How to invoke the sql lodaer?

hi,
i have installed oracle 10g and the loader should have been installed by default as i have been told. Can you tell me how to invoke the loader?. I tried sqlldr in the sql> prompt but receive a "command not known" error.
thx

Hi,
If you set ORACLE_HOME enviroment variables, then just typing command sqlldr should work.
http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm#BABDGCHH
Br, Jari

Similar Messages

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"?
I have an install SQL scripts that creates a Linked Server. I want to put some security on the Linked Server and only grant the Agent Job Signon (the "Run As" or "Executed as User") access to the linked server. I need to retrieve the
Agent Job Signon (something like "NT SERVICE\SQLAgent$FIDEV360BI02").
I could query certain jobs and SUBSTRING the Message column - using some form of the query below, which would return "Executed as user: NT SERVICE\SQLAgent$SSDEVBI02. The step succeeded." But that is pretty imprecise.
use msdb
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration,
[Retries] = HIST.retries_attempted
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
-- CHANGE THIS
-- WHERE JOB.name like '%GroupMaster%' or Job.name like '%etlv%'
ORDER BY HIST.run_date, HIST.run_time

by default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!!

How to invoke the FTP rename operation?

Does anybody know whether it is possible and how to invoke the 'rename' operation from the FTP Adapter (using ESB)?
Thanks in advance,
Jeroen van Schaijk

Hi,
Please use the below code for your Web Service Call
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:cus="urn:crmondemand/ws/odesabs/customrecordtype/" xmlns:data="urn:/crmondemand/xml/customrecordtype/data">
<SOAP-ENV:Header>
          <wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/07/secext">
               <wsse:UsernameToken>
                    <wsse:Username> USERNAME </wsse:Username>
                    <wsse:Password> PASSWORD </wsse:Password>
               </wsse:UsernameToken>
          </wsse:Security>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<cus:CustomRecordTypeUpsert_Input>
<data:CustomRecordType>

<data:Name>myname</data:Name>

<data:SingularName>myname</data:SingularName>

<data:PluralName>myname</data:PluralName>

<data:ShortName>myname</data:ShortName>

<data:IconName>myname</data:IconName>
<data:ListOfCustomRecordTypeTranslations>

<data:CustomRecordTypeTranslation>

<data:LanguageCode>?</data:LanguageCode>
<data:SingularName>?</data:SingularName>
<data:PluralName>?</data:PluralName>
<data:ShortName>?</data:ShortName>
</data:CustomRecordTypeTranslation>
</data:ListOfCustomRecordTypeTranslations>
</data:CustomRecordType>
</cus:CustomRecordTypeUpsert_Input>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Hope that helps!
Thanks & Regards
Sablok Kumar

How to identify the SQLs which are using the tables and new columns

Hi
I m using oracle 10G Database in windows. Developers have added some columns in some of the database tables and were asking to check whether there is some impact on performance or not. I have not done this performance tuning before. Kindly help me how to proceed further.
How to obtain the sqls which are touching the tables and the new columns? It would be really great if you can help me with this.
Thanks

You can try to use DBA_DEPENDENCIES to get PL/SQL objects using tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_1041.htm#i1576452.
However if SQL code is not stored in database in a trigger, a procedure, a function, a package or a view, it is impossible to retrieve all SQL code referencing some table from database dictionary: for this you would have to analyze application source code.

How to put the SQL-statement returned value into the field (as a default)

Hi,
I am using Developer/2000 (Forms Designer) under windows 98.
Please tell me how to put the SQL-statement value (as a default value) into the field before enter-query mode. Noted that I have tried the following ways but still some problems:-
1) Place the SQL-statement into PRE_QUERY trigger in the form/block level.
There is a message box which ask 'Do you want to save the changes?'.
2) Place the SQL-statement before execute enter_query. There is still a
message box which ask 'Do you want to save the changes?'.
Any hints? Thanks. Urgent.

solved it!
1) Suppress DEFAULT save message
if form_failure then
raise form_trigger_failure;
end if;
2) Place the default value before enter-query.
Ref: Title='Default value in query field in ENTER_QUERY mode' in designer forum by CVZ
form level trigger
============
WHEN-NEW-ITEM-INSTANCE
=======================
if :system.mode = 'ENTER-QUERY' then
:block.item := 'default waarde';
end if;
3) Suppress the changes whenever leaving the default field.
if :block.item is null then
-- assign statement
end if;

How to write the sql statement of my finder function in cmp?

hi,
I create a cmp ejb from table INFOCOLUMN,and I create a my finder function ,which sql statement is :
select * from INFOCOLUMN WHERE employee_id=id
employee_id is a column of the table,and id is the finder function parameter.
The error is : invalid column name
So,how to write the sql statement.
Thanks .

Mole-
Bind variables are of the form $1, $2, etc., so your query stmt should look like:
select * from INFOCOLUMN WHERE employee_id=$1
-Jon

Urgent : How to do the SQL trace analysis

Hi Floks,
How to do the SQL Trace analysis and any another tools is there to test abap programming then this tools runtime analysis,extended Programming Checking,Code inspector .How to utilize that tools .please forward me
thanks
suresh

HI,
<b>SQL Trace Use:</b>
The SQL Trace function is an on-demand log of selected SQL statements that are issued against the database through the Open SQL Engine. The SQL Trace can be switched on or off dynamically. The log format is database independent. Besides the SQL statement text, each log record contains information about the point in time when the statement was executed, its duration, its input parameters and results (where applicable) as well as context information.
<b>
Features</b>
The SQL Trace is especially useful for:
Development
SQL Trace can help JDO, enterprise beans, servlet and JSP developers to learn which kind of database accesses their code produces.
1. Performance analysis
Typically, performance issues are caused by inefficient database accesses. In this case SQL Trace can be used to show the issued SQL statements and their duration, thus helping to identify inefficient SQL statements.
<b>Activities</b>
Typically, you should use the SQL Trace when you need to check the behavior of a particular application. This is the following scenario:
Look at the below links, you will get the idea
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801f89454211d189710000e8322d00/content.htm
Re: Runtime Analysis vs SQL Trace
http://www.sapbrain.com/TOOLS/SQLTRACE/SQL_TRACE.html

How to invoke the softKeyboard for a TLF textfield in AS3?

