How to install USB mouse?

I have looked for the answer all over the place. Can you connect a USB wireless mouse to a MacBook Pro? It is not a bluetooth mouse, just USB-- nothing fancy.
I cannot figure this out for the life of me. Please help!
Veronica

There is a part of the device that plugs into one of the USB ports on the side of the Mac. Then you need to put batteries in the mouse itself and then turn it on. There should be a little switch on the bottom of the mouse to turn it on and off (Make sure you turn it off when you are not going to use it for a extended period of time. Otherwise the batteries will go dead on you).
There should also be a littl button on the bottom of the mouse so it can Connect/Sync with the reciever you plugged into the USB port on the Mac. Sometimes you have to use that small button and sometimes you don't for the mouse to connect to the reciever.
Most Wireles mice also go to sleep on their own to conserve the batteries. So if you walk away from the computer for a period of time and come back to find the mouse isn't moving the cursor on the screen you have to click one of the buttons on the mouse to bring it back to life.

Similar Messages

How to install USB modem MF110 ZTE to work in RDS network in Romania, on Mavericks?

Please help me!:)

How to install USB modem ZTE MF 110 to work on Mavericks, in RDS network, in Romania? Somebody knows? Please help me! Thanks a lot!

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to install usb to serial emulation driver

HI all!
I am trying to develop one application which communicate to embedded system via USB. I would to get your thought about how to install third part USB to Serial emulator in PC when the application is installed in the PC. ( Normally it is done by device manager and update driver). I am using LV11 sp1.

I am afraid the is no .exe avilable. but there is .inf file avilable. Is it possible to infom window about it in labview. When i install the application and plug the device using USB window recognises the device but no comport it shows. When i update the driver by righght click device manager then lv application can perfectly communicate with the device. I want to avoid the step of updating the driver. I want the lv automatically update the drive when instlled.

How to install a mouse model M5769

I WANT TO ADD A MOUSE TO AN APPLE MACBOOK 2010 BUT I CANT, HOW CAN I CHECK IF ITS THE BATTERY?

It's a USB mouse. There is no battery. Plug it in. It's very old, so it may no longer work.

How to install usb-9162 for diadem

Hi all,
I want to install a Hi-Speed USB Carrier "NI USB-9162" with a NI 9215A for Diadem.
I did this:
Install the software from CD (driver and max...)
Plug in the hardware in USB (Hardware found)
Reinstall / Update my Diadem 9.1 to 9.1 sp2c
Configure the hardware in "Measurement & Automation" v4.0.0.3010
I see my device in devices.
I created a voltage-task with 4 channels, continous, 1kHz
I started Diadem - DAC and thought, that I could use the icon for NI-DAQ Input, but a doubleclick shows an error.
see Attachment
I think, I forgot anything - perhaps a dll...!?
I couldn't find any help for this hardware for using in diadem on CD.
greets Andreas
Volkswagen AG
Wolfsburg - Germany
Attachments:
error.gif ‏17 KB

Thx again Johannes,
I downloaded and installed it. But under devices in MAx there is only the mx-device. (see Attachment: Max3.gif).
I tried to create a new traditional device but there I couldn't find my device (see Attachment: Max4.gif).
I started DIAdem and clicked to the icon - no error message, but the Max-signal-list is empty.
I added a channel in that list and started my DAC. But then there comes an error-message that this signal isn't defined in Max.
So where can I do that and how?
greets Andreas
Volkswagen AG
Wolfsburg - Germany
Attachments:
max3.gif ‏109 KB
max4.gif ‏39 KB

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

How to install USB card in Mac OS 8.6?

Recently, i buy a new printer. the printer only can use USB connection. My MAC is MAC 8500/1800. It is no USB port. i added a USB card. But it is not work. I find information on internet. It need installed a software(USBSupport1.4.1smi.bin). I downloaded the software. But it can not open. i hope some people can help to solve the problem.
Thank you very much for your help.

