracle/920/JRE/lib/rt.jar:/opt/oracle/920/jlib/srvm.jar:/opt/oracle/920/network/agent/agentca.jar oracle.agent.AgentCA /orahome /opt/oracle/920 /nodeinfo NO_VALUE
Configuration tool Agent Configuration Assistant failed
Parameter "orahome" = /opt/oracle/920
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Result code for launching of configuration tool is 1
Launched configuration tool Starting HTTP Server
Command which is being spawned is /opt/oracle/920/Apache/Apache/bin/apachectl startssl
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Starting HTTP Server failed
/opt/oracle/920/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
/opt/oracle/920/Apache/Apache/bin/apachectl startssl: httpd could not be started
Result code for launching of configuration tool is 1
Launched configuration tool Agent Configuration Assistant
Command which is being spawned is /opt/oracle/920/JRE/bin/jre -classpath /opt/oracle/920/JRE/lib/rt.jar:/opt/oracle/920/jlib/srvm.jar:/opt/oracle/920/network/agent/agentca.jar oracle.agent.AgentCA /orahome /opt/oracle/920 /nodeinfo NO_VALUE
Configuration tool Agent Configuration Assistant failed
Parameter "orahome" = /opt/oracle/920
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed

How to install oracle 9i in fedora core6

Hi.
Currently I trying to install installed Oracle 9i database on fedora core 6...
I am fecing some problem during this installation......
please give me step by step procedure for oracle 9i installation in fedora core 6...
I tried to install oracle10g in fedora core 6, its working fine but Currerntly I want to work in oracle 9i......
please guide me..
thanks in advance..
[email protected]

Duplicate Thread:
Hpw to install oracle 9i in fedora core 6
More detail over there.
~Jer

How to install Oracle Application Testing Suite on ubuntu 12.4 64 bits?

Hi Guys,
I am trying to install Oracle Application Testing Suite on ubuntu 12.4 64 bits, I have downloaded the application (Oracle Application Testing Suite 12.1.0.1.0 - Complete Install ) from http://www.oracle.com/technetwork/oem/app-test/index-084446.html, unzipped the zip file and then did sh setup.sh and I got this error:
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-07-10_11-42-14AM/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-07-10_11-42-14AM/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1703)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1003)
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     at java.lang.System.loadLibrary(System.java:1028)
     at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     at oracle.bali.ewt.olaf.OracleLookAndFeel.<clinit>(Unknown Source)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager._useOracleLookAndFeel(OiifmGraphicInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:263)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:209)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:243)
     at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:466)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:965)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
Exception in thread "main" java.lang.NoClassDefFoundError: Could not initialize class oracle.bali.ewt.olaf.OracleLookAndFeel
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager._useOracleLookAndFeel(OiifmGraphicInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:263)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:209)
     at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:243)
     at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:1023)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
I have downloaded 64 bits for Linux but it comes with jre/lib/i386 which to my understanding it is 32 bits jre.
any help please on how to install this application on ubuntu 12.4 64 bits.
Many thanks in advance.
Regards,

Hi
OATS is not supported on Ubuntu only on OEL 5.2 and 4u8 both 64 bit
Thanks and Regards
Alex

