How to install printer canon MX 393

Dear Sir,
could u help me how to install printer canon MX 393.

This explains:
http://support.apple.com/kb/PH14143

Similar Messages

How to install printer drivers for monarch

Dear Friends,
I got requirement where users are going to use new printer for Bar code printing.
Kindly suggest on how to install printer drivers in SAP.
regards
Jiggi

Hi,
In tcode SPAD, goto "Utilities --> For device types --> Import".
There are specific notes regarding specific manufactures, search the SAP portal for notes in application area BC-CCM-PRN-DVM.
Check SAP Note 8928 for a start.
Regards,
Muralidhar

How to install printer drivers....

HI
Can any body tell me about how to install printer drivers. In my case standard drivers(sapwin,swin ..etc) are not supporting. printer drivers are available in Manufacturer site . Can any body please suggest how to install the drivers.
Please give me the steps ,
Message was edited by:
venkateshwarlu veeramalla

You will need to create separate device types for each printer family installed at your installation or if each printer family require either simplex or duplex printing.
1. Go to Spool Administration screen by using transaction code SPAD from the initial screen of SAP.
2. From the SPAD screen choose menu path Utilities-->for device types --> IMPORT (or you can run RSTXSCRP program from SE38, too).
3. In the initial screen of SAPscript Export to Dataset/SAPscript Import from Dataset enter the following:
a) Check Radio button for device type.
b) In the Object Name field enter object name of the device type file (please see the table at the end of this document for object names)
c) MODE must be IMPORT
In the Ctrl parameters for file operation
d) Check radio button for "From/on frontend" ( Generally this would be the default)
That's it. Don't enter anything else. Execute by clicking execute button or function key F8.
4. In the Create Object Directory Entry window that pops up, enter your development class and press enter
5. You will get a pop up Window Import from a Local File. Browse through the Window to enter the filename in your local directory and click Transfer button.

How do I install Printer Canon MF6550?

Hello,
I'm trying to install the Canon MF6550 and I can not get it to print. When I go to add a printer "Canon MF6500 Series (UFRII LT)" shows up. I select it and then go to "select printer software" and select "Canon MF6500 Series UFRII LT (US)" but when I go ahead and try to print I get this message "Cannot communicate with the printer, or the printer is not supported, check the printer connection and add it again. Then, if the print dialog box has a printer info button, acquire the printer information: 10322"
I'm not sure what I'm doing wrong. Any advice would be great.
Thank you so much,
Anna

Hello Anna and welcome to Apple Discussions.
The UFR II driver used by the Canon MF series requires bi-directional communication. This is usually no issue with the printer connected directly to the Mac via USB cable, however if the printer was connected to some other device, such as a wireless router, a USB print server or even another computer and shared, then the driver is unable to function correctly and shows the error you are currently getting. If you do have the printer connected directly to the Mac via a USB cable then the cable may have a fault and is stopping the communication with the printer.
Also, not sure if this model supports Ethernet connections, but if it is connected via Ethernet to your Mac then there could be a problem with firewall settings or port filtering.
Can you reply with how you have the printer connected to your Mac.
Pahu

How to install printer and modem in solaris

Please send me detailed installation information about how to install a serial or aparallel printer on solaris 7 and 8 and also how to install the modem on solaris 7 and 8.pls send me some docs,informations etc.

Solaris 8 includes an "answerbook" CDROM that explains this
in great detail. Look in the <tt>Solaris 8 System Administrator Collection</tt> �
<tt>System Administration Guide, Volume 2</tt>.
You can also read the answerbook documentation online on
http://docs.sun.com.

How I install printer sharp al-2050cs??

I would like to know how I install a Sharp AL-2050cs printer in my apple computer.

There is no software to enable this device to work with a Mac. The printer language is proprietary (SPLC Sharp Printer Language with Comprression) printer language. I cannot find where Sharp ever supported this printer on a Mac.

How to install printer on 1tb tc

I have a first gen 1TB TC and trying to install a usb printer (Canon MP MX860) so my imac and PC can used the internet and print to the printer. I am running Lion on iMac and Win 7 on PC.

Thanks for your reply.
Yes I think so, but mannual of router has not even indicated about that. It says that IP of print server is 192.168.1.254. It doesn't say that it's IP of the router. Even in router's cutomized settings it refers to it as print server's IP. And it is preassigned.
thanks again. i hope you'll try to find a solution.
jurry

How to install Printer driver *

Hi,
How to install HP printer driver , so that i can see new device type in SPAD.
Thanks
Lisa

Hi Lisa,
you need to use the program RSTXSCRP, but take care and check documentation maybe on http://help.sap.com
Good luck
Fred

How to install printer which is not listed in the software list

I just bought Canon MX372 and I am having a hard time installing it. I have installed the software that came with it and yet I can't add it as printer?
It is always giving me a msg to update the software and when I accept to update it takes a minute and then says software is not available?!!
any idea what is going on?