Hello tytom2003,
Welcome, and Happy New Year!
First, make sure your printer and USB card are Mac compatible.
Second, you will probably have to re-install your Operating System in order for your Mac to "see" your USB card. You cannot install the proper USB and USB support extensions by downloading them, because your Operating System will not "see" them, will not recognise them.
You should perform a "clean reinstall" (also known as "archive and install") from your original installation CD - or from a retail, full install CD, with the USB card installed in its PCI slot. Your Mac will now automatically "see" or recognise the USB card, and will see the need to install the USB extensions.
By doing a "clean install", you will have a newly installed System Folder and the old, disabled 'Previous System Folder' next to it. You will not lose anything, as all your old applications and documents will be saved in the 'Previous System Folder' where you may retrieve them and drag them over to your new System Folder.
I assume you are running OS 8.6, but it doesn't really matter. The OS CD will install the correct USB extensions. (An OS9 CD might install 1.4.6 extensions - whatever it installs should work).
I did not have your exact model, but rather a 7300 and several beige G3s, but the procedure is all the same.
It is also possible to do a 'Custom Install' or install by 'Tome Viewer' utility.
Let us know if it works.
I hope to have been of some help. It will have been an honour.
Jon
Message was edited by: Jon Smith

How to install USB-RS232 connector

I want communicate zebra printer with USB-RS232 cable, somebody say, if i install the USB-RS232 connectly, it will appear virtual serial port in MAX, is it right? do i need to download NI-Serial driver?

:-) congradulations

How to install usb driver 2.0 on the p45 neo3 mother board?

ok my promblem is that some how there are no usb drive for window xp 64 ? so how do be able to use my flash driver or game controller.....DOES ANYONE KNOW HOW TO FIX THIS?
system spec:
window xp 64 bit
board: intel p45 neo3
cpu: core duo e7200
video : nvidia geforce 8600gt
plzzz help....

i check the bios the usb port are all enable
here are my system spec:
System Information
Time of this report: 8/16/2008, 02:41:56
Machine name: TIQUILA
Operating System: Windows XP Professional x64 Edition (5.2, Build 3790) Service Pack 2 (3790.srv03_sp2_gdr.070321-2337)
Language: English (Regional Setting: English)
System Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
System Model: MS-7514
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) III Xeon processor (2 CPUs), ~2.5GHz
Memory: 2048MB RAM
Page File: 486MB used, 3480MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.3790.3959 32bit Unicode

MOVED: how to install usb driver 2.0 on the p45 neo3 mother board?

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=119216.0

i check the bios the usb port are all enable
here are my system spec:
System Information
Time of this report: 8/16/2008, 02:41:56
Machine name: TIQUILA
Operating System: Windows XP Professional x64 Edition (5.2, Build 3790) Service Pack 2 (3790.srv03_sp2_gdr.070321-2337)
Language: English (Regional Setting: English)
System Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
System Model: MS-7514
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) III Xeon processor (2 CPUs), ~2.5GHz
Memory: 2048MB RAM
Page File: 486MB used, 3480MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.3790.3959 32bit Unicode

How to install this update and solve USB and touchpad issues?

I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Need instructions on how to install mouse

My friend gave me a Logitech wireless mouse Model M310 but with no set up instructions or the Nano USB. Need instructions on how to install mouse, please. Thank you.

Hello Sara.
Please refer to this link for information about your Logitech wireless mouse Model M310.
Advice offered in good faith. It is your decision to implement same. Wanikiya and Dyami - Team ZigZag

No USB mouse or keyboard installing Win7

No mouse or keyboard when installing Windows 7 Pro in new K450e.
PC boots to Win7Pro media.
No USB mouse. Lazer light not on.
USB keyboard not responsive.
BIOS set to Legacy.
Found no mouse /keyboard setting in BIOS.
USB enabled in BIOS.
What is the issue?
hime

After installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to install USB mouse?

Similar Messages

Maybe you are looking for