How to install the Canon IR C4580 using OSX 10.6.6

We have a Canon IR C4580 at the office hooked up to the network. For the life of me I cannot install the printer to my new laptop, although it works fine on my old G4 desktop as the driver was installed on a previous version of OSX, now running on 10.6.6.
Does anyone have an update when Canon will have a fix to install the IR C4580 properly on OSX 10.6.6?

bdapice wrote:
Does anyone have an update when Canon will have a fix to install the IR C4580 properly on OSX 10.6.6?
The current UFR2 v2.2x driver is working fine on 10.6.6. If your iR C4580 has Postscript support there is also the Canon PS3 v3.20 driver and the Canon PPDs. If your iR C4580 has an imagePASS-H1 attached, which is a white metal box that will be hanging on the back of the copier, then you will need to ensure the H1 has system version 2.0 so that you can use the OS X 10.6 driver for the H1.
So can you confirm which printer controller you are using with the iR C4580.

Similar Messages

  • I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

    If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
    I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

    The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
    If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
    Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
    Allan

  • How to Install the Cubes(SD & MM) by using the Business Content

    Hi All,
    Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
    And also require any Material & Navigation steps for to do this...
    Reply back me to [email protected]
    Regards,
    Kiran

    I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
    stage, as nobody has answered, I would recommend that you call Intune support.
    You will find your local Intune support number here
    http://technet.microsoft.com/en-US/jj839713.aspx
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

  • I just bought a new computer and want to load in photoshop from the old one.  I have CS5.  Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade.  Any advice?

    How do I transfer photoshop from one computer to another?  I have CS5.  Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade.  Any advice?

    karen2179 wrote:
    If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
    No, but it may help the chances of a successful installation.
    karen2179 wrote:
      Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer.  What?  Am I getting spammed on Adobe's site here?
    Where did you see that?

  • On a new imac how much of the HDD is already used with the OS,iLife,apps..

    Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
    My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
    I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
    cheers

    Here's are some disk usage information from my 20" white C2D. The numbers
    are running totals that include periodic software updates and some of my own
    stuff -- but that would be less than 0.5 GB of the final total.
    OS-X with "no optional packages" is a very usable system; it includes 'core'
    applications such as Safari, iTunes, Quicktime. It does not include any of the
    iLife apps or the iWork/MS_Office test-drive bloatwares.
    The large increase in disk usage for a minimum Leopard system is partly due
    to the inclusion of more apps in the 'core' OS package. Some things that were
    optional in Tiger have become part of the "minimum" Leopard install.
    The Xcode software development tools are a standard part of every OS-X
    distribution, but since most customers have no use for them, they're not
    included in the factory-installed disk image. If you don't plan to install
    them, subtract 3.4 GB from the final tally.
    Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
    Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
    SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
    Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
    SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
    Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
    Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
    SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
    IMO, 250 GB is FAR more than you'll ever need for installable software plus
    a sizeable collection of music/photos. OTOH, no amount of disk space will
    ever be enough for an avid music/photo/video junkie, and everyone should
    have an external backup drive. So, stick with the standard internal drive and
    buy more external storage.
    ...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
    Looby

  • How to install the windows7 agent and monitor the same machine

    Hi ,
    I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
    Can you please guide me how to install the agent on windows and monitor the same?
    OEM version: 11.1.0.1
    Thanks in advance
    Regards,
    Kishore Tummeti

    If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
    Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
    Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
    Eric

  • How to install the oracle lite mobile server?

    hi,every one!
    I follow the wizard of the oracle lite mobile server,then
    pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
    tells me that "invalid server name",how can i do?
    somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

    Andy,
    It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
    Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
    TNX,
    Phil

  • How to install the same copy of creative suite on the second computer?

    Basically I am using a Macbook Pro and upgraded my hard disk. A
    After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

    Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • How to install the musegrid audio widget?

    Does anyone know how to install the MuseGrid Audio Widget. Once I get in in the library I drag it onto the page, preview it and nothing show in the browser. I have the assets folder that comes with it but have no clue how to connect the widgets assets to the audio player. As well as how to connect the mp3 file to the audio player.
    There are no clear cut instructions about the install and even on the page I downloaded it from the video tutorial does not play. I think I gave away $9..Please Help

    Unfortunately I can't help with that particular widget, however I will mention that we do also have an audio widget over @ MuseThemes.com. There is a training video on this page that explains how our Audio Widget works - you might have some luck getting your downloaded widget to work by using a similar method as we use...
    Adobe Muse MP3 Audio Player Widget
    Cheers
    SH

  • How to install the Leander Script

    I do not understand how to install the Leander Script that I received as a gfit with my purchase of Adobe.  The instructors say navigate to the folder where the fonts are.  Then it says to select the fonts.  I do not see how to select the fonts, then right click the fonts and choose install.  I do not see these aspects of the instructions.

    HI,
    First log on to your target client.
    Go to SE71 initial screen.
    Here go to Utilities --> Copy from Client..
    now u will get a screen from where u can copy the form form source client to current client...
    OR u can do the following
    you can use the tcode scc1 in the target cleint so as to copy from the developed cleint.  Then you need to give in the request number only and click on start immediately.
    Hope this helps

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • How to install the Recovery Catalog

    Hi:
    How to install the recovery catalog? I used the following commands from the menu and it didn't work:
    connect rman/rman
    @?/rdbms/admin/catrman
    There is no catrman.sql exists.
    Thank you very much.

    If you are using Oracle8i, make sure your compatibility is set to at least 8.1.0 and you are connected to the catalog database. Then type create catalog; at the RMAN command line.

  • How to install the SAP Java Connector

    Hi,
    I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
    ===
    u2022 Copy the librfccm library and the libsapjcorfc library to busines
    sobjects_root/enterprise120/PLATFORM_PATH, where busines
    sobjects_root is the full path to your businessobjects directory,
    and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
    is solaris_sparc for an installation on Solaris.
    u2022 Use symbolic links for the location of the librfccm library and the lib
    sapjcorfc library.
    u2022 Add the location of the librfccm library and the libsapjcorfc library
    to the library path.
    ===
    Do I have to do all 3 steps or is the 1st one (copying of files) enough?
    On the other hand, the SAP Java Connector guide says:
    ===
    Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
    Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
    ===
    So, what to do?
    Thanks!

    Thanks for your help. So i copied the 2 files as mentioned in point 1.
    Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
    I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
    I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
    Thanks again!
    Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

Maybe you are looking for