How to install two or more exe files in a single set up ?
hi
I want to make a setup (deployment project ) using visual studio 2010. my requirement is to install a third party software before installing my windows form setup application. how can I manage the setup creation process ?
Hi jagabandhu Patro,
According to your description, you'd like to add your own custom prerequisite to winforms setup application.
I suggest you using Bootstrapper Package to manage the prerequisites.
You could get the steps about how to use Bootstrapper in the following articles
https://msdn.microsoft.com/en-us/library/ee726596.aspx.
https://msdn.microsoft.com/en-us/library/ms165429%28printer%29.aspx?f=255&MSPPError=-2147217396
http://www.codeproject.com/Articles/15863/Add-your-own-custom-prerequisite-to-quot-ClickOnce
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
How to show two or more PDF in one PDF-Reader / Concatenate PDF-Files
Hi,
I want to show two or more PDF files in one PDF reader window or to concatenate two or mor PDF files to one file.
We use WD4A and ADS.
Have someone an idea to solve this without an external program?
Thx in advance
JürgenWe have done this successfully a few times using WDA - it wasn't easy - it took us 2 full weeks to figure it out, so i need to get full points for this one!
It's going to much easier to do this if you start a brand new WDA. If not, you'll have to re-do all your Context Node navigations within your methods.
The first thing you need to do is to define your Context properly:
You need a top level Node defined as 1:1 cardinality (as with all PDF development)
Next, you need another Container Node 1:n cardinality (this holds the collection of content nodes)
Finally, you have your PDF Content Node 1:n cardinality - This holds each instance of your PDF form
In our scenario, we are passed in a list of Project Numbers. We need to generate a PDF sheet for each project in the same PDF session.
pseudo code - i'm leaving out some of the unnessary details
Loop through the project number table.
ADD 1 TO v_cnt.
* navigate from <TOP> to <PDF_CONTAINER> via lead selection
lo_nd_pdf_container = lo_nd_top->get_child_node( name = wd_this->wdctx_pdf_container ).
* This is the Important Part - we check to see if there is an element where index = v_cnt
* If not, we create one where we can store the new set of data
* get element via lead selection
lo_el_pdf_container = lo_nd_pdf_container->get_element( index = v_cnt ).
IF lo_el_pdf_container IS INITIAL.
lo_el_pdf_container = lo_nd_pdf_container->create_element( ).
lo_nd_pdf_container->bind_element( new_item = lo_el_pdf_container
set_initial_elements = ' ' ).
ENDIF.
lo_nd_ideasheet_data = lo_el_pdf_container->get_child_node( 'IDEASHEET_DATA' ).
lo_el_ideasheet_data = lo_nd_ideasheet_data->get_element( index = 1 ).
* fill all the data then bind the structure
Select * from XXX into lt_XXX
where project_number = lt_project-project_number.
* Move Data to appropriate fields/tables
* Bind the info back to the element
lo_el_ideasheet_data->set_static_attributes( static_attributes =
ls_ideasheet_data ).
Endloop. -
I want to join two or more xml files and create a nw xml or html file w/o using java!!
Is it possible with only xsl. if yes how?
RajuSure it's possible with XSLT.
Just use the document() function to refer to one or more additional source documents. I recommend using an <xsl:variable> to capture the secondary document in a variable so you can easily refer to it any number of times in the stylesheet.
So, at the top-level of your stylesheet, just do:
<xsl:variable name="otherDoc" select="document('otherDoc.xml')"/>
Then anywhere you want to select nodes from the secondary document (will the full power of XPath), just start your XPath expression with the $otherDoc variable like this:
select="$otherDoc/something/somethingelse[somepredicate-if-needed]"
In this way you can combine the values of the current node in the main source document to lookup corresponding nodes in the secondary document and do joins this way. -
How could a button open a EXE file in any position?
How could a button open a EXE file in free position?
