How to Internet sharing from AirPort throuhg Ethernet

Hi! How to Internet sharing from AirPort throuhg Ethernet?
In System Preferences -> Sharing -> Services not found checkbox for Bluetooth Share Internet
Internet is connected via airport
Mac os x 10.4.11 Server
Thanks!
Message was edited by: andrew_k

I've not set up a Bluetooth PAN; a Personal Area Network. Modems and keyboards and such, yes.
My usual approach here would be a WiFi USB widget, or an embedded WiFi card or a PCMCIA / PC Card or a CardBus WiFi or wired network adapter, or a wired Ethernet connection for the Windows Vista laptop.
This to connect from the Windows Vista laptop to the AirPort, or into a wireline Ethernet (if there is one). And from there to the Mac Mini server running Mac OS X or Mac OS X Server software.
As for the PAN, I don't know. I don't have Mac OS X Server running on a box with Bluetooth hardware, either.

Similar Messages

  • My computer keeps switching its internet setting from Airport to Ethernet without me doing anything. How can I fix this??

    My computer keeps switching its internet type from "Airport" to  "Ethernet." As my computer is not connected to an Ethernet cable, the ethernet does not work, and so I lose internet connection every time it does this. And it does this two or three times a minute (no exaggeration). This means that, by the time I've changed the setting and refreshed my page, the internet type has changed again, and I'm back to square one.
    So far, I've tried the following:
    -Reordering the list of priorities on the "Network Preferences" page
    -Going to the Ethernet "advanced" options and switching everything to either "off" or from "automatically" to "manually"
    -Rendering the Ethernet inactive
    -Finally, I created a new location with only airport on
    Usually, doing these things makes the problem go away for a day or two, and then it just comes back again.
    It's not a problem with the internet itself, as this has been an ongoing issue for the past few months, and I've switched locations three times since then.
    Does anyone know how to make my computer stay on Airport, and NOT switch to the Ethernet setting all the time?

    Hi samanthaspunt,
    I would first try these steps:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not help, I would try un-syncing and resyncing the music via this article:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Cheers!
    - Ari

  • Internet sharing from Wifi to Ethernet is not working after Mountain Lion upgrade

    First I was having trouble just connecting these two, now I can't get the Internet sharing to work. Here's what I am trying to do: I want to share my Macbook Pro's internet connection from it's Wifi to another laptop I have connected via ethernet cable. They will ping each other now. The problem now is that the laptop won't pick up the Internet connection from the Macbook Pro, even though I have it configured exactly as I had in Snow Leopard. Nothing has changed on the laptop from before when it worked fine with Snow Leopard. But now that I updated to Mountain Lion, Internet sharing no longer works no matter what I try. I've been trying to find a solution by to no avail. Could anyone here offering some advice or a solution that will fix my problem? I've been over the basic steps over and over again, so please don't ask me to do something stupid like reboot or check the Sharing settings. They're exactly how they are meant to be, but the thing just won't work.

    tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
    listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes
    17:04:42.617423 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1035, length 64
    17:04:43.617545 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1036, length 64
    17:04:44.617468 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1037, length 64
    17:04:45.617274 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1038, length 64
    17:04:46.617402 IP 192.168.6.3 > 8.8.8.8: ICMP echo request, id 12095, seq 1039, length 64
    Ran a TCPdump on my Macbook Pro. It is recieving the ping requests, but the laptop still isn't getting replies to its pings. So something is wrong in the Macbook's configuration somewhere. I don't know where, though.

  • Internet sharing from Ethernet to Airport Wi-Fi (how to turn off broadcast)

    I'm using "Internet Sharing" from Preferences / Sharing / Internet Sharing, to share my connection from Ethernet to "computers using" Airport. I'm wondering if there's a way to turn off broadcasting of the wireless name.

    Just found this old thread asking the same question, though the question itself was never answered within it.
    http://discussions.apple.com/thread.jspa?threadID=1231413&start=15&tstart=0
    Is it technically possible to turn off the SSID broadcasting when using Internet Sharing in OS X?

  • Can I connect a PS3 wirelessly using internet sharing from my ethernet-wired iMac. It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

    Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac?  It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

    Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac?  It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

  • Problem in Internet Sharing from Ethernet to wifi

    Whenever i go to Preferences > Sharing >  Click Internet Sharing > From Ethernet > to wifi and hit start. It actually creates my wifi access point but the problem is that i lose my internet connection from both, my mac from which the connection is being shared and my cellphone which is connected to it. I can not identify what is the problem, but i have tried it many times with or without the WPA2 personal key. Even after stopping the internet sharing, i have to plug out and then in my ethernet cable in order to connect to internet.
    This problem was also on OS X mavericks with me last year, but it resolved automatically, i don't know how. But since when i have upgraded to yosemite, i can't make my hotspot connection working . Suggest any quick and effective way please.

