Connecting my Powerbook to my iMac for internet sharing via airport

Thanks in advance for any help.
I have given up trying to get an answer to my Airport problem and NTL Virgin.
I now have my iMac connected to web via ethernet all okay for a week now so it can't be my connection that was the problem.
I need to connect my PowerBook to the internet now at the same time. I would obviously like to do this using wireless technology. I was hoping to web share my iMacs connection via the airport cards on both macs but seem to be struggling.
I can set up a new network on the iMac and get the PowerBook to see it but it won't connect to the internet.
Any advice would be great thanks

To setup for Internet Sharing (Wired to Wireless):
Setup the Network
Internet Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > PowerBook
Enable Software Firewall - iMac
System Preferences > Security > Firewall
o Block all incoming connections (enabled)
Enable Internet Sharing - iMac
System Preferences > Sharing
o Select "Internet Sharing" from the options in the left column
o Share your connection from: Built-in Ethernet
o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
AirPort Options...
o Network Name: <anything you want>
o Channel: Automatic
o Enable encryption (using WEP) (optional)
o Password: (optional)
o Confirm Password: (optional)
o WEP Key Length: (optional)
o Click OK
o Select "Internet Sharing" again
o Click "Start" to start Internet Sharing
o Click Start

Similar Messages

  • Internet sharing via airport doesn´t work

    Hello to everybody,
    my problem is, when I do internet sharing via Airport on my imac (OSX 10.6.8) so I can use my ipad for surfing. The connection establishes for a short time and then it breaks down. Once in a while I can reconnect, but it´s constantly breaking.
    I know, this problem is posted a million times, but it still seems not to be solved (or I didn´t find the right thread with the solution).
    Bthw. I phoned the apple support. They wanted to charge € 49,--. Now I´m quite mad at apple. This *****. They are having a problem with their software and they want to charge me? That´s incredible. I can´t understand what´s the hype about apple. Such an awfull bad support they´re giving (or not giving at all).

    OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

  • IPhone 3Gs, Mac Pro Internet sharing via Airport connection problems

    Hi, I have internet sharing turned on in my Mac Pro for the Airport connection and it works very well with laptops, but I have trouble getting my iphone 3gs to connect to it sometimes.
    restarting the iphones does not help
    stopping and starting the airport does not help
    I can restart the Mac Pro, but that can be a pain, but does usually allow be to connect again for awhile...

    I've been having the same problems as everyone else here. Trying to share internet connection from my ethernet wired iMac to my MacBook and my iPhone. Tried all the workarounds, but nothing works, or lasts very long.
    Yesterday, I finally talked with AppleCare for over an hour. All their suggestions (trashing preferences, changing settings, etc.) failed, as well. The AppleCare person then put me on hold to speak to an engineer, who told her that Snow Leopard no longer supports Internet Sharing as of 10.6.1.
    Not willing to accept that answer, I had them set up an appointment at the Apple Store Genius Bar for me, and after chatting with the Genius for a while, he also confirmed that Internet Sharing is no longer supported under Snow Leopard. Apparently, there were many hardware issues that the engineers decided to circumvent, and so did not include support for Internet Sharing with the internal airport in Macs. They said that the Airport it is intended to receive, not to send a signals! Yet, it worked fine, doing just that, under Tiger and Leopard! The only fix he could offer was to wipe my drive and take me back to 10.5, which I declined.
    However both the guy at the Genius Bar and the lady at AppleCare inferred that Apple "may" release another update to fix this issue, if they get enough complaints and bug reports.
    So, there you have it. Apple no longer officially supports Internet Sharing in Snow Leopard.

  • Turning on Internet Sharing via Airport disrupts internet connection!

    I have a very strange problem.
    My iMac G5 (10.4.10) is connected to broadband via an Ethernet cable. Everything works perfectly, Google Earth works, emails come through, internet downloads are perfect...
    BUT!!
    When I turn on my Internet Sharing to share my Ethernet connection via my Airport connection (to let my husband surf the net on his PC) all **** breaks loose on my Mac.
    Google Earth does not function properly, all internet downloads (.dmg) come up with "codec overrun errors", all images sent via email downloaded through Entourage are corrupted, the list is endless. I have to turn off my Internet Sharing, turn off Airport, and then everything returns to normal again.
    Why is this, and can someone help stop the fights my Husband and I are having when it comes to sharing the Broadband connection through my Mac - I don't want to because my Mac goes crazy!
    Ta muchly!!!