I am very confused, I am searching the issue for two days, I just could use fscommand function open a EXE file in a fixed opsition, where must be in the same root with the .swf(change into .exe form at the same time). but how I open the target in a position where I want? Is that possible in Flash?
help!, thanks a lot~well you can publish the the other FLA, which would give you
an HTML file, upload that and the SWF then link to the SWFs' HTML
page. -
How to send two or more XML request messages to call ALSB from ALBPM
Hi All,
I have a scenario where two or more XML messages needs to be sent to the ALSB component from the ALBPM part.
How can this be achieved using PBL coding.Please help me on this.
Thanks,
Prakash.Hi,
Based on my test, I agree with Mr. KR, we could not open two or more xml files with the same name located in different folders with Excel 2013 at the same time, because XML is not the default format of Excel.
Would you like to tell us the reason about this behavior, we might try the other methods to get your goal.
If you have any update, please feel free let us know.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
How can I script a Flash .exe file to always stay on top of all other windows?
Hi All,
I'm new to action script, and I just need this one script
> How can I script a Flash .exe file to always stay on top of
all other windows?
Basically what i want to do is have a flash-created
step-by-step instructional movie, but for the movie to remain on
top of all windows so the instructee is able to follow the
instructions on-screen...
It would be preferable to not have to buy another product
just to do this... as I said, this is the only scripting I need.
Thanks in advance
Cheers
Rickif you create your exe with mProjector you can use one of its
new AS
commands to do this.
setZOrder
http://www.screentime.com/software/mprojector/docs/mWin_setZOrder.htm
all APIS
http://www.screentime.com/software/mprojector/docs/index.html
Demo
http://www.screentime.com/software/mprojector/demo.html
mProjector installs new classes and help into Flash, to
enable them you
must build your app with mProjector (its input is your swf)
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com -
How to install leopard from a DMG file instead of DVD
How to install leopard from a DMG file instead of DVD, When i open this file, click restart, NOTHING happened!!!!!!
Use Disk Utility to restore the DMG to a blank partition, then use the Startup Disk preferences pane to reboot from that partition. Why not just install from the DVD, though?
-
How to install a Application in *.jar file format?
How to install a Application in *.jar file format?
I have taken the *.jar file into the device into media folder. but device is not recognizing the file format
could some one plz provide some suggestion to proceed with this?
Thanks
Mohamed JaveedI'm having the same problem. I've put .jar into the 'system' folder but that doesn't seem to make the program work neverless see it on my device. Help.
-
HT1355 How to send 2 or more pdf files in e mail
How to send 2 or more pdf files in e mail...????????
Also i have a workspace created in html.oracle.com in that when i want to upload excel file or copy data from excel i am getting error as......
ORA-20001: create_table error: ORA-20001: Excel load run ddl error: ORA-01658: unable to create INITIAL extent for segment in tablespace FLOW_6868Looks like the data you're trying to load will exceed your workspace quota (2MB small, 5MB medium). Try loading fewer rows. -
How to install and verify the license file on ASA 5512-x
Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish KumarHi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf -
How can I use an old XMP file on a new set of images??