Hi,
I need to use a TLF textfield in a Flash mobile app.
How to invoke the softKeyboard on mobile devices for such a TLF textfield? I tried it the way below, but it's not showing up:
import flash.ui.Keyboard;
import flash.events.KeyboardEvent;
import flash.events.SoftKeyboardEvent;
chat.needsSoftKeyboard = true
chat.requestSoftKeyboard()
(I can't use a "classic textfield" for a couple of reasons)
Any tips welcome

If you had something like this :
<FORM name="checkform">
<input type="text" name="myText" size="5">
<select size="1" name="select" onChange="check()">
<option value="1">Number1
<option value="2" selected>Number2
</select>
</FORM>Your javascript funtion would look like this :
<script language="JavaScript">
function check() {
     if (this.checkform.select.options[this.checkform.select.selectedIndex].value == "1") {
          this.checkform.myText.size = "20"
     } else {
          this.checkform.myText.size = "5"
</script>Note the names of the form (checkform) and the input field (myText).

How to invoke the OAM from Linux

Hey apps gurs
any one can tell me,how to invoke the OAM

OAM is not an .exe but a webpage
So, you must have an url to startup OAM

When a context node use non-singleton, how to invoke the supply funtion eve

when a context node use non-singleton, how to invoke the supply funtion everytime the lead selection is changed ?

Hi wei,
<b>Non-singleton nodes:</b>
Web Dynpro allows you to define non-singleton nodes. Each non-singleton node has one node instance for each node element of the parent collection at runtime. The advantage is that each instance can be accessed directly. When using non-singleton nodes, the nodes are only created when the node values are retrieved. This can save resources that otherwise would slow down the performance of the application.
<b>Supply function:</b>
The Web Dynpro tools also automatically enhance the corresponding controller class with a supply function including the user coding area contained in it
Supply functions are implemented as methods of type
<b>public void supplyChildNodeElements(SomeChildNode node,
SomeParentNodeElement)</b>
in a Web Dynpro controller (view controller or custom controller). Supply functions and context nodes have a 1..1 relationship, that is, supply functions are specific for individual context nodes. Under certain conditions, supply functions are called by pages in the Web Dynpro runtime environment.
Hope this helps u,
Regards,
Nagarajan.

How to invoke the app by touching the screen (without using the home button)

Kindly provide the solutions for the following issues
1. How to invoke the app by touching the screen (without using the home button)
2. Estimated lifespan running an iPad3 continuously 24x7
awaiting for your valuable response.
Thanks and regards,
Sathya.

1. You can only invoke an app by touching its icon.
2. All depends on what your app does.

How to invoke the Cash Drawer to be open by java code.

hi friends,
how to invoke the Cash Drawer and display pole to be open by java code.
pls help me out.

hello,
you need to dig out that in the cash drawer APIs there must be some method responsible for opening the cash drawer
that will supply the operational voltage signal internally to the cash drawer.
your task is to use the API os the cash drawer and supply the arguments in.
and will you please tell us what communincation mode you are using like com port or usb.

How to run the SQL Script in SQL Prompt?

Hi ExpertGroup,
I have written one SQL Script name called "MySQLSCript.SQL". I want to know how to run the SQL Script in SQL Prompt?.
Generally, I run SQL Script in PL/SQL Developer tool. But In this case, some SET command is not working/supporting in PL/SQL Developer Tool.
Let me know, How to Run in SQl Prompt.
Thanks & Regards,
Senthil K Kumar.

This is my SQL Script....
SET COLSEP '|'
SET LINESIZE 32767
SET PAGESIZE 50000
/* SET LINESIZE 3000
SET PAGESIZE 50000
SET DEFINE OFF */
SET ECHO OFF
SET FEEDBACK OFF
--SET HEADING OFF
SET TRIMSPOOL ON
SET NEWPAGE NONE
SET UNDERLINE OFF
SPOOL &&EnterPath;
SELECT * FROM &&TableName;
SPOOL OFF
SET FEEDBACK ON
--SET DEFINE ON
PROMPT Done.
I am able to run this script in SQL Prompt....
Its executing fine...
But, If I am executing again it maynot asking for new set of data....
alternativily its taking old values only.....
how can i exeute with new set of data in the sql prompt.....

How to access the sql database in applet?

How to access the sql database in applet?
Please help me.

import java.applet.*;
import java.awl.*;
import java.sql.*;
//other packages
public class jdb extends Applet
Connection con;
Statement stmt;
String name="drvijay";
String phoneno="9842088860";
public void init(){}
pubilc void stop(){}
public void destroy(){}
public void start()
call();
public void call()
try{
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          conn=DriverManager.getConnection("Jdbc:Odbc:emp","sa","");
          stmt=conn.createStatement();
          stmt.executeUpdate("insert into empdetails(name,phoneno) values ('"+name + "',''"+ phoneno +"' )" );
          }catch(SQLException e)
               System.out.println("error"+e);
               System.exit(0);
//<applet code="jdb" height="200" width="200"> </applet>
u this jdbc statement in any of the method..
*/

How to invoke the sql lodaer?

Similar Messages

Maybe you are looking for