How to install the Solairs 9 without change my existing partition?

I got 2 partitions on my hard drive: 1)Primary partition, running Win2000, occupied 40% of my hard drive.
2)Ext partition, which divided into two drives E & F. I want to install the Solaris 9 on the E drive with out change to other drives(C,F).
Q1: Which following selection I should choose from the Installation program: 1) Create a partition 2) Specify the active partition 3) Delete a partition 4) Exit 5)Cancel
Q2: Is there any detailed installation info for those who just want to add Solaris to their existing parition?e.g: How to set up SWAP drive?
Thanks,
New to Solaris

I cannot advocate strongly enough that you get a removable hard drive enclosure. I have these on three of my PCs and it's a god-send.
It's a unit that sits in one of your 5-1/4" bays and attaches to your regular IDE cable. Each hard drive that you want to swap out is in its own tray. When you want to boot to a new operating system, shut down and switch trays. It adds about 10 seconds (if that) to the reboot that you would have to do anyway to get to the other operating system. With this method you have absolutely no need to mess with dual-booting since each operating system will have its own hard drive.
They're not expensive either. The appropriate products from Lian-Li used to be about $25 for the 5-1/4" enclosure and one drive tray and about $17 for each additional drive tray. There are similar products available fromStarTech. They're of a higher quality but are more expensive.
Trust me. Get a removable hard drive kit. You'll never want to mess with dual-booting software again. I know that I never will.

Similar Messages

  • I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

    If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
    I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

    The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
    If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
    Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
    Allan

  • How to install the Oracle Apps R12 with an existing OAS 10g

    Hi All,
    I am planning to install the Oracle Apps R12 and I already downloaded the media-pack from edelivery.oracle.com.
    But I am not sure how to do it because I have tree-tier architecteur at home :
    One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
    One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
    One computer with XP OS -- Client tier
    Could any one explain me how to install it?
    Regards,

    But I am not sure how to do it because I have tree-tier architecteur at home :
    One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
    One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
    One computer with XP OS -- Client tier The above is two tier architecture (not three tier) as the client tier is not considered as a tier in Oracle Apps installation.
    Could any one explain me how to install it?Do you already have a Database and Oracle AS10g installed? Please elaborate more.
    Oracle Apps R12 comes with 11gR1 database, and to do multi-node installation please refer to these threads.
    R12 Multinode installation
    Re: R12 Multinode installation
    Install oracle EBS R12 on 2 machines
    Install oracle EBS R12 on 2 machines
    To upgrade the database later to 11gR2, please refer to:
    11gR2 11.2.0.2 Database Certified with E-Business Suite
    http://blogs.oracle.com/stevenChan/2010/11/db_11gr2_11202_ebs.html
    Thanks,
    Hussein

  • How to install the iPhone 5 without a SIM card?

    Wie kann man das iPhone 5 ohne SIM Karte aktivieren?

    No. You cannot activate the phone without a SIM.

  • How do i install the free apps without credit card detail

    how do i install the free application without credit card detail

    How to Get Apps From the App Store Without a Credit Card
    http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
     Cheers, Tom

  • Hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

    hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

    <moved from Downloading, Installing, Setting Up to Creating, Editing & Exporting PDFs>

  • Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.

    Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.

    The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • How to install the CMS

    Hi i am trying to create track
    i installed Netweaver 7.0 with SP14. 
    I configured the sld and its working fine
    now i am in the stage to create the Track for development.
    In the process of crating the track its asking the CMS URL and User Id and Password.
    Please let meknow
    1 .how to install the CMS server and ?
    2. What is the URL and UID /Password.
    3. I am not able to see the NWDI roles in my server
    Please let me know how to achive that.
    Thanks
    MMukesh

    Hi,
    See It depends upon your landscape..
    If you want to transfer the Dev to Quality..
    --The basis team should create the all respective track..
    --After activating your Objects in IR ,ID  you will get another option in change list there you have to rclick and click on transport automatically transfered to QA..
    The other way is through file you can transfer..export ,import... options..
    -- this is you have to export the objects by SWCV or namesapce wise .. the all object will be stored under one path in server .. next you have to prepare the excel sheet you objects ..then the basis team will transfer the tpz file to qa and there it will be imported..
    Please see the CMS transfer links..
    Please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
    Where can I get installation files of DTR, CBS, and CMS?
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
    'How ToTransport XI Content Using CMS'.
    /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    Regards
    Chilla..

  • How do you make audio fast without changing pitch?

    How do you make audio fast without changing pitch?

    PrPro may have that but I've always just gone over to Audition ... you change speed there, you're given a choice of keeping the pitch the same or allow it to change. Note ... if there's much cha ge in speed the result can be odd.
    Neil

  • Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

    Be sure you have prepared the new drive correctly:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • PSE 6 for Mac, how to install the new layer mask tool

    I just bought the new PSE 6 for Mac, whew what a change in the color of workspace.
    My classmates and I are wondering how to install the free layer mask tool that Sue Chastain has on her About site.
    Or perhaps first, has anyone used it and do you like it?
    Do you put it here?
    http://www.jcarter.net/mac-stuff/layermaskthing.jpg
    Havent been to this great forum for a while, been busy, I miss you all, and shall try to visit more often.
    I remember when I was a beginner at this, I learned so much here and you all were amazing help!
    Thanks,
    Jane

    Hi Barbara,
    Its this one,
    http://graphicssoft.about.com/od/pselements/p/layermasks.htm
    So I assumed afterwards that it wasn't for Mac. So I went ahead and installed the older action for my PSE 4.
    I was hoping it was platform agnostic, but when I looked at this, the difference between the 2 versions,
    http://www.jcarter.net/mac-stuff/previewfolder-missing.jpg
    Not knowing where the Previews folder was, threw me overboard.
    And I didn't read all the way down Sue's page, as my old brain got ahead of my eyes.
    So I really dont know what to do next with this, some of my classmates are wondering the same thing.
    Thank you,
    Jane

  • HT4623 i purchased an iphone 5 from UAE & after setting up everything i can't see the facetime icon in setting. please advise on how to install the facetime.

    I purchased an iphone 5 from UAE & after setting up everything i can't see the facetime icon in setting. please advise on how to install the facetime.

    i bought it from UAE but not using it there. i am in Kurdistan at the moment &  installed the Kurdistan local sim in it.
    I can see the facetime here on other Iphone 4s which working perfectly without any issues but couldnt find the reason for the Iphone 5.

Maybe you are looking for