    Sorry but an Ethernet hub will NOT properly share the ISP connection. The ISP only gives you a single IP address. If you use a hub (or Ethernet switch), the first computer you turn on will win and get the only IP address. The other computer will not be able to connect.
    To properly share the connection, you need to get a router. The router uses the single public IP address provided by your ISP and creates multiple local IP addresses for your computers.

  • Can't do Internet Sharing via Airport, laptop PC to iMac

    Help! I'm trying to connect a Windows laptop to my Mac via AirPort to do Internet Sharing. I have Internet Sharing turned on and AirPort is on.
    The laptop PC can see the Mac, but it has a red X and the following message:
    "The settings saved on this computer for the network do not match the requirements of the network."

    I'm finding, after working at it for a while, that "Frank's Computer" shows up as an ad hoc network on the laptop PC and the wireless connection is solid, but Internet Sharing still isn't working. Is there a distinction between ad hoc networks and Internet Sharing? Could it not be working because an ad hoc setting has been made and Airport can't do two things at once?

  • Internet sharing via airport woes

    Hi,
    apparantly an thunderstorm fried my ethernet-card in my MBP this morning. Now I am struggling to get internet-access via my iBook G3 which has DSL-boradband via ethernet (pPOE) (either via firewire or airport) but don't succeed:
    1) file-sharing eithert via airport or ip over firewire works
    2) I have set up my iBook to share internet via airport, enabled web sharing as HELP recommends.
    Internet sharing nevertheless doesn't work for me: error message (in network-status) says (translated from German):
    …Airport has self-assigned IP-Address and is maybe not able to connect to the internet.
    I have used the built in settings, changed nithing manually. Any ideas?
    Greetings,
    Rolf
    (rather desperate)
    MBP C2D 2.33 GH, 160GB HD, 2GB Ram   Mac OS X (10.4.9)  
    MBP C2D 2.33 GH, 160GB HD, 2GB Ram   Mac OS X (10.4.9)  

    OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

  • Internet shared via Airport Express - Speed control

    Good morning all,
    I am using an AirPort Express base station to share my internet connection between two computers. I have a cable modem connected to the AirPort Express, and both my iMac and my brother's PC connect wirelessly to the AirPort Express base station.
    Now the problem is that the PC is using extensively the bandwidth, whereas the Mac cannot hardly browse the web. As I do not need a fast connection to the Mac all the time, but only in specific occasions, I would like to be able to control how much of the internet bandwith is used by each of the computers connected to the Airport Express base station.
    I have checked the manual setup in the AirPort utility, but I cannot find this setting.
    Does this exist? Can it be done?
    (I know I can ban a specific computer from connecting to the network, but this is not what I want).
    Thank you in advance for your help and assistance.

    This feature is NOT available on any of Apple's base stations.

  • Wpa not available for internet sharing

    Hiya,
    Just want to verify:
    WPA is not available for internet sharing over airport card?
    All that is available is old insecure WEP. Updated to airport 4.2, but the config utilities only apply to base station / express. So, if sharing a connection over airport card then we're stuck with the 'laughable' security of WEP.
    This is true?
    Why? Is it impossible to add WPA for sharing?
    Please confirm if anyone knows...
    thanks!
    12 powerbook g4   Mac OS X (10.3.9)  

    Problem is solved, although I do not really know why:
    My parent's email address is [email protected] since years. In my address book I have both addresses: [email protected] and [email protected]
    Somehow their FaceTime used their mac.com address and after we changed that to [email protected] everything is fine now, I can reach them via FaceTime.
    I hope this helps somebody.

  • XP can't connect to iMac-based AirPort for Internet Sharing

    (I apologize if there's already an answer to my issue out there somewhere; I promise that I searched for it before posting)
    Hello!
    I have an iMac running Tiger (and connected to the internet via ethernet -> cable modem), and I want to use it as a hub for encrypted Internet Sharing. I have two other machines, an older iMac and a WinXP laptop. As you might expect, I have no problem whatsoever setting up the network and getting the old iMac to see it, connect, and so on. The XP machine can see the network, and, when encryption is off, can connect to it, but I really want to run encryption.
    I'm sure I'm not the first person to run into this problem, and I have found a couple of websites that discuss it -- however, I can't seem to make it work. Does anyone out there in forum land know of a step-by-step tutorial that would cover setting up encrypted Internet Sharing (over AirPort) on an iMac so that another iMac and an XP machine can connect? Any guidance you can offer would be most welcome.
    Thanks in advance,
    Dieter