    Same problem over here...
    Additionally: if I unplug Gigabit-Ethernet-Adapter and plug it in again while Internet Sharing is still activated, the internet via ethernet works, but breaks down again about a minute later...

  • How to setup Internet Sharing from new MacBook Pro to iMac G4?

    Hey everyone,
    I have a new 2011 MacBook Pro running Snow Leopard (10.6.7) and an iMac G4 running Panther (10.3.9).
    The iMac doesn't have an AirPort card and the easiest way to get internet on it seems to be Internet Sharing.
    I want to setup Internet Sharing from the MBP's Airport via ethernet to the iMac's ethernet, but am having trouble configuring the IP addresses etc to get the iMac to comply.
    Your help and advice is much appreciated

    Open System Preferences > Sharing > Internet Sharing, and set it up as you want. Read > http://support.apple.com/kb/PH10740

  • How to prevent internet sharing from turning itself of automatically

    There is any way to prevent internet sharing from turning of itself automatically wen the analog modem is disconnected?
    At home i have to use an analog modem to connect to the internet (no adsl coverage), under Snow Leopard i was able to create a wi-fi Network to share files and connection between an iMac (connected directly to the internet), an iPhone, a MacBook and a Ps3.
    With lion, apple introduced a new feature in the internet sharing tools: in fact the wi-fi connection is turned ON only when the modem (or the selected internet source whatever it is) is connected to the internet, when i disconnect it all the network is turned Of.
    So, there is any way to keep alive the network also when the modem is disconnected, like when i was under Snow Leopard?
    tanks in advice or the help and sorry for my terrible english

    hello, can you please try it with firefox 33 beta. it should no longer interpret a one word entry into the address bar as a domain, that it tries to resolve first, but sends it as a search term to your chosen engine right away: https://www.mozilla.org/firefox/channel/#beta
    http://msujaws.wordpress.com/2014/08/01/faster-and-snappier-searches-now-in-firefox-aurora/

  • Internet Sharing from Macbook Pro to iPad???

    Trying to get my wife's iPad to connect to the internet in a hotel that has wired high speed internet but no wifi.
    My MacBook Pro connects just fine. So I turned on Internet Sharing for both Bluetooth and wifi (with WEP password for wifi).
    The iPad connects to the Mac by wifi but says it has no internet connection.
    With Bluetooth, it pairs OK. The Mac sets it up as serial port sharing (no other choice offered, but within that there is a choice of modem or RS232 protocol). But when I try to connect it connects momentarily then disconnects right away.
    Any suggestions on how to let the iPad get at the internet in this situation?

    I am still not succeeding.
    I just upgraded to a new Macbook Pro with Mountain Lion. Testing at home, where there are no issues around hotel ISP limitations and I feel pretty safe originating an open wifi network for a few minutes.
    Set up Internet Sharing from Ethernet to Wifi. Used the Create Network option for wifi in the menu bar to set up an open unprotected wifi network whose name is the name of my Mac. I can choose any wifi channel from 1 to 11; it makes no difference.
    I can see that network from my wife's iPad, and can connect to it no problem. But as in all similar tests since Snow Leopard came out, Safari in the iPad can't open any web sites; it says it is not connected to the internet. I can also connect to the MBP wifi from my iPhone, but if I select it, the 3G symbol still shows at the top of the screen because the phone cannot find an internet connection over that wifi.
    Clearly some other people are managing to do what I cannot. Quite possibly some piece of third party software on my Mac is interfering. Little Snitch, for example, though it is currently turned off.

  • Messages not working while using Internet sharing from my iMac ... Any troubleshooting tips/approaches ?

    I am connecting to the internet using the Internet Sharing from my iMac ...
    The trouble is the messages in the Messages app are not sent when I am connected through my iMac ... When I key in a message and hit send a progress bar appears fills up till 90% and just gets stuck there and after a while the red exclamation mark stating the message was not sent appears ... Now if I connect through my wi-fi router or thether through my phone it works fine ... I can send / recieve messages ...
    Similar points to note - Today when I tried to make an App Purchase - The security info screen ( new additon - http://isource.com/2012/04/11/iphone-app-store-security-info-alert/ ) popped up but I got a blank screen for the securtiy questions screen ... It was not loading the screen ... Some games the game center invite does not work through my Internet sharing (tried in MetalStorm) ... but works fine thorough wi-fi or thether ...
    What could be the problem with my iMac s sharing? Any suggestions would be really useful ///  Thanx in advance
    I am running Lion ... and I have updated to the latest Airport software ...
    Only thing I tried was changing the DNS ... but that s not related right ?