Okay.
First, got any third-party login items? If so, disable them (and list here for info).
Got any other third-party software that might impact printing?
Then try this:
Keep the installer or dmg you just downloaded from Apple if you haven't already trashed it.
If you haven't done so, repair permissions on startup drive and reset PRAM.
Then go to Print & Scan prefs and delete any printers.
Then go to Macintosh HD/Library/Printers. (You will have to enter password to authorize this)
Restart.
Be sure printer is connected (hard wired, not wireless) and turned on.
Then reinstall Canon drivers downloaded from Apple, restart, and attempt to install printer.

How do install printer IP1600 using Windows 7?

Please, could anyone inform how to install a printer IP1600 when using Windows 7?
Thanks in advance.
Carlos

I don't understand what you're asking. iOS 5.1 is the latest version of iOS that exists. If you have iOS 5.1 on your iPhone now and are trying to go back to an earlier version of iOS, that's not supported.
If that's not what you mean, then you need to explain more clearly what it is you are trying to accomplish.
Regards.

Written instruction how to install a Canon SD 770 IS Battery Door Cover?

Hello,
Re: Canon SD 770 IS Battery Door Cover Replacement
Do you have a description how to install this battery cover? You can’t just pop it in, probably have to loosen some screws on the body.
Thank you,
Bernd

bkeine wrote:
12 JAN 2014
This is not a satisfactory answer - for me. This minor repair to be performed by a Canon Factory Service Center Technician will probably cost me half the price of a new camera.
I am an engineer and well versed with watch and similar repairs, therefore a simple sequence of removing screws etc. would have been sufficient.
The battery door cover is extremely flimsy plastic and breaks very easily, probably by loosing the softeners over time which leads to the part becoming very brittle. Numerous websites selling this item attest to that.
I was hoping that a forum would give people some practical advice and not simply refer to a factory repair.
That I could have done by myself.
Thank you,
Bernd
I'm sure your snarky reply will get you satisfaction.

How to install Printer HP LaserJet P2015 in Windows 7!

Dear all!
I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
Thanks a lot and I am looking forward to hearing from all.
My best regards,
LUCK
This question was solved.
View Solution.

Hi LUCK,
The printing functionality for your driver is prodided by the HP Universal Print Driver.
You may download the driver by clicking the Download button from the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
If you may find it hard to understand any of the installation steps, you may find the full details below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Please let me know of any needed clarification.
Sincerly,
Shlomi
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install printer in windows 7 from print server without downloading the driver access denied

Hi dears,<o:p></o:p>
i am trying
to install printer driver which is installed in win server 2003 into win 7, but
after connecting it says access denied, looks like the win 7 does not have a
power user to install the driver.<o:p></o:p>
now the IT
in charge do not want to change the GP in the domain (win 2008 R2) and he want
the printer driver to be installed without the it involvements.<o:p></o:p>
as i can
see only thru GP in the DC you can do this, am i correct??<o:p></o:p>

You are looking for this information
http://social.technet.microsoft.com/Forums/windowsserver/en-US/dc4fcf93-8268-44f4-822a-d463d9443f6c/windows-7-and-server-2003-printer-server-issues?forum=winserverprint
Alan Morris Windows Printing Team

How to install printer on RG11B ?

Hello
I'm having problems installing my Officejet 5110 printer on USB port of my RG11B Wireless gateway with print server.
I'm running XP Home.
Printer works fine when I install directly on my laptop (wireless 802.11b). But when i connect my printer to RG11B and add standard TCP/IP Port (192.164.1.254), my laptop does not detect (rocognize) the device. I have also selected LPR protocol and printer queue name as lpt1 as shown in the status of gateway.
Remember, router's status does show me that HP Officejet 5100 series printer is attached, Printer port 192.168.1.254 and print server name as lpt1.
my internet and network works fine through router. Only problem is installing printer on print server.
Thanks for help
[email protected]

Thanks for your reply.
Yes I think so, but mannual of router has not even indicated about that. It says that IP of print server is 192.168.1.254. It doesn't say that it's IP of the router. Even in router's cutomized settings it refers to it as print server's IP. And it is preassigned.
thanks again. i hope you'll try to find a solution.
jurry

How to install printer software with no CD player

I've installed the HP Envy 5530 e-all-in-one series software on my laptop and can print successfully, but I cannot connect to the device for scanning. I installed software on my laptop using a download link from the HP site. In my control panel setup it indicates that the HP software was a basic install and that I should re-install the software from my CD to enable all features. I have the CD that came with my printer, but my laptop doesn't have a CD player.
How can I get the complete software installed on my laptop so I can both print AND scan?

Simply download the 'full featured software and drivers' from the HP web site. Now install.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to install printer canon MX 393

Similar Messages

Maybe you are looking for