I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
<crs:Version>6.0</crs:Version>
<crs:ProcessVersion>5.7</crs:ProcessVersion>
<crs:WhiteBalance>Custom</crs:WhiteBalance>
<crs:Temperature>4700</crs:Temperature>
<crs:Tint>+4</crs:Tint>
<crs:Exposure>-0.35</crs:Exposure>
<crs:Shadows>5</crs:Shadows>
<crs:Brightness>+50</crs:Brightness>
<crs:Contrast>+25</crs:Contrast>
<crs:Saturation>-8</crs:Saturation>
<crs:Sharpness>25</crs:Sharpness>
<crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
<crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
<crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
<crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
<crs:VignetteAmount>0</crs:VignetteAmount>
<crs:ShadowTint>-1</crs:ShadowTint>
<crs:RedHue>0</crs:RedHue>
<crs:RedSaturation>0</crs:RedSaturation>
<crs:GreenHue>0</crs:GreenHue>
<crs:GreenSaturation>0</crs:GreenSaturation>
<crs:BlueHue>0</crs:BlueHue>
<crs:BlueSaturation>0</crs:BlueSaturation>
<crs:FillLight>0</crs:FillLight>
<crs:Vibrance>+5</crs:Vibrance>
<crs:HighlightRecovery>24</crs:HighlightRecovery>
<crs:Clarity>+8</crs:Clarity>
<crs:Defringe>0</crs:Defringe>
<crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
<crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
<crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
<crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
<crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
<crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
<crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
<crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
<crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
<crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
<crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
<crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
<crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
<crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
<crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
<crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
<crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
<crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
<crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
<crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
<crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
<crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
<crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
<crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
<crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
<crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
<crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
<crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
<crs:SplitToningBalance>0</crs:SplitToningBalance>
<crs:ParametricShadows>0</crs:ParametricShadows>
<crs:ParametricDarks>0</crs:ParametricDarks>
<crs:ParametricLights>0</crs:ParametricLights>
<crs:ParametricHighlights>0</crs:ParametricHighlights>
<crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
<crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
<crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
<crs:SharpenRadius>+1.0</crs:SharpenRadius>
<crs:SharpenDetail>25</crs:SharpenDetail>
<crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
<crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
<crs:GrainAmount>0</crs:GrainAmount>
<crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
<crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
<crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
<crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
</crs:ToneCurve>
<crs:CameraProfile>Adobe Standard</crs:CameraProfile>
<crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
<crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings. You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything? -
I am beginner in MVC and I would like to create a view which populates two (or more) joined tables in a single view table as described below.
I have two tables:
1 - Bloggers: - bloggerID (int);
- bloggerName (string)
2 - Blogs: - blogID (int);
bloggerID (int);
- blogTitle (string);
- blogImage (string)
A blogger can have one or more blogs while one blog must be related to only one blogger.
I would like to have a view table on my webpage as the following:
Blogger Name
Blog Title
Blog Image
Noris Gang
Virus
virus.jpg
Noris Gang
Desktops
desktop.jpg
Gauthier
Books
books.png
John Leon
NNNMHJhjdhj
Nmbj.jpg
I'm using MVC 4 (or at least 3).
Thanks for your help.Hello,
From your description, it is not very clear that what you mean about the View, if it means the View concept in database as SQL Server, your required view should be as below:
Create view
as
Select Bloggers.bloggerName, Bloggers.blogTitle, Bloggers.blogImage
From Bloggers join Blogs on Bloggers.bloggerID = Blogs. bloggerID
If it means the UI view in MVC concept, I suggest you could ask it on the MVC forum:
http://forums.asp.net/1146.aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Install two third party exe's with labview 8 install file
I am trying to install two thrid party drivers onto a deployment machine. I am using labview 8.0 and am deploying the application on a XP machine. The program was developed on a XP machine so that is not an issue. I have created a batch file that works fine when run after the install by itself, but when i include it in the installer properties--advanced--launch exe after install it runs the batch file but doesn't install the drivers. I tried using a dummy batch file that waits then calls the batch file containing the paths for the drivers to install but that didn't work either. Urgent help would be greatly appreciated.
Mark Mutton
Electrical EngineerHi Mark,
I found two KBs that talk about launching an exe with an installer as well as how to create a simple batch file.
How Do I Make My LabVIEW-built Installer Run an Executable
After Installation?
Creating a Batch File
Hope this helps.
Regards,
Nadim
Applications Engineering
National Instruments -
How do I install Photoshop from the .exe files I got from Adobe?
I downloaded Photoshop CS2 from Adobe's site. That download gave me 5 .exe files, including CreativeSuiteCS2Disc1.exe, CreativeSuiteCS2Disc2.exe, and CreativeSuiteCS2Disc3.exe.
When I clicked on CreativeSuiteCS2Disc1.exe, files were extracted and installation began. I put in my serial number and other information, and things seemed to be going fine. Then a window popped up with the message "Please insert Disk 2." Well, I don't have a Disk 2.