    Powerline adapters use your home powerlines (mains a/c) to connect your devices via ethernet to your modem, they're easy to set up and the they TOTALLY fixed my ATV problem, the problem seems to be with the wireless. I've been trawling through apple discussions, and did found a workaround to my problem https://discussions.apple.com/thread/4222883?start=0&tstart=0
    but its just a workaround :/

  • I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    It depends upon how the other machines are connecting to your MBA:
    If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
    If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them

  • Connecting my Powerbook to my iMac for internet sharing via airport

    Thanks in advance for any help.
    I have given up trying to get an answer to my Airport problem and NTL Virgin.
    I now have my iMac connected to web via ethernet all okay for a week now so it can't be my connection that was the problem.
    I need to connect my PowerBook to the internet now at the same time. I would obviously like to do this using wireless technology. I was hoping to web share my iMacs connection via the airport cards on both macs but seem to be struggling.
    I can set up a new network on the iMac and get the PowerBook to see it but it won't connect to the internet.
    Any advice would be great thanks

    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Internet Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > PowerBook
    Enable Software Firewall - iMac
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing - iMac
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • Turning on Internet Sharing via Airport disrupts internet connection!

    I have a very strange problem.
    My iMac G5 (10.4.10) is connected to broadband via an Ethernet cable. Everything works perfectly, Google Earth works, emails come through, internet downloads are perfect...
    BUT!!
    When I turn on my Internet Sharing to share my Ethernet connection via my Airport connection (to let my husband surf the net on his PC) all **** breaks loose on my Mac.
    Google Earth does not function properly, all internet downloads (.dmg) come up with "codec overrun errors", all images sent via email downloaded through Entourage are corrupted, the list is endless. I have to turn off my Internet Sharing, turn off Airport, and then everything returns to normal again.
    Why is this, and can someone help stop the fights my Husband and I are having when it comes to sharing the Broadband connection through my Mac - I don't want to because my Mac goes crazy!
    Ta muchly!!!

    Sorry but an Ethernet hub will NOT properly share the ISP connection. The ISP only gives you a single IP address. If you use a hub (or Ethernet switch), the first computer you turn on will win and get the only IP address. The other computer will not be able to connect.
    To properly share the connection, you need to get a router. The router uses the single public IP address provided by your ISP and creates multiple local IP addresses for your computers.

  • How to internet browsing from the wifi.....not from my service provider.

    i want to know how to internet browsing from the wifi connection not from the "DATA SERVICE" when i off my data service from mobile network option then i can't able to surf.........my wifi connection is on and connected.
    Thanks guys.... 

    Do not turn off the Data Services. Just turn off your mobile network connection in the Manage Connections screen.
    Go to Options > Advanced > Browser and set your browser to Hotspot, and save. Now, use the browser with the Wifi connection for surfing the internet.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Internet sharing via airport doesn´t work

    Hello to everybody,
    my problem is, when I do internet sharing via Airport on my imac (OSX 10.6.8) so I can use my ipad for surfing. The connection establishes for a short time and then it breaks down. Once in a while I can reconnect, but it´s constantly breaking.
    I know, this problem is posted a million times, but it still seems not to be solved (or I didn´t find the right thread with the solution).
    Bthw. I phoned the apple support. They wanted to charge € 49,--. Now I´m quite mad at apple. This *****. They are having a problem with their software and they want to charge me? That´s incredible. I can´t understand what´s the hype about apple. Such an awfull bad support they´re giving (or not giving at all).

    OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

Maybe you are looking for

  • App-V 4.6 Content Paths

    Hi I have a question about App-V content paths using the 4.6 SP2 native infrastructure. From the App-V Management Console we have to configure the Default Content Path, then for each individual application we can configure OSD and icon paths. Additio

  • N95 music player and working with sub folders

    Hi, I use file transfer to move my music from PC to N95 and use folders and sub folders within the music folder.  I cannot see the folders when using the music player.  I need advise how I can transfer my music easily so that I can play music files t

  • X-Fi Extreme Music Not Detected At All By New

    I have just finished building a new PC with parts obtained from a friend, but the X-Fi that worked fine in my previous computer is now totally undetected. There is even no trace of it in the DMI data when the computer turns on - no 'Multimedia Contro

  • What's wrong with STP Normalize?

    Using STP to rough out some multi-tracks. After mix and export a songfile, playback is as some tracks are missing. Go back to look at the project and tracks appear to be still "normalizing" even though they had completed earlier. I wait until they co

  • Why has my cursor become very laggy?

    Hi, For some reason my cursor has become very laggy since getting Delayed Write error messages causing my system to screw-up. I finally reinstalled a new Windows on drive D, my old (not working) Windows is in drive C. Now when I scroll pages on the n