How to Install SJAS on a Fedora Core 4 box

I've had my share of headaches making SJAS work well on an FC4 box, and as there was no good "how-to" on the install, I've compiled the following from trial and error. Hope this is of some use:
Installing Sun Java App Server on FC4:
1) First, start with a Fedora Core 4 box, running with at least 1GB of RAM. This is the minimum recommended configuration for Sun Java Application server, and its associated programs. Load balancing uses a lot more resources (minimum recommended config is 2GB RAM) but on a stand-alone box, 1GB will do. Ensure you've got disk space and connectivity to the net, especially DNS.
2) Copy over the following files to the box. You'll need all of these for the install:
o compat-libstdc++-296-2.96-132.fc4.i386.rpm - compatibility library needed for FC4, or else the install will crash but won't tell you about it.
o compat-libstdc++-33-3.2.3-47.fc4.i386.rpm - another compatibility library needed
o jdk-1_5_0_02-linux-i586.rpm - the JDK as the Java Application server needs Java to run.
o java_es_05Q4_msgserver-ga-linux-x86.zip � appx 340MB, and is the download which installs SJAS, the web server with load balancer plugin, the directory server, etc.
3) Do an rpm -iv on the compat-libstdc* compat libraries.
4) Do an rpm -iv on the jdk.
5) Link the java executibles to /usr/bin by typing "ln -sf /usr/java/jdk1.5.0_02/bin/* /usr/java". If you installed a different version of the JDK, put in that version instead of 1.5.0.02.
6) Edit your /etc/hosts file. By default, the FC4 install maps your hostname of your box onto localhost / 127.0.0.1. Take this hostname off of 127.0.0.1 so that the only name mapped to 127.0.0.1 is localhost. Then, on the IP address you plan on installing SJAS onto, map the hostname and the fully-qualified domain name to that address. An example /etc/hosts/ file that has worked is:
127.0.0.1 localhost.localdomain localhost
192.168.99.203 iloapp01.scientology.net iloapp01
7) Unzip the java_es_05Q4_msgserver-ga-linux-x86.zip file into a directory using the "unzip" command.
8) Go into the java_es_05Q4/Linux_x86 directory just created, and run ./installer
9) This will then pop up a graphical installer, if you are running this directly on the server. If running via a console, type ./installer -nodisplay which will pop up the installer in text mode.
10) Click through the installer until you get to the packages list. Install all of the packages, unless there is a specific reason � for the server you're working with � that you don't want one or another of the packages.
11) When it asks you if you want to configure now or configure later, click configure now.
12) Page through all of the proceeding pages of questions, entering master passwords when it asks you to. If it hangs on the first screen, asking for a valid IP address and/or hostname, you either (a) didn't specifiy a valid address which is configured on that box, or (b) you messed up on the /etc/hosts file config above. All you want in the "hostname" field is the server name (i.e. "iloapp01") and all you want in the domain name field is the base domain (i.e. "scientology.net"). That will work.
13) Finish the install wizard and let it exit gracefully.
14) After it finishes the install, you should be able to start each of the services on the box without issue.
o You need the Sun Directory Server for authentication. To start the directory server, run /opt/sun/sbin/directoryserver start, which should work without a hitch. Check if it's working and on by doing a ps -ef | grep slapd and see if the slapd process is running (the LDAP server, needed for authentication).
o Test-start the admin console by running /opt/sun/sbin/mpsadmserver start. This should hang for a little while (unless you have a preposterously fast machine) and then report that it's started. If it didn't work, it will tell you "it hasn't been configured" or some such.
o Start the app server by going to /opt/sun/appserver/bin and typing asadmin start-appserv --user admin. You should then be able to start the admin server after typing the master password.
If this all works, you have a Sun Java Application Server installed, as well as the Directory Server to support it and allow for authentication. For more details on what do do from here, see the Getting SJAS Enterprise Edition to work on an Application Server page.
Tad
Church of Scientology
http://www.scientology-washingtondc.org

Hi !
What do you mean with "crash"?[oracle@katon3 oracle]$ oemapp console
start the console,
select database, enter the usernam and password and after
SIGSEGV 11* segmentation violation
stackbase=49875E68, stackpointer=49874AC4
Full thread dump:
"Image Fetcher 1" (TID:0x42192a58, sys_thread_t:0x8b54dd0, state:CW, thread_t: t@393226, sp:0x0 threadID:0x1511, stack_base:0x48cdee68, stack_size:0x200000) prio=1233603152
java.lang.Object@1109071112/1111761664: owner "VtaEmTreeSQLParentNode-Expand-Thread" (0x8cd8100, 1 entry)
oracle.ewt.timer.Periodic@1108949792/1112058504: <unowned>
Waiting to be notified:
"CursorIdler" (0x8c18a48)
Registered Monitor Dump:
Thread queue lock: <unowned>
Waiting to be notified:
"main" (0x831bfc8)
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Waiting to be notified:
"Finalizer thread" (0x831d8a8)
Monitor registry: owner "Thread-4" (0x8d38558, 1 entry)
[oracle@katon3 oracle]$
Is there an X serevr running?Yes.
Does oem console java use the correct jre i.e. from $ORACLE_BASE/jre/1.1.8/...?I did not change the jre.
Regards,
Johnny

Prob Installing oracle 10g on fedora core-1

i'm getting this error message while installing :
[root@localhost cdrom]# ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat -3
Failed <<<<
I have installed the following pakcages:
make-3.79
binutils-2.11
openmotif-2.2.2-16
setarch-1.3-1
compat-db-4.0.14.5
compat-gcc-7.3-2.96.122
compat-gcc-c++-7.3-2.96.122
compat-libstdc++-7.3-2.96.122
compat-libstdc++-devel-7.3-2.96.122
WHAY I'M GETING THIS ERROR MSG AND HOW CAN I OVER COME IT

hi tomva,
at /etc/redhat-release this thing is written , think it's ok,
Fedora Core release 1 (Yarrow)
i've tried ./runInstaller -ignoreSysPrereq but showing the msg
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Ignoring required pre-requisite failures. Continuing...Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will m ake it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
SHOULD I RUN THE INSTALLATION BY COPYING THE CDROM CONTENTS TO A DIRECTORY AND RUN FROM THAT DIRECTORY?