My download included a file "CS2_install_Win.pdf." In those instructions, it says "the InstallShield wizard may return an error, "Please insert disk [ number ]." If this error occurs, click OK in the dialog box and then double-click the disk image to which the installer refers to manually extract the disk and complete the installation." So, I clicked on CreativeSuiteCS2Disc2.exe, which overwrote the extracted files from CreativeSuiteCS2Disc1.exe. But the box saying "Please insert Disk 2" didn't go away. No matter how many times I clicked "OK" it just stayed there.
Still, CreativeSuiteCS2Disc2.exe ran, and when it was done I got a message that installation was complete. But, when I tried to run CS2, I got an error that my serial number and organization were invalid or not installed properly. I know they were installed because I put them in when I ran CreativeSuiteCS2Disc2.exe
So, given that following the pdf instructions that came from the download don't seem to work, can anyone out there offer me better instructions on how to do this installation? I was thinking of extracting each .exe file to a CD, then just inserting those CDs one at a time. Will that work?Missing personalization infopoints to permissions/ user privileges issues which are to be expected with such old versions on contemporary operating systems. Run as admin, turn off security stuff, try compatibility modes. Actualyl burning the discs will of course work, but you might look into simply mounting folders/ disc images as virtual drives e.g. using Daemon Tools Lite or your disc burning software's own disc mounter.
Mylenium -
Merging two or more audio files, by a contextual menu item within the finder
Hello, everyone,
I want to merge or concatenate two or more simple audio files (wavs at the same sample rate and bit depth) into a new wav file - which don't need any conversion. I want to do this using a contextual menu service within the finder. Is there any possibility to do this? I can't find any software in the market that will allow me to do this.
so that,
'start.end_1.wav' + 'start.end_2.wav' + 'start.end_3.wav' = 'start.end_1&start.end_2&start.end_3.wav'
Can anyone help? would sox help me with this, and if so, how to add it onto a finder contextual menu?Both of those directories are empty and I have deleted them and re-created them. I have been able to add and remove plugins for other applications so this is very strange.
Using "Easy Find" I did locate a preference file, which I have deleted but that has not resolved it. I have tried safe mode and single user mode but no luck. I couldn't find any automator actions either.
When I click on the menu item it says "ClamXav is not installed. Please install ClamXav and try again" so it knows it needs to use this program somehow.
It's very odd and must be a result of a crash I had, though I would love to get to the bottom of it, it isn't serious and will hopefully go when I upgrade to Snow Leopard
Thanks for your help though as it has taught me a few things!
Maybe you are looking for
-
UNSUPPORTED : The way it works Apache with OC4J via AJPV13 with mod_jk
RDBMS Version: 8.1.7.x Operating System and Version: SUSE Linux 7.2 / Win NT/2k/XP Product (i.e., OAS, IAS, etc): 9ias 1.0.2.2 OC4J 9.0.2.0.0 Product Version: JDK Version: 1.3.1 Error number: UNSUPPORTED : The way it works Apache with OC4J via AJPV13
-
ATP check on Sales order items not due for delivery?
All, In our Sales order, we have a number of dummy material lines. Now, when I use the normal sales order ATP check button, SAP does nothing. However, we have a custom program that does an ATP check, and it returns a zero qty. My question is, how do
-
Problem in Uploading Excel Data ! - Urgent
Dear Experts, I am uploading excel data using FM 'TEXT_CONVERT_XLS_TO_SAP' , its directly convert data and store in internal table same as in excel sheet(row , column wise). But the problem is , one of the column having description more then 500 char
-
There is requirement of Mass Updation of Bubble Text Contents of group of Topics in one go. Standard process is to open respective Module/Section/Topic, and then modify Bubble text as per need. This will be time consuming if there are 50 Scripts wher
-
hi everyone I am sorry to put my post here, because I could not put the post on the "Remote Desktop". Why? I don´t know. I went though many messages about "Can´t install by using remote desktop", because it needs a software "PackageMaker". I have som