    Just to give a bit of an update, I chatted with Apple support, and in essence they told me that I had to take this up with the manufacturer of my XP laptop's wireless card -- understandable, given that my old iMac works just fine on the network (so the problem really isn't on the Mac end of things).
    I tried using the information at http://www.macosxhints.com/article.php?story=20030803030354585, but no dice, unfortunately; maybe that will work for someone else, however.
    I also found out something new -- I thought my XP laptop could connect to my AirPort network when encryption was off, but I was wrong. Instead, it just says "trying to connect," but nothing ever happens. But I CAN use the XP box to connect to other wireless networks in the neighborhood (shh, don't tell). So it looks like there's a deeper issue.
    Please -- I know that someone out there has an answer; I really need to be able to make this work.
    Thanks again,
    Dieter
    iMac dual core Mac OS X (10.4.5)

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • Configure DHCP Server options for Internet Sharing?

    Good morning, all.
    I have a Sprint (Sierra 595U) AirCard internet connection, which I'm sharing over my AirPort (using OS X's built-in Internet Sharing) to several Windows clients in my office. I see that when Sharing is enabled, en1 takes on the address 10.0.2.1 by default, as well as the role of default gateway/router and DHCP server for the Windows clients.
    My question is: Can I configure the IP addresses and DHCP options for Internet Sharing to another address/mask scheme?
    Just like I changed my home wireless network away from the default 192.168.1.0/24 for security reasons, I'd like to do the same here.
    Thanks and Regards,
    BrooklynWalker

    Some paranoia is good.
    Yes, of course security paranoia can be cultured. like yogurt
    I googled.
    This might help:
    http://www.aleph0.com/computing/macosx/dhcp-setup/
    but from what I just read, changing away from the default net & mask might be putzy.Some other discussions for you:
    http://www.macosxhints.com/article.php?story=20050331194834746
    or you might see something here that helps.
    Sorry not to be more specific. Hard to tell if you already googled for yourself.
    I'll let someone smarter than I am take a look for you, here.

  • Connect to internet sharing via nintendo ds

    So I am trying to connect a nintendo DS to my macs internet sharing twhich is coming from ethernet and being shared to computers using wi-fi
    I found these online and followed the steps
    Turn on Internet Sharing:
    Go to System Preferences, click on the Sharing icon, then click on the Internet tab.
    Change the Share your connection from: pop-up to 'Built-in Ethernet.'
    Under the To computers using section, check the AirPort box.
    Click Airport options...Enter an easy name such as nds. Leave all the security options blank -- implementing security is an exercise left to the reader -- then click OK.
    Click Start in the Internet Sharing panel.
    For sharing internet access with other computers, this is usually sufficient. However, the DS doesn't play well with the built-in DHCP server, so we have to manually configure the DS. To do this we, must gather some info...
    Gather Information:
    Open Terminal.app and type ifconfig en1. In the output...
    Look for: inet xxx.xxx.xxx.xxx netmask ...
    Take note the IP Address (the x's) associated with the first inet (mine was 10.0.2.1; yours may be different).
    Type dig. Near the bottom of this output will be SERVER: followed by an IP address. This will be the DNS server you will use for your DS.
    Configure the DS:
    Edit your Nintendo Wi-Fi Connection Settings from within a compatible game.
    Select a connection to edit.
    Choose Manual Setup.
    Enter the following parameters:
    SSID: nds (or whatever you chose in step one)
    Auto-obtain IP Address: No
    IP Address: Take the first IP Address you obtained earlier, and make the last digit bigger. i.e., mine could be 10.0.2.4
    Subnet mask: 255.255.255.0
    Gateway: The first IP Address, unchanged. (e.g. 10.0.2.1)
    Auto-obtain DNS: No
    Primary DNS: your DNS SERVER from the earlier dig output.
    Test your connection at the top of the screen. You should have no problem connecting.
    That's it, now just have fun!
    I followed them exactly and when typing in ifconfig en1 I get this:
    Router:~ connorwillimas$ ifconfig en1
    en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
      ether 7c:d1:c3:6b:bc:38
      inet 10.2.31.28 netmask 0xfffff000 broadcast 10.2.31.255
      media: autoselect
      status: active
    then I typed dig ad got this:
    ; <<>> DiG 9.8.5-P1 <<>>
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 50348
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 8
    ;; QUESTION SECTION:
    ;. IN NS
    ;; ANSWER SECTION:
    . 26589 IN NS e.root-servers.net.
    . 26589 IN NS b.root-servers.net.
    . 26589 IN NS j.root-servers.net.
    . 26589 IN NS a.root-servers.net.
    . 26589 IN NS g.root-servers.net.
    . 26589 IN NS l.root-servers.net.
    . 26589 IN NS f.root-servers.net.
    . 26589 IN NS m.root-servers.net.
    . 26589 IN NS i.root-servers.net.
    . 26589 IN NS c.root-servers.net.
    . 26589 IN NS h.root-servers.net.
    . 26589 IN NS k.root-servers.net.
    . 26589 IN NS d.root-servers.net.
    ;; ADDITIONAL SECTION:
    e.root-servers.net. 86400 IN A 192.203.230.10
    a.root-servers.net. 54665 IN A 198.41.0.4
    m.root-servers.net. 82738 IN A 202.12.27.33
    i.root-servers.net. 83172 IN A 192.36.148.17
    c.root-servers.net. 83415 IN A 192.33.4.12
    h.root-servers.net. 84419 IN A 128.63.2.53
    k.root-servers.net. 85418 IN A 193.0.14.129
    d.root-servers.net. 85582 IN A 199.7.91.13
    ;; Query time: 21 msec
    ;; SERVER: 10.0.0.3#53(10.0.0.3)
    ;; WHEN: Sat Oct 19 20:41:19 EDT 2013
    ;; MSG SIZE  rcvd: 369
    I entered all the information correctly into my DS and then I get error code 51300 and when the ds says testing connection there is no signal strength in the top right corner but when i found the connection using the find an access point it shows that there is full signal strength. How can i get the DS to realze there is a signal strength when i do this manually or automatically?