How to install oracle 11g on fedora 13 or RHLE

hello,
am a beginner on linux and start study oracle developer self study
and i need some one explain hot to install oracle on fedora or rhle or centos
i give up using microshit sorry microsoft
so any one help me plz

Oracle RDBMS is not a click and play installation no matter which computer platform. To save you some time and frustrations later, what is your computer hardware? Oracle will be the supported and easiest to install on Enterprise Linux distributions, which is usually problematic with laptop or desktop computers and Linux beginners. In the later case, you may want to consider running Linux and Oracle using hardware virtualization such as Virtualbox, provided you have sufficient RAM and CPU; this would also allow you to evaluate Linux while using Windows as your host operating system for your day to day work or until you are comfortable with Linux.

How to install oracle 9i on Fedroa Core 5

Could anyone tell me as title.
Thank very much

Hi,
1. set the kernel configuration for semaphores by editing /etc/sysctl.conf
kernel.shmmax = 2147483648
kernel.shmmni = 128
kernel.shmall = 2097152
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
2. Install the packaged JDK
# Make the bin file executable
chmod u+x j2sdk-1_3_1_09-linux-i586.rpm.bin
# Run the bin file. Agree to the terms and conditions.
./j2sdk-1_3_1_09-linux-i586.rpm.bin
# Install the RPM file.
rpm -ivh jdk-1.3.1_09.i586.rpm
3. create group and user
groupadd oinstall
groupadd dba
groupadd oper
groupadd apache
useradd -g oinstall -G dba oracle
passwd oracle
useradd -g oinstall -G apache apache
passwd apache
4. create directories
mkdir -p /u01/app/oracle/product/9.2.0.1.0
chown -R oracle.oinstall /u01
5.Login as oracle and edit your .bash_profile as follows
# Oracle 9i
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/9.2.0.1.0; export ORACLE_HOME
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=$ORACLE_HOME/bin:$PATH:/usr/java/jdk1.3.1_09/bin; export PATH
ORACLE_OWNER=oracle; export ORACLE_OWNER
ORACLE_SID=TSH1; export ORACLE_SID
LD_LIBRARY_PATH=$ORACLE_HOME/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
ORACLE_OEM_JAVARUNTIME=/usr/java/jdk1.3.1_09; export ORACLE_OEM_JAVARUNTIME
LD_ASSUME_KERNEL=2.4.1; export LD_ASSUME_KERNEL
THREADS_FLAG=native; export THREADS_FLAG
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
6. Make sure you have installed the following packages
rpm -Uvh libpng10-1.0.13-9.i386.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-35.i386.rpm
rpm -Uvh compat-libstdc++-7.3-2.96.118.i386.rpm
rpm -Uvh compat-libstdc++-devel-7.3-2.96.118.i386.rpm
rpm -Uvh compat-db-4.0.14-2.i386.rpm
rpm -Uvh compat-gcc-7.3-2.96.118.i386.rpm
rpm -Uvh compat-gcc-c++-7.3-2.96.118.i386.rpm
rpm -Uvh sysstat-4.0.7-5.i386.rpm
rpm -Uvh openmotif21-2.1.30-8.i386.rpm
rpm -Uvh pdksh-5.2.14-23.i386.rpm
Oracle need GNU C-Compiler 2.95 by default
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln -s /usr/bin/gcc296 /usr/bin/gcc
ln -s /usr/bin/g++296 /usr/bin/g++
Ok, for now.
Now edit Disk1/oraparam.ini and set the correct JRE_LOCATION and start by ./runInstaller in Disk1
You will get two errors. The first one can be ignored. We will fix it later.
When the scond one occurs open another terminal and edit $ORACLE_HOME/ctx/lib/env_ctx.mk with any texteditor. Add a "$(LDLIBFLAG)dl" flag into the line starting with "INSO_LINK =" and click retry.
After install open a term and execute the following commands to fix the first error:
cd $ORACLE_HOME/network/lib
make -f ins_net_client.mk install
Then edit the $ORACLE_HOME/ctx/lib/ins_ctx.mk file so that lines 13-14 change from:
ctxhx: $(CTXHXOBJ)
$(LINK) $(CTXHXOBJ) $(INSO_LINK)
to:
ctxhx: $(CTXHXOBJ)
$(LINK) -ldl $(CTXHXOBJ) $(INSO_LINK)
After that execute the following command:
make -f $ORACLE_HOME/ctx/lib/ins_ctx.mk install
The agent can now be started using:
$ORACLE_HOME/bin/agentctl start
Before a database instance can be created some of the Oracle tools must be forced to look at an alternative JRE:
mv $ORACLE_HOME/JRE $ORACLE_HOME/JRE_ORIG
ln -s /usr/java/jdk1.3.1_09/jre $ORACLE_HOME/JRE
su - root
ln -s /usr/java/jdk1.3.1_09/jre/bin/java /usr/java/jdk1.3.1_09/jre/bin/jre
ln -s /usr/java/jdk1.3.1_09/jre/bin/i386/native_threads/java /usr/java/jdk1.3.1_09/jre/bin/i386/native_threads/jre
exit
With this done the DBCA can be started using dbca from the command line.
This long procedure worked for me. In our days I run ORACLE on UBUNTU with fewer problems while installing. If you have further questions I will try to push you.
Bye Holger