    The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

  • Screen-Sharing and Internet-Sharing via same network connection

    Hello out there,
    I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
    Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
    Can somebody tell me what's going wrong and how to solve it?
    Greetings from good old Germany
    Ansgar

    Hello out there,
    I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
    Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
    Can somebody tell me what's going wrong and how to solve it?
    Greetings from good old Germany
    Ansgar

  • Internet sharing via dongle, how to set password for wifi network created?

    I am using a USB dongle with my Mac book Pro to share internet through AirPort, so that i can access my mac book's wifi from my iphone. This works great, but it is an open network and I woud like to set up a password.
    If anyone can point me in the direction I would be very grateful!
    Thanks

    If you are using OS X's Internet Sharing feature, then you can configure wireless security on your Mac's internal AirPort Card but are limited by the OS X version that you are using. It was not until Mountain Lion that Apple provided WPA2 security. Prior to this only WEP was available.
    You configure Internet Sharing via System Preferences > Sharing > Internet Sharing. (I don't have 10.6.x on any of my Macs so this may be different for your case.) Once you configure what is shared, you can then add wireless encryption.

  • Internet Sharing via Firewire

    I am trying to use my Intel iMac (10.5.7) as a gateway computer and connect my eMac (10.4.11) to it via Firewire to access the internet. (My router is faulty) I am able to share files successfully between both computers using the Firewire cable, but I cannot get the eMac to access the internet from the iMac. I have the iMac set up for sharing but the eMac cannot access the internet this way. I have followed the steps described in the Missing Manual but the Network page on the eMac doesn't allow me to click "Apply Now" because the button is grayed out. I suspect some of the boxes need some information entered, but I don't know what.
    Any suggestions gratefully received.
    Robin.

    Noah,
    Well, yes, replacing the router is the obvious solution. I had stopped using the suspect router to see if it was the cause of my connection dropouts. While I was conducting this experiment I thought I would try out the Firewire connection for Internet sharing, just for fun. Since I have had a trouble free connection since I removed the router I think I have isolated the cause of the problem.
    What has puzzled me is why did internet sharing work with the eMac as the gateway computer, but not the other way around with the iMac as the gateway computer. Anyway, it is rather academic as I will probably replace the router, if Netgear cannot suggest a trouble free configuration.
    Thanks for your reply.
    Robin.

Maybe you are looking for