How to install Oracle Content Database Archive Adapter for SAP on windows

Hi,
I would like to install CDAA(Oracle Content Database Archive Adapter) on 32 bit and 64 bit windows. Will somebody point me to where i can download this from (if its not free i would like to try out trial version first) . If it depends upon other oracle components what is that i need to install additionally . And if you could provide links to all the required components, it would be great help.
Also if there is any demo from where i can see what all features CDAA support and how does it compare to other products say IBM commonstore etc , please let me know.
Thanks a lot ..
-Rohit

Can any body help me to say thet "How to install Oracle Applications 11i(11.5.10.2) on Windows 2003 R2 X64 bit ' . Hi,
I believe, 11i installation on Windows 2003 X64 is not fully supported.
what is your os version:
if it is windows 2003 32 bit, then it is supported on X86-64 servers for both database and application tiers
If it is windows 2003 64 bit, then only datatabase tier is supported on x86-64 servers
Have a look at the following note
Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 Doc ID: 343917.1
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=343917.1

Oracle database for Fedora Core 7 (x86_64)

I want to install Oracle database on Fedora core 7(x86_64). I tried with 10201_database_linux_x86_64.cpio.gz setup but it does not support Fedora core 7 platform. Please suggest me where to find the proper setup.
Thanks in advance

This trick, from a previous thread worked for me for Redhat 5. You might wanna use it for Fedora;
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini
Add the name of your distribution on this line. It might work for you
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2, Fedora Core 7

Installing Oracle Application Server 10.2 for Oracle Database Lite

Can anybody please tell me how to install oracle application server 10.2 for oracle database lite (i use oracle database lite for my final project). I use wi-fi connection to synchronize between pda and my laptop as server. Should i install oracle internet directory before installing oracle application server? I have difficulties in installing application server, what are the options should i take in every page of installation? Thanks before.

Install with the base, do not select any other options. Only choose webcache if you require the use of a software load balancer.

Installing Oracle Application 11i

Urgent, I need information on How to install oracle application 11i : Sizing, architecture, documentation.
All documentation will be useful.
Thanks to all,

Urgent, I need information on How to install oracle application 11i : Sizing, architecture, documentation.
All documentation will be useful.
Thanks to all,

Install Oracle Application Server on same as database server

How to Install Oracle Application Server.
Can I install on the same server as database server
Can some body provide a simple tutorial for Windows Installation.
Ss

If there is no licensing issues - then I could advice SOA Suite installation - there should be AS as well and many other features (BPEL e.g.). Personally I cann't see any need for installation manual as all the installation and configuration assistance poceeds automatically. Documentation can be found http://www.oracle.com/technology/documentation/appserver.html - usually zip contains large library of pdf, installation manual including.
Well - my problem is that I have installed partially SOA Suite (configuration assistants failed at web services) on machine without DB server, then I installed DB server and now I am trying to deinstall SOA Suite - but now for some days machine shows 100% CPU consumption and no any visible actions (no new errors as well)... What should I do? Kill the process and try to manually remove SOA? I plan after make another SOA installation after removal of this one.
Thanks in someone can help me!

How to install Oracle Applications on Fedora Core 6?

Similar Messages

Maybe you are looking for